Skip to content

PrincetonCompMemLab/neurodiff_emergent

Repository files navigation

emergent reboot in Go

Go Report Card GoDoc Travis

This is the new home of the emergent neural network simulation software, developed primarily by the CCN lab, originally at CU Boulder, and now at UC Davis: https://ccnlab.org. We have decided to completely reboot the entire enterprise from the ground up, with a much more open, general-purpose design and approach.

See Wiki Install for installation instructions (note: Go 1.13 and newer are now required!), and the Wiki Rationale and History pages for a more detailed rationale for the new version of emergent, and a history of emergent (and its predecessors).

See the ra25 example in the leabra package for a complete working example (intended to be a good starting point for creating your own models), and any of the 26 models in the Comp Cog Neuro sims repository which also provide good starting points. See the etable wiki for docs and example code for the widely-used etable data table structure, and the family_trees example in the CCN textbook sims which has good examples of many standard network representation analysis techniques (PCA, cluster plots, RSA).

See python README and Python Wiki for info on using Python to run models. See eTorch for how to get an interactive 3D NetView for PyTorch models.

Current Status / News

  • Nov 2020: Full Python conversions of CCN sims complete, and eTorch for viewing and interacting with PyTorch models.

  • April 2020: Version 1.0 of GoGi GUI is now released, and we have updated all module dependencies accordingly. We now recommend using the go modules instead of GOPATH -- the Wiki Install instructions have been updated accordingly.

  • 12/30/2019: Version 1.0.0 released! The Comp Cog Neuro sims that accompany the CCN Textbook are now complete and have driven extensive testing and bugfixing.

  • 3/2019: Python interface is up and running! See the python directory in leabra for the README status and how to give it a try. You can run the full leabra/examples/ra25 code using Python, including the GUI etc.

  • 2/2019: Initial implementation and benchmarking (see examples/bench for details -- shows that the Go version is comparable in speed to C++).

Key Features

  • Currently focused exclusively on implementing the biologically-based Leabra algorithm, which is not at all suited to implementation in current popular neural network frameworks such as PyTorch. Leabra uses point-neurons and competitive inhibition, and has sparse activity levels and ubiquitous fully recurrent bidirectional processing, which enable / require novel optimizations for how simulated neurons communicate, etc.

  • Go-based code can be compiled to run entire models. Instead of creating and running everything in the emergent GUI, the process is much more similar to how e.g., PyTorch and other current frameworks work. You write code to configure your model, and directly call functions that run your model, etc. This gives you full, direct, transparent control over everything that happens in your model, as opposed to the previous highly opaque nature of C++ emergent.

  • Although we will be updating our core library (package in Go) code with bug fixes, performance improvements, and new algorithms, we encourage users who have invested in developing a particular model to fork their own copy of the codebase and use that to maintain control over everything. Once we make our official release of the code, the raw algorithm code is essentially guaranteed to remain fairly stable and encapsulated, so further changes should be relatively minimal, but nevertheless, it would be good to have an insurance policy! The code is very compact and having your own fork should be easily manageable.

  • The emergent repository will host additional Go packages that provide support for models. These are all designed to be usable as independently and optionally as possible. An overview of some of those packages is provided below.

  • The system is fully usable from within Python -- see the Python Wiki. This includes interoperating with PyTorch via eTorch, and PsyNeuLink to make Leabra models accessible in that framework, and vice-versa. Furthermore, interactive, IDE-level tools such as Jupyter and nteract can be used to interactively develop and analyze the models, etc.

  • We are leveraging the GoGi Gui to provide interactive 2D and 3D GUI interfaces to models, capturing the essential functionality of the original C++ emergent interface, but in a much more a-la-carte fashion. We also use and support the GoNum framework for analyzing and plotting results within Go.

Design / Organization

  • The emergent repository contains a collection of packages supporting the implementation of biologically-based neural networks. The main package is emer which specifies a minimal abstract interface for a neural network. The etable etable.Table data structure (DataTable in C++) is in a separate repository under the overall emer project umbrella, as are specific algorithms such as leabra which implement the emer interface.

  • Go uses interfaces to represent abstract collections of functionality (i.e., sets of methods). The emer package provides a set of interfaces for each structural level (e.g., emer.Layer etc) -- any given specific layer must implement all of these methods, and the structural containers (e.g., the list of layers in a network) are lists of these interfaces. An interface is implicitly a pointer to an actual concrete object that implements the interface.

  • To allow for specialized algorithms to extend the basic Leabra algorithm functionality, we have additional algorithm-specific interfaces in leabra/leabra/leabra.go, called LeabraNetwork, LeabraLayer, and LeabraPrjn -- all functions should go through this interface so that the final actual function called can be either the default version defined on leabra.Layer or a more specialized type (e.g., for simulating the PFC, hippocampus, BG etc). This is what it looks like for example:

func (nt *Network) InitActs() {
	for _, ly := range nt.Layers {
		if ly.IsOff() {
			continue
		}
		ly.(LeabraLayer).InitActs() // ly is the emer.Layer interface -- convert to (LeabraLayer) interface
	}
}
  • The emer interfaces are designed to support generic access to network state, e.g., for the 3D network viewer, but specifically avoid anything algorithmic. Thus, they allow viewing of any kind of network, including PyTorch backprop nets in the eTorch package.

  • There are 3 main levels of structure: Network, Layer and Prjn (projection). The Network calls methods on its Layers, and Layers iterate over both Neuron data structures (which have only a minimal set of methods) and the Prjns, to implement the relevant computations. The Prjn fully manages everything about a projection of connectivity between two layers, including the full list of Syanpse elements in the connection. There is no "ConGroup" or "ConState" level as was used in C++, which greatly simplifies many things. The Layer also has a set of Pool elements, one for each level at which inhibition is computed (there is always one for the Layer, and then optionally one for each Sub-Pool of units (Pool is the new simpler term for "Unit Group" from C++ emergent).

  • Layers have a Shape property, using the etensor.Shape type (see etable package), which specifies their n-dimensional (tensor) shape. Standard layers are expected to use a 2D Y*X shape (note: dimension order is now outer-to-inner or RowMajor now), and a 4D shape then enables Pools ("unit groups") as hypercolumn-like structures within a layer that can have their own local level of inihbition, and are also used extensively for organizing patterns of connectivity.

Packages

Here are some of the additional supporting packages, most important first then alphabetically:

  • emer only has the primary abstract Network interfaces.

  • params has the parameter-styling infrastructure (e.g., params.Set, params.Sheet, params.Sel), which implement a powerful, flexible, and efficient CSS style-sheet approach to parameters. See the Wiki Params page for more info.

  • env has an interface for environments, which encapsulates all the counters and timing information for patterns that are presented to the network, and enables more of a mix-and-match ability for using different environments with different networks. See Wiki Env page for more info, and the envs repository for various specialized environments that can be a good starting point.

  • netview provides the NetView interactive 3D network viewer, implemented in the GoGi 3D framework.

  • prjn is a separate package for defining patterns of connectivity between layers (i.e., the ProjectionSpecs from C++ emergent). This is done using a fully independent structure that only knows about the shapes of the two layers, and it returns a fully general bitmap representation of the pattern of connectivity between them. The leabra.Prjn code then uses these patterns to do all the nitty-gritty of connecting up neurons. This makes the projection code much simpler compared to the ProjectionSpec in C++ emergent, which was involved in both creating the pattern and also all the complexity of setting up the actual connections themselves. This should be the last time any of those projection patterns need to be written (having re-written this code too many times in the C++ version as the details of memory allocations changed).

  • relpos provides relative positioning of layers (right of, above, etc).

  • weights provides weight-file parsing / loading routines: much easier to read into a temporary structure and then apply to the network.

  • patgen supports various general-purpose pattern-generation algorithms, as implemented in taDataGen in C++ emergent (e.g., PermutedBinary and FlipBits).

  • efuns has misc special functions such as Gaussian and Sigmoid.

  • erand has misc random-number generation support functionality, including erand.RndParams for parameterizing the type of random noise to add to a model, and easier support for making permuted random lists, etc.

  • esg is the emergent stochastic / sentence generator -- parses simple grammars that generate random events (sentences) -- can be a good starting point for generating more complex environments.

  • evec has Vec2i which uses plain int X, Y fields, whereas the mat32 package uses int32 which are needed for graphics but int is more convenient in models.

  • popcode supports the encoding and decoding of population codes -- distributed representations of numeric quantities across a population of neurons. This is the ScalarVal functionality from C++ emergent, but now completely independent of any specific algorithm so it can be used anywhere.

  • ringidx provides a wrap-around ring index for efficient use of a fixed buffer that overwrites the oldest items without any copying.

  • stepper provides dynamic stepping control at multiple levels -- used in pvlv model (contributed by Randy Gobbel).

  • timer is a simple interval timing struct, used for benchmarking / profiling etc.

Repositories

Here are the other repositories within emer that provide additional, optional elements for simulations:

  • etable repository holds all of the more general-purpose "DataTable" or DataFrame (etable.Table) related code, which is our version of something like pandas or xarray in Python. This includes the etensor n-dimensional array, eplot for interactive plotting of data, and basic utility packages like minmax and bitslice, and lots of data analysis tools like similarity / distance matricies, PCA, cluster plots, etc.

  • eMPI provides an MPI (message passing interface) distributed memory implementation -- see MPI Wiki page

  • envs has misc standalone environments that can be good starting points, including managing files, visual images, etc.

  • etail is the emergent tail program -- a separate command-line tool for looking at tabular (csv, tsv, etc) log files from simulations -- very useful! go get github.com/emer/etail from anywhere to install (in go modules mode).

  • eTorch is the emergent interface to PyTorch models, providing emergent GUI NetView etc for these models.

  • eve is the emergent virtual environment -- provides a physics engine and collision detection that interfaces with the GoGi 3D for visualization. For constructing more realistic environments for your models!

  • grunt is the git-based run tool -- it handles the grunt work for running simulations on a cluster, by pushing to git repositories hosted on the cluster, which has a daemon running on it monitoring for these git updates. It pushes back updates and results from the cluster. There is a GUI for controlling and managing a potentially large history of jobs -- invaluable for any significant simulation to keep track of various parameter searches, changes over time etc.

  • vision and auditory provide low-level filtering on sensory inputs reflecting corresponding biological mechanisms.

TODO

Last updated: Nov 2020. This list used to be much longer!

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published