Adjust axis homed / trusted methods (#20323)

Marlin/src/gcode/calibrate/G28.cpp

@@ -319,15 +319,14 @@ void GcodeSuite::G28() {
 
     #endif
 
-    const float z_homing_height =
-      ENABLED(UNKNOWN_Z_NO_RAISE) && !TEST(axis_known_position, Z_AXIS)
-        ? 0
-        : (parser.seenval('R') ? parser.value_linear_units() : Z_HOMING_HEIGHT);
+    const float z_homing_height = TERN1(UNKNOWN_Z_NO_RAISE, axis_is_trusted(Z_AXIS))
+                                  ? (parser.seenval('R') ? parser.value_linear_units() : Z_HOMING_HEIGHT)
+                                  : 0;
 
     if (z_homing_height && (doX || doY || TERN0(Z_SAFE_HOMING, doZ))) {
       // Raise Z before homing any other axes and z is not already high enough (never lower z)
       if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Raise Z (before homing) by ", z_homing_height);
-      do_z_clearance(z_homing_height, true, DISABLED(UNKNOWN_Z_NO_RAISE));
+      do_z_clearance(z_homing_height, axis_is_trusted(Z_AXIS), DISABLED(UNKNOWN_Z_NO_RAISE));
     }
 
     #if ENABLED(QUICK_HOME)

Marlin/src/gcode/calibrate/G34.cpp

@@ -39,7 +39,7 @@
 void GcodeSuite::G34() {
 
   // Home before the alignment procedure
-  if (!all_axes_known()) home_all_axes();
+  if (!all_axes_trusted()) home_all_axes();
 
   SET_SOFT_ENDSTOP_LOOSE(true);
   TEMPORARY_BED_LEVELING_STATE(false);

Marlin/src/gcode/calibrate/G34_M422.cpp

@@ -167,7 +167,7 @@ void GcodeSuite::G34() {
       );
 
       // Home before the alignment procedure
-      if (!all_axes_known()) home_all_axes();
+      if (!all_axes_trusted()) home_all_axes();
 
       // Move the Z coordinate realm towards the positive - dirty trick
       current_position.z += z_probe * 0.5f;

Marlin/src/gcode/feature/pause/M600.cpp

@@ -102,7 +102,7 @@ void GcodeSuite::M600() {
 
   #if ENABLED(HOME_BEFORE_FILAMENT_CHANGE)
     // If needed, home before parking for filament change
-    if (!all_axes_known()) home_all_axes();
+    if (!all_axes_trusted()) home_all_axes();
   #endif
 
   #if HAS_MULTI_EXTRUDER

Marlin/src/gcode/feature/pause/M701_M702.cpp

@@ -59,10 +59,8 @@
 void GcodeSuite::M701() {
   xyz_pos_t park_point = NOZZLE_PARK_POINT;
 
-  #if ENABLED(NO_MOTION_BEFORE_HOMING)
-    // Don't raise Z if the machine isn't homed
-    if (axes_should_home()) park_point.z = 0;
-  #endif
+  // Don't raise Z if the machine isn't homed
+  if (TERN0(NO_MOTION_BEFORE_HOMING, axes_should_home())) park_point.z = 0;
 
   #if ENABLED(MIXING_EXTRUDER)
     const int8_t target_e_stepper = get_target_e_stepper_from_command();
@@ -147,10 +145,8 @@ void GcodeSuite::M701() {
 void GcodeSuite::M702() {
   xyz_pos_t park_point = NOZZLE_PARK_POINT;
 
-  #if ENABLED(NO_MOTION_BEFORE_HOMING)
-    // Don't raise Z if the machine isn't homed
-    if (axes_should_home()) park_point.z = 0;
-  #endif
+  // Don't raise Z if the machine isn't homed
+  if (TERN0(NO_MOTION_BEFORE_HOMING, axes_should_home())) park_point.z = 0;
 
   #if ENABLED(MIXING_EXTRUDER)
     const uint8_t old_mixing_tool = mixer.get_current_vtool();

Marlin/src/lcd/HD44780/marlinui_HD44780.cpp

@@ -506,18 +506,12 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const
   lcd_put_wchar('X' + uint8_t(axis));
   if (blink)
     lcd_put_u8str(value);
-  else {
-    if (!TEST(axis_homed, axis))
-      while (const char c = *value++) lcd_put_wchar(c <= '.' ? c : '?');
-    else {
-      #if NONE(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING)
-        if (!TEST(axis_known_position, axis))
-          lcd_put_u8str_P(axis == Z_AXIS ? PSTR("       ") : PSTR("    "));
-        else
-      #endif
-          lcd_put_u8str(value);
-    }
-  }
+  else if (axis_should_home(axis))
+    while (const char c = *value++) lcd_put_wchar(c <= '.' ? c : '?');
+  else if (NONE(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING) && !axis_is_trusted(axis))
+    lcd_put_u8str_P(axis == Z_AXIS ? PSTR("       ") : PSTR("    "));
+  else
+    lcd_put_u8str(value);
 }
 
 FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char prefix, const bool blink) {

Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp

@@ -422,18 +422,12 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const
   lcd.write('X' + uint8_t(axis));
   if (blink)
     lcd.print(value);
-  else {
-    if (!TEST(axis_homed, axis))
-      while (const char c = *value++) lcd.write(c <= '.' ? c : '?');
-    else {
-      #if NONE(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING)
-        if (!TEST(axis_known_position, axis))
-          lcd_put_u8str_P(axis == Z_AXIS ? PSTR("       ") : PSTR("    "));
-        else
-      #endif
-          lcd_put_u8str(value);
-    }
-  }
+  else if (axis_should_home(axis))
+    while (const char c = *value++) lcd.write(c <= '.' ? c : '?');
+  else if (NONE(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING) && !axis_is_trusted(axis))
+    lcd_put_u8str_P(axis == Z_AXIS ? PSTR("       ") : PSTR("    "));
+  else
+    lcd_put_u8str(value);
 }
 
 FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char *prefix, const bool blink) {

Marlin/src/lcd/dogm/status_screen_DOGM.cpp

@@ -384,18 +384,12 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const
 
   if (blink)
     lcd_put_u8str(value);
-  else {
-    if (!TEST(axis_homed, axis))
-      while (const char c = *value++) lcd_put_wchar(c <= '.' ? c : '?');
-    else {
-      #if NONE(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING)
-        if (!TEST(axis_known_position, axis))
-          lcd_put_u8str_P(axis == Z_AXIS ? PSTR("       ") : PSTR("    "));
-        else
-      #endif
-          lcd_put_u8str(value);
-    }
-  }
+  else if (axis_should_home(axis))
+    while (const char c = *value++) lcd_put_wchar(c <= '.' ? c : '?');
+  else if (NONE(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING) && !axis_is_trusted(axis))
+    lcd_put_u8str_P(axis == Z_AXIS ? PSTR("       ") : PSTR("    "));
+  else
+    lcd_put_u8str(value);
 }
 
 /**

Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp

@@ -659,13 +659,13 @@ void ST7920_Lite_Status_Screen::draw_status_message() {
   #endif
 }
 
-void ST7920_Lite_Status_Screen::draw_position(const xyze_pos_t &pos, const bool position_known) {
+void ST7920_Lite_Status_Screen::draw_position(const xyze_pos_t &pos, const bool position_trusted) {
   char str[7];
   set_ddram_address(DDRAM_LINE_4);
   begin_data();
 
   // If position is unknown, flash the labels.
-  const unsigned char alt_label = position_known ? 0 : (ui.get_blink() ? ' ' : 0);
+  const unsigned char alt_label = position_trusted ? 0 : (ui.get_blink() ? ' ' : 0);
 
   if (TERN1(LCD_SHOW_E_TOTAL, !printingIsActive())) {
     write_byte(alt_label ? alt_label : 'X');
@@ -831,9 +831,8 @@ void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) {
       }
     }
 
-    if (countdown == 0 && (forceUpdate || position_changed()
-      || TERN(DISABLE_REDUCED_ACCURACY_WARNING, 0, blink_changed())
-    )) draw_position(current_position, TERN(DISABLE_REDUCED_ACCURACY_WARNING, 1, all_axes_known()));
+    if (countdown == 0 && (forceUpdate || position_changed() || TERN(DISABLE_REDUCED_ACCURACY_WARNING, 0, blink_changed())))
+      draw_position(current_position, TERN(DISABLE_REDUCED_ACCURACY_WARNING, 1, all_axes_trusted()));
   #endif
 }
 
@@ -855,7 +854,7 @@ void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) {
 
     UNUSED(forceUpdate);
 
-  #endif // LCD_SET_PROGRESS_MANUALLY || SDSUPPORT
+  #endif
 }
 
 void ST7920_Lite_Status_Screen::update(const bool forceUpdate) {

Marlin/src/lcd/dwin/e3v2/dwin.cpp

@@ -1281,8 +1281,7 @@ void HMI_Move_Z() {
       last_zoffset = dwin_zoffset;
       dwin_zoffset = HMI_ValueStruct.offset_value / 100.0f;
       #if EITHER(BABYSTEP_ZPROBE_OFFSET, JUST_BABYSTEP)
-        if ( (ENABLED(BABYSTEP_WITHOUT_HOMING) || all_axes_known()) && (ENABLED(BABYSTEP_ALWAYS_AVAILABLE) || printer_busy()) )
-          babystep.add_mm(Z_AXIS, dwin_zoffset - last_zoffset);
+        if (BABYSTEP_ALLOWED()) babystep.add_mm(Z_AXIS, dwin_zoffset - last_zoffset);
       #endif
       DWIN_Draw_Signed_Float(font8x16, Select_Color, 2, 2, 202, MBASE(zoff_line), HMI_ValueStruct.offset_value);
       DWIN_UpdateLCD();

Marlin/src/lcd/extui/ui_api.cpp

@@ -356,9 +356,9 @@ namespace ExtUI {
   bool canMove(const axis_t axis) {
     switch (axis) {
       #if IS_KINEMATIC || ENABLED(NO_MOTION_BEFORE_HOMING)
-        case X: return TEST(axis_homed, X_AXIS);
-        case Y: return TEST(axis_homed, Y_AXIS);
-        case Z: return TEST(axis_homed, Z_AXIS);
+        case X: return axis_should_home(X_AXIS);
+        case Y: return axis_should_home(Y_AXIS);
+        case Z: return axis_should_home(Z_AXIS);
       #else
         case X: case Y: case Z: return true;
       #endif
@@ -889,9 +889,9 @@ namespace ExtUI {
 
   bool commandsInQueue() { return (planner.movesplanned() || queue.has_commands_queued()); }
 
-  bool isAxisPositionKnown(const axis_t axis) { return TEST(axis_known_position, axis); }
-  bool isAxisPositionKnown(const extruder_t) { return TEST(axis_known_position, E_AXIS); }
-  bool isPositionKnown() { return all_axes_known(); }
+  bool isAxisPositionKnown(const axis_t axis) { return axis_is_trusted((AxisEnum)axis); }
+  bool isAxisPositionKnown(const extruder_t) { return axis_is_trusted(E_AXIS); }
+  bool isPositionKnown() { return all_axes_trusted(); }
   bool isMachineHomed() { return all_axes_homed(); }
 
   PGM_P getFirmwareName_str() {

Marlin/src/lcd/menu/menu.cpp

@@ -188,8 +188,7 @@ void MarlinUI::goto_screen(screenFunc_t screen, const uint16_t encoder/*=0*/, co
           doubleclick_expire_ms = millis() + DOUBLECLICK_MAX_INTERVAL;
       }
       else if (screen == status_screen && currentScreen == menu_main && PENDING(millis(), doubleclick_expire_ms)) {
-        if ( (ENABLED(BABYSTEP_WITHOUT_HOMING) || all_axes_known())
-          && (ENABLED(BABYSTEP_ALWAYS_AVAILABLE) || printer_busy()) )
+        if (BABYSTEP_ALLOWED())
           screen = TERN(BABYSTEP_ZPROBE_OFFSET, lcd_babystep_zoffset, lcd_babystep_z);
         else {
           #if ENABLED(MOVE_Z_WHEN_IDLE)

Marlin/src/lcd/menu/menu_bed_corners.cpp

@@ -230,7 +230,7 @@ static inline void _lcd_level_bed_corners_homing() {
 
 void _lcd_level_bed_corners() {
   ui.defer_status_screen();
-  if (!all_axes_known()) {
+  if (!all_axes_trusted()) {
     set_all_unhomed();
     queue.inject_P(G28_STR);
   }

Marlin/src/lcd/menu/menu_bed_leveling.cpp

@@ -237,7 +237,7 @@
  *    Save Settings       (Req: EEPROM_SETTINGS)
  */
 void menu_bed_leveling() {
-  const bool is_homed = all_axes_known(),
+  const bool is_homed = all_axes_trusted(),
              is_valid = leveling_is_valid();
 
   START_MENU();

Marlin/src/lcd/menu/menu_configuration.cpp

@@ -164,7 +164,7 @@ void menu_advanced_settings();
   void menu_tool_offsets() {
 
     auto _recalc_offsets = []{
-      if (active_extruder && all_axes_known()) {  // For the 2nd extruder re-home so the next tool-change gets the new offsets.
+      if (active_extruder && all_axes_trusted()) {  // For the 2nd extruder re-home so the next tool-change gets the new offsets.
         queue.inject_P(G28_STR); // In future, we can babystep the 2nd extruder (if active), making homing unnecessary.
         active_extruder = 0;
       }

Marlin/src/lcd/menu/menu_ubl.cpp

@@ -524,7 +524,7 @@ void _ubl_map_screen_homing() {
  */
 void _ubl_goto_map_screen() {
   if (planner.movesplanned()) return;     // The ACTION_ITEM will do nothing
-  if (!all_axes_known()) {
+  if (!all_axes_trusted()) {
     set_all_unhomed();
     queue.inject_P(G28_STR);
   }

Marlin/src/lcd/tft/ui_320x240.cpp

@@ -257,42 +257,37 @@ void MarlinUI::draw_status_screen() {
   tft.set_background(COLOR_BACKGROUND);
   tft.add_rectangle(0, 0, 312, 24, COLOR_AXIS_HOMED);
 
-  uint16_t color;
-  uint16_t offset;
-  bool is_homed;
-
   tft.add_text( 10, 3, COLOR_AXIS_HOMED , "X");
   tft.add_text(127, 3, COLOR_AXIS_HOMED , "Y");
   tft.add_text(219, 3, COLOR_AXIS_HOMED , "Z");
 
-  is_homed = TEST(axis_homed, X_AXIS);
-  tft_string.set(blink & !is_homed ? "?" : ftostr4sign(LOGICAL_X_POSITION(current_position.x)));
-  tft.add_text( 68 - tft_string.width(), 3, is_homed ? COLOR_AXIS_HOMED : COLOR_AXIS_NOT_HOMED, tft_string);
+  bool not_homed = axis_should_home(X_AXIS);
+  tft_string.set(blink && not_homed ? "?" : ftostr4sign(LOGICAL_X_POSITION(current_position.x)));
+  tft.add_text( 68 - tft_string.width(), 3, not_homed ? COLOR_AXIS_NOT_HOMED : COLOR_AXIS_HOMED, tft_string);
 
-  is_homed = TEST(axis_homed, Y_AXIS);
-  tft_string.set(blink & !is_homed ? "?" : ftostr4sign(LOGICAL_Y_POSITION(current_position.y)));
-  tft.add_text(185 - tft_string.width(), 3, is_homed ? COLOR_AXIS_HOMED : COLOR_AXIS_NOT_HOMED, tft_string);
+  not_homed = axis_should_home(Y_AXIS);
+  tft_string.set(blink && not_homed ? "?" : ftostr4sign(LOGICAL_Y_POSITION(current_position.y)));
+  tft.add_text(185 - tft_string.width(), 3, not_homed ? COLOR_AXIS_NOT_HOMED : COLOR_AXIS_HOMED, tft_string);
 
-  is_homed = TEST(axis_homed, Z_AXIS);
-  if (blink & !is_homed) {
+  not_homed = axis_should_home(Z_AXIS);
+  uint16_t offset = 25;
+  if (blink && not_homed)
     tft_string.set("?");
-    offset = 25; // ".00"
-  }
   else {
     const float z = LOGICAL_Z_POSITION(current_position.z);
     tft_string.set(ftostr52sp((int16_t)z));
     tft_string.rtrim();
-    offset = tft_string.width();
+    offset += tft_string.width();
 
     tft_string.set(ftostr52sp(z));
-    offset += 25 - tft_string.width();
+    offset -= tft_string.width();
   }
-  tft.add_text(301 - tft_string.width() - offset, 3, is_homed ? COLOR_AXIS_HOMED : COLOR_AXIS_NOT_HOMED, tft_string);
+  tft.add_text(301 - tft_string.width() - offset, 3, not_homed ? COLOR_AXIS_NOT_HOMED : COLOR_AXIS_HOMED, tft_string);
 
   // feed rate
   tft.canvas(70, 136, 80, 32);
   tft.set_background(COLOR_BACKGROUND);
-  color = feedrate_percentage == 100 ? COLOR_RATE_100 : COLOR_RATE_ALTERED;
+  uint16_t color = feedrate_percentage == 100 ? COLOR_RATE_100 : COLOR_RATE_ALTERED;
   tft.add_image(0, 0, imgFeedRate, color);
   tft_string.set(i16tostr3rj(feedrate_percentage));
   tft_string.add('%');

Marlin/src/lcd/tft/ui_480x320.cpp

@@ -262,43 +262,38 @@ void MarlinUI::draw_status_screen() {
   tft.set_background(COLOR_BACKGROUND);
   tft.add_rectangle(0, 0, TFT_WIDTH - 8, 34, COLOR_AXIS_HOMED);
 
-  uint16_t color;
-  uint16_t offset;
-  bool is_homed;
-
   tft.add_text( 16, 3, COLOR_AXIS_HOMED , "X");
   tft.add_text(192, 3, COLOR_AXIS_HOMED , "Y");
   tft.add_text(330, 3, COLOR_AXIS_HOMED , "Z");
 
-  is_homed = TEST(axis_homed, X_AXIS);
-  tft_string.set(blink & !is_homed ? "?" : ftostr4sign(LOGICAL_X_POSITION(current_position.x)));
-  tft.add_text(102 - tft_string.width(), 3, is_homed ? COLOR_AXIS_HOMED : COLOR_AXIS_NOT_HOMED, tft_string);
+  bool not_homed = axis_should_home(X_AXIS);
+  tft_string.set(blink && not_homed ? "?" : ftostr4sign(LOGICAL_X_POSITION(current_position.x)));
+  tft.add_text(102 - tft_string.width(), 3, not_homed ? COLOR_AXIS_NOT_HOMED : COLOR_AXIS_HOMED, tft_string);
 
-  is_homed = TEST(axis_homed, Y_AXIS);
-  tft_string.set(blink & !is_homed ? "?" : ftostr4sign(LOGICAL_Y_POSITION(current_position.y)));
-  tft.add_text(280 - tft_string.width(), 3, is_homed ? COLOR_AXIS_HOMED : COLOR_AXIS_NOT_HOMED, tft_string);
+  not_homed = axis_should_home(Y_AXIS);
+  tft_string.set(blink && not_homed ? "?" : ftostr4sign(LOGICAL_Y_POSITION(current_position.y)));
+  tft.add_text(280 - tft_string.width(), 3, not_homed ? COLOR_AXIS_NOT_HOMED : COLOR_AXIS_HOMED, tft_string);
 
-  is_homed = TEST(axis_homed, Z_AXIS);
-  if (blink & !is_homed) {
+  uint16_t offset = 32;
+  not_homed = axis_should_home(Z_AXIS);
+  if (blink && not_homed)
     tft_string.set("?");
-    offset = 32; // ".00"
-  }
   else {
     const float z = LOGICAL_Z_POSITION(current_position.z);
     tft_string.set(ftostr52sp((int16_t)z));
     tft_string.rtrim();
-    offset = tft_string.width();
+    offset += tft_string.width();
 
     tft_string.set(ftostr52sp(z));
-    offset += 32 - tft_string.width();
+    offset -= tft_string.width();
   }
-  tft.add_text(455 - tft_string.width() - offset, 3, is_homed ? COLOR_AXIS_HOMED : COLOR_AXIS_NOT_HOMED, tft_string);
+  tft.add_text(455 - tft_string.width() - offset, 3, not_homed ? COLOR_AXIS_NOT_HOMED : COLOR_AXIS_HOMED, tft_string);
   TERN_(TOUCH_SCREEN, touch.add_control(MOVE_AXIS, 4, 132, TFT_WIDTH - 8, 34));
 
   // feed rate
   tft.canvas(96, 180, 100, 32);
   tft.set_background(COLOR_BACKGROUND);
-  color = feedrate_percentage == 100 ? COLOR_RATE_100 : COLOR_RATE_ALTERED;
+  uint16_t color = feedrate_percentage == 100 ? COLOR_RATE_100 : COLOR_RATE_ALTERED;
   tft.add_image(0, 0, imgFeedRate, color);
   tft_string.set(i16tostr3rj(feedrate_percentage));
   tft_string.add('%');