Beta v8.16.0

.build/images/NanoPiM3/boot.cmd

@@ -9,7 +9,6 @@
 setenv rootdev "/dev/mmcblk2p1"
 setenv rootfstype "ext4"
 setenv consoleargs "console=ttySAC0,115200 console=tty1"
-setenv verbosity "4"
 setenv docker_optimizations "off"
 
 # Load addresses
@@ -18,13 +17,12 @@ setenv ramdisk_addr_r "0x49000000"
 setenv kernel_addr_r "0x4a000000"
 
 # Load dietpiEnv.txt
-if test -e mmc ${devnum} ${prefix}dietpiEnv.txt; then
- ext4load mmc ${devnum} ${kernel_addr_r} ${prefix}dietpiEnv.txt
+if ext4load mmc ${devnum} ${kernel_addr_r} ${prefix}dietpiEnv.txt; then
  env import -t ${kernel_addr_r} ${filesize}
 fi
 
 # Define kernel command-line arguments
-setenv bootargs "root=${rootdev} rootfstype=${rootfstype} rootwait ${consoleargs} loglevel=${verbosity} consoleblank=0 systemd.unified_cgroup_hierarchy=0 usb-storage.quirks=${usbstoragequirks} ${extraargs}"
+setenv bootargs "root=${rootdev} rootfstype=${rootfstype} rootwait ${consoleargs} consoleblank=0 systemd.unified_cgroup_hierarchy=0 usb-storage.quirks=${usbstoragequirks} ${extraargs}"
 
 # Add bootargs for Docker
 if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi

.build/images/OdroidC1/boot.ini

@@ -13,7 +13,7 @@ ODROIDC-UBOOT-CONFIG
 #setenv m "1440x900p60hz" # 1440x900
 #setenv m "1600x900p60hz" # 1600x900
 #setenv m "1680x1050p60hz" # 1680x1050
-#setenv m "720p" # 720p 1280x720
+#setenv m "720p" # 1280x720
 #setenv m "800p" # 1280x800
 #setenv m "sxga" # 1280x1024
 #setenv m "1080i50hz" # 1080I@50Hz
@@ -26,50 +26,50 @@ setenv m "1080p" # 1080P@60Hz
 # - DVI mode disables HDMI sound
 setenv vout "hdmi"
 
-# HDMI BPP Mode: "32", "24" or "12"
+# HDMI BPP mode: "32", "24" or "12"
 setenv m_bpp "32"
 
 # Monitor output: "true" or "false"
 # - Controls if HDMI PHY should output anything to the monitor
 setenv monitor_onoff "true"
 
-# HDMI Hot Plug detection
+# HDMI Hot Plug Detect
 # - "0" disables auto-detection and forces HDMI output.
 # - "1" enables HDMI detection based on cable connection (default).
-#setenv hpd "0"
+#setenv hpd "1"
 
 # CEC (requires hardware modification)
 # - "0" disables HDMI CEC (default).
 # - "1" enables HDMI CEC.
 #setenv cec "0"
 
-# PCM5102 I2S Audio DAC
-# - PCM5102 is an I2S Audio DAC addon board for ODROID-C1+
+# PCM5102 I2S audio DAC
+# - PCM5102 is an I2S audio DAC addon board for ODROID-C1+
 # - Uncomment the line below to __ENABLE__ support for this addon board.
 #setenv enabledac "enabledac"
 
-# UHS Card Configuration
-# - Uncomment the line below to __DISABLE__ UHS-1 Micro SD support
+# UHS card support
+# - Uncomment the line below to __DISABLE__ UHS-1 microSD support
 # - This might break boot for some brand models of cards.
 #setenv disableuhs "disableuhs"
 
-# Disable VPU (Video decoding engine, saves RAM!!!)
+# Disable VPU video decoding engine to save RAM
 # - 0 = disabled
 # - 1 = enabled (default)
 #setenv vpu "1"
 
-# Disable HDMI Output (Again, saves RAM!)
+# Disable HDMI output to save RAM
 # - 0 = disabled
 # - 1 = enabled (default)
 #setenv hdmioutput "1"
 
-# Default Console Device Setting
-setenv condev "console=ttyAML0,115200n8 console=tty1"
+# Console device(s) for boot and kernel logs
+setenv condev "console=tty1 console=ttyAML0,115200n8"
 
-# ODROID-VU7 touchscreen: "false" or "true", defaults to "true"
-#setenv disable_vu7 "false"
+# Disable ODROID-VU7 touchscreen support: "false" or "true", defaults to "true"
+#setenv disable_vu7 "true"
 
-# CPU Max Frequency: 96 192 312 408 504 600 720 816 1008 1200 1320 1488 1536 1632 1728 or 1824
+# Max CPU frequency: 96 192 312 408 504 600 720 816 1008 1200 1320 1488 1536 1632 1728 or 1824
 setenv max_freq "1536"
 
 ### DO NOT EDIT ANYTHING BELOW THIS LINE ###
@@ -79,7 +79,7 @@ if test "${cec}" = "1"; then setenv hdmi_cec "hdmitx=cecf"; fi
 if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi
 
 # Boot arguments
-setenv bootargs "root=UUID=0ae78c3b-9579-4a13-8b2d-58ad222f2ca6 rootfstype=ext4 rootwait rw ${condev} loglevel=4 no_console_suspend consoleblank=0 vdaccfg=0xa000 dmfc=3 cvbsmode=576cvbs hdmimode=${m} m_bpp=${m_bpp} vout=${vout} ${disableuhs} ${hdmi_hpd} ${hdmi_cec} ${enabledac} monitor_onoff=${monitor_onoff} max_freq=${max_freq} ${hid_quirks} ${extraargs}"
+setenv bootargs "root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw ${condev} consoleblank=0 net.ifnames=0 vdaccfg=0xa000 dmfc=3 cvbsmode=576cvbs hdmimode=${m} m_bpp=${m_bpp} vout=${vout} ${disableuhs} ${hdmi_hpd} ${hdmi_cec} ${enabledac} monitor_onoff=${monitor_onoff} max_freq=${max_freq} ${hid_quirks}"
 
 # Booting
 fatload mmc 0:1 0x20800000 uImage

.build/images/OdroidXU4/boot.ini

@@ -8,19 +8,19 @@ setenv fdt_high "0xffffffff"
 setenv macaddr "00:1e:06:61:7a:72"
 
 # Kernel command-line parameters
-setenv bootrootfs "root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro console=ttySAC2,115200n8 console=tty1 consoleblank=0 fsck.repair=yes net.ifnames=0"
+setenv bootrootfs "root=/dev/mmcblk0p1 rootfstype=ext4 rootwait ro console=ttySAC2,115200n8 console=tty1 consoleblank=0 net.ifnames=0"
 
 # HDMI/DVI selection: "hdmi" or "dvi"
 # - DVI mode disables HDMI sound
 setenv vout "hdmi"
 
-# HDMI Hot Plug detection: "false" or "true"
-# - "true" enables HDMI detection based on cable connection.
+# HDMI Hot Plug Detect
 # - "false" disables auto-detection and forces HDMI output.
+# - "true" enables HDMI detection based on cable connection.
 setenv HPD "true"
 
 # HDMI CEC: "false" or "true", defaults to "true"
-#setenv cecenable "false"
+#setenv cecenable "true"
 
 # HDMI resolution
 # - Uncomment only ONE line! Leave all commented for automatic selection.
@@ -123,11 +123,11 @@ setenv HPD "true"
 #setenv videoconfig "drm_kms_helper.edid_firmware=edid/480x800.bin"
 # -----------------------------------------------
 
-# ODROID-VU7 touchscreen: "false" or "true", defaults to "true"
-#setenv disable_vu7 "false"
+# Disable ODROID-VU7 touchscreen support: "false" or "true", defaults to "true"
+#setenv disable_vu7 "true"
 
-# ODROID CloudShell2 TFT LCD and FAN control via I2C bus: "false" or "true", defaults to "false"
-#setenv cs2enable "true"
+# ODROID CloudShell 2 TFT LCD and FAN control via I2C bus: "false" or "true", defaults to "false"
+#setenv cs2enable "false"
 
 # Device tree overlays
 # - See /boot/dtb/overlays for available overlays: defaults to empty string ""
@@ -137,8 +137,8 @@ setenv HPD "true"
 # - DietPi will override this setting to user configured in dietpi-config > Performance Options > CPU governor
 setenv governor "performance"
 
-# DDR frequency [MHz]: "933", "825", "728" or "633", defaults to "825"
-#setenv ddr_freq "933"
+# DDR frequency [MHz]: "633", "728", "825" or "933", defaults to "825"
+#setenv ddr_freq "825"
 
 # TMDS data amplitude control.
 # - 1LSB corresponds to 20 mVdiff amplitude level
@@ -176,13 +176,13 @@ setenv hdmi_tx_res "0"
 setenv hdmi_phy_control "hdmi_tx_amp_lvl=${hdmi_tx_amp_lvl} hdmi_tx_lvl_ch0=${hdmi_tx_lvl_ch0} hdmi_tx_lvl_ch1=${hdmi_tx_lvl_ch1} hdmi_tx_lvl_ch2=${hdmi_tx_lvl_ch2} hdmi_tx_emp_lvl=${hdmi_tx_emp_lvl} hdmi_clk_amp_lvl=${hdmi_clk_amp_lvl} hdmi_tx_res=${hdmi_tx_res} HPD=${HPD} vout=${vout}"
 
 # Load kernel, initrd and dtb in that sequence
-ext4load mmc 0:1 0x40008000 /boot/zImage
-ext4load mmc 0:1 0x42000000 /boot/uInitrd
+ext4load mmc 0:1 0x40008000 /boot/zImage || fatload mmc 0:1 0x40008000 zImage || ext4load mmc 0:1 0x40008000 zImage
+ext4load mmc 0:1 0x42000000 /boot/uInitrd || fatload mmc 0:1 0x42000000 uInitrd || ext4load mmc 0:1 0x42000000 uInitrd
 if test "${board_name}" = "xu4"; then setenv fdtfile "exynos5422-odroidxu4.dtb"; fi
 if test "${board_name}" = "xu3"; then setenv fdtfile "exynos5422-odroidxu3.dtb"; fi
 if test "${board_name}" = "xu3l"; then setenv fdtfile "exynos5422-odroidxu3-lite.dtb"; fi
 if test "${board_name}" = "hc1"; then setenv fdtfile "exynos5422-odroidhc1.dtb"; fi
-ext4load mmc 0:1 0x44000000 /boot/dtb/${fdtfile}
+ext4load mmc 0:1 0x44000000 /boot/dtb/${fdtfile} || fatload mmc 0:1 0x44000000 dtb/${fdtfile} || ext4load mmc 0:1 0x44000000 dtb/${fdtfile}
 
 # Set FDT address
 fdt addr 0x44000000
@@ -205,7 +205,7 @@ fi
 if test "x${overlays}" != "x"; then
  fdt resize 8192
  for overlay in ${overlays}; do
- ext4load mmc 0:1 0x60000000 /boot/dtb/overlays/${overlay}.dtbo
+ ext4load mmc 0:1 0x60000000 /boot/dtb/overlays/${overlay}.dtbo || fatload mmc 0:1 0x60000000 dtb/overlays/${overlay}.dtbo || ext4load mmc 0:1 0x60000000 dtb/overlays/${overlay}.dtbo
  fdt apply 0x60000000
  done
 fi

.build/images/Quartz64/quartz64_defconfig

@@ -15,7 +15,9 @@ CONFIG_SQUASHFS_ZSTD=y
 CONFIG_CAN_GS_USB=m
 CONFIG_CFS_BANDWIDTH=y
 CONFIG_ISCSI_TCP=m
+CONFIG_IPV6_SIT=n
 CONFIG_MODULE_COMPRESS_XZ=y
+CONFIG_LRU_GEN_ENABLED=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
@@ -65,10 +67,13 @@ CONFIG_ARM_CPUIDLE=y
 CONFIG_ARM_PSCI_CPUIDLE=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_ACPI_CPPC_CPUFREQ=m
 CONFIG_ARM_SCPI_CPUFREQ=y
@@ -366,6 +371,7 @@ CONFIG_MTD_NAND_DENALI_DT=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_OF_OVERLAY=y
 CONFIG_ZRAM=m
+CONFIG_ZRAM_DEF_COMP_ZSTD=y
 CONFIG_ZRAM_MEMORY_TRACKING=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_NBD=m
@@ -983,7 +989,7 @@ CONFIG_FANOTIFY=y
 CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
 CONFIG_QUOTA=y
 CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
+CONFIG_FUSE_FS=y
 CONFIG_CUSE=m
 CONFIG_OVERLAY_FS=m
 CONFIG_VFAT_FS=y