Sickchill package stopeed after last sickchill GUI update

[kretzu77]

Is this a new Bug?

• I checkd that the bug hasn't been reported before

Package Name

sickchill

Package Version

20211110-4

Device Model

Synology DS1621xs+

Device Architecture

x86_64

Firmware Version

DSM 7.1

What happened?

After las GUI update, sickchill package don't start anymore
I tried manual Run, but stopped immediately
sickchill.log

Reproduction steps

1. Sickchill GUI update
2. Manual Run sickchill
3. ssh with command sudo chown -R sc-sickchill:sickchill /volume1/@appstore/sickchill/env with no luck
4. Even reboot NAS

Install Log

2022/08/18 11:32:33	start sickchill 20211110-4 Begin start-stop-status stop
2022/08/18 11:32:33	start sickchill 20211110-4 End start-stop-status stop ret=[0]
2022/08/18 11:32:34	start sickchill 20211110-4 Begin start-stop-status start
2022/08/18 11:32:35	start sickchill 20211110-4 End start-stop-status start ret=[0]
2022/08/18 11:32:46	start sickchill 20211110-4 Begin start-stop-status stop
2022/08/18 11:32:46	start sickchill 20211110-4 End start-stop-status stop ret=[0]
2022/08/18 11:32:47	start sickchill 20211110-4 Begin start-stop-status start
2022/08/18 11:32:48	start sickchill 20211110-4 End start-stop-status start ret=[0]
2022/08/18 11:36:02	start sickchill 20211110-4 Begin start-stop-status stop
2022/08/18 11:36:02	start sickchill 20211110-4 End start-stop-status stop ret=[0]
2022/08/18 11:36:03	start sickchill 20211110-4 Begin start-stop-status start
2022/08/18 11:36:04	start sickchill 20211110-4 End start-stop-status start ret=[0]
2022/08/18 11:39:28	start sickchill 20211110-4 Begin start-stop-status stop
2022/08/18 11:39:28	start sickchill 20211110-4 End start-stop-status stop ret=[0]
2022/08/18 11:39:29	start sickchill 20211110-4 Begin start-stop-status start
2022/08/18 11:39:30	start sickchill 20211110-4 End start-stop-status start ret=[0]

Service Log

No response

Other Logs

No response

[BenjV]

You cannot run a package from the commandline that way.
Packages need a number of environment variables to be set by the package center.
The way to start a package from the commandline is via:

synopkg start sickchill

But it should start normal, so the update broke something you should ask the sickchill developers, not the SynoCommunity

[hgy59]

fixed with #5458