Skip to content

Home

Jump to bottom
Strum edited this page Oct 28, 2019 · 21 revisions

Mental Modules

Welcome to the Strum's Mental VCV Modules wiki

These modules are mostly utilities and I have tried to make them as small as possible to take up less space in the rack. I've tried to maintain a consistent look across the modules and will eventually reskin them to make them look better.

Generally inputs are on the left and outputs on the right.

I/O sockets are colour coded.

  • Audio inputs - purple

Audio Input Socket

  • Audio outputs - red

Audio Output Socket

  • CV inputs - dark green

CV Input Socket

  • CV outputs - light green

CV Output Socket

  • Gate/Trigger - inputs orange

Gate/Trigger Input Socket

  • Gate/Trigger - outputs yellow

Gate/Trigger Output Socket

Module List

  • Chord - Inspired by Q-Bit chord Eurorack module, takes input pitch and builds a chord from it based on various parameters and logic inputs.

  • Gates - Manual or remotely controllable gates

  • Logic - Various logic gates

  • Mults - Simple 2*5 Multiples

  • Muxes - 2 * 2 into 1 muxes and 1 4 into 1 mux

  • Quantiser - Takes inputs pitchs and quantises to scale selected by buttons for each pitch. Also functions as a pitch reference

  • SubMixer - 4 Channel stereo mixer with pan based on fundamental VCMixer

  • A/B Switches - A/B switches

  • Buttons - Buttons for controlling other modules manually 7 On/off switches in the top section and 7 momentary buttons in the lower.

  • Mixer - 12 Channel Mixer with 2 auxiliary sends and returns and channel mutes.

  • Clipper - Simple Clipping distortion

  • Wave Folder - Simple Waver folder

  • Pitch Shifter - Shift pitches by octaves or semitones

  • Sums - 2 * 5 into 1 summing mixers, useful for adding cvs for pitch and modulation

  • Clock Divider - clock divider with binary divisions and extra divisions 3,5,7 and 12

  • Cartesian Sequencer - Cartesian sequencer similar to make noise rene.

  • Patch Matrix - 10 by 10 Patch matrix

  • Binary decoder - 3 bit binary decoder true at one of 8 outputs dependent on logic state of the 3 inputs

  • 8 way switch - based on binary decoder, switches a signal to one of 8 outputs based on 3 bit selector inputs

  • 8 to 1 Mux - The reverse of the 8 way switch, 8 inputs 1 out selected with 3 logic inputs

  • Counters - for euclidean rhythms

  • Knobs - Outputs constants continuous or stepped by integer or semitone, uni or bipolar

  • Gate Maker - Counter with delay before opening and after closing, cycle or one shot mode

  • Master Clock - Clock with BPM Tempo and time signature

  • Quad LFO - 4 LFO's in a compact panel with synced modes similar to Batumi

Clone this wiki locally