M111/M115 Followup

Marlin/Configuration_adv.h

@@ -3836,38 +3836,6 @@
  */
 //#define CNC_COORDINATE_SYSTEMS
 
-// @section reporting
-
-/**
- * Auto-report fan speed with M123 S<seconds>
- * Requires fans with tachometer pins
- */
-//#define AUTO_REPORT_FANS
-
-/**
- * Auto-report temperatures with M155 S<seconds>
- */
-#define AUTO_REPORT_TEMPERATURES
-#if ENABLED(AUTO_REPORT_TEMPERATURES) && TEMP_SENSOR_REDUNDANT
- //#define AUTO_REPORT_REDUNDANT // Include the "R" sensor in the auto-report
-#endif
-
-/**
- * Auto-report position with M154 S<seconds>
- */
-//#define AUTO_REPORT_POSITION
-#if ENABLED(AUTO_REPORT_POSITION)
- //#define AUTO_REPORT_REAL_POSITION // Auto-report the real position
-#endif
-
-/**
- * Include capabilities in M115 output
- */
-#define EXTENDED_CAPABILITIES_REPORT
-#if ENABLED(EXTENDED_CAPABILITIES_REPORT)
- //#define M115_GEOMETRY_REPORT
-#endif
-
 // @section security
 
 /**
@@ -3910,13 +3878,51 @@
 
 // @section reporting
 
-// Extra options for the M114 "Current Position" report
+/**
+ * Extra options for the M114 "Current Position" report
+ */
 //#define M114_DETAIL // Use 'M114` for details to check planner calculations
 //#define M114_REALTIME // Real current position based on forward kinematics
 //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed.
 
+
+/**
+ * Auto-report fan speed with M123 S<seconds>
+ * Requires fans with tachometer pins
+ */
+//#define AUTO_REPORT_FANS
+
 //#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
 
+/**
+ * Auto-report temperatures with M155 S<seconds>
+ */
+#define AUTO_REPORT_TEMPERATURES
+#if ENABLED(AUTO_REPORT_TEMPERATURES) && TEMP_SENSOR_REDUNDANT
+ //#define AUTO_REPORT_REDUNDANT // Include the "R" sensor in the auto-report
+#endif
+
+/**
+ * Auto-report position with M154 S<seconds>
+ */
+//#define AUTO_REPORT_POSITION
+#if ENABLED(AUTO_REPORT_POSITION)
+ //#define AUTO_REPORT_REAL_POSITION // Auto-report the real position
+#endif
+
+/**
+ * M115 - Report capabilites. Disable to save ~1150 bytes of flash.
+ * Some hosts (and serial TFT displays) rely on this feature.
+ */
+#define CAPABILITIES_REPORT
+#if ENABLED(CAPABILITIES_REPORT)
+ // Include capabilities in M115 output
+ #define EXTENDED_CAPABILITIES_REPORT
+ #if ENABLED(EXTENDED_CAPABILITIES_REPORT)
+ //#define M115_GEOMETRY_REPORT
+ #endif
+#endif
+
 // @section gcode
 
 /**
@@ -3928,7 +3934,9 @@
  //#define GCODE_QUOTED_STRINGS // Support for quoted string parameters
 #endif
 
-// Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
+/**
+ * Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
+ */
 //#define MEATPACK_ON_SERIAL_PORT_1
 //#define MEATPACK_ON_SERIAL_PORT_2
 
@@ -3942,12 +3950,6 @@
  */
 #define DEBUG_FLAGS_GCODE
 
-/**
- * M115 - Report capabilites. Disable to save ~1150 bytes of flash.
- * Some hosts (and serial TFT displays) rely on this feature.
- */
-#define REPORT_CAPABILITIES_GCODE
-
 /**
  * Enable this option for a leaner build of Marlin that removes
  * workspace offsets to slightly optimize performance.
@@ -3975,8 +3977,6 @@
  //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
 #endif
 
-// @section gcode
-
 /**
  * Startup commands
  *

Marlin/src/gcode/gcode.cpp

@@ -670,7 +670,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
  case 92: M92(); break; // M92: Set the steps-per-unit for one or more axes
  case 114: M114(); break; // M114: Report current position
 
- #if ENABLED(REPORT_CAPABILITIES_GCODE)
+ #if ENABLED(CAPABILITIES_REPORT)
  case 115: M115(); break; // M115: Report capabilities
  #endif
 

Marlin/src/gcode/gcode.h

@@ -149,7 +149,7 @@
  *
  * M113 - Get or set the timeout interval for Host Keepalive "busy" messages. (Requires HOST_KEEPALIVE_FEATURE)
  * M114 - Report current position.
- * M115 - Report capabilities. (Extended capabilities requires EXTENDED_CAPABILITIES_REPORT)
+ * M115 - Report capabilities. (Requires CAPABILITIES_REPORT)
  * M117 - Display a message on the controller screen. (Requires an LCD)
  * M118 - Display a message in the host console.
  *
@@ -761,7 +761,7 @@ class GcodeSuite {
 
  static void M114();
 
- #if ENABLED(REPORT_CAPABILITIES_GCODE)
+ #if ENABLED(CAPABILITIES_REPORT)
  static void M115();
  #endif
 

Marlin/src/gcode/host/M115.cpp

@@ -22,7 +22,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(REPORT_CAPABILITIES_GCODE)
+#if ENABLED(CAPABILITIES_REPORT)
 
 #include "../gcode.h"
 #include "../queue.h" // for getting the command port
@@ -275,4 +275,4 @@ void GcodeSuite::M115() {
  #endif // EXTENDED_CAPABILITIES_REPORT
 }
 
-#endif // REPORT_CAPABILITIES_GCODE
+#endif // CAPABILITIES_REPORT

Marlin/src/inc/Warnings.cpp

@@ -46,8 +46,8 @@
  #warning "DEBUG_FLAGS_GCODE is recommended if you have space. Some hosts rely on it."
 #endif
 
-#if DISABLED(REPORT_CAPABILITIES_GCODE)
- #warning "REPORT_CAPABILITIES_GCODE is recommended if you have space. Some hosts rely on it."
+#if DISABLED(CAPABILITIES_REPORT)
+ #warning "CAPABILITIES_REPORT is recommended if you have space. Some hosts rely on it."
 #endif
 
 #if ENABLED(LA_DEBUG)

Marlin/src/lcd/e3v2/proui/dwin.cpp

@@ -2306,7 +2306,7 @@ void setMoveZ() { hmiValue.axis = Z_AXIS; setPFloatOnClick(Z_MIN_POS, Z_MAX_POS,
  #endif
 #endif
 
-#if ENABLED(ADVANCED_PAUSE_FEATURE)
+#if ENABLED(CONFIGURE_FILAMENT_CHANGE)
  void setFilLoad() { setPFloatOnClick(0, EXTRUDE_MAXLENGTH, UNITFDIGITS); }
  void setFilUnload() { setPFloatOnClick(0, EXTRUDE_MAXLENGTH, UNITFDIGITS); }
 #endif

ini/features.ini

@@ -323,7 +323,7 @@ CNC_COORDINATE_SYSTEMS = build_src_filter=+<src/gcode/geometry/G
 HAS_HOME_OFFSET = build_src_filter=+<src/gcode/geometry/M206_M428.cpp>
 EXPECTED_PRINTER_CHECK = build_src_filter=+<src/gcode/host/M16.cpp>
 HOST_KEEPALIVE_FEATURE = build_src_filter=+<src/gcode/host/M113.cpp>
-REPORT_CAPABILITIES_GCODE = build_src_filter=+<src/gcode/host/M115.cpp>
+CAPABILITIES_REPORT  = build_src_filter=+<src/gcode/host/M115.cpp>
 AUTO_REPORT_POSITION = build_src_filter=+<src/gcode/host/M154.cpp>
 REPETIER_GCODE_M360 = build_src_filter=+<src/gcode/host/M360.cpp>
 HAS_GCODE_M876 = build_src_filter=+<src/gcode/host/M876.cpp>