Turn Details Overlay on Boardview

megamek/i18n/megamek/client/messages.properties

@@ -311,17 +311,17 @@ BoardView1.ConversionMode.TRACKED=Tracked
 BoardView1.ConversionMode.WHEELED=Wheeled
 BoardView1.ConversionMode.WIGE=AirMech
 BoardView1.ConversionMode.AERODYNE=Fighter
-BoardView1.charge=Charges. Needs {0}
-BoardView1.charge1=(Charging)
+BoardView1.ChargeAttackAction=Charges. Needs {0}
+BoardView1.ChargeAttackAction1=(Charging)
 BoardView1.CrewDead=CREW DEAD
-BoardView1.DFA1=(Executing DFA)
+BoardView1.DfaAttackAction1=(Executing DFA)
 BoardView1.Drop=Drop
 BoardView1.Command-=Command-
 BoardView1.Command=Command
 BoardView1.Conventional=Conv (
 BoardView1.DEPTH=DEPTH 
 BoardView1.detonated=detonated (
-BoardView1.DFA=DFA. Needs {0}
+BoardView1.DfaAttackAction=DFA. Needs {0}
 BoardView1.Disconnect=Disconnect
 BoardView1.ecmSource=ECM Source
 BoardView1.eccmSource=ECCM Source
@@ -340,7 +340,7 @@ BoardView1.Height=Height
 BoardView1.HEIGHT=HEIGHT 
 BoardView1.Hex=Hex 
 BoardView1.HIDDEN=HIDDEN
-BoardView1.hit=Hits with {0}. Needs {1} 
+BoardView1.ClubAttackAction=Hits with {0}. Needs {1} 
 BoardView1.Hover=Hover
 BoardView1.ID=\ ID:
 BoardView1.IMMOBILE=IMMOBILE
@@ -384,14 +384,15 @@ BoardView1.on=on
 BoardView1.pilot=\ Pilot
 BoardView1.PRONE=PRONE
 BoardView1.NO_GYRO=NO GYRO
-BoardView1.proto=Makes a protomech frenzy attack. Needs {0}
+BoardView1.ProtomechPhysicalAttackAction=Makes a protomech frenzy attack. Needs {0}
 BoardView1.punchBoth=Punches with both arms. Left needs {0}; Right needs {1}
 BoardView1.punchLeft=Punches with left arm. Needs {0}
 BoardView1.punchRight=Punches with right arm. Needs {0}
-BoardView1.push=Pushes. Needs {0}
+BoardView1.PushAttackAction=Pushes. Needs {0}
 BoardView1.Rubble=Rubble
-BoardView1.Searchlight=Illuminates with searchlight.
+BoardView1.SearchlightAttackAction=Illuminates with searchlight.
 BoardView1.Smoke={0} smoke hex(es) in line of sight.\n
+BoardView1.SpotAction=Spot {0}
 BoardView1.STUCK=STUCK
 BoardView1.STUNNED=STUNNED:{0}
 BoardView1.SWARMED=SWARMED
@@ -1051,6 +1052,7 @@ CommonMenuBar.physicalPush=Push
 CommonMenuBar.physicalThrash=Thrash
 CommonMenuBar.physicalVibro=Vibro Claw
 CommonMenuBar.PrintMenu=Print
+CommonMenuBar.turnDetailsOverlay=Show turn details overlay
 CommonMenuBar.SpecialMenu=Special
 CommonMenuBar.UnitListMenu=Units
 CommonMenuBar.Vibrabomb=Vibrabomb({0})
@@ -1804,6 +1806,8 @@ KeyBinds.cmdNames.toggleKeybinds=Keybindings Display
 KeyBinds.cmdDesc.toggleKeybinds=Toggles the map overlay showing various key shortcuts
 KeyBinds.cmdNames.togglePlanetaryConditions=Planetary Conditions Display
 KeyBinds.cmdDesc.togglePlanetaryConditions=Toggles the map overlay showing Planetary Conditions
+KeyBinds.cmdNames.toggleTurnDetails=Turn Details Display
+KeyBinds.cmdDesc.toggleTurnDetails=Toggles the map overlay showing Turn Details
 KeyBinds.cmdNames.toggleHexCoords=Toggle Hex Coords
 KeyBinds.cmdDesc.toggleHexCoords=Toggles the map showing the coords on each hex
 KeyBinds.cmdNames.toggleMinimap=Toggle Minimap
@@ -3456,6 +3460,8 @@ TriggerBPodDialog.title=Trigger ABA Pods
 TriggerBPodDialog.ChooseTargetDialog.message=Hex {0} contains the following targets.\n\nWhich target do you want to attack?"
 TriggerBPodDialog.ChooseTargetDialog.title=Choose Target
 
+TurnDetailsOverlay.heading=Turn Details - {0} to toggle
+
 UnitDisplay.SwitchLocation=switch location
 UnitDisplay.SwitchView=switch view
 

megamek/i18n/megamek/client/messages_de.properties

@@ -100,21 +100,21 @@ BoardView1.Armor=Panzerung
 BoardView1.Attacker=Angreifer({0}) hex ist {1}.\n
 BoardView1.AttackerPartialCover=Angreifer hat {0} Teilweise Deckung.\n
 BoardView1.CF=, KF: 
-BoardView1.charge=Rammt. Ben�tigt {0}
-BoardView1.charge1=(Rammangriff)
-BoardView1.DFA1=(Todessprung)
+BoardView1.ChargeAttackAction=Rammt. Ben�tigt {0}
+BoardView1.ChargeAttackAction1=(Rammangriff)
+BoardView1.DfaAttackAction1=(Todessprung)
 BoardView1.Command-=Kommando-
 BoardView1.Conventional=Konventionell
 BoardView1.DEPTH=TIEFE 
 BoardView1.detonated=detoniert
-BoardView1.DFA=Todessprung. Ben�tigt {0}
+BoardView1.DfaAttackAction=Todessprung. Ben�tigt {0}
 BoardView1.Heat=\ Hitze 
 BoardView1.HeavySmoke={0} Feld(er) mit dichtem Rauch in der Sichtlinie.\n
 BoardView1.HeavyWoods={0} Feld(er) mit dichtem Wald in der Sichtlinie.\n
 BoardView1.Height=H�he 
 BoardView1.HEIGHT=H\u00D6HE 
 BoardView1.Hex=Hex 
-BoardView1.hit=Trifft mit {0}. Ben�tigt {1} 
+BoardView1.ClubAttackAction=Trifft mit {0}. Ben�tigt {1} 
 BoardView1.ID=\ ID:
 BoardView1.IMMOBILE=IMMOBIL
 BoardView1.internal=; Intern 
@@ -140,11 +140,11 @@ BoardView1.NonMech=Nicht-Mech
 BoardView1.on=auf
 BoardView1.pilot=\ Pilot
 BoardView1.PRONE=LIEGT
-BoardView1.proto=F�hrt Protomech Nahkampfattacke durch. Ben�tigt {0}
+BoardView1.ProtomechPhysicalAttackAction=F�hrt Protomech Nahkampfattacke durch. Ben�tigt {0}
 BoardView1.punchBoth=Schl�gt mit beiden Armen. Linker Arm ben�tigt {0}; Rechter Arm ben�tigt {1}
 BoardView1.punchLeft=Schl�gt mit dem linken Arm. Ben�tigt {0}
 BoardView1.punchRight=Schl�gt mit dem rechten Arm. Ben�tigt {0}
-BoardView1.push=Schubst. Ben�tigt {0}
+BoardView1.PushAttackAction=Schubst. Ben�tigt {0}
 BoardView1.Rubble=Unrat
 BoardView1.Smoke={0} Rauchfeld(er) in der Sichtlinie\n
 BoardView1.STUCK=STECKT

megamek/i18n/megamek/client/messages_es.properties

@@ -381,17 +381,17 @@ BoardView1.ConversionMode.TRACKED=Con orugas
 BoardView1.ConversionMode.WHEELED=Con ruedas
 BoardView1.ConversionMode.WIGE=AirMech
 BoardView1.ConversionMode.AERODYNE=Caza
-BoardView1.charge=Cargas. Necesita {0}
-BoardView1.charge1=(Cargando)
+BoardView1.ChargeAttackAction=Cargas. Necesita {0}
+BoardView1.ChargeAttackAction1=(Cargando)
 BoardView1.CrewDead=EQUIPO MUERTO
-BoardView1.DFA1=(Ejecutando MDC)
+BoardView1.DfaAttackAction1=(Ejecutando MDC)
 BoardView1.Drop=Soltar
 BoardView1.Command-=Comando-
 BoardView1.Command=Comando
 BoardView1.Conventional=Conv (
 BoardView1.DEPTH=PROF. 
 BoardView1.detonated=detonado (
-BoardView1.DFA=MDC. Necesita {0}
+BoardView1.DfaAttackAction=MDC. Necesita {0}
 BoardView1.Disconnect=Desconectar
 BoardView1.ecmSource=Fuente ECM
 BoardView1.eccmSource=Fuente ECCM
@@ -410,7 +410,7 @@ BoardView1.Height=Altura
 BoardView1.HEIGHT=ALTURA 
 BoardView1.Hex=Hex 
 BoardView1.HIDDEN=OCULTO
-BoardView1.hit=Golpes con {0}. Necesita {1} 
+BoardView1.ClubAttackAction=Golpes con {0}. Necesita {1} 
 BoardView1.Hover=Flotar
 BoardView1.ID=\ ID:
 BoardView1.IMMOBILE=INMÓVIL
@@ -454,13 +454,13 @@ BoardView1.on=activado
 BoardView1.pilot=\ Piloto
 BoardView1.PRONE=CAIDO
 BoardView1.NO_GYRO=NO GYRO
-BoardView1.proto=Hace un ataque frenético de protomech. Necesita {0}
+BoardView1.ProtomechPhysicalAttackAction=Hace un ataque frenético de protomech. Necesita {0}
 BoardView1.punchBoth=Golpea con ambos brazos. Izquierdo necesita {0}; Derecho necesita {1}
 BoardView1.punchLeft=Golpea con el brazo izquierdo. Necesita {0}
 BoardView1.punchRight=Golpea con el brazo derecho. Necesita {0}
-BoardView1.push=Empuja. Necesita {0}
+BoardView1.PushAttackAction=Empuja. Necesita {0}
 BoardView1.Rubble=Escombros
-BoardView1.Searchlight=Se ilumina con un reflector.
+BoardView1.SearchlightAttackAction=Se ilumina con un reflector.
 BoardView1.Smoke={0} hex de humo en el campo visual.\n
 BoardView1.STUCK=ATASCADO
 BoardView1.STUNNED=ATURDIDO:{0}

megamek/i18n/megamek/client/messages_ru.properties

@@ -103,17 +103,17 @@ BoardView1.Climb=Забраться наверх
 BoardView1.ClimbOff=Пройти через
 BoardView1.WIGEClimb=Держать высоту
 BoardView1.WIGEClimbOff=Перестать держать высоту
-BoardView1.charge=Таранит. Нужно {0}
-BoardView1.charge1=(Таранит)
+BoardView1.ChargeAttackAction=Таранит. Нужно {0}
+BoardView1.ChargeAttackAction1=(Таранит)
 BoardView1.CrewDead=ЭКИПАЖ МЕРТВ
-BoardView1.DFA1=(Выполняет DFA)
+BoardView1.DfaAttackAction1=(Выполняет DFA)
 BoardView1.Drop=Drop
 BoardView1.Command-=Командование-
 BoardView1.Command=Командование
 BoardView1.Conventional=Обчн 
 BoardView1.DEPTH=ГЛУБИНА 
 BoardView1.detonated=взорваны (
-BoardView1.DFA=DFA. Нужно {0}
+BoardView1.DfaAttackAction=DFA. Нужно {0}
 BoardView1.ecmSource=Источник ECM
 BoardView1.eccmSource=Источник ECCM
 BoardView1.Evade=\ (Уход)
@@ -125,7 +125,7 @@ BoardView1.HeavyWoods={0} гексов густого леса на линии 
 BoardView1.Height=Высота 
 BoardView1.HEIGHT=ВЫСОТА 
 BoardView1.Hex=Гекс 
-BoardView1.hit=Попадание при {0}. Нужно {1} 
+BoardView1.ClubAttackAction=Попадание при {0}. Нужно {1} 
 BoardView1.Hover=Парить
 BoardView1.ID=\ ID:
 BoardView1.IMMOBILE=ОБЕЗДВИЖЕН
@@ -166,13 +166,13 @@ BoardView1.NonMech=не Мех
 BoardView1.on=на
 BoardView1.pilot=\ Пилот
 BoardView1.PRONE=ЛЕЖИТ
-BoardView1.proto=Выполняет яростную атаку протомеха. Нужно {0}
+BoardView1.ProtomechPhysicalAttackAction=Выполняет яростную атаку протомеха. Нужно {0}
 BoardView1.punchBoth=Бьет обеими руками. Левой нужно {0}; Правой нужно {1}
 BoardView1.punchLeft=Бьет левой рукой. Нужно {0}
 BoardView1.punchRight=Бьет правой рукой. Нужно {0}
-BoardView1.push=Толкает. Нужно {0}
+BoardView1.PushAttackAction=Толкает. Нужно {0}
 BoardView1.Rubble=Мусор
-BoardView1.Searchlight=Светит поисковым прожектором.
+BoardView1.SearchlightAttackAction=Светит поисковым прожектором.
 BoardView1.Smoke={0} дымных гекса(ов) на линии обзора.\n
 BoardView1.STUCK=ЗАСТРЯЛ
 BoardView1.STUNNED=ОГЛУШЕН:{0}

megamek/mmconf/defaultKeyBinds.xml

@@ -371,6 +371,13 @@
         <isRepeatable>false</isRepeatable>
     </KeyBind>
 
+    <KeyBind>
+        <command>toggleTurnDetails</command> <!-- Ctrl-P -->
+        <keyCode>84</keyCode>
+        <modifier>128</modifier>
+        <isRepeatable>false</isRepeatable>
+    </KeyBind>
+
     <KeyBind>
          <command>clientSettings</command> <!-- Alt-C -->
         <keyCode>67</keyCode>

megamek/src/megamek/client/ui/swing/ActionPhaseDisplay.java

@@ -23,6 +23,7 @@
 import megamek.client.ui.swing.util.UIUtil;
 import megamek.client.ui.swing.widget.MegamekButton;
 import megamek.client.ui.swing.widget.SkinSpecification;
+import megamek.common.annotations.Nullable;
 import megamek.common.preference.PreferenceChangeEvent;
 
 import javax.swing.*;
@@ -135,7 +136,8 @@ protected boolean needNagForNoAction() {
      * @param skipButtonLabel
      * @param isDoingAction true if user has entered actions for this turn, false if not.
      */
-    protected void updateDonePanelButtons(String doneButtonLabel, String skipButtonLabel, boolean isDoingAction) {
+    protected void updateDonePanelButtons(final String doneButtonLabel, final String skipButtonLabel, final boolean isDoingAction,
+                                          @Nullable java.util.List<String> turnDetails) {
         this.isDoingAction = isDoingAction;
         if (GUIP.getNagForNoAction()) {
             butDone.setText("<html><b>" + doneButtonLabel + "</b></html>");
@@ -161,5 +163,7 @@ protected void updateDonePanelButtons(String doneButtonLabel, String skipButtonL
             butDone.setEnabled(!GUIP.getNagForNoAction());
             butSkipTurn.setEnabled(true);
         }
+
+        clientgui.getBoardView().turnDetailsOverlay.setLines(turnDetails);
     }
 }

megamek/src/megamek/client/ui/swing/AttackPhaseDisplay.java

@@ -18,6 +18,7 @@
  */
 package megamek.client.ui.swing;
 
+import megamek.client.ui.swing.tooltip.EntityActionLog;
 import megamek.common.actions.*;
 
 import java.util.*;
@@ -26,10 +27,11 @@
 
 public abstract class AttackPhaseDisplay extends ActionPhaseDisplay {
     // client list of attacks user has input
-    protected Vector<EntityAction> attacks;
+    protected EntityActionLog attacks;
 
     protected AttackPhaseDisplay(ClientGUI cg) {
         super(cg);
+        attacks = new EntityActionLog(clientgui.getClient());
     }
 
     /**
@@ -52,9 +54,9 @@ protected void updateDonePanel()
     {
         if (attacks.isEmpty() || (attacks.size() == 1 && attacks.firstElement() instanceof TorsoTwistAction)){
             // a torso twist alone should not trigger Done button
-            updateDonePanelButtons(getDoneButtonLabel(), getSkipTurnButtonLabel(), false);
+            updateDonePanelButtons(getDoneButtonLabel(), getSkipTurnButtonLabel(), false, null);
         } else {
-            updateDonePanelButtons(getDoneButtonLabel(), getSkipTurnButtonLabel(), true);
+            updateDonePanelButtons(getDoneButtonLabel(), getSkipTurnButtonLabel(), true, attacks.getDescriptions());
         }
     }
 
@@ -67,7 +69,7 @@ protected void removeAttack(Object o)
     /** removes all elements from the local temporary attack list */
     protected void removeAllAttacks()
     {
-        attacks.removeAllElements();
+        attacks.clear();
         updateDonePanel();
     }
 

megamek/src/megamek/client/ui/swing/ClientGUI.java

@@ -162,6 +162,7 @@ public class ClientGUI extends JPanel implements BoardViewListener,
     public static final String VIEW_TOGGLE_FOV_HIGHLIGHT = "viewToggleFovHighlight";
     public static final String VIEW_TOGGLE_FIRING_SOLUTIONS = "viewToggleFiringSolutions";
     public static final String VIEW_MOVE_ENV = "viewMovementEnvelope";
+    public static final String VIEW_TURN_DETAILS_OVERLAY = "viewTurnDetailsOverlay";
     public static final String VIEW_MOVE_MOD_ENV = "viewMovModEnvelope";
     public static final String VIEW_CHANGE_THEME = "viewChangeTheme";
     public static final String VIEW_ROUND_REPORT = "viewRoundReport";
@@ -963,6 +964,11 @@ public void actionPerformed(ActionEvent event) {
                     ((MovementDisplay) curPanel).computeMovementEnvelope(getUnitDisplay().getCurrentEntity());
                 }
                 break;
+            case VIEW_TURN_DETAILS_OVERLAY:
+                if (curPanel instanceof ActionPhaseDisplay) {
+                    GUIP.setTurnDetailsOverlay(!GUIP.getTurnDetailsOverlay());
+                }
+                break;
             case VIEW_MOVE_MOD_ENV:
                 if (curPanel instanceof MovementDisplay) {
                     ((MovementDisplay) curPanel).computeModifierEnvelope();