doc(CDCL): Document the CDCL-Tableaux solver #995
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This is a documentation-only patch for the CDCL-Tableaux solver. There is not much additional documentation for the pure CDCL solver, except regarding the use of the `tatoms_queue` as an intermediate place to hold decided and (clause) propagated atoms before performing theory propagations in bulk. The CDCL solver is heavily based on miniSAT, and hence http://www.decision-procedures.org/handouts/MiniSat.pdf is probably a better documentation at a high level than anything we could write.
|
Build failure is infamous |
|
@Halbaroth can we merge this? |
Halbaroth
approved these changes
Dec 12, 2023
bclement-ocp
added a commit
to bclement-ocp/opam-repository
that referenced
this pull request
Sep 24, 2024
CHANGES: ### Command-line interface - Enable FPA theory by default (OCamlPro/alt-ergo#1177) - Remove deprecated output channels (OCamlPro/alt-ergo#782) - Deprecate the --use-underscore since it produces models that are not SMT-LIB compliant (OCamlPro/alt-ergo#805) - Add --dump-models-on to dump models on a specific output channel (OCamlPro/alt-ergo#838) - Use consistent return codes (OCamlPro/alt-ergo#842) - Add --continue-on-error flag to set the SMT-LIB error behavior (OCamlPro/alt-ergo#853) - Make dolmen the default value for the --frontend option (OCamlPro/alt-ergo#857) - Restore functionality to broken `--profiling` option (OCamlPro/alt-ergo#947) - Add bare-bones support for interactive input in SMT-LIB format (OCamlPro/alt-ergo#949) - Less confusing behavior on timeout (OCamlPro/alt-ergo#982, OCamlPro/alt-ergo#984) - Add `--strict` option for SMT-LIB compliant mode (OCamlPro/alt-ergo#916, OCamlPro/alt-ergo#1133) - Deprecate `sum`, `typing` and `warnings` debug flags (OCamlPro/alt-ergo#1204) ### SMT-LIB support - Add support for the many new SMT-LIB commands (OCamlPro/alt-ergo#837, OCamlPro/alt-ergo#848, OCamlPro/alt-ergo#852, OCamlPro/alt-ergo#863, OCamlPro/alt-ergo#911, OCamlPro/alt-ergo#942, OCamlPro/alt-ergo#945, OCamlPro/alt-ergo#961, OCamlPro/alt-ergo#975, OCamlPro/alt-ergo#1069) - Expose the FPA rounding builtin in the SMT-LIB format (OCamlPro/alt-ergo#876, OCamlPro/alt-ergo#1135) - Allow changing the SAT solver using (set-option) (OCamlPro/alt-ergo#880) - Add support for the `:named` attribute (OCamlPro/alt-ergo#957) - Add support for quoted identifiers (OCamlPro/alt-ergo#909, OCamlPro/alt-ergo#972) - Add support for naming lemmas in SMT-LIB syntax (OCamlPro/alt-ergo#1141, OCamlPro/alt-ergo#1143) ### Model generation - Use post-solve SAT environment in model generation, fixing issues where incorrect models were generated (OCamlPro/alt-ergo#789) - Restore support for records in models (OCamlPro/alt-ergo#793) - Use abstract values instead of dummy values in models where the actual value does not matter (OCamlPro/alt-ergo#804, OCamlPro/alt-ergo#835) - Use fresh names for all abstract values to prevent accidental captures (OCamlPro/alt-ergo#811) - Add support for model generation with the default CDCL solver (OCamlPro/alt-ergo#829) - Support model generation for the BV theory (OCamlPro/alt-ergo#841, OCamlPro/alt-ergo#968) - Add support for optimization (MaxSMT / OptiSMT) with lexicographic Int and Real objectives (OCamlPro/alt-ergo#861, OCamlPro/alt-ergo#921) - Add a SMT-LIB printer for expressions (OCamlPro/alt-ergo#952, OCamlPro/alt-ergo#981, OCamlPro/alt-ergo#1082, OCamlPro/alt-ergo#931, OCamlPro/alt-ergo#932) - Ensure models have a value for all constants in the problem (OCamlPro/alt-ergo#1019) - Fix a rare soundness issue with integer constraints when model generation is enabled (OCamlPro/alt-ergo#1025) - Support model generation for the ADT theory (OCamlPro/alt-ergo#1093, OCamlPro/alt-ergo#1153) ### Theory reasoning - Add word-level propagators for the BV theory (OCamlPro/alt-ergo#944, OCamlPro/alt-ergo#1004, OCamlPro/alt-ergo#1007, OCamlPro/alt-ergo#1010, OCamlPro/alt-ergo#1011, OCamlPro/alt-ergo#1012, OCamlPro/alt-ergo#1040, OCamlPro/alt-ergo#1044, OCamlPro/alt-ergo#1054, OCamlPro/alt-ergo#1055, OCamlPro/alt-ergo#1056, OCamlPro/alt-ergo#1057, OCamlPro/alt-ergo#1065, OCamlPro/alt-ergo#1073, OCamlPro/alt-ergo#1144, OCamlPro/alt-ergo#1152) - Add interval domains and arithmetic propagators for the BV theory (OCamlPro/alt-ergo#1058, OCamlPro/alt-ergo#1083, OCamlPro/alt-ergo#1084, OCamlPro/alt-ergo#1085) - Native support for bv2nat of bit-vector normal forms (OCamlPro/alt-ergo#1154) - Fix incompleteness issues in the BV solver (OCamlPro/alt-ergo#978, OCamlPro/alt-ergo#979) - Abstract more arguments of AC symbols to avoid infinite loops when they contain other AC symbols (OCamlPro/alt-ergo#990) - Do not make irrelevant decisions in CDCL solver, improving performance slightly (OCamlPro/alt-ergo#1041) - Rewrite the ADT theory to use domains and integrate the enum theory into the ADT theory (OCamlPro/alt-ergo#1078, OCamlPro/alt-ergo#1086, OCamlPro/alt-ergo#1087, OCamlPro/alt-ergo#1091, OCamlPro/alt-ergo#1094, OCamlPro/alt-ergo#1138) - Rewrite the Intervals module entirely (OCamlPro/alt-ergo#1108) - Add maximize/minimize terms for matching (OCamlPro/alt-ergo#1166) - Internalize `sign_extend` and `repeat` (OCamlPro/alt-ergo#1192) - Run cross-propagators to completion (OCamlPro/alt-ergo#1221) - Support binary distinct on arbitrary bit-widths (OCamlPro/alt-ergo#1222) - Only perform optimization when building a model (OCamlPro/alt-ergo#1224) - Make sure domains do not overflow the default domain (OCamlPro/alt-ergo#1225) - Do not build unnormalized values in `zero_extend` (OCamlPro/alt-ergo#1226) ### Internal/library changes - Rewrite the Vec module (OCamlPro/alt-ergo#607) - Move printer definitions closer to type definitions (OCamlPro/alt-ergo#808) - Mark proxy names as reserved (OCamlPro/alt-ergo#836) - Use a Zarith-based representation for numbers and bit-vectors (OCamlPro/alt-ergo#850, OCamlPro/alt-ergo#943) - Add native support for (bvnot) in the BV solver (OCamlPro/alt-ergo#856) - Add constant propagators for partially interpreted functions (OCamlPro/alt-ergo#869) - Remove `Util.failwith` in favor of `Fmt.failwith` (OCamlPro/alt-ergo#872) - Add more `Expr` smart constructors (OCamlPro/alt-ergo#877, OCamlPro/alt-ergo#878) - Do not use existential variables for integer division (OCamlPro/alt-ergo#881) - Preserve `Subst` literals to prevent accidental incompleteness (OCamlPro/alt-ergo#886) - Properly start timers (OCamlPro/alt-ergo#924) - Compute a concrete representation of a model instead of performing (OCamlPro/alt-ergo#925) - Allow direct access to the SAT API in the Alt-Ergo library computations during printing (OCamlPro/alt-ergo#927) - Better handling for step limit (OCamlPro/alt-ergo#936) - Add a generic option manager to deal with the dolmen state (OCamlPro/alt-ergo#951) - Expose an imperative SAT API in the Alt-Ergo library (OCamlPro/alt-ergo#962) - Keep track of the SMT-LIB mode (OCamlPro/alt-ergo#971) - Add ability to decide on semantic literals (OCamlPro/alt-ergo#1027, OCamlPro/alt-ergo#1118) - Preserve trigger order when parsing quantifiers with multiple trigger (OCamlPro/alt-ergo#1046). - Store domains inside the union-find module (OCamlPro/alt-ergo#1119) - Remove some polymorphic hashtables (OCamlPro/alt-ergo#1219) ### Build and integration - Drop support for OCaml <4.08.1 (OCamlPro/alt-ergo#803) - Use dune-site for the inequalities plugins. External pluginsm ust now be registered through the dune-site plugin mechanism in the `(alt-ergo plugins)` site to be picked up by Alt-Ergo (OCamlPro/alt-ergo#1049). - Add a release workflow (OCamlPro/alt-ergo#827) - Add a Windows workflow (OCamlPro/alt-ergo#1203) - Mark the dune.inc file as linguist-generated to avoid huge diffs (OCamlPro/alt-ergo#830) - Use GitHub Actions badges in the README (OCamlPro/alt-ergo#882) - Use `dune build @check` to build the project (OCamlPro/alt-ergo#887) - Enable warnings as errors on the CI (OCamlPro/alt-ergo#888) - Uniformization of internal identifiers generation (OCamlPro/alt-ergo#905, OCamlPro/alt-ergo#918) - Use an efficient `String.starts_with` implementation (OCamlPro/alt-ergo#912) - Fix the Makefile (OCamlPro/alt-ergo#914) - Add `Logs` dependency (OCamlPro/alt-ergo#1206) - Use `dynamic_include` to include the generated file `dune.inc` (OCamlPro/alt-ergo#1199) - Support Windows (OCamlPro/alt-ergo#1184,OCamlPro/alt-ergo#1189,OCamlPro/alt-ergo#1195,OCamlPro/alt-ergo#1199,OCamlPro/alt-ergo#1200) - Wrap the library `Alt_ergo_prelude` (OCamlPro/alt-ergo#1223) ### Testing - Use --enable-assertions in tests (OCamlPro/alt-ergo#809) - Add a test for push/pop (OCamlPro/alt-ergo#843) - Use the CDCL solver when testing model generation (OCamlPro/alt-ergo#938) - Do not test .smt2 files with the legacy frontend (OCamlPro/alt-ergo#939) - Restore automatic creation of .expected files (OCamlPro/alt-ergo#941) ### Documentation - Add a new example for model generation (OCamlPro/alt-ergo#826) - Add a Pygments lexer for the Alt-Ergo native language (OCamlPro/alt-ergo#862) - Update the current authors (OCamlPro/alt-ergo#865) - Documentation of the `Enum` theory (OCamlPro/alt-ergo#871) - Document `Th_util.lit_origin` (OCamlPro/alt-ergo#915) - Document the CDCL-Tableaux solver (OCamlPro/alt-ergo#995) - Document Windows support (OCamlPro/alt-ergo#1216) - Remove instructions to install Alt-Ergo on Debian (OCamlPro/alt-ergo#1217) - Document optimization feature (OCamlPro/alt-ergo#1231)
tjammer
pushed a commit
to tjammer/opam-repository
that referenced
this pull request
Sep 24, 2024
CHANGES: ### Command-line interface - Enable FPA theory by default (OCamlPro/alt-ergo#1177) - Remove deprecated output channels (OCamlPro/alt-ergo#782) - Deprecate the --use-underscore since it produces models that are not SMT-LIB compliant (OCamlPro/alt-ergo#805) - Add --dump-models-on to dump models on a specific output channel (OCamlPro/alt-ergo#838) - Use consistent return codes (OCamlPro/alt-ergo#842) - Add --continue-on-error flag to set the SMT-LIB error behavior (OCamlPro/alt-ergo#853) - Make dolmen the default value for the --frontend option (OCamlPro/alt-ergo#857) - Restore functionality to broken `--profiling` option (OCamlPro/alt-ergo#947) - Add bare-bones support for interactive input in SMT-LIB format (OCamlPro/alt-ergo#949) - Less confusing behavior on timeout (OCamlPro/alt-ergo#982, OCamlPro/alt-ergo#984) - Add `--strict` option for SMT-LIB compliant mode (OCamlPro/alt-ergo#916, OCamlPro/alt-ergo#1133) - Deprecate `sum`, `typing` and `warnings` debug flags (OCamlPro/alt-ergo#1204) ### SMT-LIB support - Add support for the many new SMT-LIB commands (OCamlPro/alt-ergo#837, OCamlPro/alt-ergo#848, OCamlPro/alt-ergo#852, OCamlPro/alt-ergo#863, OCamlPro/alt-ergo#911, OCamlPro/alt-ergo#942, OCamlPro/alt-ergo#945, OCamlPro/alt-ergo#961, OCamlPro/alt-ergo#975, OCamlPro/alt-ergo#1069) - Expose the FPA rounding builtin in the SMT-LIB format (OCamlPro/alt-ergo#876, OCamlPro/alt-ergo#1135) - Allow changing the SAT solver using (set-option) (OCamlPro/alt-ergo#880) - Add support for the `:named` attribute (OCamlPro/alt-ergo#957) - Add support for quoted identifiers (OCamlPro/alt-ergo#909, OCamlPro/alt-ergo#972) - Add support for naming lemmas in SMT-LIB syntax (OCamlPro/alt-ergo#1141, OCamlPro/alt-ergo#1143) ### Model generation - Use post-solve SAT environment in model generation, fixing issues where incorrect models were generated (OCamlPro/alt-ergo#789) - Restore support for records in models (OCamlPro/alt-ergo#793) - Use abstract values instead of dummy values in models where the actual value does not matter (OCamlPro/alt-ergo#804, OCamlPro/alt-ergo#835) - Use fresh names for all abstract values to prevent accidental captures (OCamlPro/alt-ergo#811) - Add support for model generation with the default CDCL solver (OCamlPro/alt-ergo#829) - Support model generation for the BV theory (OCamlPro/alt-ergo#841, OCamlPro/alt-ergo#968) - Add support for optimization (MaxSMT / OptiSMT) with lexicographic Int and Real objectives (OCamlPro/alt-ergo#861, OCamlPro/alt-ergo#921) - Add a SMT-LIB printer for expressions (OCamlPro/alt-ergo#952, OCamlPro/alt-ergo#981, OCamlPro/alt-ergo#1082, OCamlPro/alt-ergo#931, OCamlPro/alt-ergo#932) - Ensure models have a value for all constants in the problem (OCamlPro/alt-ergo#1019) - Fix a rare soundness issue with integer constraints when model generation is enabled (OCamlPro/alt-ergo#1025) - Support model generation for the ADT theory (OCamlPro/alt-ergo#1093, OCamlPro/alt-ergo#1153) ### Theory reasoning - Add word-level propagators for the BV theory (OCamlPro/alt-ergo#944, OCamlPro/alt-ergo#1004, OCamlPro/alt-ergo#1007, OCamlPro/alt-ergo#1010, OCamlPro/alt-ergo#1011, OCamlPro/alt-ergo#1012, OCamlPro/alt-ergo#1040, OCamlPro/alt-ergo#1044, OCamlPro/alt-ergo#1054, OCamlPro/alt-ergo#1055, OCamlPro/alt-ergo#1056, OCamlPro/alt-ergo#1057, OCamlPro/alt-ergo#1065, OCamlPro/alt-ergo#1073, OCamlPro/alt-ergo#1144, OCamlPro/alt-ergo#1152) - Add interval domains and arithmetic propagators for the BV theory (OCamlPro/alt-ergo#1058, OCamlPro/alt-ergo#1083, OCamlPro/alt-ergo#1084, OCamlPro/alt-ergo#1085) - Native support for bv2nat of bit-vector normal forms (OCamlPro/alt-ergo#1154) - Fix incompleteness issues in the BV solver (OCamlPro/alt-ergo#978, OCamlPro/alt-ergo#979) - Abstract more arguments of AC symbols to avoid infinite loops when they contain other AC symbols (OCamlPro/alt-ergo#990) - Do not make irrelevant decisions in CDCL solver, improving performance slightly (OCamlPro/alt-ergo#1041) - Rewrite the ADT theory to use domains and integrate the enum theory into the ADT theory (OCamlPro/alt-ergo#1078, OCamlPro/alt-ergo#1086, OCamlPro/alt-ergo#1087, OCamlPro/alt-ergo#1091, OCamlPro/alt-ergo#1094, OCamlPro/alt-ergo#1138) - Rewrite the Intervals module entirely (OCamlPro/alt-ergo#1108) - Add maximize/minimize terms for matching (OCamlPro/alt-ergo#1166) - Internalize `sign_extend` and `repeat` (OCamlPro/alt-ergo#1192) - Run cross-propagators to completion (OCamlPro/alt-ergo#1221) - Support binary distinct on arbitrary bit-widths (OCamlPro/alt-ergo#1222) - Only perform optimization when building a model (OCamlPro/alt-ergo#1224) - Make sure domains do not overflow the default domain (OCamlPro/alt-ergo#1225) - Do not build unnormalized values in `zero_extend` (OCamlPro/alt-ergo#1226) ### Internal/library changes - Rewrite the Vec module (OCamlPro/alt-ergo#607) - Move printer definitions closer to type definitions (OCamlPro/alt-ergo#808) - Mark proxy names as reserved (OCamlPro/alt-ergo#836) - Use a Zarith-based representation for numbers and bit-vectors (OCamlPro/alt-ergo#850, OCamlPro/alt-ergo#943) - Add native support for (bvnot) in the BV solver (OCamlPro/alt-ergo#856) - Add constant propagators for partially interpreted functions (OCamlPro/alt-ergo#869) - Remove `Util.failwith` in favor of `Fmt.failwith` (OCamlPro/alt-ergo#872) - Add more `Expr` smart constructors (OCamlPro/alt-ergo#877, OCamlPro/alt-ergo#878) - Do not use existential variables for integer division (OCamlPro/alt-ergo#881) - Preserve `Subst` literals to prevent accidental incompleteness (OCamlPro/alt-ergo#886) - Properly start timers (OCamlPro/alt-ergo#924) - Compute a concrete representation of a model instead of performing (OCamlPro/alt-ergo#925) - Allow direct access to the SAT API in the Alt-Ergo library computations during printing (OCamlPro/alt-ergo#927) - Better handling for step limit (OCamlPro/alt-ergo#936) - Add a generic option manager to deal with the dolmen state (OCamlPro/alt-ergo#951) - Expose an imperative SAT API in the Alt-Ergo library (OCamlPro/alt-ergo#962) - Keep track of the SMT-LIB mode (OCamlPro/alt-ergo#971) - Add ability to decide on semantic literals (OCamlPro/alt-ergo#1027, OCamlPro/alt-ergo#1118) - Preserve trigger order when parsing quantifiers with multiple trigger (OCamlPro/alt-ergo#1046). - Store domains inside the union-find module (OCamlPro/alt-ergo#1119) - Remove some polymorphic hashtables (OCamlPro/alt-ergo#1219) ### Build and integration - Drop support for OCaml <4.08.1 (OCamlPro/alt-ergo#803) - Use dune-site for the inequalities plugins. External pluginsm ust now be registered through the dune-site plugin mechanism in the `(alt-ergo plugins)` site to be picked up by Alt-Ergo (OCamlPro/alt-ergo#1049). - Add a release workflow (OCamlPro/alt-ergo#827) - Add a Windows workflow (OCamlPro/alt-ergo#1203) - Mark the dune.inc file as linguist-generated to avoid huge diffs (OCamlPro/alt-ergo#830) - Use GitHub Actions badges in the README (OCamlPro/alt-ergo#882) - Use `dune build @check` to build the project (OCamlPro/alt-ergo#887) - Enable warnings as errors on the CI (OCamlPro/alt-ergo#888) - Uniformization of internal identifiers generation (OCamlPro/alt-ergo#905, OCamlPro/alt-ergo#918) - Use an efficient `String.starts_with` implementation (OCamlPro/alt-ergo#912) - Fix the Makefile (OCamlPro/alt-ergo#914) - Add `Logs` dependency (OCamlPro/alt-ergo#1206) - Use `dynamic_include` to include the generated file `dune.inc` (OCamlPro/alt-ergo#1199) - Support Windows (OCamlPro/alt-ergo#1184,OCamlPro/alt-ergo#1189,OCamlPro/alt-ergo#1195,OCamlPro/alt-ergo#1199,OCamlPro/alt-ergo#1200) - Wrap the library `Alt_ergo_prelude` (OCamlPro/alt-ergo#1223) ### Testing - Use --enable-assertions in tests (OCamlPro/alt-ergo#809) - Add a test for push/pop (OCamlPro/alt-ergo#843) - Use the CDCL solver when testing model generation (OCamlPro/alt-ergo#938) - Do not test .smt2 files with the legacy frontend (OCamlPro/alt-ergo#939) - Restore automatic creation of .expected files (OCamlPro/alt-ergo#941) ### Documentation - Add a new example for model generation (OCamlPro/alt-ergo#826) - Add a Pygments lexer for the Alt-Ergo native language (OCamlPro/alt-ergo#862) - Update the current authors (OCamlPro/alt-ergo#865) - Documentation of the `Enum` theory (OCamlPro/alt-ergo#871) - Document `Th_util.lit_origin` (OCamlPro/alt-ergo#915) - Document the CDCL-Tableaux solver (OCamlPro/alt-ergo#995) - Document Windows support (OCamlPro/alt-ergo#1216) - Remove instructions to install Alt-Ergo on Debian (OCamlPro/alt-ergo#1217) - Document optimization feature (OCamlPro/alt-ergo#1231)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This is a documentation-only patch for the CDCL-Tableaux solver. There is not much additional documentation for the pure CDCL solver, except regarding the use of the
tatoms_queueas an intermediate place to hold decided and (clause) propagated atoms before performing theory propagations in bulk. The CDCL solver is heavily based on miniSAT, and hence http://www.decision-procedures.org/handouts/MiniSat.pdf is probably a better documentation at a high level than anything we could write.