🔧 Clarify axis disable / timeout

MarlinFirmware/Marlin#25571
MarlinFirmware · Mar 26, 2023 · 615582d · 615582d
1 parent ac7195c
commit 615582d
Show file tree

Hide file tree

Showing 341 changed files with 693 additions and 692 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -1146,19 +1146,20 @@
 
 /**
  * Idle Stepper Shutdown
- * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
- * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
+ * Enable DISABLE_IDLE_* to shut down axis steppers after an idle period.
+ * The default timeout duration can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X
-#define DISABLE_INACTIVE_Y
-#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
-//#define DISABLE_INACTIVE_I
-//#define DISABLE_INACTIVE_J
-//#define DISABLE_INACTIVE_K
-//#define DISABLE_INACTIVE_U
-//#define DISABLE_INACTIVE_V
-//#define DISABLE_INACTIVE_W
+#define DEFAULT_STEPPER_TIMEOUT_SEC 120
+#define DISABLE_IDLE_X
+#define DISABLE_IDLE_Y
+#define DISABLE_IDLE_Z    // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_IDLE_I
+//#define DISABLE_IDLE_J
+//#define DISABLE_IDLE_K
+//#define DISABLE_IDLE_U
+//#define DISABLE_IDLE_V
+//#define DISABLE_IDLE_W
+#define DISABLE_IDLE_E    // Shut down all idle extruders
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -1717,8 +1717,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -1784,8 +1784,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
@@ -1785,8 +1785,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -1716,8 +1716,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
@@ -1751,8 +1751,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
@@ -1718,8 +1718,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
@@ -1717,8 +1717,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h
@@ -1717,8 +1717,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h
@@ -1717,8 +1717,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h
@@ -1721,8 +1721,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h
@@ -1721,8 +1721,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h
@@ -1721,8 +1721,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h
@@ -1721,8 +1721,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h
@@ -1718,8 +1718,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h
@@ -1716,8 +1716,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h
@@ -1716,8 +1716,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/AnyCubic/Vyper/Configuration.h b/config/examples/AnyCubic/Vyper/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h
@@ -1766,8 +1766,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h
@@ -1731,8 +1731,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
@@ -1716,8 +1716,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion