♻️ Set Progress without LCD (#24767)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

.gitignore

@@ -147,6 +147,7 @@ vc-fileutils.settings
 imgui.ini
 eeprom.dat
 spi_flash.bin
+fs.img
 
 #cmake
 CMakeLists.txt

Marlin/Configuration_adv.h

@@ -1403,9 +1403,6 @@
   // On the Info Screen, display XY with one decimal place when possible
   //#define LCD_DECIMAL_SMALL_XY
 
-  // Add an 'M73' G-code to set the current percentage
-  //#define LCD_SET_PROGRESS_MANUALLY
-
   // Show the E position (filament used) during printing
   //#define LCD_SHOW_E_TOTAL
 
@@ -1426,37 +1423,43 @@
       //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
     #endif
     #if ENABLED(NEO2_COLOR_PRESETS)
-      #define NEO2_USER_PRESET_RED        255  // User defined RED value
-      #define NEO2_USER_PRESET_GREEN      128  // User defined GREEN value
-      #define NEO2_USER_PRESET_BLUE         0  // User defined BLUE value
-      #define NEO2_USER_PRESET_WHITE      255  // User defined WHITE value
-      #define NEO2_USER_PRESET_BRIGHTNESS 255  // User defined intensity
-      //#define NEO2_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup for the second strip
+      #define NEO2_USER_PRESET_RED        255 // User defined RED value
+      #define NEO2_USER_PRESET_GREEN      128 // User defined GREEN value
+      #define NEO2_USER_PRESET_BLUE         0 // User defined BLUE value
+      #define NEO2_USER_PRESET_WHITE      255 // User defined WHITE value
+      #define NEO2_USER_PRESET_BRIGHTNESS 255 // User defined intensity
+      //#define NEO2_USER_PRESET_STARTUP      // Have the printer display the user preset color on startup for the second strip
     #endif
   #endif
 
-#endif
+#endif // HAS_DISPLAY || DWIN_LCD_PROUI
 
-// LCD Print Progress options
-#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
-  #if CAN_SHOW_REMAINING_TIME
-    //#define SHOW_REMAINING_TIME         // Display estimated time to completion
-    #if ENABLED(SHOW_REMAINING_TIME)
-      //#define USE_M73_REMAINING_TIME    // Use remaining time from M73 command instead of estimation
-      //#define ROTATE_PROGRESS_DISPLAY   // Display (P)rogress, (E)lapsed, and (R)emaining time
-    #endif
+// Add the G-code 'M73' to set / report the current job progress
+//#define SET_PROGRESS_MANUALLY
+#if ENABLED(SET_PROGRESS_MANUALLY)
+  //#define SET_PROGRESS_PERCENT          // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
+  #if ENABLED(SET_INTERACTION_TIME)
+    #define SHOW_INTERACTION_TIME         // Display time until next user interaction ('C' = filament change)
   #endif
+  //#define M73_REPORT                    // Report progress to host with 'M73'
+#endif
 
-  #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI)
-    //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
-  #endif
+// LCD Print Progress options, multiple can be rotated depending on screen layout
+#if HAS_DISPLAY && EITHER(SDSUPPORT, SET_PROGRESS_MANUALLY)
+  #define SHOW_PROGRESS_PERCENT           // Show print progress percentage (doesn't affect progress bar)
+  #define SHOW_ELAPSED_TIME               // Display elapsed printing time (prefix 'E')
+  //#define SHOW_REMAINING_TIME           // Display estimated time to completion (prefix 'R')
+
+  //#define PRINT_PROGRESS_SHOW_DECIMALS  // Show/report progress with decimal digits, not all UIs support this
 
   #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
     //#define LCD_PROGRESS_BAR            // Show a progress bar on HD44780 LCDs for SD printing
     #if ENABLED(LCD_PROGRESS_BAR)
       #define PROGRESS_BAR_BAR_TIME 2000  // (ms) Amount of time to show the bar
       #define PROGRESS_BAR_MSG_TIME 3000  // (ms) Amount of time to show the status message
-      #define PROGRESS_MSG_EXPIRE   0     // (ms) Amount of time to retain the status message (0=forever)
+      #define PROGRESS_MSG_EXPIRE      0  // (ms) Amount of time to retain the status message (0=forever)
       //#define PROGRESS_MSG_ONCE         // Show the message for MSG_TIME then clear it
       //#define LCD_PROGRESS_BAR_TEST     // Add a menu item to test the progress bar
     #endif
@@ -1799,14 +1802,8 @@
 #endif // HAS_MARLINUI_U8GLIB
 
 #if HAS_MARLINUI_U8GLIB || IS_DWIN_MARLINUI
-  // Show SD percentage next to the progress bar
-  //#define SHOW_SD_PERCENT
-
-  // Enable to save many cycles by drawing a hollow frame on Menu Screens
-  #define MENU_HOLLOW_FRAME
-
-  // Swap the CW/CCW indicators in the graphics overlay
-  //#define OVERLAY_GFX_REVERSE
+  #define MENU_HOLLOW_FRAME           // Enable to save many cycles by drawing a hollow frame on Menu Screens
+  //#define OVERLAY_GFX_REVERSE       // Swap the CW/CCW indicators in the graphics overlay
 #endif
 
 //
@@ -2064,7 +2061,7 @@
  */
 //#define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
-  //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
+  //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L.
   #define LIN_ADVANCE_K 0.22    // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
@@ -4058,7 +4055,7 @@
 
 /**
  * Mechanical Gantry Calibration
- * Modern replacement for the Prusa TMC_Z_CALIBRATION.
+ * Modern replacement for the Průša TMC_Z_CALIBRATION.
  * Adds capability to work with any adjustable current drivers.
  * Implemented as G34 because M915 is deprecated.
  * @section calibrate

Marlin/src/MarlinCore.cpp

@@ -347,7 +347,7 @@ void startOrResumeJob() {
     TERN_(GCODE_REPEAT_MARKERS, repeat.reset());
     TERN_(CANCEL_OBJECTS, cancelable.reset());
     TERN_(LCD_SHOW_E_TOTAL, e_move_accumulator = 0);
-    #if BOTH(LCD_SET_PROGRESS_MANUALLY, USE_M73_REMAINING_TIME)
+    #if BOTH(SET_PROGRESS_MANUALLY, SET_REMAINING_TIME)
       ui.reset_remaining_time();
     #endif
   }

Marlin/src/gcode/gcode.cpp

@@ -561,8 +561,8 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
         case 48: M48(); break;                                    // M48: Z probe repeatability test
       #endif
 
-      #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
-        case 73: M73(); break;                                    // M73: Set progress percentage (for display on LCD)
+      #if ENABLED(SET_PROGRESS_MANUALLY)
+        case 73: M73(); break;                                    // M73: Set progress percentage
       #endif
 
       case 75: M75(); break;                                      // M75: Start print timer

Marlin/src/gcode/gcode.h

@@ -114,7 +114,7 @@
  * M43  - Display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins (Requires PINS_DEBUGGING)
  * M48  - Measure Z Probe repeatability: M48 P<points> X<pos> Y<pos> V<level> E<engage> L<legs> S<chizoid>. (Requires Z_MIN_PROBE_REPEATABILITY_TEST)
  *
- * M73  - Set the progress percentage. (Requires LCD_SET_PROGRESS_MANUALLY)
+ * M73  - Set the progress percentage. (Requires SET_PROGRESS_MANUALLY)
  * M75  - Start the print job timer.
  * M76  - Pause the print job timer.
  * M77  - Stop the print job timer.
@@ -677,7 +677,7 @@ class GcodeSuite {
     static void M48();
   #endif
 
-  #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
+  #if ENABLED(SET_PROGRESS_MANUALLY)
     static void M73();
   #endif
 

Marlin/src/gcode/host/M115.cpp

@@ -142,7 +142,7 @@ void GcodeSuite::M115() {
     cap_line(F("LEVELING_DATA"), ENABLED(HAS_LEVELING));
 
     // BUILD_PERCENT (M73)
-    cap_line(F("BUILD_PERCENT"), ENABLED(LCD_SET_PROGRESS_MANUALLY));
+    cap_line(F("BUILD_PERCENT"), ENABLED(SET_PROGRESS_PERCENT));
 
     // SOFTWARE_POWER (M80, M81)
     cap_line(F("SOFTWARE_POWER"), ENABLED(PSU_CONTROL));

Marlin/src/gcode/lcd/M73.cpp

@@ -22,21 +22,35 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
+#if ENABLED(SET_PROGRESS_MANUALLY)
 
 #include "../gcode.h"
 #include "../../lcd/marlinui.h"
 #include "../../sd/cardreader.h"
+#include "../../libs/numtostr.h"
 
 #if ENABLED(DWIN_LCD_PROUI)
   #include "../../lcd/e3v2/proui/dwin.h"
 #endif
 
+#if ENABLED(M73_REPORT)
+  #define M73_REPORT_PRUSA
+#endif
+
 /**
  * M73: Set percentage complete (for display on LCD)
  *
  * Example:
- *   M73 P25 ; Set progress to 25%
+ *   M73 P25.63 ; Set progress to 25.63%
+ *   M73 R456   ; Set remaining time to 456 minutes
+ *   M73 C12    ; Set next interaction countdown to 12 minutes
+ *   M73        ; Report current values
+ *
+ * Use a shorter-than-Průša report format:
+ * M73 Percent done: ---%; Time left: -----m; Change: -----m;
+ *
+ * When PRINT_PROGRESS_SHOW_DECIMALS is enabled - reports percent with 100 / 23.4 / 3.45 format
+ *
  */
 void GcodeSuite::M73() {
 
@@ -46,17 +60,39 @@ void GcodeSuite::M73() {
 
   #else
 
-    if (parser.seenval('P'))
-      ui.set_progress((PROGRESS_SCALE) > 1
-        ? parser.value_float() * (PROGRESS_SCALE)
-        : parser.value_byte()
-      );
+    #if ENABLED(SET_PROGRESS_PERCENT)
+      if (parser.seenval('P'))
+        ui.set_progress((PROGRESS_SCALE) > 1
+          ? parser.value_float() * (PROGRESS_SCALE)
+          : parser.value_byte()
+        );
+    #endif
 
-    #if ENABLED(USE_M73_REMAINING_TIME)
+    #if ENABLED(SET_REMAINING_TIME)
       if (parser.seenval('R')) ui.set_remaining_time(60 * parser.value_ulong());
     #endif
 
+    #if ENABLED(SET_INTERACTION_TIME)
+      if (parser.seenval('C')) ui.set_interaction_time(60 * parser.value_ulong());
+    #endif
+
+  #endif
+
+  #if ENABLED(M73_REPORT)
+  {
+    SERIAL_ECHO_MSG(
+        TERN(M73_REPORT_PRUSA, "M73 Percent done: ", "Progress: ")
+      , TERN(PRINT_PROGRESS_SHOW_DECIMALS, permyriadtostr4(ui.get_progress_permyriad()), ui.get_progress_percent())
+      #if ENABLED(SET_REMAINING_TIME)
+        , TERN(M73_REPORT_PRUSA, "; Print time remaining in mins: ", "%; Time left: "), ui.remaining_time / 60
+      #endif
+      #if ENABLED(SET_INTERACTION_TIME)
+        , TERN(M73_REPORT_PRUSA, "; Change in mins: ", "m; Change: "), ui.interaction_time / 60
+      #endif
+      , TERN(M73_REPORT_PRUSA, ";", "m")
+    );
+  }
   #endif
 }
 
-#endif // LCD_SET_PROGRESS_MANUALLY
+#endif // SET_PROGRESS_MANUALLY

Marlin/src/gcode/sd/M1001.cpp

@@ -34,7 +34,7 @@
   #include "../queue.h"
 #endif
 
-#if EITHER(LCD_SET_PROGRESS_MANUALLY, SD_REPRINT_LAST_SELECTED_FILE)
+#if EITHER(SET_PROGRESS_MANUALLY, SD_REPRINT_LAST_SELECTED_FILE)
   #include "../../lcd/marlinui.h"
 #endif
 
@@ -84,7 +84,7 @@ void GcodeSuite::M1001() {
   process_subcommands_now(F("M77"));
 
   // Set the progress bar "done" state
-  TERN_(LCD_SET_PROGRESS_MANUALLY, ui.set_progress_done());
+  TERN_(SET_PROGRESS_PERCENT, ui.set_progress_done());
 
   // Announce SD file completion
   {

Marlin/src/gcode/sd/M23.cpp

@@ -38,7 +38,7 @@ void GcodeSuite::M23() {
   for (char *fn = parser.string_arg; *fn; ++fn) if (*fn == ' ') *fn = '\0';
   card.openFileRead(parser.string_arg);
 
-  TERN_(LCD_SET_PROGRESS_MANUALLY, ui.set_progress(0));
+  TERN_(SET_PROGRESS_PERCENT, ui.set_progress(0));
 }
 
 #endif // SDSUPPORT

Marlin/src/inc/Conditionals_LCD.h

@@ -529,10 +529,6 @@
   #define HAS_MANUAL_MOVE_MENU 1
 #endif
 
-#if ANY(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, IS_DWIN_MARLINUI, DWIN_CREALITY_LCD_JYERSUI)
-  #define CAN_SHOW_REMAINING_TIME 1
-#endif
-
 #if HAS_MARLINUI_U8GLIB
   #ifndef LCD_PIXEL_WIDTH
     #define LCD_PIXEL_WIDTH 128

Marlin/src/inc/Conditionals_adv.h

@@ -599,10 +599,16 @@
   #undef MENU_ADDAUTOSTART
 #endif
 
-#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
+#if EITHER(SDSUPPORT, SET_PROGRESS_MANUALLY)
   #define HAS_PRINT_PROGRESS 1
 #endif
 
+#if DISABLED(SET_PROGRESS_MANUALLY)
+  #undef SET_REMAINING_TIME
+  #undef SET_INTERACTION_TIME
+  #undef M73_REPORT
+#endif
+
 #if ANY(HAS_MARLINUI_MENU, ULTIPANEL_FEEDMULTIPLY, SOFT_RESET_ON_KILL)
   #define HAS_ENCODER_ACTION 1
 #endif

Marlin/src/inc/SanityCheck.h

@@ -587,7 +587,7 @@
 #elif defined(MKS_LCD12864)
   #error "MKS_LCD12864 is now MKS_LCD12864A or MKS_LCD12864B."
 #elif defined(DOGM_SD_PERCENT)
-  #error "DOGM_SD_PERCENT is now SHOW_SD_PERCENT."
+  #error "DOGM_SD_PERCENT is now SHOW_PROGRESS_PERCENT."
 #elif defined(NEOPIXEL_BKGD_LED_INDEX)
   #error "NEOPIXEL_BKGD_LED_INDEX is now NEOPIXEL_BKGD_INDEX_FIRST."
 #elif defined(TEMP_SENSOR_1_AS_REDUNDANT)
@@ -646,6 +646,12 @@
   #error "TOUCH_IDLE_SLEEP (seconds) is now TOUCH_IDLE_SLEEP_MINS (minutes)."
 #elif defined(LCD_BACKLIGHT_TIMEOUT)
   #error "LCD_BACKLIGHT_TIMEOUT (seconds) is now LCD_BACKLIGHT_TIMEOUT_MINS (minutes)."
+#elif defined(LCD_SET_PROGRESS_MANUALLY)
+  #error "LCD_SET_PROGRESS_MANUALLY is now SET_PROGRESS_MANUALLY."
+#elif defined(USE_M73_REMAINING_TIME)
+  #error "USE_M73_REMAINING_TIME is now SET_REMAINING_TIME."
+#elif defined(SHOW_SD_PERCENT)
+  #error "SHOW_SD_PERCENT is now SHOW_PROGRESS_PERCENT."
 #endif
 
 // L64xx stepper drivers have been removed
@@ -894,8 +900,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
  * Progress Bar
  */
 #if ENABLED(LCD_PROGRESS_BAR)
-  #if NONE(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
-    #error "LCD_PROGRESS_BAR requires SDSUPPORT or LCD_SET_PROGRESS_MANUALLY."
+  #if NONE(SDSUPPORT, SET_PROGRESS_MANUALLY)
+    #error "LCD_PROGRESS_BAR requires SDSUPPORT or SET_PROGRESS_MANUALLY."
   #elif NONE(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
     #error "LCD_PROGRESS_BAR only applies to HD44780 character LCD and TFTGLCD_PANEL_(SPI|I2C)."
   #elif HAS_MARLINUI_U8GLIB || IS_DWIN_MARLINUI
@@ -905,12 +911,14 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   #elif PROGRESS_MSG_EXPIRE < 0
     #error "PROGRESS_MSG_EXPIRE must be greater than or equal to 0."
   #endif
-#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && NONE(HAS_MARLINUI_U8GLIB, HAS_GRAPHICAL_TFT, HAS_MARLINUI_HD44780, EXTENSIBLE_UI, HAS_DWIN_E3V2, IS_DWIN_MARLINUI)
-  #error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Character LCD, Graphical LCD, TFT, DWIN_CREALITY_LCD, DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI, DWIN_MARLINUI_*, OR EXTENSIBLE_UI."
 #endif
 
-#if ENABLED(USE_M73_REMAINING_TIME) && DISABLED(LCD_SET_PROGRESS_MANUALLY)
-  #error "USE_M73_REMAINING_TIME requires LCD_SET_PROGRESS_MANUALLY"
+#if ENABLED(SET_PROGRESS_MANUALLY) && NONE(SET_PROGRESS_PERCENT, SET_REMAINING_TIME, SET_INTERACTION_TIME)
+  #error "SET_PROGRESS_MANUALLY requires at least one of SET_PROGRESS_PERCENT, SET_REMAINING_TIME, SET_INTERACTION_TIME to be enabled."
+#endif
+
+#if HAS_LCDPRINT && LCD_HEIGHT < 4 && ANY(SHOW_PROGRESS_PERCENT, SHOW_ELAPSED_TIME, SHOW_REMAINING_TIME, SHOW_INTERACTION_TIME)
+  #error "Displays with fewer than 4 rows of text can't show progress values."
 #endif
 
 #if !HAS_MARLINUI_MENU && ENABLED(SD_REPRINT_LAST_SELECTED_FILE)
@@ -4038,10 +4046,6 @@ static_assert(_PLUS_TEST(4), "HOMING_FEEDRATE_MM_M values must be positive.");
   #error "COOLANT_FLOOD requires COOLANT_FLOOD_PIN to be defined."
 #endif
 
-#if NONE(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI, IS_DWIN_MARLINUI) && ENABLED(PRINT_PROGRESS_SHOW_DECIMALS)
-  #error "PRINT_PROGRESS_SHOW_DECIMALS currently requires a Graphical LCD."
-#endif
-
 #if HAS_ADC_BUTTONS && defined(ADC_BUTTON_DEBOUNCE_DELAY) && ADC_BUTTON_DEBOUNCE_DELAY < 16
   #error "ADC_BUTTON_DEBOUNCE_DELAY must be greater than 16."
 #endif