Merge branch 'main' of https://github.com/SequoiaSan/FlipperZero-WiFi…

…-Scanner_Module

README.md

@@ -1,5 +1,7 @@
 # (WIP)
 
+### Supports FlipperZero's Dev Board v.1
+
 # FlipperZero WiFi Scanner Module
  WiFi Scanner Module for FlipperZero based on ESP8266/ESP32 (results with ESP8266 much better than with ESP32)
 
@@ -42,11 +44,32 @@
 
 # How to
 
-Flash [firmware](https://github.com/SequoiaSan/FlipperZero-WiFi-Scanner_Module-ESP8266/tree/main/FlipperZero-WiFi-Scanner_Module) on Wemos D1 Mini
+## FlipperZero's Dev Board v.1
+Flash firmware for Dev Board and firmware for FlipperZero from [latest release](https://github.com/SequoiaSan/FlipperZero-WiFi-Scanner_Module/releases) 
+
+[How To Flash .bin to ESP](https://github.com/SequoiaSan/Guide-How-To-Upload-bin-to-ESP8266-ESP32)
+
+[How To Update FlipperZero firmware](https://www.youtube.com/watch?v=PUn7XJrslQ4) (choose **Install from file**)
+
+
+## DIY Module
+Precompiled .bin for ESP and firmware for FlipperZero can be found in [latest release](https://github.com/SequoiaSan/FlipperZero-WiFi-Scanner_Module/releases)
+
+[How To Flash .bin to ESP](https://github.com/SequoiaSan/Guide-How-To-Upload-bin-to-ESP8266-ESP32)
+
+[How To Update FlipperZero firmware](https://www.youtube.com/watch?v=PUn7XJrslQ4) (choose **Install from file**)
+
+
+### Or compile firmwares on your own
+
+Compile and flash [firmware](https://github.com/SequoiaSan/FlipperZero-WiFi-Scanner_Module-ESP8266/tree/main/FlipperZero-WiFi-Scanner_Module) on Wemos D1 Mini
+
 Install EPS8266 board version 2.7.4 for Arduino IDE. I had issues with higher versions.
 
 Compile firmware for FlipperZero with new [application](https://github.com/SequoiaSan/FlipperZero-WiFi-Scanner_Module-ESP8266/tree/main/applications/wifi_scanner)
 
+If you want compile for Dev Board then enable **FLIPPERZERO_DEV_BOARD_V_1** in code. Same goes to **ENABLE_MODULE_POWER**, **ENABLE_MODULE_DETECTION**
+
 Use next schematics to solder the WiFi Scanner board for FlipperZero
 
 ![image](https://github.com/SequoiaSan/FlipperZero-WiFi-Scanner_Module-ESP8266/blob/main/rep_images/Schematics_1.jpg?raw=true)
@@ -67,7 +90,7 @@ FIRMWARE_APPS = {
         "archive",
 
         <b># My Apps</b>
-        <b>my_apps",</b>
+        <b>"my_apps",</b>
 
         # Settings
         "passport",