Add ESP32 WiFi interface (#11209)

.travis.yml

@@ -23,6 +23,7 @@ env:
   #- TEST_PLATFORM="STM32F1"
   - TEST_PLATFORM="teensy35"
   - TEST_PLATFORM="linux_native"
+  - TEST_PLATFORM="esp32"
 
 addons:
   apt:

Marlin/Configuration_adv.h

@@ -2228,6 +2228,8 @@
 #if ENABLED(WIFISUPPORT)
   #define WIFI_SSID "Wifi SSID"
   #define WIFI_PWD  "Wifi Password"
+  //#define WEBSUPPORT        // Start a webserver with auto-discovery
+  //#define OTASUPPORT        // Support over-the-air firmware updates
 #endif
 
 /**

Marlin/src/HAL/HAL_ESP32/HAL.cpp

@@ -34,7 +34,14 @@
 #include "../../inc/MarlinConfigPre.h"
 
 #if ENABLED(WIFISUPPORT)
-  #include "ota.h"
+  #include <ESPAsyncWebServer.h>
+  #include "wifi.h"
+  #if ENABLED(OTASUPPORT)
+    #include "ota.h"
+  #endif
+  #if ENABLED(WEBSUPPORT)
+    #include "web.h"
+  #endif
 #endif
 
 // --------------------------------------------------------------------------
@@ -83,14 +90,21 @@ esp_adc_cal_characteristics_t characteristics;
 
 void HAL_init(void) {
   #if ENABLED(WIFISUPPORT)
-    OTA_init();
+    wifi_init();
+    #if ENABLED(OTASUPPORT)
+      OTA_init();
+    #endif
+    #if ENABLED(WEBSUPPORT)
+      web_init();
+    #endif
+    server.begin();
   #endif
 
   i2s_init();
 }
 
 void HAL_idletask(void) {
-  #if ENABLED(WIFISUPPORT)
+  #if ENABLED(OTASUPPORT)
     OTA_handle();
   #endif
 }

Marlin/src/HAL/HAL_ESP32/HAL.h

@@ -47,14 +47,17 @@
 
 #include "HAL_timers_ESP32.h"
 
+#include "WebSocketSerial.h"
+
 // --------------------------------------------------------------------------
 // Defines
 // --------------------------------------------------------------------------
 
 extern portMUX_TYPE spinlock;
 
-#define NUM_SERIAL 1
+#define NUM_SERIAL 2
 #define MYSERIAL0 Serial
+#define MYSERIAL1 webSocketSerial
 
 #define CRITICAL_SECTION_START portENTER_CRITICAL(&spinlock)
 #define CRITICAL_SECTION_END   portEXIT_CRITICAL(&spinlock)

Marlin/src/HAL/HAL_ESP32/WebSocketSerial.cpp

@@ -0,0 +1,232 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef ARDUINO_ARCH_ESP32
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(WIFISUPPORT)
+
+#include "WebSocketSerial.h"
+#include "wifi.h"
+
+#include <AsyncTCP.h>
+#include <ESPAsyncWebServer.h>
+
+struct ring_buffer_r {
+  unsigned char buffer[RX_BUFFER_SIZE];
+  volatile ring_buffer_pos_t head, tail;
+};
+
+struct ring_buffer_t {
+  unsigned char buffer[256];
+  volatile uint8_t head, tail;
+};
+
+ring_buffer_r rx_buffer = { { 0 }, 0, 0 };
+ring_buffer_t tx_buffer = { { 0 }, 0, 0 };
+
+static bool _written;
+
+#if ENABLED(EMERGENCY_PARSER)
+  static EmergencyParser::State emergency_state; // = EP_RESET
+#endif
+
+AsyncWebSocket ws("/ws"); // access at ws://[esp ip]/ws
+
+FORCE_INLINE int next_rx_index(const int i) { return (ring_buffer_pos_t)(i + 1) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); }
+FORCE_INLINE int next_tx_index(const int i) { return (ring_buffer_pos_t)(i + 1) & (ring_buffer_pos_t)(TX_BUFFER_SIZE - 1); }
+
+static void addToBuffer(uint8_t * const data, const size_t len) {
+  for (size_t i = 0; i < len; i++) {
+    ring_buffer_pos_t h = rx_buffer.head;
+    const ring_buffer_pos_t t = rx_buffer.tail, n = next_rx_index(h);
+
+    if (n != t) { rx_buffer.buffer[h] = data[i]; h = n; }
+
+    // TODO: buffer is full, handle?
+
+    rx_buffer.head = h;
+  }
+}
+
+// Handle WebSocket event
+static void onEvent(AsyncWebSocket * server, AsyncWebSocketClient * client, AwsEventType type, void * arg, uint8_t *data, size_t len) {
+  switch (type) {
+    case WS_EVT_CONNECT: client->ping(); break; // client connected
+    case WS_EVT_DISCONNECT:                     // client disconnected
+    case WS_EVT_ERROR:                          // error was received from the other end
+    case WS_EVT_PONG: break;                    // pong message was received (in response to a ping request maybe)
+    case WS_EVT_DATA: {                         // data packet
+      AwsFrameInfo * info = (AwsFrameInfo*)arg;
+      if (info->opcode == WS_TEXT || info->message_opcode == WS_TEXT)
+        addToBuffer(data, len);
+    }
+  }
+}
+
+// Public Methods
+void WebSocketSerial::begin(const long baud_setting) {
+  ws.onEvent(onEvent);
+  server.addHandler(&ws); // attach AsyncWebSocket
+}
+
+void WebSocketSerial::end() { }
+
+int WebSocketSerial::peek(void) {
+  const int v = rx_buffer.head == rx_buffer.tail ? -1 : rx_buffer.buffer[rx_buffer.tail];
+  return v;
+}
+
+int WebSocketSerial::read(void) {
+  const ring_buffer_pos_t h = rx_buffer.head, t = rx_buffer.tail;
+  if (h == t) return -1;  // Nothing to read? Return now
+
+  const int v = rx_buffer.buffer[t];
+
+  rx_buffer.tail = (ring_buffer_pos_t)(t + 1) & (RX_BUFFER_SIZE - 1); // Advance tail
+
+  return v;
+}
+
+bool WebSocketSerial::available(void) {
+  const ring_buffer_pos_t h = rx_buffer.head, t = rx_buffer.tail;
+  return (ring_buffer_pos_t)(RX_BUFFER_SIZE + h - t) & (RX_BUFFER_SIZE - 1);
+}
+
+void WebSocketSerial::flush(void) {
+  ws.textAll("flush");
+  rx_buffer.tail = rx_buffer.head;
+}
+
+#if TX_BUFFER_SIZE
+
+  void WebSocketSerial::write(const uint8_t c) {
+    _written = true;
+
+    const uint8_t i = (tx_buffer.head + 1) & (TX_BUFFER_SIZE - 1);
+
+    // Store new char. head is always safe to move
+    tx_buffer.buffer[tx_buffer.head] = c;
+    tx_buffer.head = i;
+
+    if (c == '\n') {
+      ws.textAll(tx_buffer.buffer, tx_buffer.head);
+      tx_buffer.head = 0;
+    }
+  }
+
+  void WebSocketSerial::flushTx(void) {
+    ws.textAll("flushTx");
+    if (!_written) return;
+  }
+
+#else
+
+ //void WebSocketSerial::write(const uint8_t c) { _written = true; }
+ //void WebSocketSerial::flushTx(void) { if (!_written) return; }
+
+#endif
+
+/**
+ * Imports from print.h
+ */
+
+void WebSocketSerial::print(char c, int base) { print((long)c, base); }
+void WebSocketSerial::print(unsigned char b, int base) { print((unsigned long)b, base); }
+void WebSocketSerial::print(int n, int base) { print((long)n, base); }
+void WebSocketSerial::print(unsigned int n, int base) { print((unsigned long)n, base); }
+void WebSocketSerial::print(long n, int base) {
+  if (base == 0)
+    write(n);
+  else if (base == 10) {
+    if (n < 0) { print('-'); n = -n; }
+    printNumber(n, 10);
+  }
+  else
+    printNumber(n, base);
+}
+
+void WebSocketSerial::print(unsigned long n, int base) {
+  if (base == 0) write(n); else printNumber(n, base);
+}
+
+void WebSocketSerial::print(double n, int digits)         { printFloat(n, digits); }
+
+void WebSocketSerial::println(void)                       { print('\r'); print('\n'); }
+void WebSocketSerial::println(const String& s)            { print(s); println(); }
+void WebSocketSerial::println(const char c[])             { print(c); println(); }
+void WebSocketSerial::println(char c, int base)           { print(c, base); println(); }
+void WebSocketSerial::println(unsigned char b, int base)  { print(b, base); println(); }
+void WebSocketSerial::println(int n, int base)            { print(n, base); println(); }
+void WebSocketSerial::println(unsigned int n, int base)   { print(n, base); println(); }
+void WebSocketSerial::println(long n, int base)           { print(n, base); println(); }
+void WebSocketSerial::println(unsigned long n, int base)  { print(n, base); println(); }
+void WebSocketSerial::println(double n, int digits)       { print(n, digits); println(); }
+
+// Private Methods
+
+void WebSocketSerial::printNumber(unsigned long n, uint8_t base) {
+  if (n) {
+    unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
+    int8_t i = 0;
+    while (n) {
+      buf[i++] = n % base;
+      n /= base;
+    }
+    while (i--)
+      print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
+  }
+  else
+    print('0');
+}
+
+void WebSocketSerial::printFloat(double number, uint8_t digits) {
+  // Handle negative numbers
+  if (number < 0.0) { print('-'); number = -number; }
+
+  // Round correctly so that print(1.999, 2) prints as "2.00"
+  // Use a lookup table for performance
+  constexpr double rounds[] = { 0.5, 0.05, 0.005, 0.0005, 0.00005, 0.000005, 0.0000005, 0.00000005 };
+  number += rounds[digits];
+
+  //number += pow(10, -(digits + 1)); // slower single-line equivalent
+
+  // Extract the integer part of the number and print it
+  unsigned long int_part = (unsigned long)number;
+  print(int_part);
+
+  // Print the decimal point, but only if there are digits beyond
+  double remainder = number - (double)int_part;
+  if (digits) {
+    print('.');
+    // Extract digits from the remainder one at a time
+    while (digits--) {
+      remainder *= 10.0;
+      const int toPrint = int(remainder);
+      print(toPrint);
+      remainder -= toPrint;
+    }
+  }
+}
+
+#endif // WIFISUPPORT
+#endif // ARDUINO_ARCH_ESP32