A OctoPrint-Plugin that sends the current progress of a print via M117 command to the printer-display and also to the top navigation bar.

This plugin, as well as my other plugins were developed in my spare time. If you like it, I would be thankful about a cup of coffee :)

It shows:

• Progress, M73Progress, EstimatedEndTime, PrintTimeLeft,
• CurrentLayer, TotalLayerCount, last/average LayerDuration,
• CurrentHeight, TotalHeight, Feedrate, Fanspeed,
• ChangeFilamentTimeLeft, EstimatedChangeFilamentTime and ChangefilamentCount (based on M600 command location in file)
• Printer State
• Currently printed filename
• Bed and Tool Temperatures

Some output examples:

• Printer Display: 50% L=60/120 H=23mm/47mm
• NavBar: Layer: 60 / 120 Height: 23mm of 47mm
• Browser TabTitle: 12% 19:32 o'clock

Output pattern is adjustable!

Detailed description how the plugin works, could be find in the wiki: https://github.com/OllisGit/OctoPrint-DisplayLayerProgress/wiki/How-does-the-plugin-works

ATTENTION:

• The layer information works only when the slicer adds "layer-indicator" as comments to the G-Code (CURA-Example as comments like ;LAYER:10). Then these indicators are parsed via a regular-expression.
• The G-Code is modified during upload (could be disabled since V1.19.0)! The "layer-indicators" from the slicer were replaced with a "neutral" M117 G-Code (M117 INDICATOR-Layer). This is necessary, because during printing OctoPrint removes all comments from g-code.
• Out of the box supported slicers:
  • CURA, Simplify3D, ideaMaker, KISSlicer, Slic3r
  • You can add your own layer-expressions in Plugin-Settings
• If you are not able find a layer-expression, try to add a "post processiong script in your slicer" E.g. for "slic3r", see Enhancement #8
• Sometimes there is a "post processing script" that deletes all comments (e.g. see Issue #33)
• The total height "calculation" can be done in three ways: 1)the max Z-Value in the G-Code, 2) max Z-Value with extrusion in this height, 3) define a expression like this ;MAXZ:([0-9]+[.]*[0-9]*).* to evaluate the max height Issue #82
• The height/layer information is sometimes not matching with G-Code Viewer, because the viewer did a lot of "magic" (e.g. add extrusion diameter to height)

Comment Format Examples:

CURA: ;LAYER:10

Simplify3D: ; layer 10, Z = 1.640

The implementation is based on four steps:

1. PreProcessing the selected G-Code during upload (replace layer-comment with M117 indicator G-Code)
2. Read total layer and height count from G-Code before start (used last layer-comment)
3. G-Code-hook to collect the current layer information (M117-command from step 1)
4. Progress-Hook to send all information to the printer/navbar/browserTitle

A more detailed technical description could be found in this wiki-page: How-does-the-plugin-works

If you receive a popup message: "Layer indicator not found in file!", then check Layer-Indicator comments in the layer-settings section against your g-code. If you adjust the layer expression, then you need to reupload your g-code file again.

Install via the bundled Plugin Manager or manually using this URL:

https://github.com/OllisGit/OctoPrint-DisplayLayerProgress/releases/latest/download/master.zip

After installation, you can listen on three release channels (since 1.28.0). What does this mean: Each channel has its own release-version and each release has a different kind of functionality and stability.

• "Only Release": Only stable and tested versions will be shown in the software-update section of OctoPrint
• "Release & Candidate": Beside the stable release, you can also see the "release-candidates", like '''1.29.0rc3'''. The rc's includde new functionalty/bugfixes and are already tested by the community.. so by YOU ;-)
• "Release & Candidate & in Development": Beside stable and rc, you will be informed about development versions. A development version like '''1.30.0.dev5``` could include a new (experimental) feature/bugfix, but it is not fully tested by the community

Changing between each release is done via the "Software Update section" in the settings.

!!! If you use the development-channel, you can use the latest feature and can improve the quality of the plugin !!!

Hint: "Easy-switching" is possible with OctoPrint-Version 1.8.0 (see OctoPrint/OctoPrint#4238). At the meantime you need to uninstall and install the version you like from the selected channel...or stay in one channel ;-)

It is possible to change the Output. See Plugin-Settings:

see Release-Overview

You can receive the layer/height and other values via a GET-Call.

curl -H "X-Api-Key:57FECA453FE94D46851EFC94BC9B5265" http://localhost:5000/plugin/DisplayLayerProgress/values

{
  "currentFilename": "AE10_xyzCalibration_cube.gcode",
  "fanSpeed": "69%",
  "feedrate": "3000",
  "feedrateG0": "3000",
  "feedrateG1": "953.8",
  "height": {
    "current": "8.00",
    "currentFormatted": "8"
    "total": "15.00",
    "totalFormatted": "15",
    "totalWithExtrusion": "10.0",  //DEPRECATED don't use it will be removed in version 1.19.0
    "totalWithExtrusionFormatted": "10"  //DEPRECATED don't use it will be removed in version 1.19.0
  },
  "layer": {
    "averageLayerDuration": "0h:01m:03s",
    "averageLayerDurationInSeconds": 63,
    "current": "39",
    "lastLayerDuration": "0h:00m:58s",
    "lastLayerDurationInSeconds": 58,
    "total": "49"
  },
  "print": {
    "printerState": "printing",
    "progress": "73",
    "m73progress": "86",
    "timeLeft": "40s",
    "timeLeftInSeconds": 40,
    "estimatedEndTime": "20:24",
    "changeFilamentCount": 3,
    "changeFilamentTimeLeft": "32s",
    "changeFilamentTimeLeftInSeconds": 32,
    "estimatedChangedFilamentTime": "22:36",
  }
}

Plugin sends the following custom events to the eventbus like this:

eventManager().fire(eventKey, eventPayload)

Payload

 {
   'updateReason', // values: frontEndCall, heightChanged, progressChanged,
                              // m73ProgressChanged, layerChanged, ... see EventKeys
   'totalLayer':'66',
   'currentLayer':'22',
   'currentHeight':'6.80',
   'currentHeightFormatted':'6',
   'totalHeight':15
   'totalHeightFormatted':'15',
   'totalHeightWithExtrusion':'20.0',  //DEPRECATED don't use it will be removed in version 1.19.0
   'totalHeightWithExtrusionFormatted':'20',  //DEPRECATED don't use it will be removed in next version 1.19.0
   'feedrate':'2700',
   'feedrateG0':'7200',
   'feedrateG1':'2700',
   'fanspeed':'100%',
   'progress':'28',
   'm73progress':'33',
   'printerState':'printing',
   'lastLayerDuration':'0h:00m:03s',
   'lastLayerDurationInSeconds':3,
   'averageLayerDuration':'0h:00m:02s',
   'averageLayerDurationInSeconds':2,
   'printTimeLeft':'2m3s',
   'printTimeLeftInSeconds':123,
   'estimatedEndTime':'20:24',
   'estimatedChangedFilamentTime': '20:22',
   'changeFilamentTimeLeft': '1m12s,
   'changeFilamentTimeLeftInSeconds': 72,
   'changeFilamentCount': 2,
   'currentFilename': 'AE10_xyzCalibration_cube.gcode'
 }

Other Plugins could listen to this events in there python-code like this:

eventmanager.subscribe("DisplayLayerProgress_layerChanged", self._myEventListener)

or use octoprint.plugin.EventHandlerPlugin with something like this:

def on_event(self, event, payload):
    if event == "DisplayLayerProgress_layerChanged":
        ## do something usefull

If enabled in the plugin-settings the above event-payload is also send via websocket to the client.

Other Plugins could listen to this events in there javascript-code like this:

self.onDataUpdaterPluginMessage = function (plugin, data) {

    if (plugin == "DisplayLayerProgress-websocket-payload") {
        // .. do somethig useful with the data
        return;
    }

Goes to:

• JetBrains for supporting OpenSource-Projects, see https://jb.gg/OpenSource