Yakt-v17

Changelog:

• Improved code readability
• Set swappiness to 60% to reduce cpu overhead
• Added scheduler tweaks back
• Disabled TCP timestamps to reduce overhead
• Enabled TCP low latency mode
• Set kernel.perf_cpu_time_max_percent to 10 to reduce cpu overhead
• Enabled CRF by default

Download: https://www.pling.com/p/1913001/
Mirror: https://www.opendesktop.org/p/1913001/

If you appreciate my efforts, kindly consider supporting me with a small contribution for a coffee. Your generosity would mean a lot!
Here is the link: http://notzeetaa.github.io/Donate-NotZeetaa

Yakt-v16

Changelog:

• Reverted "Set the priority for most essential processes to -20 (highest priority)" (Not recommended).
• Tweaked swappiness for higher/less or equal 8GB of RAM devices (To avoid cpu overhead).
• Updated variable names (Better code reading).
• Nuked watermark tweak (Useless and might cause some issues on newer kernel versions).
• Nuked phantom processing tweak (This is only recommended when slmk is present).
• Increased perf_cpu_time_max_percent to 20 (In order to save power).
• Increased up_rate_limit_us (In order to save power).

Download: https://www.pling.com/p/1913001/
Mirror: https://www.opendesktop.org/p/1913001/

If you appreciate my efforts, kindly consider supporting me with a small contribution for a coffee. Your generosity would mean a lot!
Here is the link: http://notzeetaa.github.io/Donate-NotZeetaa

Yakt-v15

Changelog:

• Improved log creation for optimization.
• Implemented log debugging (Disabled by default).
• Introduced a variable for Android Version output.
• Disabled phantom processing (Applicable to Android 12 and later).
• Temporarily removed scheduler tweaks.
• Omitted read_head tweaks.
• Set the priority of most critical processes to -20 (highest priority).
• Defaulted to disabling ECN negotiation.

Download: https://www.pling.com/p/1913001/
Mirror: https://www.opendesktop.org/p/1913001/

If you appreciate my efforts, kindly consider supporting me with a small contribution for a coffee. Your generosity would mean a lot!
Here is the link: http://notzeetaa.github.io/Donate-NotZeetaa

Yakt-v14

Changelog:

• Reapplied Google's schedutil rate-limits from Pixel 3.
• Disabled the grouping tasks tweak.
• Adjusted sched_min_granularity_ns.
• Removed the sched_latency_ns tweak.
• Fine-tuned sched_wakeup_granularity_ns.
• Increased the stat_interval tweak twofold (To mitigate system overhead).
• Elevated the dirty_ratio tweak (Aiming to enhance performance by reducing the frequency of disk writes).
• Removed unnecessary sleep commands as they serve no purpose.
• Omitted the extfrag tweak (As it didn't yield noticeable improvements).

Download: https://www.pling.com/p/1913001/
Mirror: https://www.opendesktop.org/p/1913001/

If you appreciate my efforts, kindly consider supporting me with a small contribution for a coffee. Your generosity would mean a lot!
Here is the link: http://notzeetaa.github.io/Donate-NotZeetaa

Yakt-v13

Changelog:

• Disabled CRF (Lets don't overhead CPU too much).
• Reduced nr_request (Lets prioritize latency here).
• Reduced sched_nr_migrate (Reduces the scheduler latency).
• Increased dirty_ratio (Don't block writeback too often).
• Changelog log path to /data/adb/modules/YAKT/yakt.log

Download: https://www.pling.com/p/1913001/
Mirror: https://www.opendesktop.org/p/1913001/

Yakt-v12

Changelog:

• Changed log generation script and improved it (Thx to @CRANKV2).
• Set kernel.perf_cpu_time_max_percent to 10(In order to reduce latency).
• Removed UFS Turbo Tweak(Wastes too much power and its not smart doing it).
• Increased SCHED_PERIOD(To improve scheduler performance in cost of latency).
• Increased sched_nr_migrate(To improve scheduler performance in cost of latency).
• Tweaked dirty_ratio.
• Increased vfs_cache_pressure(In order to reduce latency).

Download: https://www.pling.com/p/1913001/
Mirror: https://www.opendesktop.org/p/1913001/

Yakt-v11

Changelog:

• Fixed log path (Not being created).
• Enabled Power Efficient by default (In order to reduce power usage).
• Clean up (Removed unused variables).
• Removed Blkio tweak (Not a significant change).
• Removed watermark_scale_factor tweak (We disable watermark_boost_factor so watermark_scale_factor is useless to tweak).
• Enabled CRF by default (It can decrease system latency but may increase cpu usage).

Download: https://www.pling.com/p/1913001/
Mirror: https://www.opendesktop.org/p/1913001/

Yakt-v10

Changelog:

• Use a "smarter way" to tweak scheduler
• Tweaked sched_nr_migrate (For less latency)
• Cleaned up zswap tweak log
• Reduced stat_interval to 15 (For a bit less latency)
• Hardcoded swappiness to 100
• Increased nr_requests to 256 (For a better scheduler performance)

Download: https://www.pling.com/p/1913001/
Mirror: https://www.opendesktop.org/p/1913001/

Yakt-v9

Changelog:

• Boot time to apply tweak 60s -> 30s
• Increased vfs_cache_pressure to 40 (This to avoid out-of-memory conditions)
• Nuked Google's schedutil rate-limits from Pixel 3 (This is old and doesn't make sense using ir on newer devices)
• Disabled swap readahead completely
• Increased kernel.perf_cpu_time_max_percent to 40 (This might increase performance)

Download: https://www.pling.com/p/1913001/
Mirror: https://www.opendesktop.org/p/1913001/

Yakt-v8

Changelog:

• Disabled proactive compaction by default.
• Removed fast socket open tweak.
• Disabled timer migration (Reduces latency).
• Set kernel.perf_cpu_time_max_percent to 15 (This might increase a bit of performance).
• Force disable watermark boost (This just wastes memory).

Download: https://www.pling.com/p/1913001/
Mirror: https://www.opendesktop.org/p/1913001/