boards: enable tinyUSB feature

Enables the `tinyusb_device` for boards with only one USB interface, where `highlevel_stdio` uses the USBUS CDC ACM interface so far. If any `tinyusb_device` class is enabled the `highlevel_stdio` uses now `stdio_tinyusb_cdc_acm` instead of the USBUS `stdio_cdc_acm`. Therefore, the `tinyusb_device` feature can be enabled now for such boards.
RIOT-OS · Dec 8, 2022 · b2a2e05 · b2a2e05
1 parent b2c855a
commit b2a2e05
Show file tree

Hide file tree

Showing 40 changed files with 53 additions and 5 deletions.
diff --git a/boards/adafruit-clue/Kconfig b/boards/adafruit-clue/Kconfig
@@ -17,6 +17,7 @@ config BOARD_ADAFRUIT_CLUE
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
     select HAS_HIGHLEVEL_STDIO
+    select HAS_TINYUSB_DEVICE
 
     select HAVE_APDS9960
     select HAVE_BMP280_I2C

diff --git a/boards/adafruit-clue/Makefile.features b/boards/adafruit-clue/Makefile.features
@@ -8,5 +8,6 @@ FEATURES_PROVIDED += periph_usbdev
 
 # Various other features (if any)
 FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
 
 include $(RIOTBOARD)/common/nrf52/Makefile.features
diff --git a/boards/adafruit-itsybitsy-m4/Kconfig b/boards/adafruit-itsybitsy-m4/Kconfig
@@ -22,6 +22,7 @@ config BOARD_ADAFRUIT_ITSYBITSY_M4
     select HAS_PERIPH_TIMER
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
+    select HAS_TINYUSB_DEVICE
     select HAVE_SAUL_GPIO
 
     select HAVE_MTD_SPI_NOR

diff --git a/boards/adafruit-itsybitsy-m4/Makefile.features b/boards/adafruit-itsybitsy-m4/Makefile.features
@@ -2,7 +2,6 @@ CPU = samd5x
 CPU_MODEL = samd51g19a
 
 # Put defined MCU peripherals here (in alphabetical order)
-FEATURES_PROVIDED += highlevel_stdio
 FEATURES_PROVIDED += periph_adc
 FEATURES_PROVIDED += periph_dac
 FEATURES_PROVIDED += periph_i2c
@@ -13,3 +12,7 @@ FEATURES_PROVIDED += periph_spi
 FEATURES_PROVIDED += periph_timer
 FEATURES_PROVIDED += periph_uart
 FEATURES_PROVIDED += periph_usbdev
+
+# Various other features (if any)
+FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
diff --git a/boards/adafruit-itsybitsy-nrf52/Kconfig b/boards/adafruit-itsybitsy-nrf52/Kconfig
@@ -17,6 +17,7 @@ config BOARD_ADAFRUIT_ITSYBITSY_NRF52
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
     select HAS_HIGHLEVEL_STDIO
+    select HAS_TINYUSB_DEVICE
 
     select HAVE_SAUL_GPIO
 

diff --git a/boards/adafruit-itsybitsy-nrf52/Makefile.features b/boards/adafruit-itsybitsy-nrf52/Makefile.features
@@ -8,5 +8,6 @@ FEATURES_PROVIDED += periph_usbdev
 
 # Various other features (if any)
 FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
 
 include $(RIOTBOARD)/common/nrf52/Makefile.features
diff --git a/boards/adafruit-pybadge/Kconfig b/boards/adafruit-pybadge/Kconfig
@@ -22,6 +22,7 @@ config BOARD_ADAFRUIT_PYBADGE
     select HAS_PERIPH_TIMER
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
+    select HAS_TINYUSB_DEVICE
 
     select HAVE_ST7735
     select HAVE_SAUL_GPIO

diff --git a/boards/adafruit-pybadge/Makefile.features b/boards/adafruit-pybadge/Makefile.features
@@ -2,7 +2,6 @@ CPU = samd5x
 CPU_MODEL = samd51j19a
 
 # Put defined MCU peripherals here (in alphabetical order)
-FEATURES_PROVIDED += highlevel_stdio
 FEATURES_PROVIDED += periph_adc
 FEATURES_PROVIDED += periph_dac
 FEATURES_PROVIDED += periph_i2c
@@ -13,3 +12,7 @@ FEATURES_PROVIDED += periph_spi
 FEATURES_PROVIDED += periph_timer
 FEATURES_PROVIDED += periph_uart
 FEATURES_PROVIDED += periph_usbdev
+
+# Various other features (if any)
+FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
diff --git a/boards/arduino-nano-33-ble/Kconfig b/boards/arduino-nano-33-ble/Kconfig
@@ -17,6 +17,7 @@ config BOARD_ARDUINO_NANO_33_BLE
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
     select HAS_HIGHLEVEL_STDIO
+    select HAS_TINYUSB_DEVICE
 
     select HAVE_SAUL_GPIO
 

diff --git a/boards/arduino-nano-33-ble/Makefile.features b/boards/arduino-nano-33-ble/Makefile.features
@@ -8,5 +8,6 @@ FEATURES_PROVIDED += periph_usbdev
 
 # Various other features (if any)
 FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
 
 include $(RIOTBOARD)/common/nrf52/Makefile.features
diff --git a/boards/arduino-nano-33-iot/Kconfig b/boards/arduino-nano-33-iot/Kconfig
@@ -21,6 +21,7 @@ config BOARD_ARDUINO_NANO_33_IOT
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
     select HAS_HIGHLEVEL_STDIO
+    select HAS_TINYUSB_DEVICE
 
     select HAVE_SAUL_GPIO
 

diff --git a/boards/arduino-nano-33-iot/Makefile.features b/boards/arduino-nano-33-iot/Makefile.features
@@ -14,3 +14,4 @@ FEATURES_PROVIDED += periph_usbdev
 
 # Put other features for this board (in alphabetical order)
 FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
diff --git a/boards/bastwan/Kconfig b/boards/bastwan/Kconfig
@@ -21,6 +21,7 @@ config BOARD_BASTWAN
     select HAS_PERIPH_USBDEV
     select HAS_RIOTBOOT
     select HAS_HIGHLEVEL_STDIO
+    select HAS_TINYUSB_DEVICE
 
     select HAVE_SAUL_GPIO
     select HAVE_SX1276
diff --git a/boards/bastwan/Makefile.features b/boards/bastwan/Makefile.features
@@ -15,3 +15,4 @@ FEATURES_PROVIDED += periph_usbdev
 # Put other features for this board (in alphabetical order)
 FEATURES_PROVIDED += riotboot
 FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
diff --git a/boards/common/arduino-mkr/Kconfig b/boards/common/arduino-mkr/Kconfig
@@ -19,6 +19,7 @@ config BOARD_COMMON_ARDUINO_MKR
     select HAS_ARDUINO
     select HAS_ARDUINO_PWM
     select HAS_HIGHLEVEL_STDIO
+    select HAS_TINYUSB_DEVICE
 
     select HAVE_SAUL_GPIO
 

diff --git a/boards/common/arduino-mkr/Makefile.features b/boards/common/arduino-mkr/Makefile.features
@@ -17,3 +17,4 @@ FEATURES_PROVIDED += periph_usbdev
 FEATURES_PROVIDED += arduino
 FEATURES_PROVIDED += arduino_pwm
 FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
diff --git a/boards/common/blxxxpill/Kconfig b/boards/common/blxxxpill/Kconfig
@@ -19,6 +19,7 @@ config BOARD_COMMON_BLXXXPILL
     select HAS_PERIPH_QDEC
     select HAS_PERIPH_USBDEV
     select HAS_RIOTBOOT
+    select HAS_TINYUSB_DEVICE
 
     # Clock configuration
     select BOARD_HAS_HSE

diff --git a/boards/common/blxxxpill/Makefile.features b/boards/common/blxxxpill/Makefile.features
@@ -15,3 +15,4 @@ FEATURES_PROVIDED += periph_usbdev
 
 # Put other features for this board (in alphabetical order)
 FEATURES_PROVIDED += riotboot
+FEATURES_PROVIDED += tinyusb_device
diff --git a/boards/common/particle-mesh/Kconfig b/boards/common/particle-mesh/Kconfig
@@ -15,6 +15,7 @@ config BOARD_COMMON_PARTICLE_MESH
     select HAS_PERIPH_UART_HW_FC
     select HAS_PERIPH_USBDEV
     select HAS_HIGHLEVEL_STDIO
+    select HAS_TINYUSB_DEVICE
     select HAS_VDD_LC_FILTER_REG1
 
     select HAVE_SAUL_GPIO

diff --git a/boards/common/particle-mesh/Makefile.features b/boards/common/particle-mesh/Makefile.features
@@ -11,5 +11,6 @@ FEATURES_PROVIDED += vdd_lc_filter_reg1
 
 # Various other features (if any)
 FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
 
 include $(RIOTBOARD)/common/nrf52/Makefile.features
diff --git a/boards/common/sodaq/Kconfig b/boards/common/sodaq/Kconfig
@@ -16,6 +16,7 @@ config BOARD_COMMON_SODAQ
     select HAS_PERIPH_USBDEV
     select HAS_ARDUINO
     select HAS_HIGHLEVEL_STDIO
+    select HAS_TINYUSB_DEVICE
 
     select HAVE_SAUL_GPIO
 

diff --git a/boards/common/sodaq/Makefile.features b/boards/common/sodaq/Makefile.features
@@ -13,3 +13,4 @@ FEATURES_PROVIDED += periph_usbdev
 # Various other features (if any)
 FEATURES_PROVIDED += arduino
 FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
diff --git a/boards/common/weact-f4x1cx/Kconfig b/boards/common/weact-f4x1cx/Kconfig
@@ -17,6 +17,7 @@ config BOARD_COMMON_WEACT_F4X1CX
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
     select HAS_HIGHLEVEL_STDIO
+    select HAS_TINYUSB_DEVICE
 
     # Clock configuration
     select BOARD_HAS_HSE

diff --git a/boards/common/weact-f4x1cx/Makefile.features b/boards/common/weact-f4x1cx/Makefile.features
@@ -12,6 +12,7 @@ FEATURES_PROVIDED += periph_usbdev
 
 # Various other features (if any)
 FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
 
 # This configuration enables modules that are only available when using Kconfig
 # module modelling

diff --git a/boards/feather-m0/Kconfig.feather-m0-base b/boards/feather-m0/Kconfig.feather-m0-base
@@ -19,6 +19,7 @@ config BOARD_FEATHER_M0_BASE
     select HAS_PERIPH_USBDEV
     select HAS_ARDUINO
     select HAS_HIGHLEVEL_STDIO
+    select HAS_TINYUSB_DEVICE
 
     select HAVE_SAUL_GPIO
 

diff --git a/boards/feather-m0/Makefile.features b/boards/feather-m0/Makefile.features
@@ -15,3 +15,4 @@ FEATURES_PROVIDED += periph_usbdev
 # Put other features for this board (in alphabetical order)
 FEATURES_PROVIDED += arduino
 FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
diff --git a/boards/feather-nrf52840/Kconfig b/boards/feather-nrf52840/Kconfig
@@ -17,6 +17,7 @@ config BOARD_FEATHER_NRF52840
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
     select HAS_HIGHLEVEL_STDIO
+    select HAS_TINYUSB_DEVICE
 
     select HAVE_SAUL_GPIO
 

diff --git a/boards/feather-nrf52840/Makefile.features b/boards/feather-nrf52840/Makefile.features
@@ -8,5 +8,6 @@ FEATURES_PROVIDED += periph_usbdev
 
 # Various other features (if any)
 FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
 
 include $(RIOTBOARD)/common/nrf52/Makefile.features
diff --git a/boards/nrf52840-mdk-dongle/Kconfig b/boards/nrf52840-mdk-dongle/Kconfig
@@ -16,6 +16,7 @@ config BOARD_NRF52840_MDK_DONGLE
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
     select HAS_HIGHLEVEL_STDIO
+    select HAS_TINYUSB_DEVICE
 
     select HAVE_SAUL_GPIO
     select HAVE_SAUL_PWM

diff --git a/boards/nrf52840-mdk-dongle/Makefile.features b/boards/nrf52840-mdk-dongle/Makefile.features
@@ -7,5 +7,6 @@ FEATURES_PROVIDED += periph_usbdev
 
 # Various other features (if any)
 FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
 
 include $(RIOTBOARD)/common/nrf52/Makefile.features
diff --git a/boards/nrf52840dongle/Kconfig b/boards/nrf52840dongle/Kconfig
@@ -18,6 +18,7 @@ config BOARD_NRF52840DONGLE
     select HAS_PERIPH_SPI
     select HAS_PERIPH_USBDEV
     select HAS_HIGHLEVEL_STDIO
+    select HAS_TINYUSB_DEVICE
     select HAS_VDD_LC_FILTER_REG0
     select HAS_VDD_LC_FILTER_REG1
 

diff --git a/boards/nrf52840dongle/Makefile.features b/boards/nrf52840dongle/Makefile.features
@@ -11,5 +11,6 @@ FEATURES_PROVIDED += vdd_lc_filter_reg1
 
 # Various other features (if any)
 FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
 
 include $(RIOTBOARD)/common/nrf52/Makefile.features
diff --git a/boards/seeeduino_xiao/Kconfig b/boards/seeeduino_xiao/Kconfig
@@ -20,6 +20,7 @@ config BOARD_SEEEDUINO_XIAO
     select HAS_PERIPH_TIMER
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
+    select HAS_TINYUSB_DEVICE
 
     select HAVE_SAUL_GPIO
 

diff --git a/boards/seeeduino_xiao/Makefile.features b/boards/seeeduino_xiao/Makefile.features
@@ -2,7 +2,6 @@ CPU = samd21
 CPU_MODEL = samd21g18a
 
 # Put defined MCU peripherals here (in alphabetical order)
-FEATURES_PROVIDED += highlevel_stdio
 FEATURES_PROVIDED += periph_adc
 FEATURES_PROVIDED += periph_i2c
 FEATURES_PROVIDED += periph_rtc
@@ -11,3 +10,7 @@ FEATURES_PROVIDED += periph_spi
 FEATURES_PROVIDED += periph_timer
 FEATURES_PROVIDED += periph_uart
 FEATURES_PROVIDED += periph_usbdev
+
+# Various other features (if any)
+FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
diff --git a/boards/sensebox_samd21/Kconfig b/boards/sensebox_samd21/Kconfig
@@ -20,6 +20,7 @@ config BOARD_SENSEBOX_SAMD21
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
     select HAS_HIGHLEVEL_STDIO
+    select HAS_TINYUSB_DEVICE
 
     select HAVE_SAUL_GPIO
 

diff --git a/boards/sensebox_samd21/Makefile.features b/boards/sensebox_samd21/Makefile.features
@@ -13,3 +13,4 @@ FEATURES_PROVIDED += periph_usbdev
 
 # Put other features for this board (in alphabetical order)
 FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
diff --git a/boards/serpente/Kconfig b/boards/serpente/Kconfig
@@ -21,6 +21,7 @@ config BOARD_SERPENTE
     select HAS_PERIPH_TIMER
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
+    select HAS_TINYUSB_DEVICE
 
     select HAVE_MTD_SPI_NOR
     select HAVE_SAUL_PWM

diff --git a/boards/serpente/Makefile.features b/boards/serpente/Makefile.features
@@ -2,7 +2,6 @@ CPU = samd21
 CPU_MODEL = samd21e18a
 
 # Put defined MCU peripherals here (in alphabetical order)
-FEATURES_PROVIDED += highlevel_stdio
 FEATURES_PROVIDED += periph_adc
 FEATURES_PROVIDED += periph_i2c
 FEATURES_PROVIDED += periph_pwm
@@ -12,3 +11,7 @@ FEATURES_PROVIDED += periph_spi
 FEATURES_PROVIDED += periph_timer
 FEATURES_PROVIDED += periph_uart
 FEATURES_PROVIDED += periph_usbdev
+
+# Various other features (if any)
+FEATURES_PROVIDED += highlevel_stdio
+FEATURES_PROVIDED += tinyusb_device
diff --git a/boards/yarm/Kconfig b/boards/yarm/Kconfig
@@ -21,3 +21,4 @@ config BOARD_YARM
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
     select HAS_RIOTBOOT
+    select HAS_TINYUSB_DEVICE
diff --git a/boards/yarm/Makefile.features b/boards/yarm/Makefile.features
@@ -2,7 +2,6 @@ CPU = saml21
 CPU_MODEL = saml21j18b
 
 # Put defined MCU peripherals here (in alphabetical order)
-FEATURES_PROVIDED += highlevel_stdio
 FEATURES_PROVIDED += periph_adc
 FEATURES_PROVIDED += periph_i2c
 FEATURES_PROVIDED += periph_rtc
@@ -13,4 +12,6 @@ FEATURES_PROVIDED += periph_uart
 FEATURES_PROVIDED += periph_usbdev
 
 # Put other features for this board (in alphabetical order)
+FEATURES_PROVIDED += highlevel_stdio
 FEATURES_PROVIDED += riotboot
+FEATURES_PROVIDED += tinyusb_device