NAVDatabase.Amx.PanasonicDisplay

---

---

AMX NetLinx module for Panasonic displays.

Contents 📖

• Installation ⚡
• Usage 🚀
• Team ⚽
• Contributors ✨
• LICENSE ⚖️

Installation ⚡

This module can be installed using Scoop.

scoop bucket add norgateav-amx https://github.com/Norgate-AV/scoop-norgateav-amx
scoop install navdatabase-amx-panasonic-display

Usage 🚀

DEFINE_DEVICE

// The real device
dvPanasonicDisplay              = 5001:1:0          // Serial/RS232 Connection

// or
// dvPanasonicDisplay           = 0:4:0             // IP/Socket Connection

// Virtual Devices
vdvPanasonicDisplay             = 33201:1:0         // The interface between the device and the control system

// User Interface
dvTP                            = 10001:1:0         // Main UI


define_module 'mPanasonicDisplay' PanasonicDisplayComm(vdvPanasonicDisplay, dvPanasonicDisplay)


DEFINE_EVENT

data_event[vdvPanasonicDisplay] {
    online: {
        // If using IP/Socket Connection
        // send_command data.device, "'PROPERTY-IP_ADDRESS,', '192.168.1.21'"

        // Set an alternative baud rate for serial connection. Default is 9600
        // send_command data.device, "'PROPERTY-BAUD_RATE,', '38400'"

        // send_command data.device, "'PROPERTY-USER_NAME,', 'dispadmin'"
        // send_command data.device, "'PROPERTY-PASSWORD,', '@Panasonic'"
    }
}


// Trigger power state
button_event[dvTP, 1]
button_event[dvTP, 2] {
    push: {
        switch (button.input.channel) {
            case 1: {
                pulse[vdvPanasonicDisplay, PWR_ON]

                // or
                send_command vdvPanasonicDisplay, "'POWER-ON'"
            }
            case 2: {
                pulse[vdvPanasonicDisplay, PWR_OFF]

                // or
                send_command vdvPanasonicDisplay, "'POWER-OFF'"
            }
        }
    }
}


// Trigger input switch
button_event[dvTP, 11]
button_event[dvTP, 12] {
    push: {
        // Triggering an input switch will automatically turn the display on
        // and switch to the selected input
        switch (button.input.channel) {
            case 11: {
                send_command vdvPanasonicDisplay, "'INPUT-HDMI,1'"
            }
            case 12: {
                send_command vdvPanasonicDisplay, "'INPUT-HDMI,2'"
            }
        }
    }
}

Team ⚽

This project is maintained by the following person(s) and a bunch of awesome contributors.

Damien Butt

Contributors ✨

Thanks go to these awesome people (emoji key):

This project follows the all-contributors specification. Contributions of any kind are welcome!

LICENSE ⚖️

MIT