✨ BTT Octopus Pro V1.0.1 (STM32H723ZE)

Marlin/src/core/boards.h

@@ -473,7 +473,8 @@
 #define BOARD_BTT_SKR_V3_0            6006  // BigTreeTech SKR V3.0 (STM32H743VI / STM32H723VG)
 #define BOARD_BTT_SKR_V3_0_EZ         6007  // BigTreeTech SKR V3.0 EZ (STM32H743VI / STM32H723VG)
 #define BOARD_BTT_OCTOPUS_MAX_EZ_V1_0 6008  // BigTreeTech Octopus Max EZ V1.0 (STM32H723ZE)
-#define BOARD_BTT_OCTOPUS_PRO_V1_1    6009  // BigTreeTech Octopus Pro v1.1 (STM32H723ZE)
+#define BOARD_BTT_OCTOPUS_PRO_V1_0_1  6009  // BigTreeTech Octopus Pro v1.0.1 (STM32H723ZE)
+#define BOARD_BTT_OCTOPUS_PRO_V1_1    6010  // BigTreeTech Octopus Pro v1.1 (STM32H723ZE)
 
 //
 // Espressif ESP32 WiFi

Marlin/src/pins/pins.h

@@ -823,6 +823,8 @@
   #include "stm32h7/pins_BTT_SKR_V3_0_EZ.h"         // STM32H7                              env:STM32H743VI_btt env:STM32H723VG_btt
 #elif MB(BTT_OCTOPUS_MAX_EZ_V1_0)
   #include "stm32h7/pins_BTT_OCTOPUS_MAX_EZ.h"      // STM32H7                              env:STM32H723ZE_btt
+#elif MB(BTT_OCTOPUS_PRO_V1_0_1)
+  #include "stm32h7/pins_BTT_OCTOPUS_PRO_V1_0_1.h"  // STM32H7                              env:STM32H723ZE_btt
 #elif MB(BTT_OCTOPUS_PRO_V1_1)
   #include "stm32h7/pins_BTT_OCTOPUS_PRO_V1_1.h"    // STM32H7                              env:STM32H723ZE_btt
 #elif MB(TEENSY41)

Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_PRO_V1_0_1.h

@@ -0,0 +1,44 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define BOARD_INFO_NAME "OCTOPUS PRO V1.0.1"
+
+//
+// Steppers
+//
+#define Z2_ENABLE_PIN                       PA0
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                        PA2   // Heater0
+#define HEATER_2_PIN                        PB10  // Heater2
+
+//
+// NeoPixel LED
+//
+#ifndef NEOPIXEL_PIN
+  #define NEOPIXEL_PIN                      PB0
+#endif
+
+#include "pins_BTT_OCTOPUS_PRO_V1_common.h"