Merge pull request agherzan#1 from Minipada/cm3-64-synced

Cm3 64 synced

classes/sdcard_image-rpi.bbclass

@@ -1,5 +1,4 @@
 inherit image_types
-inherit linux-raspberrypi-base
 
 #
 # Create an image that can by written onto a SD card using dd.
@@ -36,6 +35,7 @@ KERNEL_INITRAMFS ?= ""
 SDIMG_KERNELIMAGE_raspberrypi  ?= "kernel.img"
 SDIMG_KERNELIMAGE_raspberrypi2 ?= "kernel7.img"
 SDIMG_KERNELIMAGE_raspberrypi3-64 ?= "kernel8.img"
+SDIMG_KERNELIMAGE_raspberrypi-cm3-64 ?= "kernel8.img"
 
 # Boot partition volume id
 BOOTDD_VOLUME_ID ?= "${MACHINE}"
@@ -48,15 +48,15 @@ IMAGE_ROOTFS_ALIGNMENT = "4096"
 
 # Use an uncompressed ext3 by default as rootfs
 SDIMG_ROOTFS_TYPE ?= "ext3"
-SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
+SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.${SDIMG_ROOTFS_TYPE}"
 
 do_image_rpi_sdimg[depends] = " \
 			parted-native:do_populate_sysroot \
 			mtools-native:do_populate_sysroot \
 			dosfstools-native:do_populate_sysroot \
 			virtual/kernel:do_deploy \
 			${IMAGE_BOOTLOADER}:do_deploy \
-			${@bb.utils.contains('KERNEL_IMAGETYPE', 'uImage', 'u-boot:do_deploy', '',d)} \
+			${@bb.utils.contains('RPI_USE_U_BOOT', '1', 'u-boot:do_deploy', '',d)} \
 			"
 
 # SD card image name
@@ -73,9 +73,20 @@ SDIMG = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.rpi-sdimg"
 FATPAYLOAD ?= ""
 
 # SD card vfat partition image name
-SDIMG_VFAT = "${IMGDEPLOYDIR}/${IMAGE_NAME}.vfat"
+SDIMG_VFAT = "${IMAGE_NAME}.vfat"
 SDIMG_LINK_VFAT = "${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.vfat"
 
+def split_overlays(d, out, ver=None):
+    dts = d.getVar("KERNEL_DEVICETREE")
+    if out:
+        overlays = oe.utils.str_filter_out('\S+\-overlay\.dtb$', dts, d)
+        overlays = oe.utils.str_filter_out('\S+\.dtbo$', overlays, d)
+    else:
+        overlays = oe.utils.str_filter('\S+\-overlay\.dtb$', dts, d) + \
+                   " " + oe.utils.str_filter('\S+\.dtbo$', dts, d)
+
+    return overlays
+
 IMAGE_CMD_rpi-sdimg () {
 
 	# Align partitions
@@ -86,7 +97,7 @@ IMAGE_CMD_rpi-sdimg () {
 	echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $ROOTFS_SIZE KiB"
 
 	# Check if we are building with device tree support
-	DTS="${@get_dts(d)}"
+	DTS="${KERNEL_DEVICETREE}"
 
 	# Initialize sdcard image file
 	dd if=/dev/zero of=${SDIMG} bs=1024 count=0 seek=${SDIMG_SIZE}
@@ -126,16 +137,13 @@ IMAGE_CMD_rpi-sdimg () {
 			mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.${DTB_EXT} ::overlays/${DTB_BASE_NAME}.${DTB_EXT}
 		done
 	fi
-	case "${KERNEL_IMAGETYPE}" in
-	"uImage")
+        if [ "${RPI_USE_U_BOOT}" = "1" ]; then
 		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.bin ::${SDIMG_KERNELIMAGE}
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::uImage
+		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::${KERNEL_IMAGETYPE}
 		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
-		;;
-	*)
+	else
 		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::${SDIMG_KERNELIMAGE}
-		;;
-	esac
+	fi
 
 	if [ -n ${FATPAYLOAD} ] ; then
 		echo "Copying payload into VFAT"
@@ -150,23 +158,19 @@ IMAGE_CMD_rpi-sdimg () {
 	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}/image-version-info ::
 
         # Deploy vfat partition (for u-boot case only)
-        case "${KERNEL_IMAGETYPE}" in
-        "uImage")
-                cp ${WORKDIR}/boot.img ${SDIMG_VFAT}
+        if [ "${RPI_USE_U_BOOT}" = "1" ]; then
+                cp ${WORKDIR}/boot.img ${IMGDEPLOYDIR}/${SDIMG_VFAT}
                 ln -sf ${SDIMG_VFAT} ${SDIMG_LINK_VFAT}
-                ;;
-        *)
-                ;;
-        esac
+        fi
 
 	# Burn Partitions
-	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
 	# If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
 	if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
 	then
-		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
 	else
-		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
 	fi
 
 	# Optionally apply compression

conf/layer.conf

@@ -12,3 +12,12 @@ BBFILE_PRIORITY_raspberrypi = "9"
 # Additional license directories.
 LICENSE_PATH += "${LAYERDIR}/files/custom-licenses"
 
+# The dynamic-layers directory hosts the extensions and layer specific
+# modifications.
+#
+# The .bbappend and .bb files are included if the respective layer
+# collection is available.
+BBFILES += "${@' '.join('${LAYERDIR}/dynamic-layers/%s/recipes*/*/*.bbappend' % layer \
+               for layer in BBFILE_COLLECTIONS.split())}"
+BBFILES += "${@' '.join('${LAYERDIR}/dynamic-layers/%s/recipes*/*/*.bb' % layer \
+               for layer in BBFILE_COLLECTIONS.split())}"

conf/machine/include/rpi-base.inc

@@ -41,7 +41,17 @@ KERNEL_DEVICETREE ?= " \
     overlays/pi3-miniuart-bt.dtbo \
     overlays/vc4-kms-v3d.dtbo \
     "
-KERNEL_IMAGETYPE ?= "Image"
+
+# By default:
+#
+# * When u-boot is disabled use the "Image" format which can be directly loaded
+#   by the rpi firmware.
+#
+# * When u-boot is enabled use the "uImage" format and the "bootm" command
+#   within u-boot to load the kernel.
+KERNEL_BOOTCMD ??= "bootm"
+KERNEL_IMAGETYPE_UBOOT ??= "uImage"
+KERNEL_IMAGETYPE ?= "${@bb.utils.contains('RPI_USE_U_BOOT', '1', '${KERNEL_IMAGETYPE_UBOOT}', 'Image', d)}"
 
 MACHINE_FEATURES += "apm usbhost keyboard vfat ext2 screen touchscreen alsa bluetooth wifi sdio"
 
@@ -83,10 +93,14 @@ def make_dtb_boot_files(d):
 
 IMAGE_BOOT_FILES ?= "bcm2835-bootfiles/* \
                  ${@make_dtb_boot_files(d)} \
-                 ${@bb.utils.contains('KERNEL_IMAGETYPE', 'uImage', '${KERNEL_IMAGETYPE}', '${KERNEL_IMAGETYPE};${SDIMG_KERNELIMAGE}', d)} \
-                 ${@bb.utils.contains('KERNEL_IMAGETYPE', 'uImage', 'u-boot.bin;${SDIMG_KERNELIMAGE}', '', d)} \
-                 ${@bb.utils.contains('KERNEL_IMAGETYPE', 'uImage', 'boot.scr;boot.scr', '', d)} \
+                 ${@bb.utils.contains('RPI_USE_U_BOOT', '1', \
+                    '${KERNEL_IMAGETYPE} u-boot.bin;${SDIMG_KERNELIMAGE} boot.scr', \
+                    '${KERNEL_IMAGETYPE};${SDIMG_KERNELIMAGE}', d)} \
                  "
+do_image_wic[depends] += " \
+    bcm2835-bootfiles:do_deploy \
+    ${@bb.utils.contains('RPI_USE_U_BOOT', '1', 'u-boot:do_deploy', '',d)} \
+    "
 
 # The kernel image is installed into the FAT32 boot partition and does not need
 # to also be installed into the rootfs.

conf/machine/raspberrypi-cm3-64.conf

@@ -0,0 +1,41 @@
+#@TYPE: Machine
+#@NAME: RaspberryPi 3 Development Board
+#@DESCRIPTION: Machine configuration for the RaspberryPi 3 in 64 bits mode
+
+MACHINEOVERRIDES = "raspberrypi2:${MACHINE}"
+
+MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-bcm43430"
+
+require conf/machine/include/arm/arch-armv8.inc
+include conf/machine/include/rpi-base.inc
+
+KERNEL_DEVICETREE = " \
+    broadcom/bcm2837-rpi-cm3.dtb \
+    \
+    overlays/hifiberry-amp.dtbo \
+    overlays/hifiberry-dac.dtbo \
+    overlays/hifiberry-dacplus.dtbo \
+    overlays/hifiberry-digi.dtbo \
+    overlays/i2c-rtc.dtbo \
+    overlays/iqaudio-dac.dtbo \
+    overlays/iqaudio-dacplus.dtbo \
+    overlays/lirc-rpi.dtbo \
+    overlays/pitft22.dtbo \
+    overlays/pitft28-resistive.dtbo \
+    overlays/pitft35-resistive.dtbo \
+    overlays/pps-gpio.dtbo \
+    overlays/rpi-ft5406.dtbo \
+    overlays/w1-gpio.dtbo \
+    overlays/w1-gpio-pullup.dtbo \
+    overlays/pi3-disable-bt.dtbo \
+    overlays/pi3-miniuart-bt.dtbo \
+    overlays/vc4-kms-v3d.dtbo \
+    overlays/vc4-fkms-v3d.dtbo \
+    "
+
+SERIAL_CONSOLE ?= "115200 ttyS0"
+#VC4_CMA_SIZE ?= "cma-256"
+
+UBOOT_MACHINE = "rpi_3_config"
+#MACHINE_FEATURES_append = " vc4graphics"
+KERNEL_DEFCONFIG ?= "bcmrpi3_defconfig"

conf/machine/raspberrypi3-64.conf

@@ -31,10 +31,16 @@ KERNEL_DEVICETREE = " \
     overlays/pi3-disable-bt.dtbo \
     overlays/pi3-miniuart-bt.dtbo \
     overlays/vc4-kms-v3d.dtbo \
+    overlays/vc4-fkms-v3d.dtbo \
     "
 
 SERIAL_CONSOLE ?= "115200 ttyS0"
 VC4_CMA_SIZE ?= "cma-256"
 
 UBOOT_MACHINE = "rpi_3_config"
 MACHINE_FEATURES_append = " vc4graphics"
+
+# When u-boot is enabled we need to use the "Image" format and the "booti"
+# command to load the kernel
+KERNEL_IMAGETYPE_UBOOT ?= "Image"
+KERNEL_BOOTCMD ?= "booti"

docs/extra-build-config.md

@@ -95,14 +95,22 @@ this variable in local.conf:
 
     ENABLE_KGDB = "1"
 
+## Disable rpi boot logo
+
+To disable rpi boot logo, set this variable in local.conf:
+
+    DISABLE_RPI_BOOT_LOGO = "1"
+
 ## Boot to U-Boot
 
 To have u-boot load kernel image, set in your local.conf:
 
-    KERNEL_IMAGETYPE = "uImage"
+    RPI_USE_U_BOOT = "1"
 
-This will make kernel.img be u-boot image which will load uImage. By default,
-kernel.img is the actual kernel image (ex. Image).
+This will select the appropriate image format for use with u-boot automatically.
+For further customisation the KERNEL_IMAGETYPE and KERNEL_BOOTCMD variables can
+be overridden to select the exact kernel image type (eg. zImage) and u-boot
+command (eg. bootz) to be used.
 
 ## Image with Initramfs
 

recipes-bsp/bootfiles/bcm2835-bootfiles.bb

@@ -9,7 +9,7 @@ include recipes-bsp/common/firmware.inc
 
 RDEPENDS_${PN} = "rpi-config"
 
-COMPATIBLE_MACHINE = "raspberrypi"
+COMPATIBLE_MACHINE = "^rpi$"
 
 S = "${RPIFW_S}/boot"
 

recipes-bsp/bootfiles/rpi-config_git.bb

@@ -5,7 +5,7 @@ DESCRIPTION = "Commented config.txt file for the Raspberry Pi. \
 LICENSE = "MIT"
 LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
 
-COMPATIBLE_MACHINE = "raspberrypi"
+COMPATIBLE_MACHINE = "^rpi$"
 
 SRCREV = "648ffc470824c43eb0d16c485f4c24816b32cd6f"
 SRC_URI = "git://github.com/Evilpaul/RPi-config.git;protocol=git;branch=master \
@@ -21,7 +21,8 @@ PITFT28r="${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "1", "0", d)}"
 PITFT35r="${@bb.utils.contains("MACHINE_FEATURES", "pitft35r", "1", "0", d)}"
 
 VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"
-
+VC4DTBO_raspberrypi3-64 = "vc4-fkms-v3d"
+VC4DTBO ?= "vc4-kms-v3d"
 inherit deploy
 
 do_deploy() {
@@ -114,7 +115,7 @@ do_deploy() {
     # VC4 Graphics support
     if [ "${VC4GRAPHICS}" = "1" ]; then
         echo "# Enable VC4 Graphics" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
-        echo "dtoverlay=vc4-kms-v3d,${VC4_CMA_SIZE}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "dtoverlay=${VC4DTBO},${VC4_CMA_SIZE}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
 
     # Waveshare "C" 1024x600 7" Rev2.1 IPS capacitive touch (http://www.waveshare.com/7inch-HDMI-LCD-C.htm)
@@ -129,6 +130,12 @@ do_deploy() {
 }
 
 do_deploy_append_raspberrypi3-64() {
+    echo "# have a properly sized image" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    echo "disable_overscan=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+
+    echo "# Enable audio (loads snd_bcm2835)" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    echo "dtparam=audio=on" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+
     # Device Tree support
     echo "# Load correct Device Tree for Aarch64" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     echo "device_tree=bcm2710-rpi-3-b.dtb" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt

recipes-bsp/common/firmware.inc

@@ -1,10 +1,10 @@
-RPIFW_DATE ?= "20170405"
+RPIFW_DATE ?= "20170811"
 RPIFW_SRC_URI ?= "https://github.com/raspberrypi/firmware/archive/1.${RPIFW_DATE}.tar.gz"
 RPIFW_S ?= "${WORKDIR}/firmware-1.${RPIFW_DATE}"
 
 SRC_URI = "${RPIFW_SRC_URI}"
-SRC_URI[md5sum] = "ea82d14a7cd8cfae9b78e00d4e56bc71"
-SRC_URI[sha256sum] = "2f4e5bddbac1372590db203002c35cbba3fb9d6172a93c314ee27bf05ae13bff"
+SRC_URI[md5sum] = "afd09f9a6df14e32b6d832fd9f51d087"
+SRC_URI[sha256sum] = "a25f6281d64732892a2e838cc2346f1a88505b5c77a57a6540755362ea64043a"
 
 PV = "${RPIFW_DATE}"
 

recipes-bsp/rpi-u-boot-scr/files/boot.cmd.in

@@ -0,0 +1,3 @@
+fdt addr ${fdt_addr} && fdt get value bootargs /chosen bootargs
+fatload mmc 0:1 ${kernel_addr_r} @@KERNEL_IMAGETYPE@@
+@@KERNEL_BOOTCMD@@ ${kernel_addr_r} - ${fdt_addr}

recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb

@@ -1,13 +1,16 @@
 SUMMARY = "U-boot boot scripts for Raspberry Pi"
 LICENSE = "MIT"
 LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
-COMPATIBLE_MACHINE = "rpi"
+COMPATIBLE_MACHINE = "^rpi$"
 
 DEPENDS = "u-boot-mkimage-native"
 
-SRC_URI = "file://boot.cmd"
+SRC_URI = "file://boot.cmd.in"
 
 do_compile() {
+    sed -e 's/@@KERNEL_IMAGETYPE@@/${KERNEL_IMAGETYPE}/' \
+        -e 's/@@KERNEL_BOOTCMD@@/${KERNEL_BOOTCMD}/' \
+        "${WORKDIR}/boot.cmd.in" > "${WORKDIR}/boot.cmd"
     mkimage -A arm -T script -C none -n "Boot script" -d "${WORKDIR}/boot.cmd" boot.scr
 }