🎨 Misc. LCD cleanup

Marlin/Configuration_adv.h

@@ -2092,7 +2092,7 @@
   //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
     //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
-    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
+    //#define BABYSTEP_GFX_OVERLAY          // Enable graphical overlay on Z-offset editor
   #endif
 #endif
 

Marlin/src/feature/bedlevel/abl/bbl.cpp

@@ -153,7 +153,7 @@ void LevelingBilinear::extrapolate_unprobed_bed_level() {
     }
 }
 
-void LevelingBilinear::print_leveling_grid(const bed_mesh_t* _z_values /*= NULL*/) {
+void LevelingBilinear::print_leveling_grid(const bed_mesh_t* _z_values/*=nullptr*/) {
   // print internal grid(s) or just the one passed as a parameter
   SERIAL_ECHOLNPGM("Bilinear Leveling Grid:");
   print_2d_array(GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y, 3, _z_values ? *_z_values[0] : z_values[0]);

Marlin/src/feature/bedlevel/abl/bbl.h

@@ -53,7 +53,7 @@ class LevelingBilinear {
   static void reset();
   static void set_grid(const xy_pos_t& _grid_spacing, const xy_pos_t& _grid_start);
   static void extrapolate_unprobed_bed_level();
-  static void print_leveling_grid(const bed_mesh_t* _z_values = NULL);
+  static void print_leveling_grid(const bed_mesh_t *_z_values=nullptr);
   static void refresh_bed_level();
   static bool has_mesh() { return !!grid_spacing.x; }
   static bool mesh_is_valid() { return has_mesh(); }

Marlin/src/inc/SanityCheck.h

@@ -670,6 +670,8 @@
   #error "MILLISECONDS_PREHEAT_TIME is now PREHEAT_TIME_HOTEND_MS."
 #elif defined(EXPERIMENTAL_SCURVE)
   #error "EXPERIMENTAL_SCURVE is no longer needed and should be removed."
+#elif defined(BABYSTEP_ZPROBE_GFX_OVERLAY)
+   #error "BABYSTEP_ZPROBE_GFX_OVERLAY is now BABYSTEP_GFX_OVERLAY."
 #endif
 
 // L64xx stepper drivers have been removed
@@ -1042,10 +1044,10 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS
     #error "MESH_BED_LEVELING and BABYSTEP_ZPROBE_OFFSET is not a valid combination"
   #elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && !HAS_BED_PROBE
     #error "BABYSTEP_ZPROBE_OFFSET requires a probe."
-  #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && NONE(HAS_MARLINUI_U8GLIB, IS_DWIN_MARLINUI)
-    #error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a Graphical LCD."
-  #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && DISABLED(BABYSTEP_ZPROBE_OFFSET)
-    #error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a BABYSTEP_ZPROBE_OFFSET."
+  #elif ENABLED(BABYSTEP_GFX_OVERLAY) && NONE(HAS_MARLINUI_U8GLIB, IS_DWIN_MARLINUI)
+    #error "BABYSTEP_GFX_OVERLAY requires a Graphical LCD."
+  #elif ENABLED(BABYSTEP_GFX_OVERLAY) && DISABLED(BABYSTEP_ZPROBE_OFFSET)
+    #error "BABYSTEP_GFX_OVERLAY requires a BABYSTEP_ZPROBE_OFFSET."
   #elif ENABLED(BABYSTEP_HOTEND_Z_OFFSET) && !HAS_HOTEND_OFFSET
     #error "BABYSTEP_HOTEND_Z_OFFSET requires 2 or more HOTENDS."
   #elif BOTH(BABYSTEP_ALWAYS_AVAILABLE, MOVE_Z_WHEN_IDLE)

Marlin/src/lcd/dogm/marlinui_DOGM.cpp

@@ -628,7 +628,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop
 
   #endif // AUTO_BED_LEVELING_UBL
 
-  #if EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
+  #if EITHER(BABYSTEP_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
 
     //
     // Draw knob rotation => Z motion key for:
@@ -746,7 +746,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop
       }
     }
 
-  #endif // BABYSTEP_ZPROBE_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY
+  #endif // BABYSTEP_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY
 
 #endif // HAS_MARLINUI_MENU
 

Marlin/src/lcd/e3v2/marlinui/ui_common.cpp

@@ -565,7 +565,7 @@ void MarlinUI::draw_status_message(const bool blink) {
 
   #endif // AUTO_BED_LEVELING_UBL
 
-  #if EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
+  #if EITHER(BABYSTEP_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
 
     void MarlinUI::zoffset_overlay(const int8_t dir) {
       const int rot_up = TERN(OVERLAY_GFX_REVERSE, ICON_RotateCCW, ICON_RotateCW),
@@ -587,7 +587,7 @@ void MarlinUI::draw_status_message(const bool blink) {
       DWIN_ICON_Show(ICON, rot_up, LCD_PIXEL_WIDTH - 10 - 48, arrow_y);
     }
 
-  #endif // BABYSTEP_ZPROBE_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY
+  #endif // BABYSTEP_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY
 
 #endif // HAS_MARLINUI_MENU
 

Marlin/src/lcd/e3v2/proui/dwin.cpp

@@ -1271,7 +1271,6 @@ void EachMomentUpdate() {
 
     if ((Printing() != HMI_flag.printing_flag) && !HMI_flag.home_flag) {
       HMI_flag.printing_flag = Printing();
-      DEBUG_ECHOLNPGM("printing_flag: ", HMI_flag.printing_flag);
       if (HMI_flag.printing_flag)
         DWIN_Print_Started();
       else if (HMI_flag.abort_flag)
@@ -1282,7 +1281,6 @@ void EachMomentUpdate() {
 
     if ((printingIsPaused() != HMI_flag.pause_flag) && !HMI_flag.home_flag) {
       HMI_flag.pause_flag = printingIsPaused();
-      DEBUG_ECHOLNPGM("pause_flag: ", HMI_flag.pause_flag);
       if (HMI_flag.pause_flag)
         DWIN_Print_Pause();
       else if (HMI_flag.abort_flag)
@@ -1628,7 +1626,6 @@ void DWIN_LevelingDone() {
 
 // Started a Print Job
 void DWIN_Print_Started() {
-  DEBUG_ECHOLNPGM("DWIN_Print_Started: ", SD_Printing());
   TERN_(HAS_GCODE_PREVIEW, if (Host_Printing()) Preview_Invalidate());
   _percent_done = 0;
   _remain_time = 0;
@@ -1642,20 +1639,17 @@ void DWIN_Print_Started() {
 
 // Pause a print job
 void DWIN_Print_Pause() {
-  DEBUG_ECHOLNPGM("DWIN_Print_Pause");
   ICON_ResumeOrPause();
 }
 
 // Resume print job
 void DWIN_Print_Resume() {
-  DEBUG_ECHOLNPGM("DWIN_Print_Resume");
   ICON_ResumeOrPause();
   LCD_MESSAGE(MSG_RESUME_PRINT);
 }
 
 // Ended print job
 void DWIN_Print_Finished() {
-  DEBUG_ECHOLNPGM("DWIN_Print_Finished");
   TERN_(POWER_LOSS_RECOVERY, if (card.isPrinting()) recovery.cancel());
   HMI_flag.pause_flag = false;
   wait_for_heatup = false;
@@ -1666,7 +1660,6 @@ void DWIN_Print_Finished() {
 
 // Print was aborted
 void DWIN_Print_Aborted() {
-  DEBUG_ECHOLNPGM("DWIN_Print_Aborted");
   DWIN_Print_Finished();
 }
 
@@ -1714,7 +1707,6 @@ void DWIN_SetColorDefaults() {
 }
 
 void DWIN_SetDataDefaults() {
-  DEBUG_ECHOLNPGM("DWIN_SetDataDefaults");
   DWIN_SetColorDefaults();
   DWINUI::SetColors(HMI_data.Text_Color, HMI_data.Background_Color, HMI_data.StatusBg_Color);
   TERN_(PIDTEMP, HMI_data.HotendPidT = DEF_HOTENDPIDT);
@@ -1738,13 +1730,10 @@ void DWIN_SetDataDefaults() {
 }
 
 void DWIN_CopySettingsTo(char * const buff) {
-  DEBUG_ECHOLNPGM("DWIN_CopySettingsTo");
-  DEBUG_ECHOLNPGM("HMI_data: ", sizeof(HMI_data_t));
   memcpy(buff, &HMI_data, eeprom_data_size);
 }
 
 void DWIN_CopySettingsFrom(const char * const buff) {
-  DEBUG_ECHOLNPGM("DWIN_CopySettingsFrom");
   memcpy(&HMI_data, buff, sizeof(HMI_data_t));
   if (HMI_data.Text_Color == HMI_data.Background_Color) DWIN_SetColorDefaults();
   DWINUI::SetColors(HMI_data.Text_Color, HMI_data.Background_Color, HMI_data.StatusBg_Color);
@@ -1764,18 +1753,14 @@ void DWIN_CopySettingsFrom(const char * const buff) {
 
 // Initialize or re-initialize the LCD
 void MarlinUI::init_lcd() {
-  DEBUG_ECHOLNPGM("MarlinUI::init_lcd");
   delay(750);   // wait to wakeup screen
   const bool hs = DWIN_Handshake(); UNUSED(hs);
-  DEBUG_ECHOPGM("DWIN_Handshake ");
-  DEBUG_ECHOLNF(hs ? F("ok.") : F("error."));
   DWIN_Frame_SetDir(1);
   DWIN_JPG_CacheTo1(Language_English);
   Encoder_Configuration();
 }
 
 void DWIN_InitScreen() {
-  DEBUG_ECHOLNPGM("DWIN_InitScreen");
   DWIN_SetColorDefaults();
   HMI_Init();   // draws boot screen
   DWINUI::init();
@@ -2034,7 +2019,6 @@ void AutoHome() { queue.inject_P(G28_STR); }
     #if EITHER(BABYSTEP_ZPROBE_OFFSET, JUST_BABYSTEP)
       const_float_t step_zoffset = round((MenuData.Value / 100.0f) * planner.settings.axis_steps_per_mm[Z_AXIS]) - babystep.accum;
       if (BABYSTEP_ALLOWED()) babystep.add_steps(Z_AXIS, step_zoffset);
-      //DEBUG_ECHOLNF(F("BB Steps: "), step_zoffset);
     #endif
   }
   void SetZOffset() {

Marlin/src/lcd/e3v2/proui/gcode_preview.cpp

@@ -135,7 +135,7 @@ bool Has_Preview() {
       Get_Value(buf, ";MAXZ:", fileprop.height);
       fileprop.height -= tmp;
       posptr = strstr(buf, tbstart);
-      if (posptr != NULL) {
+      if (posptr != nullptr) {
         fileprop.thumbstart = indx + (posptr - &buf[0]);
       }
       else {

Marlin/src/lcd/extui/anycubic_chiron/FileNavigator.cpp

@@ -70,7 +70,6 @@ char      FileNavigator::currentfoldername[MAX_PATH_LEN + 1];   // Current folde
 FileNavigator::FileNavigator() { reset(); }
 
 void FileNavigator::reset() {
-  DEBUG_ECHOLNPGM("reset()");
   currentfoldername[0] = '\0';
   currentfolderdepth = 0;
   currentindex = 0;
@@ -86,7 +85,6 @@ void FileNavigator::refresh() { filelist.refresh(); }
 
 void FileNavigator::changeDIR(const char *folder) {
   if (currentfolderdepth >= MAX_FOLDER_DEPTH) return; // limit the folder depth
-  DEBUG_ECHOLNPGM("FD:" , folderdepth, " FP:",currentindex, " currentfolder:", currentfoldername, " enter:", folder);
   currentfolderindex[currentfolderdepth] = currentindex;
   strcat(currentfoldername, folder);
   strcat(currentfoldername, "/");
@@ -96,7 +94,6 @@ void FileNavigator::changeDIR(const char *folder) {
 }
 
 void FileNavigator::upDIR() {
-  DEBUG_ECHOLNPGM("upDIR() from D:", currentfolderdepth, " N:", currentfoldername);
   if (!filelist.isAtRootDir()) {
     filelist.upDir();
     currentfolderdepth--;
@@ -117,7 +114,6 @@ void FileNavigator::skiptofileindex(uint16_t skip) {
   if (skip == 0) return;
   while (skip > 0) {
     if (filelist.seek(currentindex)) {
-      DEBUG_ECHOLNPGM("CI:", currentindex, " FD:", currentfolderdepth, " N:", skip, " ", filelist.longFilename());
       if (!filelist.isDir()) {
         skip--;
         currentindex++;
@@ -151,8 +147,6 @@ void FileNavigator::skiptofileindex(uint16_t skip) {
     }
     lastpanelindex = index;
 
-    DEBUG_ECHOLNPGM("index=", index, " currentindex=", currentindex);
-
     if (currentindex == 0 && currentfolderdepth > 0) { // Add a link to go up a folder
       // The new panel ignores entries that don't end in .GCO or .gcode so add and pad them.
       if (paneltype <= AC_panel_new) {
@@ -166,12 +160,8 @@ void FileNavigator::skiptofileindex(uint16_t skip) {
       filesneeded--;
     }
 
-    for (uint16_t seek = currentindex; seek < currentindex + filesneeded; seek++) {
-      if (filelist.seek(seek)) {
-        sendFile(paneltype);
-        DEBUG_ECHOLNPGM("-", seek, " '", filelist.longFilename(), "' '", currentfoldername, "", filelist.shortFilename(), "'");
-      }
-    }
+    for (uint16_t seek = currentindex; seek < currentindex + filesneeded; seek++)
+      if (filelist.seek(seek)) sendFile(paneltype);
   }
 
   void FileNavigator::sendFile(panel_type_t paneltype) {
@@ -212,7 +202,6 @@ void FileNavigator::skiptofileindex(uint16_t skip) {
 #else // Flat file list
 
   void FileNavigator::getFiles(uint16_t index, panel_type_t paneltype, uint8_t filesneeded) {
-    DEBUG_ECHOLNPGM("getFiles() I:", index," L:", lastpanelindex);
     // if we're searching backwards, jump back to start and search forward
     if (index < lastpanelindex) {
       reset();
@@ -248,7 +237,6 @@ void FileNavigator::skiptofileindex(uint16_t skip) {
     TFTSer.println(filelist.shortFilename());
     if (currentfolderdepth > 0) TFTSer.print(currentfoldername);
     TFTSer.println(filelist.longFilename());
-    DEBUG_ECHOLNPGM("/", currentfoldername, "", filelist.shortFilename(), " ", filelist.longFilename());
   }
 
 #endif // Flat file list

Marlin/src/lcd/extui/anycubic_i3mega/anycubic_i3mega_lcd.cpp

@@ -704,7 +704,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
             break;
 
           case 16: { // A16 set hotend temp
-            unsigned int tempvalue;
+            uint16_t tempvalue;
             if (CodeSeen('S')) {
               tempvalue = constrain(CodeValue(), 0, 275);
               setTargetTemp_celsius(tempvalue, (extruder_t)E0);
@@ -719,7 +719,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
           break;
 
           case 17: { // A17 set heated bed temp
-            unsigned int tempbed;
+            uint16_t tempbed;
             if (CodeSeen('S')) {
               tempbed = constrain(CodeValue(), 0, 100);
               setTargetTemp_celsius(tempbed, (heater_t)BED);
@@ -777,7 +777,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
           case 22: // A22 move X/Y/Z or extrude
             if (!isPrinting()) {
               float coorvalue;
-              unsigned int movespeed = 0;
+              uint16_t movespeed = 0;
               char commandStr[30];
               char fullCommandStr[38];
 

Marlin/src/lcd/extui/dgus/DGUSDisplay.cpp

@@ -141,7 +141,6 @@ void DGUSDisplay::ProcessRx() {
     if (!LCD_SERIAL.available() && LCD_SERIAL.buffer_overruns()) {
       // Overrun, but reset the flag only when the buffer is empty
       // We want to extract as many as valid datagrams possible...
-      DEBUG_ECHOPGM("OVFL");
       rx_datagram_state = DGUS_IDLE;
       //LCD_SERIAL.reset_rx_overun();
       LCD_SERIAL.flush();
@@ -205,17 +204,11 @@ void DGUSDisplay::ProcessRx() {
         |           Command          DataLen (in Words) */
         if (command == DGUS_CMD_READVAR) {
           const uint16_t vp = tmp[0] << 8 | tmp[1];
-          //const uint8_t dlen = tmp[2] << 1;  // Convert to Bytes. (Display works with words)
-          //DEBUG_ECHOPGM(" vp=", vp, " dlen=", dlen);
           DGUS_VP_Variable ramcopy;
           if (populate_VPVar(vp, &ramcopy)) {
             if (ramcopy.set_by_display_handler)
               ramcopy.set_by_display_handler(ramcopy, &tmp[3]);
-            else
-              DEBUG_ECHOLNPGM(" VPVar found, no handler.");
           }
-          else
-            DEBUG_ECHOLNPGM(" VPVar not found:", vp);
 
           rx_datagram_state = DGUS_IDLE;
           break;
@@ -260,9 +253,7 @@ bool DGUSDisplay::Initialized = false,
 #define sw_barrier() asm volatile("": : :"memory");
 
 bool populate_VPVar(const uint16_t VP, DGUS_VP_Variable * const ramcopy) {
-  //DEBUG_ECHOPGM("populate_VPVar ", VP);
   const DGUS_VP_Variable *pvp = DGUSLCD_FindVPVar(VP);
-  //DEBUG_ECHOLNPGM(" pvp ", (uint16_t )pvp);
   if (!pvp) return false;
   memcpy_P(ramcopy, pvp, sizeof(DGUS_VP_Variable));
   return true;