heater inverting as switch

Marlin/src/inc/Conditionals_post.h

@@ -2799,54 +2799,24 @@
   #define HAS_MICROSTEPS 1
 #endif
 
-/**
- * Heater signal inversion defaults
- */
-
-#if HAS_HEATER_0 && !defined(HEATER_0_INVERTING)
-  #define HEATER_0_INVERTING false
-#endif
-#if HAS_HEATER_1 && !defined(HEATER_1_INVERTING)
-  #define HEATER_1_INVERTING false
-#endif
-#if HAS_HEATER_2 && !defined(HEATER_2_INVERTING)
-  #define HEATER_2_INVERTING false
-#endif
-#if HAS_HEATER_3 && !defined(HEATER_3_INVERTING)
-  #define HEATER_3_INVERTING false
-#endif
-#if HAS_HEATER_4 && !defined(HEATER_4_INVERTING)
-  #define HEATER_4_INVERTING false
-#endif
-#if HAS_HEATER_5 && !defined(HEATER_5_INVERTING)
-  #define HEATER_5_INVERTING false
-#endif
-#if HAS_HEATER_6 && !defined(HEATER_6_INVERTING)
-  #define HEATER_6_INVERTING false
-#endif
-#if HAS_HEATER_7 && !defined(HEATER_7_INVERTING)
-  #define HEATER_7_INVERTING false
-#endif
-
 /**
  * Helper Macros for heaters and extruder fan
  */
-
-#define WRITE_HEATER_0P(v) WRITE(HEATER_0_PIN, (v) ^ HEATER_0_INVERTING)
+#define WRITE_HEATER_0P(v) WRITE(HEATER_0_PIN, (v) ^ ENABLED(HEATER_0_INVERTING))
 #if EITHER(HAS_MULTI_HOTEND, HEATERS_PARALLEL)
-  #define WRITE_HEATER_1(v) WRITE(HEATER_1_PIN, (v) ^ HEATER_1_INVERTING)
+  #define WRITE_HEATER_1(v) WRITE(HEATER_1_PIN, (v) ^ ENABLED(HEATER_1_INVERTING))
   #if HOTENDS > 2
-    #define WRITE_HEATER_2(v) WRITE(HEATER_2_PIN, (v) ^ HEATER_2_INVERTING)
+    #define WRITE_HEATER_2(v) WRITE(HEATER_2_PIN, (v) ^ ENABLED(HEATER_2_INVERTING))
     #if HOTENDS > 3
-      #define WRITE_HEATER_3(v) WRITE(HEATER_3_PIN, (v) ^ HEATER_3_INVERTING)
+      #define WRITE_HEATER_3(v) WRITE(HEATER_3_PIN, (v) ^ ENABLED(HEATER_3_INVERTING))
       #if HOTENDS > 4
-        #define WRITE_HEATER_4(v) WRITE(HEATER_4_PIN, (v) ^ HEATER_4_INVERTING)
+        #define WRITE_HEATER_4(v) WRITE(HEATER_4_PIN, (v) ^ ENABLED(HEATER_4_INVERTING))
         #if HOTENDS > 5
-          #define WRITE_HEATER_5(v) WRITE(HEATER_5_PIN, (v) ^ HEATER_5_INVERTING)
+          #define WRITE_HEATER_5(v) WRITE(HEATER_5_PIN, (v) ^ ENABLED(HEATER_5_INVERTING))
           #if HOTENDS > 6
-            #define WRITE_HEATER_6(v) WRITE(HEATER_6_PIN, (v) ^ HEATER_6_INVERTING)
+            #define WRITE_HEATER_6(v) WRITE(HEATER_6_PIN, (v) ^ ENABLED(HEATER_6_INVERTING))
             #if HOTENDS > 7
-              #define WRITE_HEATER_7(v) WRITE(HEATER_7_PIN, (v) ^ HEATER_7_INVERTING)
+              #define WRITE_HEATER_7(v) WRITE(HEATER_7_PIN, (v) ^ ENABLED(HEATER_7_INVERTING))
             #endif // HOTENDS > 7
           #endif // HOTENDS > 6
         #endif // HOTENDS > 5
@@ -2860,10 +2830,6 @@
   #define WRITE_HEATER_0(v) WRITE_HEATER_0P(v)
 #endif
 
-#ifndef MIN_POWER
-  #define MIN_POWER 0
-#endif
-
 /**
  * Heated bed requires settings
  */
@@ -2874,10 +2840,7 @@
   #ifndef MAX_BED_POWER
     #define MAX_BED_POWER 255
   #endif
-  #ifndef HEATER_BED_INVERTING
-    #define HEATER_BED_INVERTING false
-  #endif
-  #define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN, (v) ^ HEATER_BED_INVERTING)
+  #define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN, (v) ^ ENABLED(HEATER_BED_INVERTING))
 #endif
 
 /**
@@ -2890,10 +2853,7 @@
   #ifndef MAX_CHAMBER_POWER
     #define MAX_CHAMBER_POWER 255
   #endif
-  #ifndef HEATER_CHAMBER_INVERTING
-    #define HEATER_CHAMBER_INVERTING false
-  #endif
-  #define WRITE_HEATER_CHAMBER(v) WRITE(HEATER_CHAMBER_PIN, (v) ^ HEATER_CHAMBER_INVERTING)
+  #define WRITE_HEATER_CHAMBER(v) WRITE(HEATER_CHAMBER_PIN, (v) ^ ENABLED(HEATER_CHAMBER_INVERTING))
 #endif
 
 /**
@@ -2903,10 +2863,7 @@
   #ifndef MAX_COOLER_POWER
     #define MAX_COOLER_POWER 255
   #endif
-  #ifndef COOLER_INVERTING
-    #define COOLER_INVERTING true
-  #endif
-  #define WRITE_HEATER_COOLER(v) WRITE(COOLER_PIN, (v) ^ COOLER_INVERTING)
+  #define WRITE_HEATER_COOLER(v) WRITE(COOLER_PIN, (v) ^ ENABLED(COOLER_INVERTING))
 #endif
 
 #if HAS_HOTEND || HAS_HEATED_BED || HAS_HEATED_CHAMBER || HAS_COOLER

Marlin/src/module/temperature.cpp

@@ -2630,47 +2630,47 @@ void Temperature::init() {
 
   #if HAS_HEATER_0
     #ifdef BOARD_OPENDRAIN_MOSFETS
-      OUT_WRITE_OD(HEATER_0_PIN, HEATER_0_INVERTING);
+      OUT_WRITE_OD(HEATER_0_PIN, ENABLED(HEATER_0_INVERTING));
     #else
-      OUT_WRITE(HEATER_0_PIN, HEATER_0_INVERTING);
+      OUT_WRITE(HEATER_0_PIN, ENABLED(HEATER_0_INVERTING));
     #endif
   #endif
   #if HAS_HEATER_1
-    OUT_WRITE(HEATER_1_PIN, HEATER_1_INVERTING);
+    OUT_WRITE(HEATER_1_PIN, ENABLED(HEATER_1_INVERTING));
   #endif
   #if HAS_HEATER_2
-    OUT_WRITE(HEATER_2_PIN, HEATER_2_INVERTING);
+    OUT_WRITE(HEATER_2_PIN, ENABLED(HEATER_2_INVERTING));
   #endif
   #if HAS_HEATER_3
-    OUT_WRITE(HEATER_3_PIN, HEATER_3_INVERTING);
+    OUT_WRITE(HEATER_3_PIN, ENABLED(HEATER_3_INVERTING));
   #endif
   #if HAS_HEATER_4
-    OUT_WRITE(HEATER_4_PIN, HEATER_4_INVERTING);
+    OUT_WRITE(HEATER_4_PIN, ENABLED(HEATER_4_INVERTING));
   #endif
   #if HAS_HEATER_5
-    OUT_WRITE(HEATER_5_PIN, HEATER_5_INVERTING);
+    OUT_WRITE(HEATER_5_PIN, ENABLED(HEATER_5_INVERTING));
   #endif
   #if HAS_HEATER_6
-    OUT_WRITE(HEATER_6_PIN, HEATER_6_INVERTING);
+    OUT_WRITE(HEATER_6_PIN, ENABLED(HEATER_6_INVERTING));
   #endif
   #if HAS_HEATER_7
-    OUT_WRITE(HEATER_7_PIN, HEATER_7_INVERTING);
+    OUT_WRITE(HEATER_7_PIN, ENABLED(HEATER_7_INVERTING));
   #endif
 
   #if HAS_HEATED_BED
     #ifdef BOARD_OPENDRAIN_MOSFETS
-      OUT_WRITE_OD(HEATER_BED_PIN, HEATER_BED_INVERTING);
+      OUT_WRITE_OD(HEATER_BED_PIN, ENABLED(HEATER_BED_INVERTING));
     #else
-      OUT_WRITE(HEATER_BED_PIN, HEATER_BED_INVERTING);
+      OUT_WRITE(HEATER_BED_PIN, ENABLED(HEATER_BED_INVERTING));
     #endif
   #endif
 
   #if HAS_HEATED_CHAMBER
-    OUT_WRITE(HEATER_CHAMBER_PIN, HEATER_CHAMBER_INVERTING);
+    OUT_WRITE(HEATER_CHAMBER_PIN, ENABLED(HEATER_CHAMBER_INVERTING));
   #endif
 
   #if HAS_COOLER
-    OUT_WRITE(COOLER_PIN, COOLER_INVERTING);
+    OUT_WRITE(COOLER_PIN, ENABLED(COOLER_INVERTING));
   #endif
 
   #if HAS_FAN0