Skip to content

Pivosgroup/xbmc-android-old

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

- Setup TFTP Server 
sudo apt-get install tftpd-hpa
check /etc/default/tftpd-hpa for TFTP_OPTIONS="-s" or TFTP_OPTIONS="--secure", add it if not
sudo /etc/init.d/tftpd-hpa restart

- Setup NFS Server
sudo apt-get install nfs-kernel-server
add to /etc/exports and change 192.168.2 to match your local net setup
/opt/aml-rootfs 192.168.2.0/255.255.255.0(rw,sync,no_root_squash,no_all_squash,anonuid=0,anongid=0,no_subtree_check)
sudo mkdir -p /opt/aml-rootfs
sudo /etc/init.d/nfs-kernel-server restart

# Checkout and build the buildroot rootfs.
# The bootable rootfs is assumed to be going to /opt/aml-root.

 git clone git@github.com:Pivosgroup/buildroot-linux.git
 make amlogic_atv300-xbmc_defconfig
 make
 sudo cp output/images/uImage /var/lib/tftpboot/
 sudo tar -C /opt/aml-rootfs -xf output/images/rootfs.tar.gz

# Change setup-sdk.sh to reflect your paths for BUILDROOT and TARBALLS;
 cd tools/amlogic
 nano setup-sdk.sh 
 ./setup-sdk.sh
 cd ../../
 
Build xbmc depend libs
 make -C tools/amlogic/depends

# Build XBMC
 make

# Install XBMC (goes into /opt/xbmc-aml)
 sudo make install
 
# To boot the amlogic board:
 attach usb/serial-ttl to pin white connector (pwr , tx, gnd, and rx)
 picocom --baud=115200 /dev/ttyUSB0
 power up and do a few returns to halt the boot.

# Change the boot vars to (change IPs to reflect your setup),
# You only need to do this once as the setting will get saved:
 setenv machid 2956
 setenv serverip 192.168.2.200
 setenv gatewayip 192.168.2.1
 setenv ipaddr 192.168.2.214
 setenv bootargs root=/dev/nfs nfsroot=192.168.2.200:/opt/aml-rootfs rw noinitrd ip=192.168.2.214:192.168.2.200:192.168.2.1:255.255.255.0:target:eth0:off console=ttyS0,115200 a9_clk=800M clk81=200000k
 saveenv

# Do a tftpboot from the server:
 tftpboot 0x82000000 uImage;bootm 0x82000000

# To restore android kernel boot:
  setenv machid 2957
  saveenv

# Run XBMC on amlogic box
 mkdir -p /opt/xbmc-aml
 mount -t nfs -o nolock,rw 192.168.2.200:/opt/xbmc-aml /opt/xbmc-aml
 mount -t usbfs none /proc/bus/usb
 export XBMC_HOME=/opt/xbmc-aml/share/xbmc
 export PATH=$PATH:/opt/xbmc-aml/bin
 export LD_LIBRARY_PATH=/opt/xbmc-aml/lib:/usr/local/lib:/usr/lib:/lib
 ln -sf /opt/xbmc-aml/lib/mysql/libmysqlclient.so.16 /opt/xbmc-aml/lib/libmysqlclient.so.16
 amremote_config /etc/xbmc/remote.conf

 /opt/xbmc-aml/lib/xbmc/xbmc.bin


 cat /.xbmc/temp/xbmc.log

# Run a swapfile on SDCard:
 mkdir -p /home/amlogic/tmp
 mount /dev/sda1 /home/amlogic/tmp
 dd if=/dev/zero of=/home/amlogic/tmp/swapfile1 bs=1024 count=524288
 mkswap /home/amlogic/tmp/swapfile1
 swapon /home/amlogic/tmp/swapfile1
 free


# How to boot kernel/rootfs from SDCard:
 http://openlinux.amlogic.com/wiki/index.php/Arm/Platform_Info/Information_for_8726M/Burn_system_for_8726M_Howto

 mkdir fat32
 sudo mount /dev/sdb1 fat32
 cp /var/lib/tftpboot/uImage fat32/
 sudo umount fat32
 rmdir fat32

 mkdir ext2
 sudo mkfs.ext2 /dev/sdb2
 sudo mount /dev/sdb2 ext2
 sudo rsync -a --exclude .xbmc /opt/aml-rootfs/ ext2
 sudo rsync -a --exclude-from=tools/amlogic/packaging/excludes.txt /opt/xbmc-aml/ ext2/opt/xbmc-aml
 sudo cp -f tools/amlogic/packaging/etc/init.d/S100xbmc ext2/etc/init.d/S100xbmc
 sudo cp -f tools/amlogic/packaging/etc/network/interfaces ext2/etc/network/interfaces
 sudo umount ext2
 rmdir ext2

 setenv bootcmd 'mmc init;mmcinfo;fatload mmc 0:1 82000000 uImage;bootm 82000000;'
 setenv bootargs 'console=tty0 console=ttyS0,115200n8 root=/dev/cardblksd2 rw rootfstype=ext2 init=/init rootwait'
 saveenv
 boot

About

No description, website, or topics provided.

Resources

License

Unknown, Unknown licenses found

Licenses found

Unknown
copying.txt
Unknown
LICENSE.GPL

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published