🎨 Add temp sensor conditions

MarlinFirmware/Marlin#24528
MarlinFirmware · Aug 4, 2022 · 2e46fc8 · 2e46fc8
1 parent 48ffab7
commit 2e46fc8
Show file tree

Hide file tree

Showing 315 changed files with 8,190 additions and 5,040 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -552,22 +552,32 @@
 #define DUMMY_THERMISTOR_999_VALUE 100
 
 // Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1
-//#define MAX31865_SENSOR_OHMS_0      100   // (Ω) Typically 100 or 1000 (PT100 or PT1000)
-//#define MAX31865_CALIBRATION_OHMS_0 430   // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
-//#define MAX31865_SENSOR_OHMS_1      100
-//#define MAX31865_CALIBRATION_OHMS_1 430
-
-#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
-
-#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
-
-#define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#if TEMP_SENSOR_IS_MAX_TC(0)
+  #define MAX31865_SENSOR_OHMS_0      100 // (Ω) Typically 100 or 1000 (PT100 or PT1000)
+  #define MAX31865_CALIBRATION_OHMS_0 430 // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
+#endif
+#if TEMP_SENSOR_IS_MAX_TC(1)
+  #define MAX31865_SENSOR_OHMS_1      100
+  #define MAX31865_CALIBRATION_OHMS_1 430
+#endif
+
+#if HAS_E_TEMP_SENSOR
+  #define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+  #define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
+
+#if TEMP_SENSOR_BED
+  #define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
+  #define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
+
+#if TEMP_SENSOR_CHAMBER
+  #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
+  #define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
 
 /**
  * Redundant Temperature Sensor (TEMP_SENSOR_REDUNDANT)

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -553,22 +553,32 @@
 #define DUMMY_THERMISTOR_999_VALUE 100
 
 // Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1
-//#define MAX31865_SENSOR_OHMS_0      100   // (Ω) Typically 100 or 1000 (PT100 or PT1000)
-//#define MAX31865_CALIBRATION_OHMS_0 430   // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
-//#define MAX31865_SENSOR_OHMS_1      100
-//#define MAX31865_CALIBRATION_OHMS_1 430
-
-#define TEMP_RESIDENCY_TIME          5  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
-
-#define TEMP_BED_RESIDENCY_TIME      5  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
-
-#define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#if TEMP_SENSOR_IS_MAX_TC(0)
+  #define MAX31865_SENSOR_OHMS_0      100 // (Ω) Typically 100 or 1000 (PT100 or PT1000)
+  #define MAX31865_CALIBRATION_OHMS_0 430 // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
+#endif
+#if TEMP_SENSOR_IS_MAX_TC(1)
+  #define MAX31865_SENSOR_OHMS_1      100
+  #define MAX31865_CALIBRATION_OHMS_1 430
+#endif
+
+#if HAS_E_TEMP_SENSOR
+  #define TEMP_RESIDENCY_TIME          5  // (seconds) Time to wait for hotend to "settle" in M109
+  #define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
+
+#if TEMP_SENSOR_BED
+  #define TEMP_BED_RESIDENCY_TIME      5  // (seconds) Time to wait for bed to "settle" in M190
+  #define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
+
+#if TEMP_SENSOR_CHAMBER
+  #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
+  #define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
 
 /**
  * Redundant Temperature Sensor (TEMP_SENSOR_REDUNDANT)

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -552,22 +552,32 @@
 #define DUMMY_THERMISTOR_999_VALUE 100
 
 // Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1
-//#define MAX31865_SENSOR_OHMS_0      100   // (Ω) Typically 100 or 1000 (PT100 or PT1000)
-//#define MAX31865_CALIBRATION_OHMS_0 430   // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
-//#define MAX31865_SENSOR_OHMS_1      100
-//#define MAX31865_CALIBRATION_OHMS_1 430
-
-#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
-
-#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
-
-#define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#if TEMP_SENSOR_IS_MAX_TC(0)
+  #define MAX31865_SENSOR_OHMS_0      100 // (Ω) Typically 100 or 1000 (PT100 or PT1000)
+  #define MAX31865_CALIBRATION_OHMS_0 430 // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
+#endif
+#if TEMP_SENSOR_IS_MAX_TC(1)
+  #define MAX31865_SENSOR_OHMS_1      100
+  #define MAX31865_CALIBRATION_OHMS_1 430
+#endif
+
+#if HAS_E_TEMP_SENSOR
+  #define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+  #define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
+
+#if TEMP_SENSOR_BED
+  #define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
+  #define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
+
+#if TEMP_SENSOR_CHAMBER
+  #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
+  #define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
 
 /**
  * Redundant Temperature Sensor (TEMP_SENSOR_REDUNDANT)

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -552,22 +552,32 @@
 #define DUMMY_THERMISTOR_999_VALUE 100
 
 // Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1
-//#define MAX31865_SENSOR_OHMS_0      100   // (Ω) Typically 100 or 1000 (PT100 or PT1000)
-//#define MAX31865_CALIBRATION_OHMS_0 430   // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
-//#define MAX31865_SENSOR_OHMS_1      100
-//#define MAX31865_CALIBRATION_OHMS_1 430
-
-#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
-
-#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
-
-#define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#if TEMP_SENSOR_IS_MAX_TC(0)
+  #define MAX31865_SENSOR_OHMS_0      100 // (Ω) Typically 100 or 1000 (PT100 or PT1000)
+  #define MAX31865_CALIBRATION_OHMS_0 430 // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
+#endif
+#if TEMP_SENSOR_IS_MAX_TC(1)
+  #define MAX31865_SENSOR_OHMS_1      100
+  #define MAX31865_CALIBRATION_OHMS_1 430
+#endif
+
+#if HAS_E_TEMP_SENSOR
+  #define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+  #define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
+
+#if TEMP_SENSOR_BED
+  #define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
+  #define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
+
+#if TEMP_SENSOR_CHAMBER
+  #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
+  #define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
 
 /**
  * Redundant Temperature Sensor (TEMP_SENSOR_REDUNDANT)

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -607,22 +607,32 @@
 #define DUMMY_THERMISTOR_999_VALUE 100
 
 // Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1
-//#define MAX31865_SENSOR_OHMS_0      100   // (Ω) Typically 100 or 1000 (PT100 or PT1000)
-//#define MAX31865_CALIBRATION_OHMS_0 430   // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
-//#define MAX31865_SENSOR_OHMS_1      100
-//#define MAX31865_CALIBRATION_OHMS_1 430
-
-#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
-
-#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
-
-#define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#if TEMP_SENSOR_IS_MAX_TC(0)
+  #define MAX31865_SENSOR_OHMS_0      100 // (Ω) Typically 100 or 1000 (PT100 or PT1000)
+  #define MAX31865_CALIBRATION_OHMS_0 430 // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
+#endif
+#if TEMP_SENSOR_IS_MAX_TC(1)
+  #define MAX31865_SENSOR_OHMS_1      100
+  #define MAX31865_CALIBRATION_OHMS_1 430
+#endif
+
+#if HAS_E_TEMP_SENSOR
+  #define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+  #define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
+
+#if TEMP_SENSOR_BED
+  #define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
+  #define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
+
+#if TEMP_SENSOR_CHAMBER
+  #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
+  #define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
 
 /**
  * Redundant Temperature Sensor (TEMP_SENSOR_REDUNDANT)

diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
@@ -607,22 +607,32 @@
 #define DUMMY_THERMISTOR_999_VALUE 100
 
 // Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1
-//#define MAX31865_SENSOR_OHMS_0      100   // (Ω) Typically 100 or 1000 (PT100 or PT1000)
-//#define MAX31865_CALIBRATION_OHMS_0 430   // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
-//#define MAX31865_SENSOR_OHMS_1      100
-//#define MAX31865_CALIBRATION_OHMS_1 430
-
-#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
-
-#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
-
-#define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#if TEMP_SENSOR_IS_MAX_TC(0)
+  #define MAX31865_SENSOR_OHMS_0      100 // (Ω) Typically 100 or 1000 (PT100 or PT1000)
+  #define MAX31865_CALIBRATION_OHMS_0 430 // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
+#endif
+#if TEMP_SENSOR_IS_MAX_TC(1)
+  #define MAX31865_SENSOR_OHMS_1      100
+  #define MAX31865_CALIBRATION_OHMS_1 430
+#endif
+
+#if HAS_E_TEMP_SENSOR
+  #define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+  #define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
+
+#if TEMP_SENSOR_BED
+  #define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
+  #define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
+
+#if TEMP_SENSOR_CHAMBER
+  #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
+  #define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
 
 /**
  * Redundant Temperature Sensor (TEMP_SENSOR_REDUNDANT)

diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
@@ -552,22 +552,32 @@
 #define DUMMY_THERMISTOR_999_VALUE 100
 
 // Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1
-//#define MAX31865_SENSOR_OHMS_0      100   // (Ω) Typically 100 or 1000 (PT100 or PT1000)
-//#define MAX31865_CALIBRATION_OHMS_0 430   // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
-//#define MAX31865_SENSOR_OHMS_1      100
-//#define MAX31865_CALIBRATION_OHMS_1 430
-
-#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
-
-#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
-
-#define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#if TEMP_SENSOR_IS_MAX_TC(0)
+  #define MAX31865_SENSOR_OHMS_0      100 // (Ω) Typically 100 or 1000 (PT100 or PT1000)
+  #define MAX31865_CALIBRATION_OHMS_0 430 // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
+#endif
+#if TEMP_SENSOR_IS_MAX_TC(1)
+  #define MAX31865_SENSOR_OHMS_1      100
+  #define MAX31865_CALIBRATION_OHMS_1 430
+#endif
+
+#if HAS_E_TEMP_SENSOR
+  #define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+  #define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
+
+#if TEMP_SENSOR_BED
+  #define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
+  #define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
+
+#if TEMP_SENSOR_CHAMBER
+  #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
+  #define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+  #define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#endif
 
 /**
  * Redundant Temperature Sensor (TEMP_SENSOR_REDUNDANT)