Updated kernel sources for Dior #30

Stane1983 · 2015-09-28T14:18:20Z

Can you push updated kernel sources for dior?

git-rbanerjee · 2015-10-25T04:55:56Z

No

sarvesvara · 2016-03-06T12:19:19Z

Already published.

chenyuwen · 2016-03-14T05:11:01Z

I build the REDMI NOTE LTE kernel , but wifi, usb and Fuel Gauge did not work in my phone.

demonguy · 2016-03-14T07:31:30Z

Wifi driver is not in the repo, because it's opensourced.
Please refer to wiki

[ Upstream commit ecf5fc6 ] Nikolay has reported a hang when a memcg reclaim got stuck with the following backtrace: PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync" #0 __schedule at ffffffff815ab152 #1 schedule at ffffffff815ab76e #2 schedule_timeout at ffffffff815ae5e5 MiCode#3 io_schedule_timeout at ffffffff815aad6a MiCode#4 bit_wait_io at ffffffff815abfc6 MiCode#5 __wait_on_bit at ffffffff815abda5 MiCode#6 wait_on_page_bit at ffffffff8111fd4f MiCode#7 shrink_page_list at ffffffff81135445 MiCode#8 shrink_inactive_list at ffffffff81135845 MiCode#9 shrink_lruvec at ffffffff81135ead MiCode#10 shrink_zone at ffffffff811360c3 MiCode#11 shrink_zones at ffffffff81136eff MiCode#12 do_try_to_free_pages at ffffffff8113712f MiCode#13 try_to_free_mem_cgroup_pages at ffffffff811372be MiCode#14 try_charge at ffffffff81189423 MiCode#15 mem_cgroup_try_charge at ffffffff8118c6f5 MiCode#16 __add_to_page_cache_locked at ffffffff8112137d MiCode#17 add_to_page_cache_lru at ffffffff81121618 MiCode#18 pagecache_get_page at ffffffff8112170b MiCode#19 grow_dev_page at ffffffff811c8297 MiCode#20 __getblk_slow at ffffffff811c91d6 MiCode#21 __getblk_gfp at ffffffff811c92c1 MiCode#22 ext4_ext_grow_indepth at ffffffff8124565c MiCode#23 ext4_ext_create_new_leaf at ffffffff81246ca8 MiCode#24 ext4_ext_insert_extent at ffffffff81246f09 MiCode#25 ext4_ext_map_blocks at ffffffff8124a848 MiCode#26 ext4_map_blocks at ffffffff8121a5b7 MiCode#27 mpage_map_one_extent at ffffffff8121b1fa MiCode#28 mpage_map_and_submit_extent at ffffffff8121f07b MiCode#29 ext4_writepages at ffffffff8121f6d5 MiCode#30 do_writepages at ffffffff8112c490 MiCode#31 __filemap_fdatawrite_range at ffffffff81120199 MiCode#32 filemap_flush at ffffffff8112041c MiCode#33 ext4_alloc_da_blocks at ffffffff81219da1 MiCode#34 ext4_rename at ffffffff81229b91 MiCode#35 ext4_rename2 at ffffffff81229e32 MiCode#36 vfs_rename at ffffffff811a08a5 MiCode#37 SYSC_renameat2 at ffffffff811a3ffc MiCode#38 sys_renameat2 at ffffffff811a408e MiCode#39 sys_rename at ffffffff8119e51e MiCode#40 system_call_fastpath at ffffffff815afa89 Dave Chinner has properly pointed out that this is a deadlock in the reclaim code because ext4 doesn't submit pages which are marked by PG_writeback right away. The heuristic was introduced by commit e62e384 ("memcg: prevent OOM with too many dirty pages") and it was applied only when may_enter_fs was specified. The code has been changed by c3b94f4 ("memcg: further prevent OOM with too many dirty pages") which has removed the __GFP_FS restriction with a reasoning that we do not get into the fs code. But this is not sufficient apparently because the fs doesn't necessarily submit pages marked PG_writeback for IO right away. ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily submit the bio. Instead it tries to map more pages into the bio and mpage_map_one_extent might trigger memcg charge which might end up waiting on a page which is marked PG_writeback but hasn't been submitted yet so we would end up waiting for something that never finishes. Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2) before we go to wait on the writeback. The page fault path, which is the only path that triggers memcg oom killer since 3.12, shouldn't require GFP_NOFS and so we shouldn't reintroduce the premature OOM killer issue which was originally addressed by the heuristic. As per David Chinner the xfs is doing similar thing since 2.6.15 already so ext4 is not the only affected filesystem. Moreover he notes: : For example: IO completion might require unwritten extent conversion : which executes filesystem transactions and GFP_NOFS allocations. The : writeback flag on the pages can not be cleared until unwritten : extent conversion completes. Hence memory reclaim cannot wait on : page writeback to complete in GFP_NOFS context because it is not : safe to do so, memcg reclaim or otherwise. Cc: stable@vger.kernel.org # 3.9+ [tytso@mit.edu: corrected the control flow] Fixes: c3b94f4 ("memcg: further prevent OOM with too many dirty pages") Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

generic/361 reports below warning, this is because: once, there is someone entering into critical region of sbi.cp_lock, if write_end_io. f2fs_stop_checkpoint is invoked from an triggered IRQ, we will encounter deadlock. So this patch changes to use spin_{,un}lock_irq{save,restore} to create critical region without IRQ enabled to avoid potential deadlock. irq event stamp: 83391573 loop: Write error at byte offset 438729728, length 1024. hardirqs last enabled at (83391573): [<c1809752>] restore_all+0xf/0x65 hardirqs last disabled at (83391572): [<c1809eac>] reschedule_interrupt+0x30/0x3c loop: Write error at byte offset 438860288, length 1536. softirqs last enabled at (83389244): [<c180cc4e>] __do_softirq+0x1ae/0x476 softirqs last disabled at (83389237): [<c101ca7c>] do_softirq_own_stack+0x2c/0x40 loop: Write error at byte offset 438990848, length 2048. ================================ WARNING: inconsistent lock state 4.12.0-rc2+ MiCode#30 Tainted: G O -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. xfs_io/7959 [HC1[1]:SC0[0]:HE0:SE1] takes: (&(&sbi->cp_lock)->rlock){?.+...}, at: [<f96f96cc>] f2fs_stop_checkpoint+0x1c/0x50 [f2fs] {HARDIRQ-ON-W} state was registered at: __lock_acquire+0x527/0x7b0 lock_acquire+0xae/0x220 _raw_spin_lock+0x42/0x50 do_checkpoint+0x165/0x9e0 [f2fs] write_checkpoint+0x33f/0x740 [f2fs] __f2fs_sync_fs+0x92/0x1f0 [f2fs] f2fs_sync_fs+0x12/0x20 [f2fs] sync_filesystem+0x67/0x80 generic_shutdown_super+0x27/0x100 kill_block_super+0x22/0x50 kill_f2fs_super+0x3a/0x40 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x69/0x80 exit_to_usermode_loop+0x57/0x85 do_fast_syscall_32+0x18c/0x1b0 entry_SYSENTER_32+0x4c/0x7b irq event stamp: 1957420 hardirqs last enabled at (1957419): [<c1808f37>] _raw_spin_unlock_irq+0x27/0x50 hardirqs last disabled at (1957420): [<c1809f9c>] call_function_single_interrupt+0x30/0x3c softirqs last enabled at (1953784): [<c180cc4e>] __do_softirq+0x1ae/0x476 softirqs last disabled at (1953773): [<c101ca7c>] do_softirq_own_stack+0x2c/0x40 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&sbi->cp_lock)->rlock); <Interrupt> lock(&(&sbi->cp_lock)->rlock); *** DEADLOCK *** 2 locks held by xfs_io/7959: #0: (sb_writers#13){.+.+.+}, at: [<c11fd7ca>] vfs_write+0x16a/0x190 #1: (&sb->s_type->i_mutex_key#16){+.+.+.}, at: [<f96e33f5>] f2fs_file_write_iter+0x25/0x140 [f2fs] stack backtrace: CPU: 2 PID: 7959 Comm: xfs_io Tainted: G O 4.12.0-rc2+ MiCode#30 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack+0x5f/0x92 print_usage_bug+0x1d3/0x1dd ? check_usage_backwards+0xe0/0xe0 mark_lock+0x23d/0x280 __lock_acquire+0x699/0x7b0 ? __this_cpu_preempt_check+0xf/0x20 ? trace_hardirqs_off_caller+0x91/0xe0 lock_acquire+0xae/0x220 ? f2fs_stop_checkpoint+0x1c/0x50 [f2fs] _raw_spin_lock+0x42/0x50 ? f2fs_stop_checkpoint+0x1c/0x50 [f2fs] f2fs_stop_checkpoint+0x1c/0x50 [f2fs] f2fs_write_end_io+0x147/0x150 [f2fs] bio_endio+0x7a/0x1e0 blk_update_request+0xad/0x410 blk_mq_end_request+0x16/0x60 lo_complete_rq+0x3c/0x70 __blk_mq_complete_request_remote+0x11/0x20 flush_smp_call_function_queue+0x6d/0x120 ? debug_smp_processor_id+0x12/0x20 generic_smp_call_function_single_interrupt+0x12/0x30 smp_call_function_single_interrupt+0x25/0x40 call_function_single_interrupt+0x37/0x3c EIP: _raw_spin_unlock_irq+0x2d/0x50 EFLAGS: 00000296 CPU: 2 EAX: 00000001 EBX: d2ccc51c ECX: 00000001 EDX: c1aacebd ESI: 00000000 EDI: 00000000 EBP: c96c9d1c ESP: c96c9d18 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 ? inherit_task_group.isra.98.part.99+0x6b/0xb0 __add_to_page_cache_locked+0x1d4/0x290 add_to_page_cache_lru+0x38/0xb0 pagecache_get_page+0x8e/0x200 f2fs_write_begin+0x96/0xf00 [f2fs] ? trace_hardirqs_on_caller+0xdd/0x1c0 ? current_time+0x17/0x50 ? trace_hardirqs_on+0xb/0x10 generic_perform_write+0xa9/0x170 __generic_file_write_iter+0x1a2/0x1f0 ? f2fs_preallocate_blocks+0x137/0x160 [f2fs] f2fs_file_write_iter+0x6e/0x140 [f2fs] ? __lock_acquire+0x429/0x7b0 __vfs_write+0xc1/0x140 vfs_write+0x9b/0x190 SyS_pwrite64+0x63/0xa0 do_fast_syscall_32+0xa1/0x1b0 entry_SYSENTER_32+0x4c/0x7b EIP: 0xb7786c61 EFLAGS: 00000293 CPU: 2 EAX: ffffffda EBX: 00000003 ECX: 08416000 EDX: 00001000 ESI: 18b24000 EDI: 00000000 EBP: 00000003 ESP: bf9b36b0 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b Fixes: aaec2b1 ("f2fs: introduce cp_lock to protect updating of ckpt_flags") Cc: stable@vger.kernel.org Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

@MSF-Jarvis

commit ecf5fc6 upstream. Nikolay has reported a hang when a memcg reclaim got stuck with the following backtrace: PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync" #0 __schedule at ffffffff815ab152 premaca#1 schedule at ffffffff815ab76e premaca#2 schedule_timeout at ffffffff815ae5e5 MiCode#3 io_schedule_timeout at ffffffff815aad6a MiCode#4 bit_wait_io at ffffffff815abfc6 MiCode#5 __wait_on_bit at ffffffff815abda5 MiCode#6 wait_on_page_bit at ffffffff8111fd4f MiCode#7 shrink_page_list at ffffffff81135445 MiCode#8 shrink_inactive_list at ffffffff81135845 MiCode#9 shrink_lruvec at ffffffff81135ead MiCode#10 shrink_zone at ffffffff811360c3 MiCode#11 shrink_zones at ffffffff81136eff MiCode#12 do_try_to_free_pages at ffffffff8113712f MiCode#13 try_to_free_mem_cgroup_pages at ffffffff811372be MiCode#14 try_charge at ffffffff81189423 MiCode#15 mem_cgroup_try_charge at ffffffff8118c6f5 MiCode#16 __add_to_page_cache_locked at ffffffff8112137d MiCode#17 add_to_page_cache_lru at ffffffff81121618 MiCode#18 pagecache_get_page at ffffffff8112170b MiCode#19 grow_dev_page at ffffffff811c8297 MiCode#20 __getblk_slow at ffffffff811c91d6 MiCode#21 __getblk_gfp at ffffffff811c92c1 MiCode#22 ext4_ext_grow_indepth at ffffffff8124565c MiCode#23 ext4_ext_create_new_leaf at ffffffff81246ca8 MiCode#24 ext4_ext_insert_extent at ffffffff81246f09 MiCode#25 ext4_ext_map_blocks at ffffffff8124a848 MiCode#26 ext4_map_blocks at ffffffff8121a5b7 MiCode#27 mpage_map_one_extent at ffffffff8121b1fa MiCode#28 mpage_map_and_submit_extent at ffffffff8121f07b MiCode#29 ext4_writepages at ffffffff8121f6d5 MiCode#30 do_writepages at ffffffff8112c490 MiCode#31 __filemap_fdatawrite_range at ffffffff81120199 MiCode#32 filemap_flush at ffffffff8112041c MiCode#33 ext4_alloc_da_blocks at ffffffff81219da1 MiCode#34 ext4_rename at ffffffff81229b91 MiCode#35 ext4_rename2 at ffffffff81229e32 MiCode#36 vfs_rename at ffffffff811a08a5 MiCode#37 SYSC_renameat2 at ffffffff811a3ffc MiCode#38 sys_renameat2 at ffffffff811a408e MiCode#39 sys_rename at ffffffff8119e51e MiCode#40 system_call_fastpath at ffffffff815afa89 Dave Chinner has properly pointed out that this is a deadlock in the reclaim code because ext4 doesn't submit pages which are marked by PG_writeback right away. The heuristic was introduced by commit e62e384 ("memcg: prevent OOM with too many dirty pages") and it was applied only when may_enter_fs was specified. The code has been changed by c3b94f4 ("memcg: further prevent OOM with too many dirty pages") which has removed the __GFP_FS restriction with a reasoning that we do not get into the fs code. But this is not sufficient apparently because the fs doesn't necessarily submit pages marked PG_writeback for IO right away. ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily submit the bio. Instead it tries to map more pages into the bio and mpage_map_one_extent might trigger memcg charge which might end up waiting on a page which is marked PG_writeback but hasn't been submitted yet so we would end up waiting for something that never finishes. Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2) before we go to wait on the writeback. The page fault path, which is the only path that triggers memcg oom killer since 3.12, shouldn't require GFP_NOFS and so we shouldn't reintroduce the premature OOM killer issue which was originally addressed by the heuristic. As per David Chinner the xfs is doing similar thing since 2.6.15 already so ext4 is not the only affected filesystem. Moreover he notes: : For example: IO completion might require unwritten extent conversion : which executes filesystem transactions and GFP_NOFS allocations. The : writeback flag on the pages can not be cleared until unwritten : extent conversion completes. Hence memory reclaim cannot wait on : page writeback to complete in GFP_NOFS context because it is not : safe to do so, memcg reclaim or otherwise. [tytso@mit.edu: corrected the control flow] Fixes: c3b94f4 ("memcg: further prevent OOM with too many dirty pages") Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [@MSF-Jarvis: Fix conflicts from "mm: vmscan: stall page reclaim after a list of pages have been processed" ] Change-Id: I09aa7c565388b4b323034d5c71a463f4fb175462

[ Upstream commit a8d7aa1 ] syzbot reported a crash in tasklet_action_common() caused by dccp. dccp needs to make sure socket wont disappear before tasklet handler has completed. This patch takes a reference on the socket when arming the tasklet, and moves the sock_put() from dccp_write_xmit_timer() to dccp_write_xmitlet() kernel BUG at kernel/softirq.c:514! invalid opcode: 0000 [MiCode#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17 Comm: ksoftirqd/1 Not tainted 4.17.0-rc3+ MiCode#30 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: 0018:ffff8801d9b3faf8 EFLAGS: 00010246 dccp_close: ABORT with 65423 bytes unread RAX: 1ffff1003b367f6b RBX: ffff8801daf1f3f0 RCX: 0000000000000000 RDX: ffff8801cf895498 RSI: 0000000000000004 RDI: 0000000000000000 RBP: ffff8801d9b3fc40 R08: ffffed0039f12a95 R09: ffffed0039f12a94 dccp_close: ABORT with 65423 bytes unread R10: ffffed0039f12a94 R11: ffff8801cf8954a3 R12: 0000000000000000 R13: ffff8801d9b3fc18 R14: dffffc0000000000 R15: ffff8801cf895490 FS: 0000000000000000(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2bc28000 CR3: 00000001a08a9000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tasklet_action+0x1d/0x20 kernel/softirq.c:533 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285 dccp_close: ABORT with 65423 bytes unread run_ksoftirqd+0x86/0x100 kernel/softirq.c:646 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164 kthread+0x345/0x410 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 Code: 48 8b 85 e8 fe ff ff 48 8b 95 f0 fe ff ff e9 94 fb ff ff 48 89 95 f0 fe ff ff e8 81 53 6e 00 48 8b 95 f0 fe ff ff e9 62 fb ff ff <0f> 0b 48 89 cf 48 89 8d e8 fe ff ff e8 64 53 6e 00 48 8b 8d e8 RIP: tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: ffff8801d9b3faf8 Fixes: dc841e3 ("dccp: Extend CCID packet dequeueing interface") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: dccp@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6d37fa4 ] In l2tp code, if it is a L2TP_UDP_ENCAP tunnel, tunnel->sk points to a UDP socket. User could call sendmsg() on both this tunnel and the UDP socket itself concurrently. As l2tp_xmit_skb() holds socket lock and call __sk_dst_check() to refresh sk->sk_dst_cache, while udpv6_sendmsg() is lockless and call sk_dst_check() to refresh sk->sk_dst_cache, there could be a race and cause the dst cache to be freed multiple times. So we fix l2tp side code to always call sk_dst_check() to garantee xchg() is called when refreshing sk->sk_dst_cache to avoid race conditions. Syzkaller reported stack trace: BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] BUG: KASAN: use-after-free in atomic_fetch_add_unless include/linux/atomic.h:575 [inline] BUG: KASAN: use-after-free in atomic_add_unless include/linux/atomic.h:597 [inline] BUG: KASAN: use-after-free in dst_hold_safe include/net/dst.h:308 [inline] BUG: KASAN: use-after-free in ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029 Read of size 4 at addr ffff8801aea9a880 by task syz-executor129/4829 CPU: 0 PID: 4829 Comm: syz-executor129 Not tainted 4.18.0-rc7-next-20180802+ MiCode#30 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x30d mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272 atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] atomic_fetch_add_unless include/linux/atomic.h:575 [inline] atomic_add_unless include/linux/atomic.h:597 [inline] dst_hold_safe include/net/dst.h:308 [inline] ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029 rt6_get_pcpu_route net/ipv6/route.c:1249 [inline] ip6_pol_route+0x354/0xd20 net/ipv6/route.c:1922 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2098 fib6_rule_lookup+0x283/0x890 net/ipv6/fib6_rules.c:122 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2126 ip6_dst_lookup_tail+0x1278/0x1da0 net/ipv6/ip6_output.c:978 ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1079 ip6_sk_dst_lookup_flow+0x5ed/0xc50 net/ipv6/ip6_output.c:1117 udpv6_sendmsg+0x2163/0x36b0 net/ipv6/udp.c:1354 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x51d/0x930 net/socket.c:2115 __sys_sendmmsg+0x240/0x6f0 net/socket.c:2210 __do_sys_sendmmsg net/socket.c:2239 [inline] __se_sys_sendmmsg net/socket.c:2236 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2236 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446a29 Code: e8 ac b8 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f4de5532db8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000006dcc38 RCX: 0000000000446a29 RDX: 00000000000000b8 RSI: 0000000020001b00 RDI: 0000000000000003 RBP: 00000000006dcc30 R08: 00007f4de5533700 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dcc3c R13: 00007ffe2b830fdf R14: 00007f4de55339c0 R15: 0000000000000001 Fixes: 71b1391 ("l2tp: ensure sk->dst is still valid") Reported-by: syzbot+05f840f3b04f211bad55@syzkaller.appspotmail.com Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: David Ahern <dsahern@gmail.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a8d7aa1 ] syzbot reported a crash in tasklet_action_common() caused by dccp. dccp needs to make sure socket wont disappear before tasklet handler has completed. This patch takes a reference on the socket when arming the tasklet, and moves the sock_put() from dccp_write_xmit_timer() to dccp_write_xmitlet() kernel BUG at kernel/softirq.c:514! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17 Comm: ksoftirqd/1 Not tainted 4.17.0-rc3+ MiCode#30 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: 0018:ffff8801d9b3faf8 EFLAGS: 00010246 dccp_close: ABORT with 65423 bytes unread RAX: 1ffff1003b367f6b RBX: ffff8801daf1f3f0 RCX: 0000000000000000 RDX: ffff8801cf895498 RSI: 0000000000000004 RDI: 0000000000000000 RBP: ffff8801d9b3fc40 R08: ffffed0039f12a95 R09: ffffed0039f12a94 dccp_close: ABORT with 65423 bytes unread R10: ffffed0039f12a94 R11: ffff8801cf8954a3 R12: 0000000000000000 R13: ffff8801d9b3fc18 R14: dffffc0000000000 R15: ffff8801cf895490 FS: 0000000000000000(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2bc28000 CR3: 00000001a08a9000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tasklet_action+0x1d/0x20 kernel/softirq.c:533 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285 dccp_close: ABORT with 65423 bytes unread run_ksoftirqd+0x86/0x100 kernel/softirq.c:646 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164 kthread+0x345/0x410 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 Code: 48 8b 85 e8 fe ff ff 48 8b 95 f0 fe ff ff e9 94 fb ff ff 48 89 95 f0 fe ff ff e8 81 53 6e 00 48 8b 95 f0 fe ff ff e9 62 fb ff ff <0f> 0b 48 89 cf 48 89 8d e8 fe ff ff e8 64 53 6e 00 48 8b 8d e8 RIP: tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: ffff8801d9b3faf8 Fixes: dc841e3 ("dccp: Extend CCID packet dequeueing interface") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: dccp@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…nable() [ Upstream commit 898bc40 ] Fix au0828_analog_stream_enable() to check if device is in the right state first. When unbind happens while bind is in progress, usbdev pointer could be invalid in au0828_analog_stream_enable() and a call to usb_ifnum_to_if() will result in the null pointer dereference. This problem is found with the new media_dev_allocator.sh test. kernel: [ 590.359623] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e8 kernel: [ 590.359627] #PF error: [normal kernel read fault] kernel: [ 590.359629] PGD 0 P4D 0 kernel: [ 590.359632] Oops: 0000 [MiCode#1] SMP PTI kernel: [ 590.359634] CPU: 3 PID: 1458 Comm: v4l_id Not tainted 5.1.0-rc2+ MiCode#30 kernel: [ 590.359636] Hardware name: Dell Inc. OptiPlex 7 90/0HY9JP, BIOS A18 09/24/2013 kernel: [ 590.359641] RIP: 0010:usb_ifnum_to_if+0x6/0x60 kernel: [ 590.359643] Code: 5d 41 5e 41 5f 5d c3 48 83 c4 10 b8 fa ff ff ff 5b 41 5c 41 5d 41 5e 41 5f 5d c3 b8 fa ff ff ff c3 0f 1f 00 6 6 66 66 66 90 55 <48> 8b 97 e8 04 00 00 48 89 e5 48 85 d2 74 41 0f b6 4a 04 84 c 9 74 kernel: [ 590.359645] RSP: 0018:ffffad3cc3c1fc00 EFLAGS: 00010246 kernel: [ 590.359646] RAX: 0000000000000000 RBX: ffff8ded b1f3c000 RCX: 1f377e4500000000 kernel: [ 590.359648] RDX: ffff8dedfa3a6b50 RSI: 00000000 00000000 RDI: 0000000000000000 kernel: [ 590.359649] RBP: ffffad3cc3c1fc28 R08: 00000000 8574acc2 R09: ffff8dedfa3a6b50 kernel: [ 590.359650] R10: 0000000000000001 R11: 00000000 00000000 R12: 0000000000000000 kernel: [ 590.359652] R13: ffff8dedb1f3f0f0 R14: ffffffff adcf7ec0 R15: 0000000000000000 kernel: [ 590.359654] FS: 00007f7917198540(0000) GS:ffff 8dee258c0000(0000) knlGS:0000000000000000 kernel: [ 590.359655] CS: 0010 DS: 0000 ES: 0000 CR0: 00 00000080050033 kernel: [ 590.359657] CR2: 00000000000004e8 CR3: 00000001 a388e002 CR4: 00000000000606e0 kernel: [ 590.359658] Call Trace: kernel: [ 590.359664] ? au0828_analog_stream_enable+0x2c/0x180 kernel: [ 590.359666] au0828_v4l2_open+0xa4/0x110 kernel: [ 590.359670] v4l2_open+0x8b/0x120 kernel: [ 590.359674] chrdev_open+0xa6/0x1c0 kernel: [ 590.359676] ? cdev_put.part.3+0x20/0x20 kernel: [ 590.359678] do_dentry_open+0x1f6/0x360 kernel: [ 590.359681] vfs_open+0x2f/0x40 kernel: [ 590.359684] path_openat+0x299/0xc20 kernel: [ 590.359688] do_filp_open+0x9b/0x110 kernel: [ 590.359695] ? _raw_spin_unlock+0x27/0x40 kernel: [ 590.359697] ? __alloc_fd+0xb2/0x160 kernel: [ 590.359700] do_sys_open+0x1ba/0x260 kernel: [ 590.359702] ? do_sys_open+0x1ba/0x260 kernel: [ 590.359712] __x64_sys_openat+0x20/0x30 kernel: [ 590.359715] do_syscall_64+0x5a/0x120 kernel: [ 590.359718] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 719c7d5 ] BUG: KASAN: use-after-free in ip_vs_in.part.29+0xe8/0xd20 [ip_vs] Read of size 4 at addr ffff8881e9b26e2c by task sshd/5603 CPU: 0 PID: 5603 Comm: sshd Not tainted 4.19.39+ MiCode#30 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x270 kasan_report+0x179/0x2c0 ip_vs_in.part.29+0xe8/0xd20 [ip_vs] ip_vs_in+0xd8/0x170 [ip_vs] nf_hook_slow+0x5f/0xe0 __ip_local_out+0x1d5/0x250 ip_local_out+0x19/0x60 __tcp_transmit_skb+0xba1/0x14f0 tcp_write_xmit+0x41f/0x1ed0 ? _copy_from_iter_full+0xca/0x340 __tcp_push_pending_frames+0x52/0x140 tcp_sendmsg_locked+0x787/0x1600 ? tcp_sendpage+0x60/0x60 ? inet_sk_set_state+0xb0/0xb0 tcp_sendmsg+0x27/0x40 sock_sendmsg+0x6d/0x80 sock_write_iter+0x121/0x1c0 ? sock_sendmsg+0x80/0x80 __vfs_write+0x23e/0x370 vfs_write+0xe7/0x230 ksys_write+0xa1/0x120 ? __ia32_sys_read+0x50/0x50 ? __audit_syscall_exit+0x3ce/0x450 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7ff6f6147c60 Code: 73 01 c3 48 8b 0d 28 12 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 5d 73 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 RSP: 002b:00007ffd772ead18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000034 RCX: 00007ff6f6147c60 RDX: 0000000000000034 RSI: 000055df30a31270 RDI: 0000000000000003 RBP: 000055df30a31270 R08: 0000000000000000 R09: 0000000000000000 R10: 00007ffd772ead70 R11: 0000000000000246 R12: 00007ffd772ead74 R13: 00007ffd772eae20 R14: 00007ffd772eae24 R15: 000055df2f12ddc0 Allocated by task 6052: kasan_kmalloc+0xa0/0xd0 __kmalloc+0x10a/0x220 ops_init+0x97/0x190 register_pernet_operations+0x1ac/0x360 register_pernet_subsys+0x24/0x40 0xffffffffc0ea016d do_one_initcall+0x8b/0x253 do_init_module+0xe3/0x335 load_module+0x2fc0/0x3890 __do_sys_finit_module+0x192/0x1c0 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 6067: __kasan_slab_free+0x130/0x180 kfree+0x90/0x1a0 ops_free_list.part.7+0xa6/0xc0 unregister_pernet_operations+0x18b/0x1f0 unregister_pernet_subsys+0x1d/0x30 ip_vs_cleanup+0x1d/0xd2f [ip_vs] __x64_sys_delete_module+0x20c/0x300 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8881e9b26600 which belongs to the cache kmalloc-4096 of size 4096 The buggy address is located 2092 bytes inside of 4096-byte region [ffff8881e9b26600, ffff8881e9b27600) The buggy address belongs to the page: page:ffffea0007a6c800 count:1 mapcount:0 mapping:ffff888107c0e600 index:0x0 compound_mapcount: 0 flags: 0x17ffffc0008100(slab|head) raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff888107c0e600 raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected while unregistering ipvs module, ops_free_list calls __ip_vs_cleanup, then nf_unregister_net_hooks be called to do remove nf hook entries. It need a RCU period to finish, however net->ipvs is set to NULL immediately, which will trigger NULL pointer dereference when a packet is hooked and handled by ip_vs_in where net->ipvs is dereferenced. Another scene is ops_free_list call ops_free to free the net_generic directly while __ip_vs_cleanup finished, then calling ip_vs_in will triggers use-after-free. This patch moves nf_unregister_net_hooks from __ip_vs_cleanup() to __ip_vs_dev_cleanup(), where rcu_barrier() is called by unregister_pernet_device -> unregister_pernet_operations, that will do the needed grace period. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: efe4160 ("ipvs: convert to use pernet nf_hook api") Suggested-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 98397fc upstream. Original implementation commit e54bcde ("arm64: eBPF JIT compiler") had the relevant code paths, but due to an oversight always fail jiting. As a result, we had been falling back to BPF interpreter whenever a BPF program has JMP_JSET_{X,K} instructions. With this fix, we confirm that the corresponding tests in lib/test_bpf continue to pass, and also jited. ... [ 2.784553] test_bpf: MiCode#30 JSET jited:1 188 192 197 PASS [ 2.791373] test_bpf: MiCode#31 tcpdump port 22 jited:1 325 677 625 PASS [ 2.808800] test_bpf: MiCode#32 tcpdump complex jited:1 323 731 991 PASS ... [ 3.190759] test_bpf: MiCode#237 JMP_JSET_K: if (0x3 & 0x2) return 1 jited:1 110 PASS [ 3.192524] test_bpf: MiCode#238 JMP_JSET_K: if (0x3 & 0xffffffff) return 1 jited:1 98 PASS [ 3.211014] test_bpf: MiCode#249 JMP_JSET_X: if (0x3 & 0x2) return 1 jited:1 120 PASS [ 3.212973] test_bpf: MiCode#250 JMP_JSET_X: if (0x3 & 0xffffffff) return 1 jited:1 89 PASS ... Fixes: e54bcde ("arm64: eBPF JIT compiler") Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 83f3522 ] fib_trie_unmerge() is called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB alias list in a leaf is traversed with hlist_for_each_entry_rcu(). Since the function is always called with RTNL held and since modification of the list is protected by RTNL, simply use hlist_for_each_entry() and silence the warning. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b MiCode#30 Not tainted ----------------------------- net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/164: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b MiCode#30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d fib_trie_unmerge+0x608/0xdb0 fib_unmerge+0x44/0x360 fib4_rule_configure+0xc8/0xad0 fib_nl_newrule+0x37a/0x1dd0 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc80a234e97 Code: Bad RIP value. RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97 RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003 RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000 R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020 Fixes: 0ddcf43 ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 MiCode#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 MiCode#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 MiCode#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 MiCode#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 MiCode#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 MiCode#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 MiCode#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 MiCode#32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 MiCode#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 MiCode#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 MiCode#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 MiCode#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 MiCode#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 MiCode#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 MiCode#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 MiCode#32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 MiCode#33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 719c7d5 ] BUG: KASAN: use-after-free in ip_vs_in.part.29+0xe8/0xd20 [ip_vs] Read of size 4 at addr ffff8881e9b26e2c by task sshd/5603 CPU: 0 PID: 5603 Comm: sshd Not tainted 4.19.39+ MiCode#30 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x270 kasan_report+0x179/0x2c0 ip_vs_in.part.29+0xe8/0xd20 [ip_vs] ip_vs_in+0xd8/0x170 [ip_vs] nf_hook_slow+0x5f/0xe0 __ip_local_out+0x1d5/0x250 ip_local_out+0x19/0x60 __tcp_transmit_skb+0xba1/0x14f0 tcp_write_xmit+0x41f/0x1ed0 ? _copy_from_iter_full+0xca/0x340 __tcp_push_pending_frames+0x52/0x140 tcp_sendmsg_locked+0x787/0x1600 ? tcp_sendpage+0x60/0x60 ? inet_sk_set_state+0xb0/0xb0 tcp_sendmsg+0x27/0x40 sock_sendmsg+0x6d/0x80 sock_write_iter+0x121/0x1c0 ? sock_sendmsg+0x80/0x80 __vfs_write+0x23e/0x370 vfs_write+0xe7/0x230 ksys_write+0xa1/0x120 ? __ia32_sys_read+0x50/0x50 ? __audit_syscall_exit+0x3ce/0x450 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7ff6f6147c60 Code: 73 01 c3 48 8b 0d 28 12 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 5d 73 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 RSP: 002b:00007ffd772ead18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000034 RCX: 00007ff6f6147c60 RDX: 0000000000000034 RSI: 000055df30a31270 RDI: 0000000000000003 RBP: 000055df30a31270 R08: 0000000000000000 R09: 0000000000000000 R10: 00007ffd772ead70 R11: 0000000000000246 R12: 00007ffd772ead74 R13: 00007ffd772eae20 R14: 00007ffd772eae24 R15: 000055df2f12ddc0 Allocated by task 6052: kasan_kmalloc+0xa0/0xd0 __kmalloc+0x10a/0x220 ops_init+0x97/0x190 register_pernet_operations+0x1ac/0x360 register_pernet_subsys+0x24/0x40 0xffffffffc0ea016d do_one_initcall+0x8b/0x253 do_init_module+0xe3/0x335 load_module+0x2fc0/0x3890 __do_sys_finit_module+0x192/0x1c0 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 6067: __kasan_slab_free+0x130/0x180 kfree+0x90/0x1a0 ops_free_list.part.7+0xa6/0xc0 unregister_pernet_operations+0x18b/0x1f0 unregister_pernet_subsys+0x1d/0x30 ip_vs_cleanup+0x1d/0xd2f [ip_vs] __x64_sys_delete_module+0x20c/0x300 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8881e9b26600 which belongs to the cache kmalloc-4096 of size 4096 The buggy address is located 2092 bytes inside of 4096-byte region [ffff8881e9b26600, ffff8881e9b27600) The buggy address belongs to the page: page:ffffea0007a6c800 count:1 mapcount:0 mapping:ffff888107c0e600 index:0x0 compound_mapcount: 0 flags: 0x17ffffc0008100(slab|head) raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff888107c0e600 raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected while unregistering ipvs module, ops_free_list calls __ip_vs_cleanup, then nf_unregister_net_hooks be called to do remove nf hook entries. It need a RCU period to finish, however net->ipvs is set to NULL immediately, which will trigger NULL pointer dereference when a packet is hooked and handled by ip_vs_in where net->ipvs is dereferenced. Another scene is ops_free_list call ops_free to free the net_generic directly while __ip_vs_cleanup finished, then calling ip_vs_in will triggers use-after-free. This patch moves nf_unregister_net_hooks from __ip_vs_cleanup() to __ip_vs_dev_cleanup(), where rcu_barrier() is called by unregister_pernet_device -> unregister_pernet_operations, that will do the needed grace period. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: efe4160 ("ipvs: convert to use pernet nf_hook api") Suggested-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

Original implementation commit e54bcde ("arm64: eBPF JIT compiler") had the relevant code paths, but due to an oversight always fail jiting. As a result, we had been falling back to BPF interpreter whenever a BPF program has JMP_JSET_{X,K} instructions. With this fix, we confirm that the corresponding tests in lib/test_bpf continue to pass, and also jited. ... [ 2.784553] test_bpf: #30 JSET jited:1 188 192 197 PASS [ 2.791373] test_bpf: #31 tcpdump port 22 jited:1 325 677 625 PASS [ 2.808800] test_bpf: #32 tcpdump complex jited:1 323 731 991 PASS ... [ 3.190759] test_bpf: #237 JMP_JSET_K: if (0x3 & 0x2) return 1 jited:1 110 PASS [ 3.192524] test_bpf: #238 JMP_JSET_K: if (0x3 & 0xffffffff) return 1 jited:1 98 PASS [ 3.211014] test_bpf: #249 JMP_JSET_X: if (0x3 & 0x2) return 1 jited:1 120 PASS [ 3.212973] test_bpf: #250 JMP_JSET_X: if (0x3 & 0xffffffff) return 1 jited:1 89 PASS ... Fixes: e54bcde ("arm64: eBPF JIT compiler") Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>

[ Upstream commit 83f3522 ] fib_trie_unmerge() is called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB alias list in a leaf is traversed with hlist_for_each_entry_rcu(). Since the function is always called with RTNL held and since modification of the list is protected by RTNL, simply use hlist_for_each_entry() and silence the warning. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b MiCode#30 Not tainted ----------------------------- net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/164: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b MiCode#30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d fib_trie_unmerge+0x608/0xdb0 fib_unmerge+0x44/0x360 fib4_rule_configure+0xc8/0xad0 fib_nl_newrule+0x37a/0x1dd0 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc80a234e97 Code: Bad RIP value. RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97 RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003 RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000 R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020 Fixes: 0ddcf43 ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 MiCode#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 MiCode#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 MiCode#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 MiCode#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 MiCode#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 MiCode#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 MiCode#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 MiCode#32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 MiCode#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 MiCode#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 MiCode#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 MiCode#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 MiCode#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 MiCode#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 MiCode#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 MiCode#32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 MiCode#33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 MiCode#35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…one script The build messages for fdimage/isoimage generation are pretty unstructured, just the raw shell command blocks are printed. Emit shortened messages similar to existing kbuild messages, and move the Makefile commands into a separate shell script - which is much easier to handle. This patch factors out the commands used for fdimage/isoimage generation from arch/x86/boot/Makefile to a new script arch/x86/boot/genimage.sh. Then it adds the new kbuild command 'genimage' which invokes the new script. All fdimages/isoimage files are now generated by a call to 'genimage' with different parameters. Now 'make isoimage' becomes: ... Kernel: arch/x86/boot/bzImage is ready (#30) GENIMAGE arch/x86/boot/image.iso Size of boot image is 4 sectors -> No emulation 15.37% done, estimate finish Sun Nov 5 23:36:57 2017 30.68% done, estimate finish Sun Nov 5 23:36:57 2017 46.04% done, estimate finish Sun Nov 5 23:36:57 2017 61.35% done, estimate finish Sun Nov 5 23:36:57 2017 76.69% done, estimate finish Sun Nov 5 23:36:57 2017 92.00% done, estimate finish Sun Nov 5 23:36:57 2017 Total translation table size: 2048 Total rockridge attributes bytes: 659 Total directory bytes: 0 Path table size(bytes): 10 Max brk space used 0 32608 extents written (63 MB) Kernel: arch/x86/boot/image.iso is ready Before: Kernel: arch/x86/boot/bzImage is ready (#63) rm -rf arch/x86/boot/isoimage mkdir arch/x86/boot/isoimage for i in lib lib64 share end ; do \ if [ -f /usr/$i/syslinux/isolinux.bin ] ; then \ cp /usr/$i/syslinux/isolinux.bin arch/x86/boot/isoimage ; \ if [ -f /usr/$i/syslinux/ldlinux.c32 ]; then \ cp /usr/$i/syslinux/ldlinux.c32 arch/x86/boot/isoimage ; \ fi ; \ break ; \ fi ; \ if [ $i = end ] ; then exit 1 ; fi ; \ done ... Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1509939179-7556-2-git-send-email-changbin.du@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>

…nable() [ Upstream commit 898bc40 ] Fix au0828_analog_stream_enable() to check if device is in the right state first. When unbind happens while bind is in progress, usbdev pointer could be invalid in au0828_analog_stream_enable() and a call to usb_ifnum_to_if() will result in the null pointer dereference. This problem is found with the new media_dev_allocator.sh test. kernel: [ 590.359623] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e8 kernel: [ 590.359627] #PF error: [normal kernel read fault] kernel: [ 590.359629] PGD 0 P4D 0 kernel: [ 590.359632] Oops: 0000 [MiCode#1] SMP PTI kernel: [ 590.359634] CPU: 3 PID: 1458 Comm: v4l_id Not tainted 5.1.0-rc2+ MiCode#30 kernel: [ 590.359636] Hardware name: Dell Inc. OptiPlex 7 90/0HY9JP, BIOS A18 09/24/2013 kernel: [ 590.359641] RIP: 0010:usb_ifnum_to_if+0x6/0x60 kernel: [ 590.359643] Code: 5d 41 5e 41 5f 5d c3 48 83 c4 10 b8 fa ff ff ff 5b 41 5c 41 5d 41 5e 41 5f 5d c3 b8 fa ff ff ff c3 0f 1f 00 6 6 66 66 66 90 55 <48> 8b 97 e8 04 00 00 48 89 e5 48 85 d2 74 41 0f b6 4a 04 84 c 9 74 kernel: [ 590.359645] RSP: 0018:ffffad3cc3c1fc00 EFLAGS: 00010246 kernel: [ 590.359646] RAX: 0000000000000000 RBX: ffff8ded b1f3c000 RCX: 1f377e4500000000 kernel: [ 590.359648] RDX: ffff8dedfa3a6b50 RSI: 00000000 00000000 RDI: 0000000000000000 kernel: [ 590.359649] RBP: ffffad3cc3c1fc28 R08: 00000000 8574acc2 R09: ffff8dedfa3a6b50 kernel: [ 590.359650] R10: 0000000000000001 R11: 00000000 00000000 R12: 0000000000000000 kernel: [ 590.359652] R13: ffff8dedb1f3f0f0 R14: ffffffff adcf7ec0 R15: 0000000000000000 kernel: [ 590.359654] FS: 00007f7917198540(0000) GS:ffff 8dee258c0000(0000) knlGS:0000000000000000 kernel: [ 590.359655] CS: 0010 DS: 0000 ES: 0000 CR0: 00 00000080050033 kernel: [ 590.359657] CR2: 00000000000004e8 CR3: 00000001 a388e002 CR4: 00000000000606e0 kernel: [ 590.359658] Call Trace: kernel: [ 590.359664] ? au0828_analog_stream_enable+0x2c/0x180 kernel: [ 590.359666] au0828_v4l2_open+0xa4/0x110 kernel: [ 590.359670] v4l2_open+0x8b/0x120 kernel: [ 590.359674] chrdev_open+0xa6/0x1c0 kernel: [ 590.359676] ? cdev_put.part.3+0x20/0x20 kernel: [ 590.359678] do_dentry_open+0x1f6/0x360 kernel: [ 590.359681] vfs_open+0x2f/0x40 kernel: [ 590.359684] path_openat+0x299/0xc20 kernel: [ 590.359688] do_filp_open+0x9b/0x110 kernel: [ 590.359695] ? _raw_spin_unlock+0x27/0x40 kernel: [ 590.359697] ? __alloc_fd+0xb2/0x160 kernel: [ 590.359700] do_sys_open+0x1ba/0x260 kernel: [ 590.359702] ? do_sys_open+0x1ba/0x260 kernel: [ 590.359712] __x64_sys_openat+0x20/0x30 kernel: [ 590.359715] do_syscall_64+0x5a/0x120 kernel: [ 590.359718] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Updated kernel sources for Dior #30

Updated kernel sources for Dior #30

Stane1983 commented Sep 28, 2015

git-rbanerjee commented Oct 25, 2015

sarvesvara commented Mar 6, 2016

chenyuwen commented Mar 14, 2016

demonguy commented Mar 14, 2016

Updated kernel sources for Dior #30

Updated kernel sources for Dior #30

Comments

Stane1983 commented Sep 28, 2015

git-rbanerjee commented Oct 25, 2015

sarvesvara commented Mar 6, 2016

chenyuwen commented Mar 14, 2016

demonguy commented Mar 14, 2016