Combine more tool change variables

Marlin/Configuration.h

@@ -154,17 +154,6 @@
 
 // For Cyclops or any "multi-extruder" that shares a single nozzle.
 //#define SINGLENOZZLE
-#if ENABLED(SINGLENOZZLE)
-  // Parameters for filament retract / prime on toolchange
-  #define SINGLENOZZLE_SWAP_LENGTH          12  // (mm)
-  #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600  // (mm/m)
-  #define SINGLENOZZLE_SWAP_PRIME_SPEED   3600  // (mm/m)
-  //#define SINGLENOZZLE_SWAP_PARK
-  #if ENABLED(SINGLENOZZLE_SWAP_PARK)
-    #define SINGLENOZZLE_TOOLCHANGE_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
-  #endif
-#endif
 
 /**
  * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@@ -945,9 +934,6 @@
 #define Y_MAX_POS Y_BED_SIZE
 #define Z_MAX_POS 200
 
-// Z raise distance for tool-change, as needed for some extruders
-#define TOOLCHANGE_ZRAISE     2  // (mm)
-
 /**
  * Software Endstops
  *

Marlin/Configuration_adv.h

@@ -1095,6 +1095,33 @@
   #endif
 #endif
 
+/**
+ * Universal tool change settings.
+ * Applies to all types of extruders except where explicitly noted.
+ */
+#if EXTRUDERS > 1
+  // Z raise distance for tool-change, as needed for some extruders
+  #define TOOLCHANGE_ZRAISE     2  // (mm)
+
+  // Retract and prime filament on tool-change
+  //#define TOOLCHANGE_FILAMENT_SWAP
+  #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
+    #define TOOLCHANGE_FIL_SWAP_LENGTH          12  // (mm)
+    #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600  // (mm/m)
+    #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED   3600  // (mm/m)
+  #endif
+
+  /**
+   * Position to park head during tool change.
+   * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
+   */
+  //#define TOOLCHANGE_PARK
+  #if ENABLED(TOOLCHANGE_PARK)
+    #define TOOLCHANGE_PARK_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
+    #define TOOLCHANGE_PARK_XY_FEEDRATE 6000  // (mm/m)
+  #endif
+#endif
+
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/default/Configuration.h

@@ -154,17 +154,6 @@
 
 // For Cyclops or any "multi-extruder" that shares a single nozzle.
 //#define SINGLENOZZLE
-#if ENABLED(SINGLENOZZLE)
-  // Parameters for filament retract / prime on toolchange
-  #define SINGLENOZZLE_SWAP_LENGTH          12  // (mm)
-  #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600  // (mm/m)
-  #define SINGLENOZZLE_SWAP_PRIME_SPEED   3600  // (mm/m)
-  //#define SINGLENOZZLE_SWAP_PARK
-  #if ENABLED(SINGLENOZZLE_SWAP_PARK)
-    #define SINGLENOZZLE_TOOLCHANGE_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
-  #endif
-#endif
 
 /**
  * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@@ -945,9 +934,6 @@
 #define Y_MAX_POS Y_BED_SIZE
 #define Z_MAX_POS 200
 
-// Z raise distance for tool-change, as needed for some extruders
-#define TOOLCHANGE_ZRAISE     2  // (mm)
-
 /**
  * Software Endstops
  *

Marlin/src/config/default/Configuration_adv.h

@@ -1095,6 +1095,33 @@
   #endif
 #endif
 
+/**
+ * Universal tool change settings.
+ * Applies to all types of extruders except where explicitly noted.
+ */
+#if EXTRUDERS > 1
+  // Z raise distance for tool-change, as needed for some extruders
+  #define TOOLCHANGE_ZRAISE     2  // (mm)
+
+  // Retract and prime filament on tool-change
+  //#define TOOLCHANGE_FILAMENT_SWAP
+  #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
+    #define TOOLCHANGE_FIL_SWAP_LENGTH          12  // (mm)
+    #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600  // (mm/m)
+    #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED   3600  // (mm/m)
+  #endif
+
+  /**
+   * Position to park head during tool change.
+   * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
+   */
+  //#define TOOLCHANGE_PARK
+  #if ENABLED(TOOLCHANGE_PARK)
+    #define TOOLCHANGE_PARK_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
+    #define TOOLCHANGE_PARK_XY_FEEDRATE 6000  // (mm/m)
+  #endif
+#endif
+
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

@@ -154,17 +154,6 @@
 
 // For Cyclops or any "multi-extruder" that shares a single nozzle.
 //#define SINGLENOZZLE
-#if ENABLED(SINGLENOZZLE)
-  // Parameters for filament retract / prime on toolchange
-  #define SINGLENOZZLE_SWAP_LENGTH          12  // (mm)
-  #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600  // (mm/m)
-  #define SINGLENOZZLE_SWAP_PRIME_SPEED   3600  // (mm/m)
-  //#define SINGLENOZZLE_SWAP_PARK
-  #if ENABLED(SINGLENOZZLE_SWAP_PARK)
-    #define SINGLENOZZLE_TOOLCHANGE_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
-  #endif
-#endif
 
 /**
  * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@@ -965,9 +954,6 @@
 #define Y_MAX_POS Y_BED_SIZE
 #define Z_MAX_POS 250
 
-// Z raise distance for tool-change, as needed for some extruders
-#define TOOLCHANGE_ZRAISE     2  // (mm)
-
 /**
  * Software Endstops
  *

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -1094,6 +1094,33 @@
   #endif
 #endif
 
+/**
+ * Universal tool change settings.
+ * Applies to all types of extruders except where explicitly noted.
+ */
+#if EXTRUDERS > 1
+  // Z raise distance for tool-change, as needed for some extruders
+  #define TOOLCHANGE_ZRAISE     2  // (mm)
+
+  // Retract and prime filament on tool-change
+  //#define TOOLCHANGE_FILAMENT_SWAP
+  #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
+    #define TOOLCHANGE_FIL_SWAP_LENGTH          12  // (mm)
+    #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600  // (mm/m)
+    #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED   3600  // (mm/m)
+  #endif
+
+  /**
+   * Position to park head during tool change.
+   * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
+   */
+  //#define TOOLCHANGE_PARK
+  #if ENABLED(TOOLCHANGE_PARK)
+    #define TOOLCHANGE_PARK_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
+    #define TOOLCHANGE_PARK_XY_FEEDRATE 6000  // (mm/m)
+  #endif
+#endif
+
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

@@ -154,17 +154,6 @@
 
 // For Cyclops or any "multi-extruder" that shares a single nozzle.
 //#define SINGLENOZZLE
-#if ENABLED(SINGLENOZZLE)
-  // Parameters for filament retract / prime on toolchange
-  #define SINGLENOZZLE_SWAP_LENGTH          12  // (mm)
-  #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600  // (mm/m)
-  #define SINGLENOZZLE_SWAP_PRIME_SPEED   3600  // (mm/m)
-  //#define SINGLENOZZLE_SWAP_PARK
-  #if ENABLED(SINGLENOZZLE_SWAP_PARK)
-    #define SINGLENOZZLE_TOOLCHANGE_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
-  #endif
-#endif
 
 /**
  * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@@ -945,9 +934,6 @@
 #define Y_MAX_POS Y_BED_SIZE
 #define Z_MAX_POS 260
 
-// Z raise distance for tool-change, as needed for some extruders
-#define TOOLCHANGE_ZRAISE     2  // (mm)
-
 /**
  * Software Endstops
  *

Marlin/src/config/examples/Anet/A2/Configuration.h

@@ -154,17 +154,6 @@
 
 // For Cyclops or any "multi-extruder" that shares a single nozzle.
 //#define SINGLENOZZLE
-#if ENABLED(SINGLENOZZLE)
-  // Parameters for filament retract / prime on toolchange
-  #define SINGLENOZZLE_SWAP_LENGTH          12  // (mm)
-  #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600  // (mm/m)
-  #define SINGLENOZZLE_SWAP_PRIME_SPEED   3600  // (mm/m)
-  //#define SINGLENOZZLE_SWAP_PARK
-  #if ENABLED(SINGLENOZZLE_SWAP_PARK)
-    #define SINGLENOZZLE_TOOLCHANGE_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
-  #endif
-#endif
 
 /**
  * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@@ -945,9 +934,6 @@
 #define Y_MAX_POS Y_BED_SIZE
 #define Z_MAX_POS 200
 
-// Z raise distance for tool-change, as needed for some extruders
-#define TOOLCHANGE_ZRAISE     2  // (mm)
-
 /**
  * Software Endstops
  *

Marlin/src/config/examples/Anet/A2/Configuration_adv.h

@@ -1094,6 +1094,33 @@
   #endif
 #endif
 
+/**
+ * Universal tool change settings.
+ * Applies to all types of extruders except where explicitly noted.
+ */
+#if EXTRUDERS > 1
+  // Z raise distance for tool-change, as needed for some extruders
+  #define TOOLCHANGE_ZRAISE     2  // (mm)
+
+  // Retract and prime filament on tool-change
+  //#define TOOLCHANGE_FILAMENT_SWAP
+  #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
+    #define TOOLCHANGE_FIL_SWAP_LENGTH          12  // (mm)
+    #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600  // (mm/m)
+    #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED   3600  // (mm/m)
+  #endif
+
+  /**
+   * Position to park head during tool change.
+   * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
+   */
+  //#define TOOLCHANGE_PARK
+  #if ENABLED(TOOLCHANGE_PARK)
+    #define TOOLCHANGE_PARK_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
+    #define TOOLCHANGE_PARK_XY_FEEDRATE 6000  // (mm/m)
+  #endif
+#endif
+
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Anet/A2plus/Configuration.h

@@ -154,17 +154,6 @@
 
 // For Cyclops or any "multi-extruder" that shares a single nozzle.
 //#define SINGLENOZZLE
-#if ENABLED(SINGLENOZZLE)
-  // Parameters for filament retract / prime on toolchange
-  #define SINGLENOZZLE_SWAP_LENGTH          12  // (mm)
-  #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600  // (mm/m)
-  #define SINGLENOZZLE_SWAP_PRIME_SPEED   3600  // (mm/m)
-  //#define SINGLENOZZLE_SWAP_PARK
-  #if ENABLED(SINGLENOZZLE_SWAP_PARK)
-    #define SINGLENOZZLE_TOOLCHANGE_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
-  #endif
-#endif
 
 /**
  * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@@ -945,9 +934,6 @@
 #define Y_MAX_POS Y_BED_SIZE
 #define Z_MAX_POS 200
 
-// Z raise distance for tool-change, as needed for some extruders
-#define TOOLCHANGE_ZRAISE     2  // (mm)
-
 /**
  * Software Endstops
  *

Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h

@@ -1094,6 +1094,33 @@
   #endif
 #endif
 
+/**
+ * Universal tool change settings.
+ * Applies to all types of extruders except where explicitly noted.
+ */
+#if EXTRUDERS > 1
+  // Z raise distance for tool-change, as needed for some extruders
+  #define TOOLCHANGE_ZRAISE     2  // (mm)
+
+  // Retract and prime filament on tool-change
+  //#define TOOLCHANGE_FILAMENT_SWAP
+  #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
+    #define TOOLCHANGE_FIL_SWAP_LENGTH          12  // (mm)
+    #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600  // (mm/m)
+    #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED   3600  // (mm/m)
+  #endif
+
+  /**
+   * Position to park head during tool change.
+   * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
+   */
+  //#define TOOLCHANGE_PARK
+  #if ENABLED(TOOLCHANGE_PARK)
+    #define TOOLCHANGE_PARK_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
+    #define TOOLCHANGE_PARK_XY_FEEDRATE 6000  // (mm/m)
+  #endif
+#endif
+
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Anet/A6/Configuration.h

@@ -154,17 +154,6 @@
 
 // For Cyclops or any "multi-extruder" that shares a single nozzle.
 //#define SINGLENOZZLE
-#if ENABLED(SINGLENOZZLE)
-  // Parameters for filament retract / prime on toolchange
-  #define SINGLENOZZLE_SWAP_LENGTH          12  // (mm)
-  #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600  // (mm/m)
-  #define SINGLENOZZLE_SWAP_PRIME_SPEED   3600  // (mm/m)
-  //#define SINGLENOZZLE_SWAP_PARK
-  #if ENABLED(SINGLENOZZLE_SWAP_PARK)
-    #define SINGLENOZZLE_TOOLCHANGE_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
-    #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000  // (mm/m)
-  #endif
-#endif
 
 /**
  * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@@ -1060,9 +1049,6 @@
 #define X_MAX_POS X_BED_SIZE
 #define Y_MAX_POS Y_BED_SIZE
 
-// Z raise distance for tool-change, as needed for some extruders
-#define TOOLCHANGE_ZRAISE     2  // (mm)
-
 /**
  * Software Endstops
  *

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -1093,6 +1093,33 @@
   #endif
 #endif
 
+/**
+ * Universal tool change settings.
+ * Applies to all types of extruders except where explicitly noted.
+ */
+#if EXTRUDERS > 1
+  // Z raise distance for tool-change, as needed for some extruders
+  #define TOOLCHANGE_ZRAISE     2  // (mm)
+
+  // Retract and prime filament on tool-change
+  //#define TOOLCHANGE_FILAMENT_SWAP
+  #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
+    #define TOOLCHANGE_FIL_SWAP_LENGTH          12  // (mm)
+    #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600  // (mm/m)
+    #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED   3600  // (mm/m)
+  #endif
+
+  /**
+   * Position to park head during tool change.
+   * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
+   */
+  //#define TOOLCHANGE_PARK
+  #if ENABLED(TOOLCHANGE_PARK)
+    #define TOOLCHANGE_PARK_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
+    #define TOOLCHANGE_PARK_XY_FEEDRATE 6000  // (mm/m)
+  #endif
+#endif
+
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.