MINI FW based on 6.0.1. Appendix has to be removed if you have original el. board.
HW versions
- (original) MINI
- coreXY
- long bed
- i3 MK3.3
Improvements
- Skew compensation: Turns on skew compensation in Marlin and allows it to be configured with
M852. - Max Temps: Raises the maximum bed temperature from 100C to 110C
and nozzle temperature from 275C to 285C (use with caution!). - Settings during print: You can change Snake settings during printing.
- Faster nozzle cooling: If you wait for nozzle cooling before MBL, you can call
M109 R170 C
which uses print fan to speed up cooling. - Game: Instead of printing you can enjoy simple game.
- Selftest check: Now you can select
Ignoreto immediately pass all selftests. - Change filament: Change of filament in Tune menu is moved to submenu to avoid unwanted interruption.
- Adjust brightness: You can change brightness of the display. It does not dim the light but draws darker colors.
- Cold mode (min.temp.): If you enable Cold Mode, temperatures (once set) won't drop below 30°C. For safety reasons cold mode must be enabled after every start of the printer.
- Speed up (un)parking: Parking and unparking is done at the highest speed to shorten maintenance (change filament) time during printing.
- Different printers: Next to a standard version, other version are released:
- coreXY
- long bed - bed length of 250 mm (long bed HW)
- i3 MK3.3 (i3 MK3 with MINI board, MINI display, Z motor split, and mosfet on heating)
- Different languages
- Avoid display flashing: Some displays flash with original FW.