Joint JGI / KBASE ID Mapping Service

This repo contains the JGI / KBase ID Mapping Service (IMS). The service provides for mapping IDs in one namespace (e.g. NCBI) to another (e.g. JGI).

For example, the NCBI Refseq ID GCF_001598195.1 maps to the KBase CI ID 15792/22/3, so the service could store the mapping from the ID GCF_001598195.1 in the namespace NCBI Refseq to the ID 15792/22/3 in the namespace KBase CI, and vice versa.

Build status (master):

Abbreviations:

IMS - ID Mapping Service
JGI - Joint Genome Institute
CLI - Command Line Interface
CSL - Comma Separated List

Usage

Namespaces and mappings

A namespace is an arbitrary string consisting of the characters a-z, A-Z, 0-9, and _ with a maximum length of 256 characters. Once created by a system administrator, a namespace cannot be deleted. Namespaces may have any number of mappings associated with them, limited by the capacity of the database. It is expected, but not enforced, that the IMS will contain on the order of no more than 1000 namespaces.

A mapping is a tuple of (administrative namespace, administrative ID, namespace, ID) where IDs are arbitrary strings with a maximum length of 1000 characters. Namespace administrators are expected to load namespaces and mappings into the system that have appropriate semantics for their domain.

Namespaces may be publicly mappable, which means that anyone can associate the non-administrative portion of a mapping with the namespace. To create or delete a mapping, the user must always be an administrator of the administrative namespace (e.g. the first namespace in the mapping tuple). If neither namespace is publicly mappable, the user must be an administrator of both namespaces to create a mapping. To remove a mapping, the user need only be an administrator of the administrative namespace.

Mappings are public, and anyone can read them. Namespaces are publicly readable except for the administrator list, which is only readable by system administrators and other namespace administrators for that namespace.

Authentication in brief

To use the IMS's administration functions, a user must provide a valid token from an authentication source to the API. There are two levels of administration:

System administrators can create namespaces and add and remove administrators from namespaces.
Namespace administrators are assigned by system administrators and can change settings and create and remove mappings on the namespaces they administrate.

Reading namespaces and mappings requires no authentication or administration privileges.

Two authentication sources are provided (and more can be added via an extension mechanism):

local: Local user accounts and tokens are stored in the IMS database.
kbase: A KBase (https://kbase.us) authentication service is contacted to get authentication information.

See Authentication information below for more details on configuring, enabling, and extending authentication sources.

API

[Auth source] defines the source of authentication information, e.g. local, kbase, etc.

Root

GET /

RETURNS:
{"service": "ID Mapping Service",
 "version": <service version>,
 "gitcommithash": <git commit>,
 "servertime": <ms since epoch>
 }

Create a namespace

Requires the user to be a system administrator.

HEADERS:
Authorization: [Auth source] <token>

PUT /api/v1/namespace/<namespace>

POST is also accepted.

Add a namespace administrator to a namespace

Requires the user to be a system administrator.

HEADERS:
Authorization: [Auth source] <token>

PUT /api/v1/namespace/<namespace>/user/<authsource>/<username>

Remove a namespace administrator from a namespace

Requires the user to be a system administrator.

HEADERS:
Authorization: [Auth source] <token>

DELETE /api/v1/namespace/<namespace>/user/<authsource>/<username>

Alter namespace

Requires the user to be namespace administrator.

HEADERS:
Authorization: [Auth source] <token>

PUT /api/v1/namespace/<namespace>/set/?publicly_mappable=<true or false>

Show namespace

HEADERS (optional):
Authorization: [Auth source] <token>

GET /api/v1/namespace/<namespace>

RETURNS:
{"namespace": <namespace>,
 "publicly_mappable": <boolean>,
 "users": [<authsource>/<username>, ...]
 }

The users field is only populated if the Authorization header is supplied and the user is a namespace or system administrator.

List namespaces

GET /api/v1/namespace/

RETURNS:
{"publicly_mappable": [<namespace>, ...],
 "privately_mappable": [<namespace>, ...]
}

Create mappings

Requires the user to be namespace administrator for the administrative namespace. If the non-administrative namespace is not publicly mappable, the user must also be an administrator for that namespace.

HEADERS:
Authorization: [Auth source] <token>

PUT /api/v1/mapping/<administrative namespace>/<namespace>/
{<administrative id1>: <id1>,
 ...
 <administrative idN>: <idN>
 }

POST is also accepted, although not strictly correct.

A maximum of 10000 ids may be supplied.

List mappings

GET /api/v1/mapping/<namespace>/[?namespace_filter=<namespace CSL>][&separate]
{"ids": [<id1>, ..., <idN>]}

RETURNS:
if not separate:
    {<id1>: {"mappings" [{"ns": <namespace1_1>, "id": <id1_1>},
                          ...
                         {"ns": <namespace1_N>, "id": <id1_N>}
                         ]
             },
     ...
     <idN>: {"mappings" [{"ns": <namespaceN_1>, "id": <idN_1>},
                          ...
                         {"ns": <namespaceN_N>, "id": <idN_N>}
                         ]
             }
     }
else:
    {<id1>: {"admin": [{"ns": <namespace1_1>, "id": <id1_1>},
                        ...
                       {"ns": <namespace1_N>, "id": <id1_N>}
                       ],
             "other": [{"ns": <namespace1_N+1>, "id": <id1_N+1>},
                        ...
                       {"ns": <namespace1_N+M>, "id": <id1_N+M>}
                      ]
             },
      ...
     <idN>: {"admin": [{"ns": <namespaceN_1>, "id": <idN_1>},
                        ...
                       {"ns": <namespaceN_N>, "id": <idN_N>}
                       ],
             "other": [{"ns": <namespaceN_N+1>, "id": <idN_N+1>},
                        ...
                       {"ns": <namespaceN_N+M>, "id": <idN_N+M>}
                      ]
             },
     }

A maximum of 1000 ids may be supplied.

The mappings in the admin key are mappings where the provided half of the mapping is the administrative half - e.g. the namespace in the url is the administrative namespace in the mapping. Mappings in the other key denote mappings where the provided half of the mapping is not the administrative half.

Delete mappings

Requires the user to be a namespace administrator for the administrative namespace.

HEADERS:
Authorization: [Auth source] <token>

DELETE /api/v1/mapping/<administrative namespace>/<namespace>/
{<administrative id1>: <id1>,
 ...
 <administrative idN>: <idN>
 }

A maximum of 10000 ids may be supplied.

Requirements

Python 3.6+
MongoDB 2.6+
Make
git

The system is tested on Ubuntu, but should probably work on other operating systems.

Setup

Install the runtime dependencies
- pip install -r requirements.txt
Start MongoDB
From the IDMappingService repo:
- make
- Copy deploy.cfg.example to deploy.cfg and fill in the MongoDB parameters

Starting the service

IDMappingService$ export ID_MAPPING_CONFIG=/<path to repo parent directory>/IDMappingService/deploy.cfg

IDMappingService$ export PYTHONPATH=./src

IDMappingService$ gunicorn --worker-class gevent --timeout 300 --workers 17 --bind :5000 app:app
[2018-08-16 12:42:44 -0700] [4957] [INFO] Starting gunicorn 19.9.0
[2018-08-16 12:42:44 -0700] [4957] [INFO] Listening at: http://0.0.0.0:5000 (4957)
*snip*

Adding local users via the CLI

Local user administration is done via the id_mapper CLI tool. Execute id_mapper --help to get information about running the CLI. Example usage:

IDMappingService$ ./id_mapper --list-users
* indicates an administrator:

IDMappingService$ ./id_mapper --user myname1 --create
Created user myname1 with token:
ZAM0eUgKvWAoPkNHgEPjAckTw3Q=

IDMappingService$ ./id_mapper --user myname2 --create
Created user myname2 with token:
iAChByXJr3Og4gk+Ui/g03aMCLA=

IDMappingService$ ./id_mapper --user myname2 --admin true
Set user myname2's admin state to true.

IDMappingService$ ./id_mapper --user myname2 --new-token
Replaced user myname2's token with token:
FgG4OpIc1/7bx2V3fxUjRK0eV3w=

IDMappingService$ ./id_mapper --list-users
* indicates an administrator:
myname1
myname2 *

IDMappingService$ ./id_mapper --user myname2 --admin false
Set user myname2's admin state to false.

IDMappingService$ ./id_mapper --list-users
* indicates an administrator:
myname1
myname2

Authentication information

The service supports multiple sources of authentication and is extensible. There are two built in authentication sources: local and kbase. The local authentication source is the IMS database itself, where users can be created via the CLI as shown above. The kbase authentication source contacts a KBase authentication server to obtain authentication information.

Authentication sources are used to:

Get an immutable, permanent user ID given a token
Verify that user IDs are valid
Determine whether a user is a system administrator according to the authentication source.
- This behavior can be enabled or disabled on a per authentication source basis in the deploy.cfg file.

See the deploy.cfg.example file for more information regarding how to configure authentication sources.

Adding new authentication sources

To add a new authentication source:

Implement the jgikbase.idmapping.core.user_lookup.UserLookup interface.
1. get_authsource_id() must return an AuthsourceID with the same value as the name of the authsource in the deploy.cfg file. Legal authsource IDs consist solely of lowercase ASCII letters.
Implement a module level function called build_lookup that takes a Dict[str, str] of configuration parameters and returns a UserLookup instance for the authsource.
Configure the new authentication source in the deploy.cfg file.

See jgikbase.idmapping.userlookup.kbase_user_lookup and deploy.cfg.example for an example.

Note that the user ID allowed character list is currently fairly restrictive (lowercase ASCII letters and numbers) and may need adjustment for new authentication sources.

There exists a prototype authentication source implementation for JGI. This authsource should not be used in production. To configure the JGI authsource, enable the authsource in the authentication-enabled key, and add the following lines to the service's deploy.cfg file:

auth-source-jgi-factory-module=jgikbase.idmapping.userlookup.jgi_user_lookup_prototype
auth-source-jgi-init-url=https://signon.jgi.doe.gov

WARNINGS:

The JGI authsource does not account for the fact that user accounts can be merged. If a user account is merged, the user will lose access to any namespaces associated with the no longer usable account.
The JGI authsource uses integer user IDs as immutable IDs, as the user name is mutable. This means that JGI users returned in the API are not very readable. Displaying the user name as well is potentially difficult as many user names are presumably private email addresses.
There is currently no way to specify JGI users as system admins.
The JGI authsource is a prototype only and is undocumented and not automatically tested.
The JGI authentication service is not accessible by the public.

In summary, more design and implementation is needed before the JGI authsource is ready for production use, although it is a proof of concept.

Developer notes

Adding and releasing code

Adding code
- All code additions and updates must be made as pull requests directed at the develop branch.
  - All tests must pass and all new code must be covered by tests.
  - All new code must be documented appropriately
    - Sphinx code documentation
    - General documentation if appropriate
    - Release notes
Releases
- The master branch is the stable branch. Releases are made from the develop branch to the master branch.
- Update the version as per the semantic version rules in src/jgikbase/idmapping/service/mapper_service.py.
- Tag the version in git and github.

Running tests

Copy test.cfg.example to test.cfg and fill in the values appropriately.
- If it works as is start buying lottery tickets immediately.
make test

UI

Most text fields are arbitrary text entered by a data uploader. These fields should be HTML-escaped prior to display.

Use common sense when displaying a field from the server regarding whether the field should be html escaped or not.

Exception mapping

In jgikbase.idmapping.core.errors:
IDMappingError and subclasses other than the below - 400
AuthenticationError and subclasses - 401
UnauthorizedError and subclasses - 403
NoDataException and subclasses - 404

Other explicitly mapped errors:
json.decoder.JSONDecodeError - 400
werkzeug.exceptions.NotFound - 404
werkzeug.exceptions.MethodNotAllowed - 405

Anything else is mapped to 500.

TODO

travis
- try mongo 4 - maybe wait for a couple bugfix versions
integration tests with KBase auth server? - lot of work for little gain
if performance becomes an issue
- push the bulk operations further down the stack
- shard mongo
- swap the database implementation for something else (Cassandra?)
- needs some testing / optimization here
Delete all mappings from one namespace to another

Name		Name	Last commit message	Last commit date
Latest commit History 336 Commits
build		build
deployment/conf/.templates		deployment/conf/.templates
design		design
docsource		docsource
src		src
.travis.yml		.travis.yml
Dockerfile		Dockerfile
LICENSE.md		LICENSE.md
Makefile		Makefile
README.md		README.md
RELEASE_NOTES.md		RELEASE_NOTES.md
deploy.cfg.example		deploy.cfg.example
dev-requirements.txt		dev-requirements.txt
docker-compose.yml		docker-compose.yml
id_mapper		id_mapper
mypy.ini		mypy.ini
requirements.txt		requirements.txt
test.cfg.example		test.cfg.example
tox.ini		tox.ini

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Joint JGI / KBASE ID Mapping Service

Abbreviations:

Usage

Namespaces and mappings

Authentication in brief

API

Root

Create a namespace

Add a namespace administrator to a namespace

Remove a namespace administrator from a namespace

Alter namespace

Show namespace

List namespaces

Create mappings

List mappings

Delete mappings

Requirements

Setup

Starting the service

Adding local users via the CLI

Authentication information

Adding new authentication sources

Developer notes

Adding and releasing code

Running tests

UI

Exception mapping

TODO

About

Releases

Packages

Languages

License

MrCreosote/IDMappingService

Folders and files

Latest commit

History

Repository files navigation

Joint JGI / KBASE ID Mapping Service

Abbreviations:

Usage

Namespaces and mappings

Authentication in brief

API

Root

Create a namespace

Add a namespace administrator to a namespace

Remove a namespace administrator from a namespace

Alter namespace

Show namespace

List namespaces

Create mappings

List mappings

Delete mappings

Requirements

Setup

Starting the service

Adding local users via the CLI

Authentication information

Adding new authentication sources

Developer notes

Adding and releasing code

Running tests

UI

Exception mapping

TODO

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages