FWD: Not OK: perl 5.00557 on OPENSTEP-Mach 4_2 (UNINSTALLED)

[p5pRT]

Migrated from rt.perl.org#830 (status was 'resolved')

Searchable as RT830$

[p5pRT]

From Richard.Foley@m.dasa.de

This report has been registered with perlbug.

-----Ursprüngliche Nachricht-----
Von​: perlbug@​perl.org [mailto​:perlbug@​perl.org]
Gesendet am​: Tuesday, June 01, 1999 3​:09 AM
An​: hansm@​icgned.icgroup.nl
Betreff​: perlbug rejection​: Not OK​: perl 5.00557 on OPENSTEP-Mach 4_2
(UNINSTALLED)
 
From hansm@​icgned.icgroup.nl Mon May 31 21​:08​:52 1999
Received​: from jhereg.perl.com (IDENT​:root@​perl.com [199.45.135.9]) by
  defender.perl.org (8.9.3/8.9.3/Debian/GNU) with ESMTP id VAA30252 for
  <perlbugtron@​perl.org>; Mon, 31 May 1999 21​:08​:49 -0400
From​: hansm@​icgned.icgroup.nl
Received​: from icgbdc002.icgroup.nl (icgbdc002.icgroup.nl [194.134.71.2])
  by jhereg.perl.com (8.9.0/8.9.0) with ESMTP id SAA30787 for
  <perlbug@​perl.com>; Mon, 31 May 1999 18​:04​:33 -0600
Received​: from icgned.icgroup.nl ([194.134.71.11]) by icgbdc002.icgroup.nl
  with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.1960.3)
id
  LDWFK3CD; Tue, 1 Jun 1999 02​:03​:19 +0200
Received​: from p025.spy.euronet.nl by icgned.icgroup.nl (NX5.67e/NX3.0S)
  id AA07110; Tue, 1 Jun 99 02​:04​:21 +0200
Message-Id​: <9906010004.AA07110@​icgned.icgroup.nl>
Received​: by bombadil (NX5.67g/NX3.0X) id AA01439; Tue, 1 Jun 1999
  02​:04​:19 +0200
Date​: Tue, 1 Jun 1999 02​:04​:19 +0200
To​: perlbug@​perl.com
Subject​: Not OK​: perl 5.00557 on OPENSTEP-Mach 4_2 (UNINSTALLED)
Reply-To​: hansmu@​xs4all.nl

This is a build failure report for perl from hansmu@​xs4all.nl,
generated with the help of perlbug 1.26 running under perl 5.00557.

5.005_57 doesn't compile on NeXT. There are three problems​:

1. util.c assumes that a platfrom that has fcntl and SETFD must also have
  FD_CLOEXEC. Alas, NeXT has the close-on-exec feature, but not the macro.

  The patch below assumes that the value 1 will work on all platforms
  where FD_CLOEXEC is not defined.

2. Andy Dougherty's my_fflush_all() patch contains too many '#'s. Gcc sez​:

  util.c​:3340​: undefined or invalid # directive
  util.c​:3343​: undefined or invalid # directive
  util.c​:3346​: undefined or invalid # directive

3. NDBM_File tries to #define dbm_error and dbm_clearerr. This fails on
  platform where dbm_error and dbm_clearerr are macroes #defined in
<ndbm.h>

After applying the patch below, _57 passes all tests.

-- HansM

Files affected​: ext/NDBM_File/NDBM_File.xs

Index​: util.c
--- util.c.orig Tue May 25 11​:07​:32 1999
*** util.c Tue Jun 1 01​:19​:01 1999
@​@​ -62,6 +62,10 @​@​

#endif

+#if defined(HAS_FCNTL) && defined(F_SETFD) && !defined(FD_CLOEXEC)
+#define FD_CLOEXEC 1
+#endif
+
/* paranoid version of system's malloc() */

/* NOTE​: Do not call the next three routines directly. Use the macros
@​@​ -3337,13 +3341,13 @​@​
  open_max = sysconf(_SC_OPEN_MAX);
# else
# ifdef FOPEN_MAX
-# open_max = FOPEN_MAX;
+ open_max = FOPEN_MAX;
# else
# ifdef OPEN_MAX
-# open_max = OPEN_MAX;
+ open_max = OPEN_MAX;
# else
# ifdef _NFILE
-# open_max = _NFILE;
+ open_max = _NFILE;
# endif
# endif
# endif
Index​: ext/NDBM_File/NDBM_File.xs
--- ext/NDBM_File/NDBM_File.xs.orig Fri May 7 05​:43​:25 1999
*** ext/NDBM_File/NDBM_File.xs Mon May 31 21​:12​:36 1999
@​@​ -103,15 +103,19 @​@​
  NDBM_File db
  datum_key key

-#define dbm_error(db) dbm_error(db->dbp)
int
dbm_error(db)
  NDBM_File db
+ CODE​:
+ RETVAL = dbm_error(db->dbp) ;
+ OUTPUT​:
+ RETVAL

-#define dbm_clearerr(db) dbm_clearerr(db->dbp)
void
dbm_clearerr(db)
  NDBM_File db
+ CODE​:
+ dbm_clearerr(db->dbp) ;

#define setFilter(type) \

---

Site configuration information for perl 5.00557​:

Configured by hansm at Wed May 26 20​:58​:02 MET DST 1999.

Summary of my perl5 (revision 5.0 version 5 subversion 57) configuration​:
  Platform​:
  osname=next, osvers=4_2, archname=OPENSTEP-Mach
  uname='bombadil '
  config_args='-des -Dcf_email=hansmu@​xs4all.nl -Dprefix=/usr/local
-Doptimize=-g -O'
  hint=recommended, useposix=undef, d_sigaction=undef
  usethreads=undef useperlio=undef d_sfio=undef
  use64bits=undef usemultiplicity=undef
  Compiler​:
  cc='cc', optimize='-g -O', gccversion=NeXT DevKit-based CPP 4.0
  cppflags='-dynamic -fno-common -DUSE_NEXT_CTYPE -DUSE_PERL_SBRK -arch
m68k -DDEBUGGING -I/usr/local/include'
  ccflags ='-dynamic -fno-common -DUSE_NEXT_CTYPE -DUSE_PERL_SBRK -arch
m68k -arch i386 -DDEBUGGING -I/usr/local/include'
  stdchar='char', d_stdstdio=define, usevfork=false
  intsize=4, longsize=4, ptrsize=4, doublesize=8
  d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
  alignbytes=8, usemymalloc=y, prototype=define
  Linker and Libraries​:
  ld='cc', ldflags ='-dynamic -prebind -arch m68k -arch i386
-L/usr/local/lib'
  libpth=/lib /usr/lib /usr/local/lib
  libs=
  libc=/NextLibrary/Frameworks/System.framework/System, so=dylib,
useshrplib=true, libperl=libperl.5.dylib
  Dynamic Linking​:
  dlsrc=dl_next.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
  cccdlflags=' ', lddlflags='-dynamic -bundle -undefined suppress -arch
m68k -arch i386 -L/usr/local/lib'

Locally applied patches​:
 

---

@​INC for perl 5.00557​:
  lib
  /Users/hansm/lib/perl
  /usr/local/lib/perl5/5.00557/OPENSTEP-Mach
  /usr/local/lib/perl5/5.00557
  /usr/local/lib/perl5/site_perl/5.00557/OPENSTEP-Mach
  /usr/local/lib/perl5/site_perl/5.00557
  .

---

Environment for perl 5.00557​:
  HOME=/Users/hansm
  LANG (unset)
  LANGUAGE (unset)
  LD_LIBRARY_PATH (unset)
  LOGDIR (unset)

PATH=/Users/hansm/bin​:/usr/local/bin​:/usr/games​:/usr/ucb​:/bin​:/usr/bin​:/usr/
etc​:/Users/hansm/bin/cookies​:/LocalApps/Opener.app​:.
  PERL5LIB=/Users/hansm/lib/perl
  PERL_BADLANG (unset)
  SHELL=/bin/sh

[p5pRT]

From [Unknown Contact. See original ticket]

tron (please ignore)​: looking at the reply...

---

Richard Foley
richard@​rfi.net