Skip to content

Commit

Permalink
✨ Add ALLOW_LOW_EJERK option
Browse files Browse the repository at this point in the history 
MarlinFirmware/Marlin#23054
  • Loading branch information
@thinkyhead
thinkyhead committed Nov 2, 2021
1 parent 50b531b commit 29f1f5c
Show file tree
Hide file tree
Showing 262 changed files with 262 additions and 0 deletions.
1 change: 1 addition & 0 deletions config/default/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1923,6 +1923,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Alfawise/U20/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1914,6 +1914,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/A2/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/A2plus/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/A6/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/A8/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/A8plus/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/A9/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/E10/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/E16/Stock/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/ET4+/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/ET4-Pro/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/ET4/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/ET4X/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/ET5-Pro/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.00 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/ET5/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.00 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Anet/ET5X/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.00 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/AnyCubic/Chiron/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.05 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/AnyCubic/i3 Mega/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/AnyCubic/i3/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/ArmEd/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1917,6 +1917,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Artillery/Genius/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Artillery/Sidewinder X1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.2 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Azteeg/X5GT/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/BIBO/TouchX/default/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1906,6 +1906,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/BIQU/B1-BLTouch/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/BIQU/B1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/BQ/Hephestos/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/BQ/Hephestos_2/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1921,6 +1921,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/BQ/WITBOX/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/CTC/A13/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Cartesio/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
1 change: 1 addition & 0 deletions config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1913,6 +1913,7 @@
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#endif

// @section leveling
Expand Down
Loading

0 comments on commit 29f1f5c

Please sign in to comment.