Skip to content

Latest commit

 

History

History
479 lines (374 loc) · 17.4 KB

CHANGELOG.rst

File metadata and controls

479 lines (374 loc) · 17.4 KB
Raw

Changelog for ned_ros_stack

v5.5.2

Features

Improvements
  • perf: add send_buffer_limit rosarg in foxglove spawner
Bugfixes
  • fix: use forward_kinematics_v2 in __ros_poses_from_robot_positions
  • fix: DXL' PIDs adjustments

v5.5.1

Features

Improvements
  • Increase error threshold for joints out of bounds detection in order to match hardware limits
  • Added topic '/niryo_robot/max_acceleration_scaling_factor' to check current acceleration percentage
  • Refacto of the wifi button handling: the names reflects its real job, which is managing solely the hotspot
  • Disabled torque of steppers not being calibrated during factory calibration
Bugfixes
  • Fixed a bug while setting acceleration from the '/niryo_robot_arm_commander/set_acceleration_factor' service which always set it to 40%
  • Fixed the conveyors direction which was inverted in the modbus server
  • Fixed PoseMetada.from_dict which wasn't passing the 'frame' argument when using a PoseMetadata.v1
  • Fixed collision thresholds settings which was not correctly calling the setting of the 2nd threshold and with the wrong datatype
  • Fixed a bug in __hotspot_state_callback which still processed the API response even if the request failed
  • Fixed tools transforms for Ned3 pro
  • Fix a missing offset in the URDF for Ned3 pro
  • Fixed a goal tolerance too low for the joint 1

v5.5.0

Features
  • Add sentry for python nodes
  • Add Ned3 demo/production program
Improvements
  • Add program player single point of control safety, * Program player is running a program and it's disconnected program stops * Program running without program player and one is connected program stops
  • Add PID and vel/acc profiles configurations for the grippers and configure them on initialization
  • Display stop message for player one when a program is stopped
  • Rename ned3 to ned3pro
Bugfixes
  • Add retrocompability get pose
  • Add retrocompability get list of trajectories
  • Add missing inverse_kinematics_v2() function in ROS wrapper and tag forward_kinematics() and inverse_kinematics() as deprecated
  • Velocity and acceleration motor profiles are scaled when scaling the robot velocity and synced with moveit scaling
  • Add save pose compatibility with legacy poses
  • Ill-formatted trajectories, poses, workspaces and dynamic frames won't make the stack crash
  • Add TCP server support for vacuum pump v2
  • Remove a collision checking in niryo_robot_arm_commander which was a duplicate of ROS control's joint trajectory controller
  • Created get_target_pose_v2 service in order to keep get_target_pose original behaviors
  • Created a foxglove spawner to start the bridge once the robot has finished booting. This prevents some errors that occurs with the clients
  • Remove move spiral demo Ned3
  • Reset home position service called uninitialized default_home_position vector, now it's well initialized

v5.4.0

Features
  • Implemented NED3 hardware changes into niryo_robot_rpi package
  • Add Ned3 Calibration support
  • Add support for Conveyor with ned3 stepper
  • Add support for vacuum pump v2
  • Add velocity and acceleration profile for vacuum pump v2
  • Change the robot's URDF in order to follow the Denavit-Hartenberg convention.
  • New Pose and JointsPosition
  • The /niryo_robot_arm_commander/robot_action action server can handle old and new TCP versions using tcp_version in ArmMoveCommand.msg
  • Edit niryo_robot_poses_handlers' grip files according to the new TCP orientation
  • Added pose_version and tcp_version to NiryoPose.msg
  • New generic classes designed to be the universal classes to represent the data:
    • JointsPosition
    • JointsPositionMetadata
    • Pose
    • PoseMetadata
  • New niryo_robot_poses_handlers/transform_functions functions: convert_legacy_rpy_to_dh_convention() and convert_dh_convention_to_legacy_rpy()
  • New ros_wrapper.NiryoRosWrapper functions which can't take either Pose or JointsPosition objects:
    • move replace move_joints, move_pose and move_linear_pose.
    • jog_shift, replace jog_joints_shift and jog_pose_shift.
    • pick, replace pick_from_pose.
    • place, replace place_from_pose.
    • execute_trajectory, replace execute_trajectory_from_poses and execute_trajectory_from_poses_and_joints.
    • compute_trajectory, replace compute_trajectory_from_poses and compute_trajectory_from_poses_and_joints.
  • New TCP server commands: GET_COLLISION_DETECTED, CLEAR_COLLISION_DETECTED, HANDSHAKE, MOVE, JOG, PICK, PLACE, EXECUTE_TRAJECTORY
  • New tools translation transforms according to the new TCP orientation
  • Add Hardware ID to the conveyors, only for v2 and v3
  • The new robot pose is published on /niryo_robot/robot_state_v2 in order to keep compatibility with older NiryoStudios
  • The new robot relative pose is published on /niryo_robot_poses_handlers/relative_pose_v2 in order to keep compatibility with older NiryoStudios
  • Add a service to get conveyor hardware ID to be able to differentiate them (conveyor v2 and v3), service name: /niryo_robot/conveyor/get_hardware_id
  • Add services to get forward and inverse kinematics using the new TCP convention (Z axis pointing forward)
  • Add a ROS wrapper function to get the forward kinematics using the new TCP convention (Z axis pointing forward)
  • Add a ROS topic /niryo_robot_tools_commander/tcp_v2 which publishes the transform from hand_link to the TCP following the new TCP convention
  • Change robot's pose limits for Ned3 to match its reachability
Improvements
  • Use the I/O panel version instead of the robot hardware version to differentiate the implementations
  • Created a set of classes gpio_expander_adapters. Theses classes are adapters in order to handle GPIOs the same way MCP IOs are handled
  • Update of the DACx0501 driver
  • NiryoRosWrapper.vision_pick now can take an optional observation pose obs_pose
  • Add speed limit pourcentage for the conveyor
  • When a tool stops moving, a position-holding command is sent instead of resending the command with the max position, drastically reducing temperature rise
  • Update dynamixels PID (Axis 4 to 6)
Bugfixes
  • Stopping a program now send SIGTERM and then SIGKILL after 3 seconds if the program didn't exit gracefully
  • Grasp and release actions now use a feedback to check if they finished their motion instead of stopping after a fixed time
  • Debounce emergency stop resume to avoid to resume on small 12v spikes
  • Renaming a dynamic frame also rename its name in the transform
  • NiryoRosWrapper.get_workspace_list no longer return an error
  • TCP server __send_answer_with_payload encode the payload only if it's not already encoded
  • Fix intermitent delay in the control loop caused by a ROS spinOnce call in the control loop

v5.3.3

Features

Improvements
  • Increase threshold for end effector collision detection

Bugfixes

v5.3.2

Features

Improvements

Bugfixes
  • Stopping a program now send SIGTERM instead of SIGKILL in order to let the program handle its exit

v5.3.1

Features

Improvements

Bugfixes
  • Fixed a bug which didn't handled when a goal was timed out in NiryoActionClient
  • Fixed a bug which could lead to the tool commander's action server to always be locked in active mode
  • Fixed a bug which prevented the tool commander action server to accept new goals once a goal with a future date was published

v5.3.0

Features

Improvements
  • Brand new modbus server
  • New ros_wrapper functions: get_current_tool_state, get_tcp, get_digital_io_mode, get_available_disk_size, get_ros_logs_size, control_video_stream
  • New system_api_client endpoint: get_system_version_current
Bugfixes
  • in ros_wrapper, __conveyor_id_to_conveyor_number no longer rely on the currently attached conveyors
  • fixed some incorrect ros_wrapper's docstring
  • fixed a bug which prevented to do vision picks with a TCP transformation enabled
  • fixed a bug which caused an executed program's process to not totally stop

v5.2.2

Features

Improvements
  • The service /niryo_robot/kinematics/forward now returns status and message in its response
  • The service /niryo_robot/kinematics/inverse now returns status and message in its response
Bugfixes
  • Fixed the service /niryo_robot/kinematics/forward which sometimes crashed because of transform extrapolation

v5.2.1

Features

Improvements

Bugfixes
  • the service set_program_autorun wasn't taking the mode into account when passing "DISABLE"

v5.2.0

Features
  • Added a foxglove bridge server
  • new messages: BasicObject and BasicObjectList
  • New topics: * /niryo_robot_arm_commander/trajectory_list (BasicObjectArray) * /niryo_robot_poses_handler/pose_list (BasicObjectArray) * /niryo_robot_poses_handler/dynamic_frame_list (BasicObjectArray)
  • New topic: /niryo_robot_poses_handlers/relative_pose * This topic publish the TCP pose relative to a dynamic frame
  • New service: /niryo_robot_poses_handlers/set_relative_transform_frame * Use this service to set the dynamic frame which should be used for the relative pose
  • New service: /niryo_robot_database/get_db_file_path * Use this service to retrieve the database file path
Improvements

  • Refacto of the programs manager * It now uses programs ids to handle the programs * A program is now defined as a python program which can have a blockly program attached * An action server is used to execute a program rather than a service * The autorun and the programs properties are stored in the database * Named programs_manager_v2 in order to keep the old programs manager for NS1

  • The service GetNameDescription takes an array of BasicObject (for future compatibility)

  • remove ros_wrapper_2

  • modified service type: * /niryo_robot/tools/reboot

    • std_srvs/Trigger -> niryo_robot_msgs/Trigger
    • /niryo_robot_vision/debug_markers * Added "status" and "message" to service response
    • /niryo_robot_vision/debug_colors * Added "status" and "message" to service response
    • /niryo_robot_vision/visualization * Added "message" to service response
Bugfixes
  • Removed double assignment of the const REBOOT_MOTOR in RobotStatus.msg

v5.1.3

Features

Improvements
  • Added a field "saved_at" in the service /niryo_robot_programs_manager/get_program response

Bugfixes

v5.1.2

Features

Improvements
  • The daily reports can now send metrics about the robot. Currently, the total lifetime of the robot is sent

Bugfixes

v5.1.1

Features

Improvements
  • Revamped WiFi button functionalities: Brief press (< 2s) toggles hotspot; Extended press (> 2s) enables/disables WiFi client; Long press (> 7s) restores network settings. To abort, press for over 10 seconds.
  • WiFi button press triggers LED ring indication for forthcoming action.
  • The database node use the system software HTTP API to get and set the settings in the database. This is to ensure there is only one access point to the database.
  • Reduced the grippers open / close torque to slow down the motor's heating
Bugfixes
  • Resolved an issue where the hotspot failed to initiate concurrently with the WiFi client.
  • Fixed a bug that consistently disregarded the "purge ros logs on startup" command.
  • Fixed a problem that sometimes stopped the camera from recognizing colored shapes.
  • Fixed an issue that permitted editing of dynamic frames belonging to workspaces.
  • Rectified dynamic frame editing by implementing quaternion normalization.
  • Fixed a bug that caused the vision picks to catch objects by their corners.

v5.1.0

Features

  • The topic /niryo_robot_tools_commander/tcp now return the tcp position either if it is enabled or not
  • Every part of a dynamic frame can now be edited using the service /niryo_robot_poses_handlers/manage_dynamic_frame
  • Manage a file in ~/.ros/logs which store the date corresponding to the ros run ids

Improvements

Bugfixes

v5.0.1

Features Improvements

Bugfixes * Fixed a bug preventing the downloaded update to be applied successfully

Forthcoming

Requirements sudo apt-get install sqlite3 End effector driver fw 1.0.7

Bug corrections

Features * add VERSION file at root * add CHANGELOG.rst in every package (using catkin_generate_changelog tool) * add this changelog * fix calibration for Ned and One * add documentation strucutre (sphinx doc) * update PID values for DXL (ned2) * update joints_interface and ttl_driver read and write frequencies

Limitations

  • Contributors: AdminIT, Clément Cocquempot, Corentin Ducatez, Minh Thuc, Mottier Justin, Thuc PHAM, Valentin Pitre, f.dupuis

ned2_v0.6 (2021-12-02)

Requirements

  • steppers driver with fw 1.0.16
  • gtts (pip install gTTS)

Bug corrections

  • slower movements
  • wrong conveyor feedback
  • drivers optimised (using more precise velocity for steppers profiles)
  • error connection better handled (resolve pb of read blocked for end effector mainly)
  • new urdf for ned2
  • missing firmware version sometimes corrected
  • wrong conversion for axis 6 for Ned
  • end effector input
  • warn end effector at startup
  • rework of bringup to simplify it

Features

  • Compatibility Ned and One
  • Calibration ok
  • Retrieve firmware
  • last PID in place
  • last velocity profiles for steppers
  • voltage and temperature for all hw
  • documentation structure set up for the stack
  • option simu_gripper and simu_conveyor added for simulation
  • remove service GetFrequencies and SetFrequencies
  • script prod
  • script videoshoot
  • urdf + collada + stl ned2
  • circular trajectories
  • spirals trajectories
  • Save and Replay waypointed trajectories
  • Google Text to speech

Limitations

  • You need to update your steppers drivers to version 1.16
  • control mode bug if the stack is launch with a tool connected
  • no blinking of the led ring when there is a motor error or an error message in topic hardware_status (to avoid blinking for nothing)
  • manual calibration not working

Tests done (will be updated) Non tested (will be updated)

ned2_v0.5 (2021-11-25)

Bug corrections

  • less jerky mouvments
  • stabilised reboot
  • security on moveit
  • pb out of bond corrected

Features

  • Compatibility Ned and One
  • last PID in place
  • last velocity and acceleration profiles

Limitations

  • connection loss from time to time, linked to bus pb (corrected in new cards, stand by for now)

Tests done

  • compilation
  • calibration Ned2

Non tested (will be updated)

  • all accessories, grippers and conveyors
  • blockly
  • Ned, one simu

ned2_v0.4 (2021-11-17)

Features

  • Calibration reworked, more stable, slower
  • Initializations rework
  • Queues protection
  • Sync read fail corrected on End Effector
  • Error messages enhanced
  • Version, Temperature and voltage addition on Tools and Conveyors
  • Calibration status kept if motors are not shutdown

Limitations

  • Not tested with conveyor
  • Control mode fail on gripper
  • Reboot fail (unexpected movements during reboot)
  • Joints limits to update
  • Broken simulation
  • Ned and one incompatible

ned2_v0.3 (2021-11-08)

Bug Corrections

  • correction in joints_limit.yaml
  • remove end effector read status when robot moving (check if collision is still read...)
  • smoother movement
  • read firmware version only at init

ned2_v0.2 (2021-11-04)

Bug corrections

  • smoother movements
  • conveyor fixes (to be tested)
  • last additions from valentin
  • cross compilation rpi4 pk

Limitations

  • Carefull : ned and one compatibility broken

3.2.0 (2021-09-23)

  • Merge branch 'develop' into 'master' v3.2.0 See merge request niryo/niryo-one-s/ned_ros_stack!113
  • Release September: v3.2.0
  • Merge branch 'release_language_versions' into 'develop' Release language versions See merge request niryo/niryo-one-s/ned_ros_stack!62
  • Release language versions
  • Merge branch 'Bug_fix_gripper3' into 'develop' Bug fix gripper3 See merge request niryo/niryo-one-s/ned_ros_stack!26
  • v3.1.1: Bug fix gripper3
  • Change versions in package.xml to 3.1.0
  • Contributors: Ducatez Corentin, corentin ducatez

ned2_v0.1 (2021-09-21)

  • Stable version usable for Ned 2 testing
  • Be carefull, usable only with niryo studio tag ned2_v0.1

3.1.2 (2021-08-13)

3.1.1 (2021-06-21)

  • v3.1.1: Fix grip offset for gripper3 (vision pick)
  • Merge branch 'develop' into 'master' Release v3.1.0 See merge request niryo/niryo-one-s/ned_ros_stack!9
  • Release v3.1.0
  • Contributors: Corentin Ducatez, Ducatez Corentin

3.1.0 (2021-05-06)

  • Change versions in package.xml to 3.1.0
  • Contributors: corentin ducatez

3.0.0 (2021-01-25)