PLCnext Technology - Bus Conductor

Date	Version	Authors
22.07.2021	1.4	Martin Boers

Description

This application can be used to configure a local PLCnext Control I/O bus, containing either Axioline or Inline I/O modules, without the need to hard-code the specific I/O configuration either directly in .tic files, or indirectly using PLCnext Engineer.

This may be useful in applications where the precise I/O configuration is not known at design-time, or must be changed dynamically at run-time. Examples include:

A machine builder who uses a single PLCnext Engineer project for multiple machine configurations, where the PLC program dynamically adapts itself based on the arrangement of local I/O modules detected.
A PLCnext Control device used as a general-purpose RTU, data logger, or multiplexer, where the I/O arrangement must be flexible.
A custom PLCnext Control run-time written in any language (e.g. C/C++, rust, node.js, python) which requires flexible local I/O, but which does not want to manipulate .tic files. This can be used by applications like Sample Runtime so that PLCnext Engineer or IoConf are no longer required for I/O configuration.

Software developers who want to build this type of functionality into their own projects are free to use this application as a reference.

Note: The terms "Inline" and "Interbus" are used interchangeably in this document, since the Inline I/O system uses the Interbus communication protocol.

Alternatives

The C++ code in this project has been ported to IEC-61131 code by Gianluca Riboldi. That solution is described here: https://www.plcnext-community.net/en/hn-makers-blog/473-dynamic-axiobus-configuration-totally-iec-61131.html

Background

On a PLCnext Control device, local I/O can only be accessed via system components that are started as part of the plcnext process. The system components that handle local I/O - either Axioline or Inline - must be configured using TIC ("Technology Independent Configuration") files, which are XML files in a format defined by Phoenix Contact.

Currently the only practical method of generating a valid set of TIC files is by using either PLCnext Engineer or IoConf software, where the arrangement of local I/O modules must be configured manually. Both of these software packages generate TIC files for the specified hardware configuration. In the case of PLCnext Engineer, these TIC files are sent to the PLC with the PLCnext Engineer project.

Once on the PLC, TIC files are read during startup of the plcnext process. TIC files cannot be reloaded while the plcnext process is running.

This application demonstrates how to use a single set of TIC files to configure and re-configure the arrangement of local I/O modules that are connected to a PLC - without the need to manually create different I/O module arrangements in PLCnext Engineer.

Building from source

The project can be built using the PLCnext CLI tool, either from the command-line or from Eclipse (with the PLCnext add-in). A suitable SDK for AXC F 1152 or AXC F 2152 is required. The SDK version should match the firmware version on the controller.

Before building, use plcncli to set the project target to match your SDK and controller version. Useful plcncli commands include:

plcncli get project-sdks                        # Gets the current target(s)
plcncli set target --remove --name axcf2152     # Removes an existing target from the project
plcncli set target --add -n axcf2152 -v 2021.6  # Adds a new target to the project

When building from the command line, the following commands should be called in sequence from the project root directory:

plcncli generate code
plcncli generate config
plcncli build
plcncli deploy

Operation

The BusConductor library contains one component, called BcComponent. One instance of this component must be created by the user. The component includes one GDS port named "BusConductor", which is a structure containing the following fields:

Field name	C++ Type	Direction	Description
CONFIG_REQ	boolean	input	Request to (re-)configure the local bus
CONFIG_MUST_MATCH	boolean	input	Local bus configuration must match the user-specified configuration
START_IO_REQ	boolean	input	Request to start local I/O exchange
CONFIGURED	boolean	output	Local bus has been (re-)configured
NUM_MODULES	uint16	output	Total number of local I/O modules detected

The two REQ commands are processed on a rising edge. They should both be set in sequence, and START_IO_REQ will not be processed if CONFIGURED is not TRUE.

If CONFIG_MUST_MATCH is TRUE, then the user must place a file named config.txt in the PLC directory /opt/plcnext/projects/BusConductor. This file contains the expected local I/O module arrangement, and is checked (if necessary) during the processing of the CONFIG_REQ command. If there is any mis-match detected between the contents of this file and the actual local I/O configuration, then CONFIGURED will remain FALSE, and the bus cannot be started. In this case, check the Output.log file on the PLC for error messages.

If CONFIG_MUST_MATCH is FALSE, then no configuration checking is done, and a config.txt file does not need to be provided.

The CONFIGURED output variable from the BusConductor component is latched, and is only reset on a rising edge of the CONFIG_REQ input. Once running, the real-time status of the local I/O bus should be monitored using the diagnostics variables provided by the PLCnext Control device (refer to the "Local bus diagnostics" section below).

Once the local bus is running, process data can be exchanged with all local I/O modules using the GDS ports "Arp.Io.AxlC/0.DI4096" (inputs) and "Arp.Io.AxlC/0.DO4096" (outputs). Process data from each I/O module will appear in these two arrays in the same order that the modules appear on the local bus. The amount of process data for each I/O module can be obtained from the data sheet for that module.

Note that this app starts all I/O modules using the configuration that is stored in the module. Any changes to module-specific configuration (e.g. analog output channel configuration) must be done separately, using (for example) the PDI_WRITE function block in the PLCnext Controller library, or the Acyclic Communication RSC service.

Quick start

This app can be built as a PLCnext Engineer Library, but can be used without PLCnext Engineer. This quick-start covers both cases. Use of this app without PLCnext Engineer requires advanced knowledge of file-based configuration and operation of PLCnext Control programs.

Quick Start using PLCnext Engineer

Create a new PLCnext Engineer project.
Keep the default local bus type (Axioline), or switch the local bus type to InLine.
Create a generic I/O configuration. In the PLCnext Engineer Components Search box, enter "AXL F physcial" (sic) for Axioline, or "IB IL 256" for Inline. Drag the generic I/O module from the Component library to the Axioline or Inline controller in the Project tree.

Create the following user-defined data types

For Axioline I/O:

TYPE
  ARR_LOCAL_IO : ARRAY [1..512] OF BYTE;
END_TYPE

For Inline I/O:

TYPE
  ARR_LOCAL_IO : ARRAY [1..256] OF BYTE;
END_TYPE

For both Axioline and Inline I/O:

TYPE
  BUS_CONDUCTOR       : STRUCT
    CONFIG_REQ        : BOOL;
    CONFIG_MUST_MATCH : BOOL;
    START_IO_REQ      : BOOL;
    CONFIGURED        : BOOL;
    NUM_MODULES       : UINT;
  END_STRUCT
END_TYPE

Create a local IEC program in any language. In the variable table for that program, declare the following variables:

Name Type Usage

Field_Inputs ARR_LOCAL_IO IN Port

Field_Outputs ARR_LOCAL_IO OUT Port

BusConfig_Inputs BUS_CONDUCTOR IN Port

BusConfig_Outputs BUS_CONDUCTOR OUT Port
In a Code sheet for the local IEC program, add the following logic:
```
BusConfig_Outputs.CONFIGURED := BusConfig_Inputs.CONFIGURED;
BusConfig_Outputs.NUM_MODULES := BusConfig_Inputs.NUM_MODULES;
```
(This is a work-around for a current limitation on Component Ports in PLCnext Engineer)
Create one instance of the local IEC program in a PLCnext Task.
In the PLCnext Port List, connect the Field_Inputs and Field_Outputs to the DO4096 and DI4096 ports on the generic Axioline I/O module, or the DO2048 and DI2048 ports on the generic Inline I/O module.
Add the BusConductor user library to the PLCnext Engineer project.
Create one instance of the BcProgram program (from the BusConductor library) in a PLCnext Task.
In the PLCnext Port List, connect the ports BusConfig_Inputs and BusConfig_Outputs to the BusConductor port on BcComponent1.
Download the PLCnext Engineer project to the PLC and enter Debug mode.
Set the variable BusConfig_Outputs.CONFIG_MUST_MATCH to FALSE.
Set the variable BusConfig_Outputs.CONFIG_REQ to TRUE.
Check that the variable BusConfig_Inputs.CONFIGURED goes TRUE, and BusConfig_Inputs.NUM_MODULES is set to the total number of I/O modules on the local bus. The local bus is now configured and ready to exchange I/O data.
Set the variable BusConfig_Outputs.START_IO_REQ to TRUE.
Check that the local bus is running, using the standard diagnostics variables (described below). The local bus is now exchanging I/O data with the Field_Inputs and Field_Outputs variables.

Process Data from each I/O module is mapped to the Field_Inputs and Field_Outputs byte arrays. Check the documentation for each I/O module to see how many bytes of process data are provided by that module.

Quick Start without PLCnext Engineer

This example describes the use of Axioline I/O. A similar procedure is used to configure Inline I/O.

Installing this application without PLCnext Engineer requires advanced knowledge of file-based configuration and operation of PLCnext Control programs.

Procedure:

Clone the Github repository and build the application from source, using the instructions above.
Using ssh on the host machine, log in to the PLC as admin.
On the PLC, create a new directory for this project, e.g.
```
mkdir /opt/plcnext/projects/BusConductor
```
Copy the contents of the generic_axioline directory from the host to the PLC directory /opt/plcnext/projects/BusConductor, e.g.
```
cd generic_axioline
scp -r * admin@192.168.1.10:~/projects/BusConductor
```
This directory contains the generic Axioline bus configuration, including a valid set of TIC files.
Using a procedure similar to the one described in the CppExamples repository, add the following application files to the correct sub-directories on the PLC:
- libBusConductor.so and all the associated meta configuration files.
- A PLM configuration file, to load the BusConductor program library.
- An ESM configuration file, to create an ESM task and an instance of the BusConductor program.
Examples of these files, including the correct directory structure, are contained in the no_engineer directory in this repository. The contents of this directory can be copied to the PLC directory /opt/plcnext/projects/BusConductor, replacing any files with the same name that were copied from the generic_axioline directory. e.g.
```
cd no_engineer
scp -r * admin@192.168.1.10:~/projects/BusConductor
```
On the PLC, change the 'current' symlink to point to the new project directory.
```
cd /opt/plcnext/projects
rm current
ln -s BusConductor current
```
This tells the PLCnext Control device to use this as the default project, which will load all the configuration files from this directory.
Restart the PLCnext runtime to create the BusConductor component.
If using the configuration files in this example, the name of the BusConductor port in the Global Data Space will be "BcComponent1/BusConductor"

You must now send commands to the BcComponent instance from your own application via the Global Data Space. How this is done will be specific to each user application. For example, you can use a gds.config file to connect the BusConductor port to a GDS port in your own C++ project, or you can read and write GDS data by subscribing to the Data Access RSC Service in the PLC. In any case, be sure to include the following logic in your application:

BusConfig_Outputs.CONFIGURED = BusConfig_Inputs.CONFIGURED;
BusConfig_Outputs.NUM_MODULES = BusConfig_Inputs.NUM_MODULES;

(This is a work-around for a current limitiation on Component Ports in PLCnext Engineer)

Once the local bus is running, I/O data can be exchanged with a user application in a number of ways. Entries in a gds.config file can be used to connect I/O data to GDS ports in the user application, or the ANSI-C interface can be used to read and write I/O data.

An example of how to use the Data Access RSC Service (for GDS access) and the ANSI-C libraries (for I/O access) are given in the Sample Runtime example. This sample could be modified to use the BusConductor component to start the Axioline bus, which would eliminate the need to use PLCnext Engineer to generate a different I/O configuration for each specific arrangement of I/O modules.

Format of user confguration file - /opt/plcnext/projects/BusConductor/config.txt

If provided, this file must contain at least one line. Each line must contain a single integer in base 10 format. There must be no blank lines.

If the format of the config.txt file is not correct, or if there are differences between the expected and actual local I/O configurations, then these will be reported in the Output.log file in the PLC directory /opt/plcnext/logs

The numbers in the configuration file will be interpreted as follows:

Axioline

Line number(s)	Meaning
1	Total number of I/O modules expected
2-5	Device Type for first I/O module
6-9	Device Type for second I/O module
10-13	Device Type for third I/O module
:	:
:	Device Type for last I/O module

Device Type is specified as a series of 8 bytes, unique for each type of local I/O module. These 8 bytes are represented in the config.txt file as 4 x 16 bit integers (in base 10 format) as follows:

Line number	Device Type bytes
x	MSB = byte 7, LSB = byte 6
x+1	MSB = byte 5, LSB = byte 4
x+2	MSB = byte 3, LSB = byte 2
x+3	MSB = byte 1, LSB = byte 0

The Device Type for each type of I/O module can be found in the data sheet for that module - search for the text "Device Type" or "DeviceType". For example, the data sheet for the Axioline module AXL F DI8/3 DO8/3 2H (part number 2702071) shows the device type as follows:

... so for an Axioline bus with a single I/O module of this type, the contents of the config.txt file will be:

If operation without I/O modules is required, then the first line of the config.txt file should contain the number 0. In this case, differences between the expected and actual local I/O configurations will not be checked, and any connected I/O modules will not be accessible.

Inline

Line number(s)	Meaning
1	Total number of I/O modules expected
2	Length code & ID code for first I/O module
3	Length code & ID code for second I/O module
4	Length code & ID code for third I/O module
:	:
:	Length code & ID code for last I/O module

Length code & ID code is specified as a 16 bit integer in base 10 format. The most significant byte represents the Length code, and the least significant byte represents the ID code.

The Length code and ID code for each type of I/O module can be found in the data sheet for that module. For example, the data sheet for the Inline module IB IL 24 DI8/HD-PAC (part number 2700173) shows the Length code and ID code as follows:

... so for an Inline bus with a single I/O module of this type, the contents of the config.txt file will be:

1
33214

... where 33214 is the decimal representation of 81BE (hex).

Local bus diagnostics

Once the local I/O bus is running, diagnostics are available from the following standard GDS OUT port variables.

Axioline

A description of each of the variables in the table below is given in the document "UM EN AXL F SYS DIAG", available for download from the Phoenix Contact website.

Port Name	IEC Type
Arp.Io.AxlC/AXIO_DIAG_STATUS_REG_HI	Bitstring8
Arp.Io.AxlC/AXIO_DIAG_STATUS_REG_LOW	Bitstring8
Arp.Io.AxlC/AXIO_DIAG_STATUS_REG_PF	BOOL
Arp.Io.AxlC/AXIO_DIAG_STATUS_REG_BUS	BOOL
Arp.Io.AxlC/AXIO_DIAG_STATUS_REG_RUN	BOOL
Arp.Io.AxlC/AXIO_DIAG_STATUS_REG_ACT	BOOL
Arp.Io.AxlC/AXIO_DIAG_STATUS_REG_RDY	BOOL
Arp.Io.AxlC/AXIO_DIAG_STATUS_REG_SYSFAIL	BOOL
Arp.Io.AxlC/AXIO_DIAG_STATUS_REG_PW	BOOL
Arp.Io.AxlC/AXIO_DIAG_PARAM_REG_HI	Bitstring8
Arp.Io.AxlC/AXIO_DIAG_PARAM_REG_LOW	Bitstring8
Arp.Io.AxlC/AXIO_DIAG_PARAM_2_REG_HI	Bitstring8
Arp.Io.AxlC/AXIO_DIAG_PARAM_2_REG_LOW	Bitstring8

Inline

A description of each of the variables in the table below is given in the document "IBS SYS DIAG DSC UM E", available for download from the Phoenix Contact website.

Port Name	IEC Type
Arp.Io.IbM/IB_DIAG_STATUS_REG_HI	Bitstring8
Arp.Io.IbM/IB_DIAG_STATUS_REG_LOW	Bitstring8
Arp.Io.IbM/IB_DIAG_STATUS_REG_PF	BOOL
Arp.Io.IbM/IB_DIAG_STATUS_REG_BUS	BOOL
Arp.Io.IbM/IB_DIAG_STATUS_REG_RUN	BOOL
Arp.Io.IbM/IB_DIAG_STATUS_REG_ACT	BOOL
Arp.Io.IbM/IB_DIAG_STATUS_REG_RDY	BOOL
Arp.Io.IbM/IB_DIAG_STATUS_REG_SYSFAIL	BOOL
Arp.Io.IbM/IB_DIAG_STATUS_REG_WARN	BOOL
Arp.Io.IbM/IB_DIAG_STATUS_REG_QUAL	BOOL
Arp.Io.IbM/IB_DIAG_STATUS_REG_USER	BOOL
Arp.Io.IbM/IB_DIAG_STATUS_REG_CTRL	BOOL
Arp.Io.IbM/IB_DIAG_STATUS_REG_DTC	BOOL
Arp.Io.IbM/IB_DIAG_PARAM_REG_HI	Bitstring8
Arp.Io.IbM/IB_DIAG_PARAM_REG_LOW	Bitstring8
Arp.Io.IbM/IB_DIAG_PARAM_2_REG_HI	Bitstring8
Arp.Io.IbM/IB_DIAG_PARAM_2_REG_LOW	Bitstring8

Restarting the local bus after error

Axioline

If there is an error on the local bus (e.g. missing I/O module), then the Axioline bus will restart automatically when the originally configured I/O module arrangement is detected. This feature could be used, for example, to replace a faulty I/O module without powering down the PLC. In this case, however, the faulty I/O module will still need to be powered off if it does not support hot-swapping.

Inline

If there is an error on the local bus (e.g. missing I/O module), then the Inline bus can be restarted by resetting the START_IO_REQ flag, and then setting it again. In the case of persistent errors, this restart procedure could be repeated periodically until the error is cleared, or until a maximum number of restart attempts are made. These types of restart procedures will be specific to each application, so it is left to the user to implement this if needed.

Dynamically changing the local bus configuration

If the arrangement of I/O modules on the local bus is changed, the user can restart the local bus by resetting the CONFIG_REQ and START_IO_REQ flags, and then setting them again in sequence.

Changing the local I/O update rate

By default, I/O data is exchanged with local I/O modules every 500 µs. This can be changed, if required, using either PLCnext Engineer or (for applications that do not use PLCnext Engineer) by editing configuration files directly on the PLC:

Using PLCnext Engineer

In PLCnext Engineer, double-click on the local I/O bus controller (e.g. "Axioline F") in the Project pane, click on the Settings tab, and select the "Trigger task" menu item.
Select a cyclic task from the drop-down list. Data will be exchanged with local I/O modules every time this task is executed.
If no cyclic task is selected, the I/O update rate is calculated by the PLCnext Runtime.
If no cyclic tasks are defined on any ESM, I/O data is exchanged with local I/O modules every 500 µs.

Without PLCnext Engineer

In the esm.config file for your project, define a cyclic task that will be used to trigger local I/O updates.
Associate this task with an ESM.

Add the following section to the .esm.config file:

  <TaskEvents>
    <TaskEvent name="Arp.Io.AxlC.OnExecuting" taskName="YourTask" event="Executing" />
    <TaskEvent name="Arp.Io.AxlC.OnExecuted" taskName="YourTask" event="Executed" />
  </TaskEvents>

Troubleshooting

If the BusConductor component appears not to be working, check the contents of the file /opt/plcnext/logs/Output.log, and look for entries from the component BusConductor.BcComponent. This can be done with the following command:

cat /opt/plcnext/logs/Output.log | grep BusConductor.BcComponent

How to get support

This app is supported in the forum of the PLCnext Community. Please raise an issue with a detailed error description and always provide a copy of the Output.log file.

Design notes

This app is designed to be used in PLCnext Engineer, but also be useable by other C++ components. Note that the current version of PLCnext Engineer (2020.6) provides limited support for the "Component Ports" feature of the PLCnext Control firmware, and no support for component-only libraries. This project includes some features that work around these limitiations - for example, the only purpose of the program BcProgram in the BusConductor library is to force PLCnext Engineer to instantiate BcComponent, which would otherwise not be instantiated by PLCnext Engineer.

Name		Name	Last commit message	Last commit date
Latest commit History 34 Commits
design		design
generic_axioline		generic_axioline
generic_inline		generic_inline
images		images
no_engineer		no_engineer
src		src
.gitignore		.gitignore
BusConductor.acf.config		BusConductor.acf.config
CMakeLists.txt		CMakeLists.txt
CONTRIBUTING.md		CONTRIBUTING.md
CONTRIBUTORS.md		CONTRIBUTORS.md
CodeOfConduct.md		CodeOfConduct.md
LICENSE		LICENSE
MAINTAINERS.md		MAINTAINERS.md
PLCnext_Store_Icons_1024x1024_Library_NoFrame-20190611083342.png		PLCnext_Store_Icons_1024x1024_Library_NoFrame-20190611083342.png
README.md		README.md
SECURITY.md		SECURITY.md
plcnext.proj		plcnext.proj

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

PLCnext Technology - Bus Conductor

Description

Alternatives

Background

Building from source

Operation

Quick start

Quick Start using PLCnext Engineer

Quick Start without PLCnext Engineer

Format of user confguration file - /opt/plcnext/projects/BusConductor/config.txt

Axioline

Inline

Local bus diagnostics

Axioline

Inline

Restarting the local bus after error

Axioline

Inline

Dynamically changing the local bus configuration

Changing the local I/O update rate

Using PLCnext Engineer

Without PLCnext Engineer

Troubleshooting

How to get support

Design notes

About

Releases

Packages

Contributors 3

Languages

Name	Type	Usage
Field_Inputs	ARR_LOCAL_IO	IN Port
Field_Outputs	ARR_LOCAL_IO	OUT Port
BusConfig_Inputs	BUS_CONDUCTOR	IN Port
BusConfig_Outputs	BUS_CONDUCTOR	OUT Port

License

PLCnext/BusConductor

Folders and files

Latest commit

History

Repository files navigation

PLCnext Technology - Bus Conductor

Description

Alternatives

Background

Building from source

Operation

Quick start

Quick Start using PLCnext Engineer

Quick Start without PLCnext Engineer

Format of user confguration file - /opt/plcnext/projects/BusConductor/config.txt

Axioline

Inline

Local bus diagnostics

Axioline

Inline

Restarting the local bus after error

Axioline

Inline

Dynamically changing the local bus configuration

Changing the local I/O update rate

Using PLCnext Engineer

Without PLCnext Engineer

Troubleshooting

How to get support

Design notes

About

Resources

License

Security policy

Stars

Watchers

Forks

Releases

Packages 0

Contributors 3

Languages

Packages