Home

Identifying the type of Tuya Wi-Fi Module

Tuya Data Sheets - original dead link https://docs.tuya.com/en/hardware/WiFi-module/wifi-e1s-module.html

Known Working Configurations

Device	Reported By
SP-201 Orange Tech 2 in 1 Smart Energy Monitoring Socket Wifi Mini Outlet Use new feature 'template' in Sonoff-Tasmota-6.4.1.16 - Using device web GUI, on console enter otaurl http://thehackbox.org/tasmota/sonoff.bin upgrade 1 after restart enter template {"NAME":"SP201","GPIO":[56,0,0,131,17,134,0,0,21,18,132,22,0],"FLAG":0,"BASE":18} from configuration-module select SP201(0) - Done!	balvant813
Hyleton-311 / XP61065 - set as Hilton-313 in tasmota	AndyRph
Teckin SP23 - set as BlitzWolf SHP2 config in Tasmota	Aterfax
Teckin SP22 v1.4 - set as Module (Teckin (52) in Tasmota config after update	Servidge
Teckin SP10 Configuration	axiom00
OUKITEL X6P - same configuration as Tecking SP10	amitubale
Gosund WP3 US Round Socket - identical to TanTan WP3 - Script worked on 1 of 2 - Script worked on all four of mine. I just had to repeat executing the script over and over until it succeeded. This may now be corrected. Template	dhami220 meingraham
TanTan WP3 US Round Socket Plugs come with a variety of FlashChipIds, and may be wired differently. The following configuration is listed by FlashChipId. Blue LED indicates off, red indicates on. - 144051: GPIO4=Button1, GPIO12=Led1i, GPIO13=Led2, GPIO14=Relay1 - 1440a1: GPIO0=Led2i, GPIO2=Led1, GPIO13=Button1, GPIO15=Relay1	byxorna
TanTan US Double Outlet - LEDs aren't quite right (everything else works as expected) - see here for sonoff_template.h 1440a1: GPIO0=Led1i GPIO2=Led2i GPIO4=Relay1 GPIO13=Button1 GPIO15=Relay2 GPIO16=Button2	loph917
iClever IC-BS06 "Smart Outdoor Outlet" - GPIO4 blue LEDi, 5 green, 12 relay1, 14 relay2, 13 button	sylvandb
ZooZee Outlet - set as Teckin US in tasmota	loph917
ZooZee Smart Plug (round) - set as Teckin US (no reporting)	bkpsu
Teckin Outlet - set as Teckin US in tasmota	loph917
CE Wifi Plug - Costco	Zebble
CE Dimmer - Costco	Zebble
Feit WiFi Bulb - Costco Fully supported by tasmota Template - Requires full build	kiram9
Esicoo Round Plug - GPIO1 - Switch1, GPIO13 - Led1i, GPIO14 - Relay1	digiblur
eMylo Smart Switch	damondins
Merkury Wifi Bulb - Walmart - Not fully supported by Tasmota yet. - Must Set module to Magic Home (34). White and Dim Only No RGB	damondins
ZEOOTA Wifi Smart Power Strip 4 EU outlets with 4 USB ports (TYWE2S) Module Configuration	DAVIZINH0
Lonsonho Smart Plug	Flipsoo
Avatar Control AWP07L - after Update LED & Button not working, webfrontend OK, - OTA Update to 6.1.4 OK, set as Module Generic in Tasmota config, D3=57, D4=56, D7=17, D8=21, other=00 - Button & LED OK, at the moment no power meter or as Tasmota profile #45 (Blitzwolf SHP) with power meter	Servidge
Amysen YX-WS01 smart plug - Flashed following the script, set Module Type Generic - GPIO1 = Button1, GPIO12 = Led2i, GPIO13 = Led1i, GPIO14 = Relay1	prndlrm

Failures

Device	Reported By	Tuya FW Version	ESP Module
Bestek MRJ1011 (brick)	thecrazymonkey
SM-PW702 Single Outlet (brick)	eWill2	1.0.6	tywe3s
AWP04L Single Outlet(brick)	eWill2	1.0.5	ESP8266-S3
XS-SSA06 RGB "Round Mini Socket" (brick)	sylvandb	wifi/mcu 1.0.2
TikLok RGBWW Bulb (wont flash)	willngton	1.3.1