drm/amd/display: Add margin on DRR vblank start for subvp

[Description]
- Add margin for HUBP "jitter" for SubVp + DRR case
- Also do a min transition even if MPO is added on a
  non SubVP pipe (i.e. added on DRR pipe for SubVP + DRR)

Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>

drivers/gpu/drm/amd/display/dc/core/dc.c

@@ -3768,6 +3768,8 @@ static bool could_mpcc_tree_change_for_active_pipes(struct dc *dc,
 
 	struct dc_stream_status *cur_stream_status = stream_get_status(dc->current_state, stream);
 	bool force_minimal_pipe_splitting = false;
+	bool subvp_active = false;
+	uint32_t i;
 
 	*is_plane_addition = false;
 
@@ -3799,11 +3801,25 @@ static bool could_mpcc_tree_change_for_active_pipes(struct dc *dc,
 		}
 	}
 
+	for (i = 0; i < dc->res_pool->pipe_count; i++) {
+		struct pipe_ctx *pipe = &dc->current_state->res_ctx.pipe_ctx[i];
+
+		if (pipe->stream && pipe->stream->mall_stream_config.type != SUBVP_NONE) {
+			subvp_active = true;
+			break;
+		}
+	}
+
 	/* For SubVP when adding or removing planes we need to add a minimal transition
 	 * (even when disabling all planes). Whenever disabling a phantom pipe, we
 	 * must use the minimal transition path to disable the pipe correctly.
+	 *
+	 * We want to use the minimal transition whenever subvp is active, not only if
+	 * a plane is being added / removed from a subvp stream (MPO plane can be added
+	 * to a DRR pipe of SubVP + DRR config, in which case we still want to run through
+	 * a min transition to disable subvp.
 	 */
-	if (cur_stream_status && stream->mall_stream_config.type == SUBVP_MAIN) {
+	if (cur_stream_status && subvp_active) {
 		/* determine if minimal transition is required due to SubVP*/
 		if (cur_stream_status->plane_count > surface_count) {
 			force_minimal_pipe_splitting = true;

drivers/gpu/drm/amd/display/dc/dc.h

@@ -266,6 +266,7 @@ struct dc_caps {
 	uint8_t subvp_swath_height_margin_lines; // subvp start line must be aligned to 2 x swath height
 	uint16_t subvp_pstate_allow_width_us;
 	uint16_t subvp_vertical_int_margin_us;
+	uint8_t subvp_drr_vblank_start_margin_us;
 	bool seamless_odm;
 };
 

drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c

@@ -493,6 +493,7 @@ static void populate_subvp_cmd_drr_info(struct dc *dc,
 
 	pipe_data->pipe_config.vblank_data.drr_info.min_vtotal_supported = min_vtotal_supported;
 	pipe_data->pipe_config.vblank_data.drr_info.max_vtotal_supported = max_vtotal_supported;
+	pipe_data->pipe_config.vblank_data.drr_info.drr_vblank_start_margin = dc->caps.subvp_drr_vblank_start_margin_us;
 }
 
 /**

drivers/gpu/drm/amd/display/dc/dc_stream.h

@@ -144,7 +144,7 @@ struct test_pattern {
 	unsigned int cust_pattern_size;
 };
 
-#define SUBVP_DRR_MARGIN_US 500 // 500us for DRR margin (SubVP + DRR)
+#define SUBVP_DRR_MARGIN_US 600 // 600us for DRR margin (SubVP + DRR)
 
 enum mall_stream_type {
 	SUBVP_NONE, // subvp not in use

drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c

@@ -2171,6 +2171,7 @@ static bool dcn32_resource_construct(
 	dc->caps.subvp_swath_height_margin_lines = 16;
 	dc->caps.subvp_pstate_allow_width_us = 20;
 	dc->caps.subvp_vertical_int_margin_us = 30;
+	dc->caps.subvp_drr_vblank_start_margin_us = 100; // 100us margin
 
 	dc->caps.max_slave_planes = 2;
 	dc->caps.max_slave_yuv_planes = 2;

drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c

@@ -1720,6 +1720,7 @@ static bool dcn321_resource_construct(
 	dc->caps.subvp_swath_height_margin_lines = 16;
 	dc->caps.subvp_pstate_allow_width_us = 20;
 	dc->caps.subvp_vertical_int_margin_us = 30;
+	dc->caps.subvp_drr_vblank_start_margin_us = 100; // 100us margin
 	dc->caps.max_slave_planes = 1;
 	dc->caps.max_slave_yuv_planes = 1;
 	dc->caps.max_slave_rgb_planes = 1;

drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h

@@ -1029,13 +1029,14 @@ struct dmub_cmd_fw_assisted_mclk_switch_pipe_data_v2 {
 			uint16_t vtotal;
 			uint16_t htotal;
 			uint8_t vblank_pipe_index;
-			uint8_t padding[2];
+			uint8_t padding[1];
 			struct {
 				uint8_t drr_in_use;
 				uint8_t drr_window_size_ms;	// Indicates largest VMIN/VMAX adjustment per frame
 				uint16_t min_vtotal_supported;	// Min VTOTAL that supports switching in VBLANK
 				uint16_t max_vtotal_supported;	// Max VTOTAL that can support SubVP static scheduling
 				uint8_t use_ramping;		// Use ramping or not
+				uint8_t drr_vblank_start_margin;
 			} drr_info;				// DRR considered as part of SubVP + VBLANK case
 		} vblank_data;
 	} pipe_config;