tools/imx8m_image.sh: remove bashism #4

baruchsiach · 2018-12-31T09:54:39Z

Use a single '=' to test string equality for compatibility with non-bash
shells. Otherwise, if /bin/sh is dash, build fails:

./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator
./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator
./tools/imx8m_image.sh: 15: [: spl/u-boot-spl-ddr.bin: unexpected operator
./tools/imx8m_image.sh: 15: [: spl/u-boot-spl-ddr.bin: unexpected operator
WARNING './spl/u-boot-spl-ddr.bin' not found, resulting binary is not-functional

Signed-off-by: Baruch Siach baruch@tkos.co.il

imx8mq usb xhci is a dwc3 based controller, its synopsys PHY can be controlled by usbmix glue layer. imx8mq has 2 USB3 instance, this patch only enables USB2(2nd instance). Reviewed-by : Peng Fan <peng.fan@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com>

ATF will power off all PUs at default, so for USB, we enable its PU power for both host and device modes in board_usb_init and disable the power when usb is stop in board_usb_cleanup. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Li Jun <jun.li@nxp.com>

Fix build warnings below, because the imx8m_usb_power is not declared board/freescale/imx8mq_evk/imx8m_evk.c: In function ‘board_usb_init’: board/freescale/imx8mq_evk/imx8m_evk.c:205:2: warning: implicit declaration of function ‘imx8m_usb_power’ [-Wimplicit-function-declaration] imx8m_usb_power(index, true); ^~~~~~~~~~~~~~~ drivers/usb/host/xhci-imx8m.c: In function ‘xhci_hcd_init’: drivers/usb/host/xhci-imx8m.c:123:3: warning: implicit declaration of function ‘imx8m_usb_power’ [-Wimplicit-function-declaration] imx8m_usb_power(ctr_data[index].usb_id, false); ^~~~~~~~~~~~~~~ Signed-off-by: Ye Li <ye.li@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com>

i.MX8MQ has two USB3 controllers. Previously we only added the u-boot#2 controller support in driver. This patch adds the address for u-boot#1 controller. Signed-off-by: Ye Li <ye.li@nxp.com> Acked-by: Jun Li <jun.li@nxp.com> (cherry picked from commit 3172dab)

There are some integer to pointer convert. To support 64 bits system, change the unsigned int to unsigned long. Signed-off-by: Ye Li <ye.li@nxp.com>

Adding basic HDMI support for i.MX8 for splash screen. Signed-off-by: Oliver Brown <oliver.brown@nxp.com>

This adds a command to load the HDP firmware and supporting libraries. Signed-off-by: Oliver Brown <oliver.brown@nxp.com>

…t selected Met build errors below when CONFIG_VIDEO_IMX_HDP_LOAD is not selected. Because the u-boot make script checks the "$(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)" for built-in target. aarch64-poky-linux-ld.bfd: cannot find drivers/video/imx/built-in.o: No such file or directory scripts/Makefile.build:359: recipe for target 'drivers/video/built-in.o' failed Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>

Renaming hdpload to hdp_load for consistancy. Correcting the strncmp to use only 4 characters to match "load" argument Signed-off-by: Oliver Brown <oliver.brown@nxp.com>

Adding HDMI support for splash screen. Signed-off-by: Oliver Brown <oliver.brown@nxp.com>

Adding header file for i.MX8 HDMI support Signed-off-by: Oliver Brown <oliver.brown@nxp.com>

Checks whether the HDMI FW is running before initialize the HDMI display. So that for cases like mfgtool and imx-boot image without HDMI FW, the u-boot won't be blocked. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 273b45d)