✨ PROBE_OFFSET_[XYZ](MIN|MAX)

MarlinFirmware/Marlin#26267
MarlinFirmware · Oct 28, 2023 · f61964d · f61964d
1 parent 6c2d6e1
commit f61964d
Show file tree

Hide file tree

Showing 354 changed files with 2,478 additions and 1,062 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -1661,9 +1661,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -1663,9 +1663,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -1661,9 +1661,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -1661,9 +1661,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -1730,9 +1730,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 #define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
@@ -1731,9 +1731,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
@@ -1661,9 +1661,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -1662,9 +1662,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
@@ -1661,9 +1661,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
@@ -1661,9 +1661,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
@@ -1698,9 +1698,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
@@ -1664,9 +1664,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
@@ -1663,9 +1663,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h
@@ -1661,9 +1661,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h
@@ -1661,9 +1661,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h
@@ -1663,9 +1663,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h
@@ -1663,9 +1663,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h
@@ -1667,9 +1667,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h
@@ -1667,9 +1667,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h
@@ -1667,9 +1667,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h
@@ -1667,9 +1667,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h
@@ -1661,9 +1661,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 #define Z_MIN_PROBE_REPEATABILITY_TEST

diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h
@@ -1661,9 +1661,13 @@
 
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
-// For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN  -20 // (mm)
-#define Z_PROBE_OFFSET_RANGE_MAX   20 // (mm)
+// For M851 provide ranges for adjusting the X, Y, and Z probe offsets
+//#define PROBE_OFFSET_XMIN -50   // (mm)
+//#define PROBE_OFFSET_XMAX  50   // (mm)
+//#define PROBE_OFFSET_YMIN -50   // (mm)
+//#define PROBE_OFFSET_YMAX  50   // (mm)
+//#define PROBE_OFFSET_ZMIN -20   // (mm)
+//#define PROBE_OFFSET_ZMAX  20   // (mm)
 
 // Enable the M48 repeatability test to test probe accuracy
 #define Z_MIN_PROBE_REPEATABILITY_TEST