Dkimsigner on 2 servers #370
Comments
|
If you mean cluster/DAG by "mirror", than yes you have to install it on both of your servers. you can choose to use one certificate for each server (than you need two DNS entries - selectors) or you use the same certificate on both, than you need just one selector. |
|
BTW: you can't use v3.4 because it dropped Exchange 2010 support. |
|
Hello Deckard99, I am currently setting up a DAG as well and I use the same SSL certificate in both Exchange servers. I copied the "keys" folder after install on the DAG but it fails to load (there is no entry in the Domains window. How could I just use the same keys on both servers? Thank you! |
|
You have to copy the settings file as well. not just the keys |
|
Working now sorry. I had to restart the Transport service.
Great job!
Thank you!
Jose Dubois
C : (587) 830-3361
From: Deckard99 ***@***.***>
Sent: September 30, 2022 7:19 AM
To: Pro/dkim-exchange ***@***.***>
Cc: Jose Dubois ***@***.***>; Comment ***@***.***>
Subject: Re: [Pro/dkim-exchange] Dkimsigner on 2 servers (Issue #370)
You have to copy the settings file as well. not just the keys
—
Reply to this email directly, view it on GitHub<#370 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/A3LDQ7D2N6CQG7VZ44RI5FDWA3SE3ANCNFSM53SKPICA>.
You are receiving this because you commented.Message ID: ***@***.******@***.***>>
|
|
Hi! Thanks. I did, in fact t copied the entire directory content agter installation to be sure but still no domains on the DAG servers.
Sent from my Bell Samsung device over Canada's largest network.
…-------- Original message --------
From: Deckard99 ***@***.***>
Date: 2022-09-30 7:19 a.m. (GMT-07:00)
To: Pro/dkim-exchange ***@***.***>
Cc: Jose Dubois ***@***.***>, Comment ***@***.***>
Subject: Re: [Pro/dkim-exchange] Dkimsigner on 2 servers (Issue #370)
You have to copy the settings file as well. not just the keys
—
Reply to this email directly, view it on GitHub<#370 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/A3LDQ7D2N6CQG7VZ44RI5FDWA3SE3ANCNFSM53SKPICA>.
You are receiving this because you commented.Message ID: ***@***.***>
|
|
In my case, i got a Exchange CAS server (i.e. CAS01) and two mailbox database server (say it MDB01 and MDB02). I don't know which server i need to install the DKIM? I tried to install it on top of CAS01 and it seems that i stop at the step of "Restarting Exchange Transport Service". If i installed DKIM on both database server, then i need to have two TXT entries in the public DNS record ?? |
|
Howdy,
You'll need to install it on both mailbox servers unless your Send
Connector(s) for external mail has been scoped to a specific server.
You can either share the same signing key between both mailbox servers or
set up a signing key per mailbox server (different selectors for each)
which will require two TXT records in public DNS for DKIM verification.
…On Mon, 13 May 2024 at 13:23, ericwpl ***@***.***> wrote:
In my case, i got a Exchange CAS server (i.e. CAS01) and two mailbox
database server (say it MDB01 and MDB02). I don't know which server i need
to install the DKIM? I tried to install it on top of CAS01 and it seems
that i stop at the step of "Restarting Exchange Transport Service". If i
installed DKIM on both database server, then i need to have two TXT entries
in the public DNS record ??
—
Reply to this email directly, view it on GitHub
<#370 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AEEHYXKIDJ7K4NAXDVMDBE3ZCAW3DAVCNFSM53SKPICKU5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TEMJQGY2TMMZXGMYA>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
--
Regards,
Chris Knight
|
|
Hi Chris Knight
Thanks for your prompt reply. I had successfully installed it on both
mail server and I worked without any problem. Million Thanks !
Regards/Eric
On Tue, May 14, 2024 at 2:23 PM Chris Knight ***@***.***>
wrote:
… Howdy,
You'll need to install it on both mailbox servers unless your Send
Connector(s) for external mail has been scoped to a specific server.
You can either share the same signing key between both mailbox servers or
set up a signing key per mailbox server (different selectors for each)
which will require two TXT records in public DNS for DKIM verification.
On Mon, 13 May 2024 at 13:23, ericwpl ***@***.***> wrote:
> In my case, i got a Exchange CAS server (i.e. CAS01) and two mailbox
> database server (say it MDB01 and MDB02). I don't know which server i
need
> to install the DKIM? I tried to install it on top of CAS01 and it seems
> that i stop at the step of "Restarting Exchange Transport Service". If i
> installed DKIM on both database server, then i need to have two TXT
entries
> in the public DNS record ??
>
> —
> Reply to this email directly, view it on GitHub
> <#370 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AEEHYXKIDJ7K4NAXDVMDBE3ZCAW3DAVCNFSM53SKPICKU5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TEMJQGY2TMMZXGMYA>
> .
> You are receiving this because you are subscribed to this thread.Message
> ID: ***@***.***>
>
--
Regards,
Chris Knight
—
Reply to this email directly, view it on GitHub
<#370 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A54IMZXLZ3VGYEURD6TJOVDZCGUUVAVCNFSM53SKPICKU5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TEMJQHEZTONZVGQ2A>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Versions
Description
Hi,
If I have two mail servers that work in mirror, do I have to install the plugin on both?
The text was updated successfully, but these errors were encountered: