Add Tronxy v10

Marlin/Configuration.h

@@ -3059,7 +3059,7 @@
 //#define MKS_ROBIN_TFT_V1_1R
 
 //
-// 480x320, 3.5", FSMC Stock Display from TronxXY
+// 480x320, 3.5", FSMC Stock Display from Tronxy
 //
 //#define TFT_TRONXY_X5SA
 

Marlin/src/core/boards.h

@@ -426,6 +426,7 @@
 #define BOARD_OPULO_LUMEN_REV4        4241  // Opulo Lumen PnP Controller REV4 (STM32F407VE / STM32F407VG)
 #define BOARD_FYSETC_SPIDER_KING407   4242  // FYSETC Spider King407 (STM32F407ZG)
 #define BOARD_MKS_SKIPR_V1            4243  // MKS SKIPR v1.0 all-in-one board (STM32F407VE)
+#define BOARD_TRONXY_V10              4244  // TRONXY V10 (STM32F446ZE)
 
 //
 // ARM Cortex M7

Marlin/src/pins/pins.h

@@ -711,6 +711,8 @@
   #include "stm32f4/pins_FYSETC_SPIDER_KING407.h" // STM32F4                              env:FYSETC_SPIDER_KING407
 #elif MB(MKS_SKIPR_V1)
   #include "stm32f4/pins_MKS_SKIPR_V1_0.h"      // STM32F4                                env:mks_skipr_v1 env:mks_skipr_v1_nobootloader
+#elif MB(TRONXY_V10)
+  #include "stm32f4/pins_TRONXY_V10.h"          // STM32F4                                env:STM32F446_tronxy
 
 //
 // ARM Cortex M7

Marlin/src/pins/stm32f4/pins_TH3D_EZBOARD_V2.h

@@ -24,6 +24,10 @@
 #define ALLOW_STM32DUINO
 #include "env_validate.h"
 
+#if HOTENDS > 1 || E_STEPPERS > 1
+  #error "TH3D EZBoard only supports 1 hotend / E stepper."
+#endif
+
 #define BOARD_INFO_NAME   "TH3D EZBoard V2"
 #define BOARD_WEBSITE_URL "th3dstudio.com"
 

Marlin/src/pins/stm32f4/pins_TRONXY_V10.h

@@ -0,0 +1,266 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "env_validate.h"
+
+#if HOTENDS > 3 || E_STEPPERS > 3
+  #error "Tronxy V10 supports up to 3 hotends / E steppers."
+#endif
+
+#define BOARD_INFO_NAME      "Tronxy V10"
+#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
+
+#define STEP_TIMER                             6
+#define TEMP_TIMER                            14
+
+//
+// Servos
+//
+//#define SERVO0_PIN                        PB10
+
+//
+// EEPROM
+//
+#if NO_EEPROM_SELECTED
+  #undef NO_EEPROM_SELECTED
+  #if TRONXY_UI > 0
+    #define EEPROM_AT24CXX
+  #else
+    #define FLASH_EEPROM_EMULATION
+  #endif
+#endif
+
+#if ENABLED(FLASH_EEPROM_EMULATION)
+  // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
+  #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)
+  #define EEPROM_PAGE_SIZE     (0x800U)           // 2KB, but will use 2x more (4KB)
+  #define MARLIN_EEPROM_SIZE    EEPROM_PAGE_SIZE
+#else
+  #if ENABLED(EEPROM_AT24CXX)
+    #define AT24CXX_SCL                     PB8
+    #define AT24CXX_SDA                     PB9
+    #define AT24CXX_WP                      PB7
+  #else
+    #define I2C_EEPROM                            // AT24C32
+  #endif
+  #define MARLIN_EEPROM_SIZE              0x1000  // 4K
+#endif
+
+//
+// SPI Flash
+//
+//#define SPI_FLASH
+#if ENABLED(SPI_FLASH)
+  #define SPI_FLASH_SIZE                0x200000  // 2MB
+  #define W25QXX_CS_PIN                     PG15  // SPI2
+  #define W25QXX_MOSI_PIN                   PB5
+  #define W25QXX_MISO_PIN                   PB4
+  #define W25QXX_SCK_PIN                    PB3
+#endif
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                           PC15
+#define X_MAX_PIN                           PB0
+#define Y_STOP_PIN                          PC14
+
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                   PE3
+#endif
+
+#if ENABLED(DUAL_Z_ENDSTOP_PROBE)
+  #if NUM_Z_STEPPERS > 1 && Z_HOME_TO_MAX         // Swap Z1/Z2 for dual Z with max homing
+    #define Z_MIN_PIN                       PF11
+    #define Z_MAX_PIN                       PC13
+  #else
+    #define Z_MIN_PIN                       PC13
+    #define Z_MAX_PIN                       PF11
+  #endif
+#else
+  #ifndef Z_STOP_PIN
+    #define Z_STOP_PIN                      PC13
+  #endif
+#endif
+//
+// Filament Sensors
+//
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN                    PE6   // MT_DET
+#endif
+#ifndef FIL_RUNOUT2_PIN
+  #define FIL_RUNOUT2_PIN                   PF12
+#endif
+
+//
+// Steppers
+//
+#define X_ENABLE_PIN                        PF0
+#define X_STEP_PIN                          PE5
+#define X_DIR_PIN                           PF1
+
+#define Y_ENABLE_PIN                        PF5
+#define Y_STEP_PIN                          PF9
+#define Y_DIR_PIN                           PF3
+
+#define Z_ENABLE_PIN                        PA5
+#define Z_STEP_PIN                          PA6
+#define Z_DIR_PIN                           PF15
+
+#define E0_ENABLE_PIN                       PF14
+#define E0_STEP_PIN                         PB1
+#define E0_DIR_PIN                          PF13
+
+#define E1_ENABLE_PIN                       PG5
+#define E1_STEP_PIN                         PD12
+#define E1_DIR_PIN                          PG4
+
+#define E2_ENABLE_PIN                       PF7
+#define E2_STEP_PIN                         PF6
+#define E2_DIR_PIN                          PF4
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                          PC3   // TH1
+#define TEMP_BED_PIN                        PC2   // TB1
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                        PG7   // HEATER1
+#define HEATER_BED_PIN                      PE2   // HOT BED
+//#define HEATER_BED_INVERTING              true
+
+#define FAN_PIN                             PG0   // FAN0
+#define FAN1_PIN                            PB6   // FAN1
+#define FAN2_PIN                            PG9   // FAN2
+#define FAN3_PIN                            PF10  // FAN3
+#define CONTROLLER_FAN_PIN                  PD7   // BOARD FAN
+#define FAN_SOFT_PWM
+
+//
+// Laser / Spindle
+//
+#if HAS_CUTTER
+  #define SPINDLE_LASER_ENA_PIN             PB11  // wifi:TX
+  #if ENABLED(SPINDLE_LASER_USE_PWM)
+    #define SPINDLE_LASER_PWM_PIN           PB10  // wifi:RX-TIM2_CH3
+    // The PWM pin definition const PinMap PinMap_PWM[] in PeripheralPins.c must be compounded here
+    // See PWM_PIN(x) definition for details
+  #endif
+#endif
+
+//
+// Misc
+//
+#define BEEPER_PIN                          PA8
+
+//#define LED_PIN                           PG10
+#define PS_ON_PIN                           PG10  // Temporarily switch the machine with LED simulation
+
+#if ENABLED(TRONXY_BACKUP_POWER)
+  #define POWER_LOSS_PIN                    PF11  // Configure as drop-down input
+#else
+  #define POWER_LOSS_PIN                    PE1   // Output of LM393 comparator, configured as pullup
+#endif
+//#define POWER_LM393_PIN                   PE0   // +V for the LM393 comparator, configured as output high
+
+#if ENABLED(TFT_TRONXY_X5SA)
+  #error "TFT_TRONXY_X5SA is not yet supported."
+#endif
+
+#if 0
+
+//
+// TFT with FSMC interface
+//
+#if HAS_FSMC_TFT
+  #define TFT_RESET_PIN                     PB12
+  #define TFT_BACKLIGHT_PIN                 PG8
+
+  #define LCD_USE_DMA_FSMC                        // Use DMA transfers to send data to the TFT
+  #define FSMC_DMA_DEV                      DMA2
+  #define FSMC_DMA_CHANNEL               DMA_CH5
+
+  #define TFT_CS_PIN                        PG12
+  #define TFT_RS_PIN                        PG2
+
+  //#define TFT_WIDTH                        480
+  //#define TFT_HEIGHT                       320
+  //#define TFT_PIXEL_OFFSET_X                48
+  //#define TFT_PIXEL_OFFSET_Y                32
+  //#define TFT_DRIVER                   ILI9488
+  //#define TFT_BUFFER_SIZE                14400
+
+  #if NEED_TOUCH_PINS
+    #define TOUCH_CS_PIN                    PD11  // SPI1_NSS
+    #define TOUCH_SCK_PIN                   PB13  // SPI1_SCK
+    #define TOUCH_MISO_PIN                  PB14  // SPI1_MISO
+    #define TOUCH_MOSI_PIN                  PB15  // SPI1_MOSI
+  #endif
+
+  #if (LCD_CHIP_INDEX == 1 && (TRONXY_UI == 1 || TRONXY_UI == 2)) || LCD_CHIP_INDEX == 3
+    #define TOUCH_CALIBRATION_X           -17181
+    #define TOUCH_CALIBRATION_Y            11434
+    #define TOUCH_OFFSET_X                   501
+    #define TOUCH_OFFSET_Y                    -9
+  #elif LCD_CHIP_INDEX == 1 && TRONXY_UI == 4
+    #define TOUCH_CALIBRATION_X            11166
+    #define TOUCH_CALIBRATION_Y            17162
+    #define TOUCH_OFFSET_X                   -10
+    #define TOUCH_OFFSET_Y                   -16
+  #elif LCD_CHIP_INDEX == 4 && TRONXY_UI == 3
+    //#define TOUCH_CALIBRATION_X           8781
+    //#define TOUCH_CALIBRATION_Y          11773
+    //#define TOUCH_OFFSET_X                 -17
+    //#define TOUCH_OFFSET_Y                 -16
+    // Upside-down
+    #define TOUCH_CALIBRATION_X            -8553
+    #define TOUCH_CALIBRATION_Y           -11667
+    #define TOUCH_OFFSET_X                   253
+    #define TOUCH_OFFSET_Y                   331
+  #elif LCD_CHIP_INDEX == 2
+    #define TOUCH_CALIBRATION_X            17184
+    #define TOUCH_CALIBRATION_Y            10604
+    #define TOUCH_OFFSET_X                   -31
+    #define TOUCH_OFFSET_Y                   -29
+  #endif
+#endif
+
+#endif
+
+//
+// SD Card
+//
+#define SDIO_SUPPORT
+#define SD_DETECT_PIN                       -1    // PF0, but not connected
+#define SDIO_CLOCK                       4500000
+#define SDIO_READ_RETRIES                     16
+
+#define SDIO_D0_PIN                         PC8
+#define SDIO_D1_PIN                         PC9
+#define SDIO_D2_PIN                         PC10
+#define SDIO_D3_PIN                         PC11
+#define SDIO_CK_PIN                         PC12
+#define SDIO_CMD_PIN                        PD2

buildroot/share/PlatformIO/boards/marlin_STM32F446ZET_tronxy.json

@@ -0,0 +1,35 @@
+{
+  "build": {
+    "cpu": "cortex-m4",
+    "extra_flags": "-DSTM32F446xx",
+    "f_cpu": "180000000L",
+    "mcu": "stm32f446zet6",
+    "variant": "MARLIN_F446Zx_TRONXY"
+  },
+  "connectivity": [
+    "can"
+  ],
+  "debug": {
+    "jlink_device": "STM32F446ZE",
+    "openocd_target": "stm32f4x",
+    "svd_path": "STM32F446x.svd"
+  },
+  "frameworks": [
+    "arduino",
+    "stm32cube"
+  ],
+  "name": "STM32F446ZE (128k RAM. 512k Flash)",
+  "upload": {
+    "maximum_ram_size": 131072,
+    "maximum_size": 524288,
+    "protocol": "stlink",
+    "protocols": [
+      "jlink",
+      "stlink",
+      "blackmagic",
+      "serial"
+    ]
+  },
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html",
+  "vendor": "Generic"
+}