🐛 Prevent stepper sleep during long UBL idle (#22137)

MarlinFirmware · Jun 15, 2021 · 781257b · 781257b
1 parent dec083d
commit 781257b
Show file tree

Hide file tree

Showing 3 changed files with 10 additions and 11 deletions.
diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp
@@ -421,19 +421,18 @@ void startOrResumeJob() {
  *  - Check if an idle but hot extruder needs filament extruded (EXTRUDER_RUNOUT_PREVENT)
  *  - Pulse FET_SAFETY_PIN if it exists
  */
-inline void manage_inactivity(const bool ignore_stepper_queue=false) {
+inline void manage_inactivity(const bool no_stepper_sleep=false) {
 
   queue.get_available_commands();
 
   const millis_t ms = millis();
 
-  // Prevent steppers timing-out in the middle of M600
-  // unless PAUSE_PARK_NO_STEPPER_TIMEOUT is disabled
-  const bool parked_or_ignoring = ignore_stepper_queue
+  // Prevent steppers timing-out
+  const bool do_reset_timeout = no_stepper_sleep
                                || TERN0(PAUSE_PARK_NO_STEPPER_TIMEOUT, did_pause_print);
 
   // Reset both the M18/M84 activity timeout and the M85 max 'kill' timeout
-  if (parked_or_ignoring) gcode.reset_stepper_timeout(ms);
+  if (do_reset_timeout) gcode.reset_stepper_timeout(ms);
 
   if (gcode.stepper_max_timed_out(ms)) {
     SERIAL_ERROR_MSG(STR_KILL_INACTIVE_TIME, parser.command_ptr);
@@ -449,7 +448,7 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) {
     // activity timeout and the M85 max 'kill' timeout
     if (planner.has_blocks_queued())
       gcode.reset_stepper_timeout(ms);
-    else if (!parked_or_ignoring && gcode.stepper_inactive_timeout()) {
+    else if (!do_reset_timeout && gcode.stepper_inactive_timeout()) {
       if (!already_shutdown_steppers) {
         already_shutdown_steppers = true;  // L6470 SPI will consume 99% of free time without this
 
@@ -732,14 +731,14 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) {
  *  - Update the Průša MMU2
  *  - Handle Joystick jogging
  */
-void idle(TERN_(ADVANCED_PAUSE_FEATURE, bool no_stepper_sleep/*=false*/)) {
+void idle(bool no_stepper_sleep/*=false*/) {
   #if ENABLED(MARLIN_DEV_MODE)
     static uint16_t idle_depth = 0;
     if (++idle_depth > 5) SERIAL_ECHOLNPAIR("idle() call depth: ", idle_depth);
   #endif
 
   // Core Marlin activities
-  manage_inactivity(TERN_(ADVANCED_PAUSE_FEATURE, no_stepper_sleep));
+  manage_inactivity(no_stepper_sleep);
 
   // Manage Heaters (and Watchdog)
   thermalManager.manage_heater();

diff --git a/Marlin/src/MarlinCore.h b/Marlin/src/MarlinCore.h
@@ -34,8 +34,8 @@
 void stop();
 
 // Pass true to keep steppers from timing out
-void idle(TERN_(ADVANCED_PAUSE_FEATURE, bool no_stepper_sleep=false));
-inline void idle_no_sleep() { idle(TERN_(ADVANCED_PAUSE_FEATURE, true)); }
+void idle(bool no_stepper_sleep=false);
+inline void idle_no_sleep() { idle(true); }
 
 #if ENABLED(G38_PROBE_TARGET)
   extern uint8_t G38_move;          // Flag to tell the ISR that G38 is in progress, and the type

diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
@@ -1025,7 +1025,7 @@ void set_message_with_feedback(PGM_P const msg_P) {
       SET_SOFT_ENDSTOP_LOOSE(true);
 
       do {
-        idle();
+        idle_no_sleep();
         new_z = ui.ubl_mesh_value();
         TERN_(UBL_MESH_EDIT_MOVES_Z, do_blocking_move_to_z(h_offset + new_z)); // Move the nozzle as the point is edited
         SERIAL_FLUSH();                                   // Prevent host M105 buffer overrun.