boards: drop LED init

This is handled by periph_init_leds now
RIOT-OS · Feb 17, 2022 · 7882f81 · 7882f81
1 parent 43a8eb5
commit 7882f81
Show file tree

Hide file tree

Showing 184 changed files with 163 additions and 966 deletions.
diff --git a/boards/6lowpan-clicker/clicker.c b/boards/6lowpan-clicker/clicker.c
@@ -15,12 +15,6 @@ extern void dummy(void);
 
 void board_init(void)
 {
-    /* Turn off all LED's */
-    gpio_init(LED1_PIN, GPIO_OUT);
-    gpio_init(LED2_PIN, GPIO_OUT);
-    LED1_OFF;
-    LED2_OFF;
-
     /* Stop the linker from throwing away the PIC32 config register settings */
     dummy();
 }
diff --git a/boards/Kconfig b/boards/Kconfig
@@ -15,3 +15,66 @@ config MODULE_BOARD
     depends on TEST_KCONFIG
     help
         Module which holds all board-specific files.
+
+config MODULE_AUTO_INIT_LEDS
+    bool
+    default y
+    depends on TEST_KCONFIG
+    help
+        Enable auto initalization of board leds
+
+config MODULE_AUTO_INIT_LED0
+    bool
+    default y
+    depends on TEST_KCONFIG
+    help
+        Enable auto initalization of LED0 if present
+
+config MODULE_AUTO_INIT_LED1
+    bool
+    default y
+    depends on TEST_KCONFIG
+    help
+        Enable auto initalization of LED1 if present
+
+config MODULE_AUTO_INIT_LED2
+    bool
+    default y
+    depends on TEST_KCONFIG
+    help
+        Enable auto initalization of LED2 if present
+
+config MODULE_AUTO_INIT_LED3
+    bool
+    default y
+    depends on TEST_KCONFIG
+    help
+        Enable auto initalization of LED3 if present
+
+config MODULE_AUTO_INIT_LED4
+    bool
+    default y
+    depends on TEST_KCONFIG
+    help
+        Enable auto initalization of LED4 if present
+
+config MODULE_AUTO_INIT_LED5
+    bool
+    default y
+    depends on TEST_KCONFIG
+    help
+        Enable auto initalization of LED5 if present
+
+config MODULE_AUTO_INIT_LED6
+    bool
+    default y
+    depends on TEST_KCONFIG
+    help
+        Enable auto initalization of LED6 if present
+
+config MODULE_AUTO_INIT_LED7
+    bool
+    default y
+    depends on TEST_KCONFIG
+    help
+        Enable auto initalization of LED7 if present
diff --git a/boards/acd52832/board.c b/boards/acd52832/board.c
@@ -23,7 +23,4 @@
 
 void board_init(void)
 {
-    /* initialize the boards LEDs */
-    gpio_init(LED0_PIN, GPIO_OUT);
-    gpio_set(LED0_PIN);
 }
diff --git a/boards/adafruit-clue/board.c b/boards/adafruit-clue/board.c
@@ -25,9 +25,6 @@
 
 void board_init(void)
 {
-    /* initialize the boards LEDs */
-    gpio_init(LED0_PIN, GPIO_OUT); /* Red LED */
-
     /* initialize the screen backlight, turn it off by default */
     gpio_init(BACKLIGHT_PIN, GPIO_OUT);
     gpio_clear(BACKLIGHT_PIN);

diff --git a/boards/adafruit-itsybitsy-m4/board.c b/boards/adafruit-itsybitsy-m4/board.c
@@ -56,7 +56,4 @@ mtd_dev_t *mtd0 = (mtd_dev_t *)&samd51_nor_dev;
 
 void board_init(void)
 {
-    /* initialize the on-board LED */
-    gpio_init(LED0_PIN, GPIO_OUT);
-    LED0_OFF;
 }
diff --git a/boards/adafruit-itsybitsy-nrf52/board.c b/boards/adafruit-itsybitsy-nrf52/board.c
@@ -24,7 +24,4 @@
 
 void board_init(void)
 {
-    /* initialize the board's single LED */
-    gpio_init(LED0_PIN, GPIO_OUT);
-    gpio_set(LED0_PIN);
 }
diff --git a/boards/alientek-pandora/board.c b/boards/alientek-pandora/board.c
@@ -23,8 +23,4 @@
 
 void board_init(void)
 {
-    /* initialize LEDs */
-    gpio_init(LED0_PIN, GPIO_OUT);
-    gpio_init(LED1_PIN, GPIO_OUT);
-    gpio_init(LED2_PIN, GPIO_OUT);
 }
diff --git a/boards/arduino-leonardo/board.c b/boards/arduino-leonardo/board.c
@@ -19,11 +19,7 @@
  */
 
 #include "board.h"
-#include "cpu.h"
-
-void led_init(void);
 
 void board_init(void)
 {
-    led_init();
 }
diff --git a/boards/arduino-leonardo/led_init.c b/boards/arduino-leonardo/led_init.c
diff --git a/boards/arduino-nano-33-ble/board.c b/boards/arduino-nano-33-ble/board.c
@@ -25,14 +25,4 @@
 
 void board_init(void)
 {
-    /* initialize the boards LEDs */
-    gpio_init(LED0_PIN, GPIO_OUT); /* Orange LED */
-    gpio_init(LED1_PIN, GPIO_OUT); /* Red LED */
-    gpio_set(LED1_PIN);
-    gpio_init(LED2_PIN, GPIO_OUT); /* Green LED */
-    gpio_set(LED2_PIN);
-    gpio_init(LED3_PIN, GPIO_OUT); /* Blue LED */
-    gpio_set(LED3_PIN);
-    gpio_init(LED4_PIN, GPIO_OUT); /* PWR LED */
-    gpio_clear(LED4_PIN);
 }
diff --git a/boards/arduino-nano-33-iot/board.c b/boards/arduino-nano-33-iot/board.c
@@ -23,6 +23,4 @@
 
 void board_init(void)
 {
-    /* initialize the on-board "Yellow" LED */
-    gpio_init(LED0_PIN, GPIO_OUT);
 }
diff --git a/boards/atmega256rfr2-xpro/led_init.c b/boards/atmega256rfr2-xpro/led_init.c
diff --git a/boards/avr-rss2/led_init.c b/boards/avr-rss2/led_init.c
diff --git a/boards/b-l072z-lrwan1/Kconfig b/boards/b-l072z-lrwan1/Kconfig
@@ -34,4 +34,7 @@ config BOARD_B_L072Z_LRWAN1
 
     select HAVE_SAUL_GPIO
 
+config MODULE_PERIPH_INIT_LED0
+    default n if MODULE_PERIPH_SPI
+
 source "$(RIOTBOARD)/common/stm32/Kconfig"
diff --git a/boards/b-l072z-lrwan1/Makefile.dep b/boards/b-l072z-lrwan1/Makefile.dep
@@ -5,3 +5,8 @@ endif
 ifneq (,$(filter saul_default,$(USEMODULE)))
   USEMODULE += saul_gpio
 endif
+
+ifneq (,$(filter periph_spi,$(USEMODULE)))
+  # The LED pin is also used for SPI
+  DISABLE_MODULE += periph_init_led0
+endif
diff --git a/boards/b-l072z-lrwan1/board.c b/boards/b-l072z-lrwan1/board.c
@@ -28,14 +28,4 @@ void board_init(void)
     gpio_init(RADIO_TCXO_VCC_PIN, GPIO_OUT);
     gpio_set(RADIO_TCXO_VCC_PIN);
 #endif
-
-#ifdef AUTO_INIT_LED0
-    /* The LED pin is also used for SPI, so we enable it
-       only if explicitly wanted by the user */
-    gpio_init(LED0_PIN, GPIO_OUT);
-#endif
-
-    gpio_init(LED1_PIN, GPIO_OUT);
-    gpio_init(LED2_PIN, GPIO_OUT);
-    gpio_init(LED3_PIN, GPIO_OUT);
 }
diff --git a/boards/b-l072z-lrwan1/include/gpio_params.h b/boards/b-l072z-lrwan1/include/gpio_params.h
@@ -31,7 +31,7 @@ extern "C" {
  */
 static const  saul_gpio_params_t saul_gpio_params[] =
 {
-#ifdef AUTO_INIT_LED0
+#ifdef MODULE_PERIPH_INIT_LED0
     {
         .name = "LD2(red)",
         .pin = LED0_PIN,

diff --git a/boards/b-l475e-iot01a/Kconfig b/boards/b-l475e-iot01a/Kconfig
@@ -36,4 +36,7 @@ config BOARD_B_L475E_IOT01A
     select HAVE_LPS22HB
     select HAVE_LSM6DSL
 
+config MODULE_PERIPH_INIT_LED0
+    default n if MODULE_PERIPH_SPI
+
 source "$(RIOTBOARD)/common/stm32/Kconfig"
diff --git a/boards/b-l475e-iot01a/Makefile.dep b/boards/b-l475e-iot01a/Makefile.dep
@@ -5,3 +5,8 @@ ifneq (,$(filter saul_default,$(USEMODULE)))
   USEMODULE += lps22hb
   USEMODULE += lsm6dsl
 endif
+
+ifneq (,$(filter periph_spi,$(USEMODULE)))
+  # The LED pin is also used for SPI
+  DISABLE_MODULE += periph_init_led0
+endif
diff --git a/boards/b-l475e-iot01a/board.c b/boards/b-l475e-iot01a/board.c
@@ -23,9 +23,4 @@
 
 void board_init(void)
 {
-#ifdef AUTO_INIT_LED0
-    /* The LED pin is also used for SPI, so we enable it
-       only if explicitly wanted by the user */
-    gpio_init(LED0_PIN, GPIO_OUT);
-#endif
 }
diff --git a/boards/b-l475e-iot01a/include/gpio_params.h b/boards/b-l475e-iot01a/include/gpio_params.h
@@ -31,7 +31,7 @@ extern "C" {
  */
 static const  saul_gpio_params_t saul_gpio_params[] =
 {
-#ifdef AUTO_INIT_LED0
+#ifdef MODULE_PERIPH_INIT_LED0
     /* The LED pin is also used for SPI, so we enable it
        only if explicitly wanted by the user */
     {

diff --git a/boards/b-u585i-iot02a/Kconfig b/boards/b-u585i-iot02a/Kconfig
@@ -25,4 +25,7 @@ config BOARD_B_U585I_IOT02A
     select HAVE_HTS221
     select HAVE_LPS22HH
 
+config MODULE_PERIPH_INIT_LED0
+    default n if MODULE_PERIPH_SPI
+
 source "$(RIOTBOARD)/common/stm32/Kconfig"
diff --git a/boards/b-u585i-iot02a/Makefile.dep b/boards/b-u585i-iot02a/Makefile.dep
@@ -3,3 +3,8 @@ ifneq (,$(filter saul_default,$(USEMODULE)))
   USEMODULE += hts221
   USEMODULE += lps22hh
 endif
+
+ifneq (,$(filter periph_spi,$(USEMODULE)))
+  # The LED pin is also used for SPI
+  DISABLE_MODULE += periph_init_led0
+endif
diff --git a/boards/b-u585i-iot02a/board.c b/boards/b-u585i-iot02a/board.c
@@ -23,11 +23,4 @@
 
 void board_init(void)
 {
-#ifdef AUTO_INIT_LED0
-    /* The LED pin is also used for SPI, so we enable it
-       only if explicitly wanted by the user */
-    gpio_init(LED0_PIN, GPIO_OUT);
-#endif
-    gpio_init(LED1_PIN, GPIO_OUT);
-    gpio_init(LED2_PIN, GPIO_OUT);
 }
diff --git a/boards/b-u585i-iot02a/include/gpio_params.h b/boards/b-u585i-iot02a/include/gpio_params.h
@@ -31,7 +31,7 @@ extern "C" {
  */
 static const  saul_gpio_params_t saul_gpio_params[] =
 {
-#ifdef AUTO_INIT_LED0
+#ifdef MODULE_PERIPH_INIT_LED0
     /* The LED pin is also used for SPI, so we enable it
        only if explicitly wanted by the user */
     {

diff --git a/boards/bastwan/board.c b/boards/bastwan/board.c
@@ -31,8 +31,6 @@
 
 void board_init(void)
 {
-    /* initialize the boards LED */
-    gpio_init(LED0_PIN, GPIO_OUT);
 
 #ifdef TX_SWITCH_PWR_PIN
     /* Enables pwr to the Antenna switch circuit */

diff --git a/boards/bluepill-stm32f030c8/board.c b/boards/bluepill-stm32f030c8/board.c
@@ -24,6 +24,4 @@
 
 void board_init(void)
 {
-    gpio_init(LED0_PIN, GPIO_OUT);
-    LED0_OFF;
 }
diff --git a/boards/cc1312-launchpad/board.c b/boards/cc1312-launchpad/board.c
@@ -27,6 +27,4 @@
 
 void board_init(void)
 {
-    gpio_init(LED0_PIN, GPIO_OUT);
-    gpio_init(LED1_PIN, GPIO_OUT);
 }
diff --git a/boards/cc1350-launchpad/board.c b/boards/cc1350-launchpad/board.c
@@ -25,6 +25,4 @@
 
 void board_init(void)
 {
-    gpio_init(LED0_PIN, GPIO_OUT);
-    gpio_init(LED1_PIN, GPIO_OUT);
 }