✨ CAPABILITIES_REPORT

MarlinFirmware/Marlin#26626
MarlinFirmware · Jan 4, 2024 · 726bdfe · 726bdfe
1 parent 5ab016f
commit 726bdfe
Show file tree

Hide file tree

Showing 358 changed files with 14,678 additions and 15,019 deletions.
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -3867,38 +3867,6 @@
  */
 //#define CNC_DRILLING_CYCLE
 
-// @section reporting
-
-/**
- * Auto-report fan speed with M123 S<seconds>
- * Requires fans with tachometer pins
- */
-//#define AUTO_REPORT_FANS
-
-/**
- * Auto-report temperatures with M155 S<seconds>
- */
-#define AUTO_REPORT_TEMPERATURES
-#if ENABLED(AUTO_REPORT_TEMPERATURES) && TEMP_SENSOR_REDUNDANT
-  //#define AUTO_REPORT_REDUNDANT // Include the "R" sensor in the auto-report
-#endif
-
-/**
- * Auto-report position with M154 S<seconds>
- */
-//#define AUTO_REPORT_POSITION
-#if ENABLED(AUTO_REPORT_POSITION)
-  //#define AUTO_REPORT_REAL_POSITION // Auto-report the real position
-#endif
-
-/**
- * Include capabilities in M115 output
- */
-#define EXTENDED_CAPABILITIES_REPORT
-#if ENABLED(EXTENDED_CAPABILITIES_REPORT)
-  //#define M115_GEOMETRY_REPORT
-#endif
-
 // @section security
 
 /**
@@ -3941,13 +3909,50 @@
 
 // @section reporting
 
-// Extra options for the M114 "Current Position" report
+/**
+ * Extra options for the M114 "Current Position" report
+ */
 //#define M114_DETAIL         // Use 'M114` for details to check planner calculations
 //#define M114_REALTIME       // Real current position based on forward kinematics
 //#define M114_LEGACY         // M114 used to synchronize on every call. Enable if needed.
 
+/**
+ * Auto-report fan speed with M123 S<seconds>
+ * Requires fans with tachometer pins
+ */
+//#define AUTO_REPORT_FANS
+
 //#define REPORT_FAN_CHANGE   // Report the new fan speed when changed by M106 (and others)
 
+/**
+ * Auto-report temperatures with M155 S<seconds>
+ */
+#define AUTO_REPORT_TEMPERATURES
+#if ENABLED(AUTO_REPORT_TEMPERATURES) && TEMP_SENSOR_REDUNDANT
+  //#define AUTO_REPORT_REDUNDANT // Include the "R" sensor in the auto-report
+#endif
+
+/**
+ * Auto-report position with M154 S<seconds>
+ */
+//#define AUTO_REPORT_POSITION
+#if ENABLED(AUTO_REPORT_POSITION)
+  //#define AUTO_REPORT_REAL_POSITION // Auto-report the real position
+#endif
+
+/**
+ * M115 - Report capabilites. Disable to save ~1150 bytes of flash.
+ *        Some hosts (and serial TFT displays) rely on this feature.
+ */
+#define CAPABILITIES_REPORT
+#if ENABLED(CAPABILITIES_REPORT)
+  // Include capabilities in M115 output
+  #define EXTENDED_CAPABILITIES_REPORT
+  #if ENABLED(EXTENDED_CAPABILITIES_REPORT)
+    //#define M115_GEOMETRY_REPORT
+  #endif
+#endif
+
 // @section gcode
 
 /**
@@ -3959,7 +3964,9 @@
   //#define GCODE_QUOTED_STRINGS  // Support for quoted string parameters
 #endif
 
-// Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
+/**
+ * Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
+ */
 //#define MEATPACK_ON_SERIAL_PORT_1
 //#define MEATPACK_ON_SERIAL_PORT_2
 
@@ -3973,12 +3980,6 @@
  */
 #define DEBUG_FLAGS_GCODE
 
-/**
- * M115 - Report capabilites. Disable to save ~1150 bytes of flash.
- *        Some hosts (and serial TFT displays) rely on this feature.
- */
-#define REPORT_CAPABILITIES_GCODE
-
 /**
  * Enable this option for a leaner build of Marlin that removes
  * workspace offsets to slightly optimize performance.
@@ -4007,8 +4008,6 @@
 #endif
 //#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
 
-// @section gcode
-
 /**
  * Startup commands
  *

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -3868,38 +3868,6 @@
  */
 //#define CNC_DRILLING_CYCLE
 
-// @section reporting
-
-/**
- * Auto-report fan speed with M123 S<seconds>
- * Requires fans with tachometer pins
- */
-//#define AUTO_REPORT_FANS
-
-/**
- * Auto-report temperatures with M155 S<seconds>
- */
-#define AUTO_REPORT_TEMPERATURES
-#if ENABLED(AUTO_REPORT_TEMPERATURES) && TEMP_SENSOR_REDUNDANT
-  //#define AUTO_REPORT_REDUNDANT // Include the "R" sensor in the auto-report
-#endif
-
-/**
- * Auto-report position with M154 S<seconds>
- */
-//#define AUTO_REPORT_POSITION
-#if ENABLED(AUTO_REPORT_POSITION)
-  //#define AUTO_REPORT_REAL_POSITION // Auto-report the real position
-#endif
-
-/**
- * Include capabilities in M115 output
- */
-#define EXTENDED_CAPABILITIES_REPORT
-#if ENABLED(EXTENDED_CAPABILITIES_REPORT)
-  //#define M115_GEOMETRY_REPORT
-#endif
-
 // @section security
 
 /**
@@ -3942,13 +3910,50 @@
 
 // @section reporting
 
-// Extra options for the M114 "Current Position" report
+/**
+ * Extra options for the M114 "Current Position" report
+ */
 //#define M114_DETAIL         // Use 'M114` for details to check planner calculations
 //#define M114_REALTIME       // Real current position based on forward kinematics
 //#define M114_LEGACY         // M114 used to synchronize on every call. Enable if needed.
 
+/**
+ * Auto-report fan speed with M123 S<seconds>
+ * Requires fans with tachometer pins
+ */
+//#define AUTO_REPORT_FANS
+
 //#define REPORT_FAN_CHANGE   // Report the new fan speed when changed by M106 (and others)
 
+/**
+ * Auto-report temperatures with M155 S<seconds>
+ */
+#define AUTO_REPORT_TEMPERATURES
+#if ENABLED(AUTO_REPORT_TEMPERATURES) && TEMP_SENSOR_REDUNDANT
+  //#define AUTO_REPORT_REDUNDANT // Include the "R" sensor in the auto-report
+#endif
+
+/**
+ * Auto-report position with M154 S<seconds>
+ */
+//#define AUTO_REPORT_POSITION
+#if ENABLED(AUTO_REPORT_POSITION)
+  //#define AUTO_REPORT_REAL_POSITION // Auto-report the real position
+#endif
+
+/**
+ * M115 - Report capabilites. Disable to save ~1150 bytes of flash.
+ *        Some hosts (and serial TFT displays) rely on this feature.
+ */
+#define CAPABILITIES_REPORT
+#if ENABLED(CAPABILITIES_REPORT)
+  // Include capabilities in M115 output
+  #define EXTENDED_CAPABILITIES_REPORT
+  #if ENABLED(EXTENDED_CAPABILITIES_REPORT)
+    //#define M115_GEOMETRY_REPORT
+  #endif
+#endif
+
 // @section gcode
 
 /**
@@ -3960,7 +3965,9 @@
   //#define GCODE_QUOTED_STRINGS  // Support for quoted string parameters
 #endif
 
-// Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
+/**
+ * Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
+ */
 //#define MEATPACK_ON_SERIAL_PORT_1
 //#define MEATPACK_ON_SERIAL_PORT_2
 
@@ -3974,12 +3981,6 @@
  */
 #define DEBUG_FLAGS_GCODE
 
-/**
- * M115 - Report capabilites. Disable to save ~1150 bytes of flash.
- *        Some hosts (and serial TFT displays) rely on this feature.
- */
-#define REPORT_CAPABILITIES_GCODE
-
 /**
  * Enable this option for a leaner build of Marlin that removes
  * workspace offsets to slightly optimize performance.
@@ -4008,8 +4009,6 @@
 #endif
 //#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
 
-// @section gcode
-
 /**
  * Startup commands
  *

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
@@ -3868,38 +3868,6 @@
  */
 //#define CNC_DRILLING_CYCLE
 
-// @section reporting
-
-/**
- * Auto-report fan speed with M123 S<seconds>
- * Requires fans with tachometer pins
- */
-//#define AUTO_REPORT_FANS
-
-/**
- * Auto-report temperatures with M155 S<seconds>
- */
-#define AUTO_REPORT_TEMPERATURES
-#if ENABLED(AUTO_REPORT_TEMPERATURES) && TEMP_SENSOR_REDUNDANT
-  //#define AUTO_REPORT_REDUNDANT // Include the "R" sensor in the auto-report
-#endif
-
-/**
- * Auto-report position with M154 S<seconds>
- */
-//#define AUTO_REPORT_POSITION
-#if ENABLED(AUTO_REPORT_POSITION)
-  //#define AUTO_REPORT_REAL_POSITION // Auto-report the real position
-#endif
-
-/**
- * Include capabilities in M115 output
- */
-#define EXTENDED_CAPABILITIES_REPORT
-#if ENABLED(EXTENDED_CAPABILITIES_REPORT)
-  //#define M115_GEOMETRY_REPORT
-#endif
-
 // @section security
 
 /**
@@ -3942,13 +3910,50 @@
 
 // @section reporting
 
-// Extra options for the M114 "Current Position" report
+/**
+ * Extra options for the M114 "Current Position" report
+ */
 //#define M114_DETAIL         // Use 'M114` for details to check planner calculations
 //#define M114_REALTIME       // Real current position based on forward kinematics
 //#define M114_LEGACY         // M114 used to synchronize on every call. Enable if needed.
 
+/**
+ * Auto-report fan speed with M123 S<seconds>
+ * Requires fans with tachometer pins
+ */
+//#define AUTO_REPORT_FANS
+
 //#define REPORT_FAN_CHANGE   // Report the new fan speed when changed by M106 (and others)
 
+/**
+ * Auto-report temperatures with M155 S<seconds>
+ */
+#define AUTO_REPORT_TEMPERATURES
+#if ENABLED(AUTO_REPORT_TEMPERATURES) && TEMP_SENSOR_REDUNDANT
+  //#define AUTO_REPORT_REDUNDANT // Include the "R" sensor in the auto-report
+#endif
+
+/**
+ * Auto-report position with M154 S<seconds>
+ */
+//#define AUTO_REPORT_POSITION
+#if ENABLED(AUTO_REPORT_POSITION)
+  //#define AUTO_REPORT_REAL_POSITION // Auto-report the real position
+#endif
+
+/**
+ * M115 - Report capabilites. Disable to save ~1150 bytes of flash.
+ *        Some hosts (and serial TFT displays) rely on this feature.
+ */
+#define CAPABILITIES_REPORT
+#if ENABLED(CAPABILITIES_REPORT)
+  // Include capabilities in M115 output
+  #define EXTENDED_CAPABILITIES_REPORT
+  #if ENABLED(EXTENDED_CAPABILITIES_REPORT)
+    //#define M115_GEOMETRY_REPORT
+  #endif
+#endif
+
 // @section gcode
 
 /**
@@ -3960,7 +3965,9 @@
   //#define GCODE_QUOTED_STRINGS  // Support for quoted string parameters
 #endif
 
-// Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
+/**
+ * Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
+ */
 //#define MEATPACK_ON_SERIAL_PORT_1
 //#define MEATPACK_ON_SERIAL_PORT_2
 
@@ -3974,12 +3981,6 @@
  */
 #define DEBUG_FLAGS_GCODE
 
-/**
- * M115 - Report capabilites. Disable to save ~1150 bytes of flash.
- *        Some hosts (and serial TFT displays) rely on this feature.
- */
-#define REPORT_CAPABILITIES_GCODE
-
 /**
  * Enable this option for a leaner build of Marlin that removes
  * workspace offsets to slightly optimize performance.
@@ -4008,8 +4009,6 @@
 #endif
 //#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
 
-// @section gcode
-
 /**
  * Startup commands
  *