201807 #15
Merged
201807 #15
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…onic-net#2002) * [platform] accton as5712-54x, fixed 1. Check i2c buses, they may get fliped on every bootup. 2. QSFP's lp_mode and reset are out of port order. 3. Change QSFP is reset with 1 second period. Signed-off-by: roy_lee <roy_lee@accton.com> * [platform] accton as5712-54x. Fix util.py error about SFP/QSFP's tx_disable and present. Signed-off-by: roy_lee <roy_lee@accton.com>
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
…-net#1932) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
sonic-net#1839) * [mlnx-sfpplugin] enhancement to support tranceiver sensor monitoring * Modify the eeprom folder to make it accessably from pmon container * implement the get_transceiver_change_event API file change list modified: device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfputil.py modified: device/mellanox/x86_64-mlnx_msn2100-r0/plugins/sfputil.py modified: device/mellanox/x86_64-mlnx_msn2410-r0/plugins/sfputil.py modified: device/mellanox/x86_64-mlnx_msn2700-r0/plugins/sfputil.py modified: device/mellanox/x86_64-mlnx_msn2740-r0/plugins/sfputil.py signed-off-by Liu Kebo kebol@mellanox.com * remove commented code * revise the get_transceiver_change_event implementation and remove unused function * remove blank
…ew xcvrd deamon (sonic-net#1840) * [docker-platform-monitor] make file and supervisord conf change for new xcvrd deamon * make file change for the new daemon * supervisord conf change for the new daemon signed-off-by Liu Kebo kebol@mellanox.com * make xcvrd start sequence aligned with the supervisord conf * update submodules to include xcvrd modification
…sonic-net#1937) * mlnx enhancement for xcvrd implementation * fix conflict
Incorporate a fix for the fan driver on 7050QX-32S
Signed-off-by: Mykola Faryma <mykolaf@mellanox.com>
…et#2123) With this update the SFPs will set txdisable to 0 when out of reset. Allowing optical cables to be used on these ports.
Flashes used for the 7050QX-32 and 7050QX-32S have a fw issue. The best option to solve the problem is to upgrade to a newer firmware. However this can only be done while in memory and take 10 seconds. Adding an upgrade mechanism is possible but would need more consideration as flashing the firmware and reformating the flash will exceed the fast-reboot requirements. A quick mitigation is to align the ext4 partition that we create on these vfat based system on a 4k boundary. Here we chose 1M instead but it's the same. Newer version of sfdisk do this automatically but the one in SONiC today doesn't have this behavior. This workaround will only reduce the pace of the flash health degradation. The only long term fix is to flash the firmware.
- Force fans to 100% upon loading the kernel driver for safety
Signed-off-by: Kevin Wang <kevinw@mellanox.com>
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
-nc will not download if already here and return error -N will compare the timestamp and not download the file. Signed-off-by: Guohan Lu <gulv@microsoft.com>
Signed-off-by: Kevin Wang <kevinw@mellanox.com>
* update device driver and support qos and fix some driver bug * modified device file for support qos and fix some device init error
* Add Porsche project * Upgrade kernel to 3.16.57-2
Alex-Dai
pushed a commit
that referenced
this pull request
Feb 15, 2019
* fe60afa 2019-02-12 | [lldpsyncd] remove dbsyncd logic which is moved to lldpmgr (#15) (HEAD, origin/master, origin/HEAD) [Mykola F] Signed-off-by: Guohan Lu <gulv@microsoft.com>
bbinxie
pushed a commit
that referenced
this pull request
May 23, 2019
* fe60afa 2019-02-12 | [lldpsyncd] remove dbsyncd logic which is moved to lldpmgr (#15) (HEAD, origin/master, origin/HEAD) [Mykola F] Signed-off-by: Guohan Lu <gulv@microsoft.com>
mudsut4ke
pushed a commit
that referenced
this pull request
Jan 25, 2021
…sonic-net#4702) Update AS7312-54X,AS7312-54XS,AS7315-27XB config.bcm file to make sure there is no the following error message. configuration: format error in /usr/share/sonic/hwsku/th-as7312-48x25G+6x100G.config.bcm on line 110 (ignored)#15
mudsut4ke
pushed a commit
that referenced
this pull request
Jan 25, 2021
This update brings in the following commits. 86c1108 Enable arm architecture to build in addition to amd64 (#37) 4acb2c3 fix bugs and enhance Transformer (#35) 49e5a22 ygot related enhancements and fixes (#34) 51224de Fix ietf yang search path for cvl schema builds (#32) 3c6cdb3 CVL Changes #8: 'must' and 'when' expression evaluation (#31) dabf231 CVL Changes #7: 'leafref' evaluation (#28) 6f9535f CVL Changes #6: Customized Xpath Engine integration (#27) 5e2466b DB-Layer fixes/enhancements (#26) 9a27302 CVL Changes #4: Implementation of new CVL APIs (#22) dbf1093 Translib support for authorization, yang versioning and Delete flag (#21) 80f369e CVL Changes #5: YParser enhancement (#23) 904ce18 CVL Changes #3: Multi-db instance support (#20) 9d24a34 CVL Changes #2: YValidator infra changes for evaluating xpath expression (#19) f3fc40f CVL Changes #1: Initial CVL code reorganization and common infra changes (#18) 4922601 Bulk and RPC API support in translib (#16) 1d730df RFC7895 yang module library implementation (#15)
mudsut4ke
pushed a commit
that referenced
this pull request
Mar 16, 2021
…tool: not found (sonic-net#6615) Starting with BRCM SAI 4.3.1.5 we see the following :ethtool not fount" error in syslog during boot up: ``` Jan 27 07:36:14.712472 str-s6100-acs-1 INFO syncd#/supervisord: syncd sh: 1: Jan 27 07:36:14.712844 str-s6100-acs-1 INFO syncd#/supervisord: syncd ethtool: not found Jan 27 07:36:14.713228 str-s6100-acs-1 INFO syncd#/supervisord: syncd #15 Jan 27 07:36:14.713840 str-s6100-acs-1 INFO syncd#syncd: [0] SAI_API_HOSTIF:_brcm_sai_hostif_speed_set:11894 cmd ethtool -s Ethernet39 speed 40000 rc:32512 Jan 27 07:36:14.717204 str-s6100-acs-1 NOTICE swss#orchagent: :- setHostIntfsOperStatus: Set operation status DOWN to host interface Ethernet39 Jan 27 07:36:14.717204 str-s6100-acs-1 NOTICE swss#orchagent: :- initPort: Initialized port Ethernet39 Jan 27 07:36:14.717204 str-s6100-acs-1 NOTICE swss#orchagent: :- initializePort: Initializing port alias:Ethernet36 pid:1000000000040 Jan 27 07:36:14.726793 str-s6100-acs-1 NOTICE swss#portsyncd: :- onMsg: nlmsg type:16 key:Ethernet36 admin:0 oper:0 addr:4c:76:25:f5:48:80 ifindex:75 master:0 Jan 27 07:36:14.727967 str-s6100-acs-1 NOTICE swss#portsyncd: :- onMsg: Publish Ethernet36(ok) to state db Jan 27 07:36:14.729331 str-s6100-acs-1 NOTICE swss#orchagent: :- addHostIntfs: Create host interface for port Ethernet36 Jan 27 07:36:14.752398 str-s6100-acs-1 INFO syncd#/supervisord: syncd sh: 1: ethtool: not found#015 Jan 27 07:36:14.752689 str-s6100-acs-1 INFO syncd#syncd: [0] SAI_API_HOSTIF:_brcm_sai_hostif_speed_set:11894 cmd ethtool -s Ethernet36 speed 40000 rc:32512 Jan 27 07:36:14.756050 str-s6100-acs-1 NOTICE swss#orchagent: :- setHostIntfsOperStatus: Set operation status DOWN to host interface Ethernet36 Jan 27 07:36:14.757585 str-s6100-acs-1 NOTICE swss#orchagent: :- initPort: Initialized port Ethernet36 ``` It seems that starting with BRCM SAI 4.2.1.5 syncd is using ethtool to set the host interface speed and since this ethtool was not part of the syncd Docker, we observe these "ethtool not found" issue.
jerseyang
pushed a commit
that referenced
this pull request
Jun 4, 2021
…tool: not found (sonic-net#6615) Starting with BRCM SAI 4.3.1.5 we see the following :ethtool not fount" error in syslog during boot up: ``` Jan 27 07:36:14.712472 str-s6100-acs-1 INFO syncd#/supervisord: syncd sh: 1: Jan 27 07:36:14.712844 str-s6100-acs-1 INFO syncd#/supervisord: syncd ethtool: not found Jan 27 07:36:14.713228 str-s6100-acs-1 INFO syncd#/supervisord: syncd #15 Jan 27 07:36:14.713840 str-s6100-acs-1 INFO syncd#syncd: [0] SAI_API_HOSTIF:_brcm_sai_hostif_speed_set:11894 cmd ethtool -s Ethernet39 speed 40000 rc:32512 Jan 27 07:36:14.717204 str-s6100-acs-1 NOTICE swss#orchagent: :- setHostIntfsOperStatus: Set operation status DOWN to host interface Ethernet39 Jan 27 07:36:14.717204 str-s6100-acs-1 NOTICE swss#orchagent: :- initPort: Initialized port Ethernet39 Jan 27 07:36:14.717204 str-s6100-acs-1 NOTICE swss#orchagent: :- initializePort: Initializing port alias:Ethernet36 pid:1000000000040 Jan 27 07:36:14.726793 str-s6100-acs-1 NOTICE swss#portsyncd: :- onMsg: nlmsg type:16 key:Ethernet36 admin:0 oper:0 addr:4c:76:25:f5:48:80 ifindex:75 master:0 Jan 27 07:36:14.727967 str-s6100-acs-1 NOTICE swss#portsyncd: :- onMsg: Publish Ethernet36(ok) to state db Jan 27 07:36:14.729331 str-s6100-acs-1 NOTICE swss#orchagent: :- addHostIntfs: Create host interface for port Ethernet36 Jan 27 07:36:14.752398 str-s6100-acs-1 INFO syncd#/supervisord: syncd sh: 1: ethtool: not found#015 Jan 27 07:36:14.752689 str-s6100-acs-1 INFO syncd#syncd: [0] SAI_API_HOSTIF:_brcm_sai_hostif_speed_set:11894 cmd ethtool -s Ethernet36 speed 40000 rc:32512 Jan 27 07:36:14.756050 str-s6100-acs-1 NOTICE swss#orchagent: :- setHostIntfsOperStatus: Set operation status DOWN to host interface Ethernet36 Jan 27 07:36:14.757585 str-s6100-acs-1 NOTICE swss#orchagent: :- initPort: Initialized port Ethernet36 ``` It seems that starting with BRCM SAI 4.2.1.5 syncd is using ethtool to set the host interface speed and since this ethtool was not part of the syncd Docker, we observe these "ethtool not found" issue.
mudsut4ke
pushed a commit
that referenced
this pull request
Jan 28, 2022
* [BFN] Updated platform APIs impl Signed-off-by: Andriy Kokhan <andriyx.kokhan@intel.com> * Extended BFN platform SFP APIs implementation * Update sfp.py * [BFN] Extended SFP platform plugin implementation Signed-off-by: Andriy Kokhan <andriyx.kokhan@intel.com> * [BFN] Extended Fans platform plugin implementation * [BFN] divided classes Fan and FanDrawer into 2 files * Signed-off-by: Vadym Yashchenko <vadymx.yashchenko@intel.com> What I did Add get_model() function Add get_low_critical_threshold() function Change __get(...) function. How I did it Differnece from previous implementation of __get(...) function is return real value or -9999.9 if value is not provided by thrift API * Add get_presence() function and revised __get() function Signed-off-by: Vadym Yashchenko <vadymx.yashchenko@intel.com> * [BFN] Updated PSU platform APIs impl Signed-off-by: Dmytro Lytvynenko <dmytrox.lytvynenko@intel.com> * Added BFN PSU cache (#9) Signed-off-by: Andriy Kokhan <andriyx.kokhan@intel.com> * [BFN] Fans and Fantray platform APIs update (#7) * [BFN] Updated SFP platform APIs (#10) Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com> * [BFN] Updated platform API for thermal (#8) * Signed-off-by: Vadym Yashchenko <vadymx.yashchenko@intel.com> * Revert "[BFN] Fans and Fantray platform APIs update (#7)" (#11) This reverts commit c62a733. * Add support health monitor system (#15) Signed-off-by: Petro Bratash <petrox.bratash@intel.com> * Update chassis.py * [BFN] Updated FANs and FAN Tray platform API (#14) * Fix fix_alignment (#17) Signed-off-by: Petro Bratash <petrox.bratash@intel.com> * [BFN] Improvement show environment (#16) * Added PSU temperature skip into platform.json (#18) Signed-off-by: Andriy Kokhan <andriyx.kokhan@intel.com> * Do not skip psud on Newport Signed-off-by: Andriy Kokhan <andriyx.kokhan@intel.com> * [BFN] fix fan status from Not OK to Ok (#19) * [BFN] Updated SFP platform plugin (#13) Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com> * [DPB] Fix typo for Ethernet0 2x200G[100G,40G] breakout mode (#21) Signed-off-by: Mykola Gerasymenko <mykolax.gerasymenko@intel.com> * [barefoot] Tmp fix vendor_rev (#22) Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com> * Fixed python issues in sonic_platform/fan_drawer.py Signed-off-by: Andriy Kokhan <andriyx.kokhan@intel.com> * Updated fan_drawer.py * Fixing trailing white spaces in fan_drawer.py * [BFN] Fix thrift for SFPs API Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com> * In platform.json, replaced 'false' with '0' to workaround ast.literal_eval() issue Signed-off-by: Andriy Kokhan <andriyx.kokhan@intel.com> * [Newport] Thermal manager (#23) * Signed-off-by: Vadym Yashchenko <vadymx.yashchenko@intel.com> * Revert "In platform.json, replaced 'false' with '0' to workaround ast.literal_eval() issue" This reverts commit 1e73127. * Removed 'controllable' options from platform.json to fix factory default config generation Signed-off-by: Andriy Kokhan <andriyx.kokhan@intel.com> * Update thermal_manager.py * Migrated SFP plugin to sonic_xcvr API (#30) Signed-off-by: Andriy Kokhan <andriyx.kokhan@intel.com> Co-authored-by: KostiantynYarovyiBf <kostiantynx.yarovyi@intel.com> Co-authored-by: Vadym Yashchenko <vadymx.yashchenko@intel.com> Co-authored-by: Dmytro Lytvynenko <dmytrox.lytvynenko@intel.com> Co-authored-by: Volodymyr Boiko <volodymyrx.boiko@intel.com> Co-authored-by: Petro Bratash <petrox.bratash@intel.com> Co-authored-by: Mykola Gerasymenko <mykolax.gerasymenko@intel.com>
mudsut4ke
pushed a commit
that referenced
this pull request
Jan 28, 2022
[sonic-linkmgrd][master] submodule update Commits added: 0c23756 Jing Zhang 2022-01-19 Linkmgrd subscribing State DB route event (#13) 12b9951 Longxiang Lyu 2021-12-13 Add TLV support to ICMP payload (#11) 3eedda3 Longxiang Lyu 2022-01-06 Add missing intermediate states (#16) 8da4982 Ying Xie 2022-01-04 [linkmgrd] update README, set coding style guidance (#15) a897cf8 Longxiang Lyu 2021-12-13 Improve PR template (#16) 6fec701 Jing Zhang 2021-12-06 Add pull request template for linkmgrd repo (#9) signed-off-by: Jing Zhang zhangjing@microsoft.com
pphuchar
pushed a commit
that referenced
this pull request
Apr 18, 2022
[sonic-linkmgrd][master] submodule update Commits added: 0c23756 Jing Zhang 2022-01-19 Linkmgrd subscribing State DB route event (#13) 12b9951 Longxiang Lyu 2021-12-13 Add TLV support to ICMP payload (#11) 3eedda3 Longxiang Lyu 2022-01-06 Add missing intermediate states (#16) 8da4982 Ying Xie 2022-01-04 [linkmgrd] update README, set coding style guidance (#15) a897cf8 Longxiang Lyu 2021-12-13 Improve PR template (#16) 6fec701 Jing Zhang 2021-12-06 Add pull request template for linkmgrd repo (#9) signed-off-by: Jing Zhang zhangjing@microsoft.com
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
- What I did
- How I did it
- How to verify it
- Description for the changelog
- A picture of a cute animal (not mandatory but encouraged)