Skip to content

Commit

Permalink
📝 ESP32 Hardware PWM
Browse files Browse the repository at this point in the history 
MarlinFirmware/Marlin#23802
  • Loading branch information
@thinkyhead
thinkyhead committed Mar 25, 2022
1 parent b05535f commit 4237f2e
Show file tree
Hide file tree
Showing 278 changed files with 278 additions and 278 deletions.
2 changes: 1 addition & 1 deletion config/default/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3486,7 +3486,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Alfawise/U20/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3477,7 +3477,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3478,7 +3478,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/A2/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/A2plus/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/A6/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/A8/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/A8plus/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/A9/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/E10/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/E16/Stock/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/ET4+/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/ET4-Pro/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/ET4/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/ET4X/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/ET5-Pro/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/ET5/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/ET5X/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AnyCubic/Chiron/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AnyCubic/i3 Mega/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AnyCubic/i3/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3476,7 +3476,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
2 changes: 1 addition & 1 deletion config/examples/ArmEd/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3480,7 +3480,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif

//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
Expand Down
Loading

0 comments on commit 4237f2e

Please sign in to comment.