Midnite Breeze Case V3

Midnite Breeze is an unofficial case for the Breeze keyboard by Afternoon Labs

This is a 3-part 3D printed case that allows you to fully enclose your PCB. A well calibrated printer is recommended due to the tolerances required for friction-fit parts.

Supported:

✅ MX profile
✅ Ocean Breeze layout
✅ Southern Breeze layout
✅ Summer Breeze layout
✅ Tenting
✅ Breeze aluminum plate

Not Supported:

❌ Gust macropad ❌ Choc profile ❌ ErgoDox Tilt/Tent Kit

Included:

The files include STLs for the Top, Plate, and Bottom piece - every piece can be mirrored in your slicer. The USB-C and TRRS ports are large enough to support both positions. Tenting is also included but is optional.

Tenting:

There are holes on the underside of the base so you can glue in ø 8mm magnets (3mm thick). You can then print your own tenting solution or use mine. I like the option of quickly removing my tenting, so I went with magnets.

Mounting:

There are 4 (5 on the large base) to install M3x5x4 heatset inserts on the inside of the base so that you can screw-mount your PCB. In my test, I've found this to be unnecessary, but the option is there - if you're using the FR4 Plate, I recommend this screwing it in.

3D Printing:

No supports necessary - the only overhangs are on the ports (TRRS & USB) and the underside magnet holes. With enough cooling, I find this isn't an issue - I tested both PLA and ABS

Orientation:

• Print the Top piece upside down (flat side down on the build plate)
• Print the Plate flat, with the 'down' side touching the build plate
• Print the Bottom piece flat side down - no supports are needed

Questions:

Contact me on the Breeze Discord - @Midnite#1337