u-root

Description

u-root embodies four different projects.

Go versions of many standard Linux tools, such as ls, cp, or shutdown. See cmds/core for most of these.
A way to compile many Go programs into a single binary with busybox mode.
A way to create initramfs (an archive of files) to use with Linux kernels, embeddable into firmware.
Go bootloaders that use kexec to boot Linux or multiboot kernels such as ESXi, Xen, or tboot. They are meant to be used with LinuxBoot.

Usage

Make sure your Go version is >=1.19.

Download and install u-root either via git:

git clone https://github.com/u-root/u-root
cd u-root
go build

The resulting binary will the be placed where go build was invoked

Or install directly with go:

go install github.com/u-root/u-root

Note: The u-root command will end up in $GOPATH/bin/u-root, so you may need to add $GOPATH/bin to your $PATH.

Templates

To quickly specify a set of commands from u-root, you can use any of the templates as defined in templates.go.

Examples

Here are some examples of using the u-root command to build an initramfs, with $UROOT_PATH being the path to where the u-root sources are on the disk (explicitly specifiying this is only necessary if not running u-root inside the root of the repository):

# Build an initramfs of all the Go cmds in ./cmds/core/... (default)
u-root

# Build an initramfs of all the Go cmds in ./cmds/core/...
# But running the command outside of the repository root
(cd /tmp && GBB_PATH=$UROOT_PATH u-root)

# Generate an archive with bootloaders
#
# core and boot are templates that expand to sets of commands
u-root core boot

# Generate an archive with only these given commands
u-root ./cmds/core/{init,ls,ip,dhclient,wget,cat,elvish}

# Generate an archive with all of the core tools with some exceptions
u-root core -cmds/core/{ls,losetup}

# Generate an archive with a tool outside of u-root
git clone https://github.com/u-root/cpu
u-root ./cmds/core/{init,ls,elvish} ./cpu/cmds/cpud

# Generate an archive with a tool outside of u-root, in any PWD
(cd /tmp && GBB_PATH=$UROOT_PATH:$CPU_PATH u-root ./cmds/core/{init,ls,elvish} ./cmds/cpud)

The default set of packages included is all packages in github.com/u-root/u-root/cmds/core/....

GBB_PATH is a place that u-root will look for commands. Each colon-separated GBB_PATH element is concatenated with patterns from the command-line and checked for existence. For example:

GBB_PATH=$HOME/u-root:$HOME/u-bmc u-root \
    cmds/core/init \
    cmds/core/elvish \
    cmd/socreset

# matches:
#   $HOME/u-root/cmds/core/init
#   $HOME/u-root/cmds/core/elvish
#   $HOME/u-bmc/cmd/socreset

Extra Files

You may also include additional files in the initramfs using the -files flag. If you add binaries with -files are listed, their ldd dependencies will be included as well. As example for Debian, you want to add two kernel modules for testing, executing your currently booted kernel:

NOTE: these files will be placed in the $HOME dir in the initramfs.

u-root -files $HOME/hello.ko -files $HOME/hello2.ko
qemu-system-x86_64 -kernel /boot/vmlinuz-$(uname -r) -initrd /tmp/initramfs.linux_amd64.cpio

To specify the location in the initramfs, use <sourcefile>:<destinationfile>. For example:

u-root -files "root-fs/usr/bin/runc:usr/bin/run"

Init and Uinit

u-root has a very simple (exchangable) init system controlled by the -initcmd and -uinitcmd command-line flags.

-initcmd determines what /init is symlinked to. -initcmd may be a u-root command name or a symlink target.
-uinitcmd is run by the default u-root init after some basic file system setup. There is no default, users should optionally supply their own. -uinitcmd may be a u-root command name with arguments or a symlink target with arguments.
After running a uinit (if there is one), init will start a shell determined by the -defaultsh argument.

We expect most users to keep their -initcmd as init, but to supply their own uinit for additional initialization or to immediately load another operating system.

All three command-line args accept both a u-root command name or a target symlink path. Only -uinitcmd accepts command-line arguments, however. For example,

u-root -uinitcmd="echo Go Gopher" ./cmds/core/{init,echo,elvish}

cpio -ivt < /tmp/initramfs.linux_amd64.cpio
# ...
# lrwxrwxrwx   0 root     root           12 Dec 31  1969 bin/uinit -> ../bbin/echo
# lrwxrwxrwx   0 root     root            9 Dec 31  1969 init -> bbin/init

qemu-system-x86_64 -kernel $KERNEL -initrd /tmp/initramfs.linux_amd64.cpio -nographic -append "console=ttyS0"
# ...
# [    0.848021] Freeing unused kernel memory: 896K
# 2020/05/01 04:04:39 Welcome to u-root!
#                              _
#   _   _      _ __ ___   ___ | |_
#  | | | |____| '__/ _ \ / _ \| __|
#  | |_| |____| | | (_) | (_) | |_
#   \__,_|    |_|  \___/ \___/ \__|
#
# Go Gopher
# ~/>

Passing command line arguments like above is equivalent to passing the arguments to uinit via a flags file in /etc/uinit.flags, see Extra Files.

Additionally, you can pass arguments to uinit via the uroot.uinitargs kernel parameters, for example:

u-root -uinitcmd="echo Gopher" ./cmds/core/{init,echo,elvish}

cpio -ivt < /tmp/initramfs.linux_amd64.cpio
# ...
# lrwxrwxrwx   0 root     root           12 Dec 31  1969 bin/uinit -> ../bbin/echo
# lrwxrwxrwx   0 root     root            9 Dec 31  1969 init -> bbin/init

qemu-system-x86_64 -kernel $KERNEL -initrd /tmp/initramfs.linux_amd64.cpio -nographic -append "console=ttyS0 uroot.uinitargs=Go"
# ...
# [    0.848021] Freeing unused kernel memory: 896K
# 2020/05/01 04:04:39 Welcome to u-root!
#                              _
#   _   _      _ __ ___   ___ | |_
#  | | | |____| '__/ _ \ / _ \| __|
#  | |_| |____| | | (_) | (_) | |_
#   \__,_|    |_|  \___/ \___/ \__|
#
# Go Gopher
# ~/>

Note the order of the passed arguments in the above example.

The command you name must be present in the command set. The following will not work:

u-root -uinitcmd="echo Go Gopher" ./cmds/core/{init,elvish}
# 2020/04/30 21:05:57 could not create symlink from "bin/uinit" to "echo": command or path "echo" not included in u-root build: specify -uinitcmd="" to ignore this error and build without a uinit

You can also refer to non-u-root-commands; they will be added as symlinks. We don't presume to know whether your symlink target is correct or not.

This will build, but not work unless you add a /bin/foobar to the initramfs.

u-root -uinitcmd="/bin/foobar Go Gopher" ./cmds/core/{init,elvish}

This will boot the same as the above.

u-root -uinitcmd="/bin/foobar Go Gopher" -files /bin/echo:bin/foobar -files your-hosts-file:/etc/hosts ./cmds/core/{init,elvish}

The effect of the above command:

Sets up the uinit command to be /bin/foobar, with 2 arguments: Go Gopher
Adds /bin/echo as bin/foobar
Adds your-hosts-file as etc/hosts
builds in the cmds/core/init, and cmds/core/elvish commands. The {} are expanded by the shell

This will bypass the regular u-root init and just launch a shell:

u-root -initcmd=elvish ./cmds/core/{elvish,ls}

cpio -ivt < /tmp/initramfs.linux_amd64.cpio
# ...
# lrwxrwxrwx   0 root     root            9 Dec 31  1969 init -> bbin/elvish

qemu-system-x86_64 -kernel $KERNEL -initrd /tmp/initramfs.linux_amd64.cpio -nographic -append "console=ttyS0"
# ...
# [    0.848021] Freeing unused kernel memory: 896K
# failed to put myself in foreground: ioctl: inappropriate ioctl for device
# ~/>

(It fails to do that because some initialization is missing when the shell is started without a proper init.)

Cross Compilation (targeting different architectures and OSes)

Cross-OS and -architecture compilation comes for free with Go. In fact, every PR to the u-root repo is built against the following architectures: amd64, x86 (i.e. 32bit), mipsle, armv7, arm64, and ppc64le.

Further, we run integration tests on linux/amd64, freebsd/amd64 and linux/arm64, using several CI systems. If you need to add another CI system, processor or OS, please let us know.

To cross compile for an ARM, on Linux:

GOARCH=arm u-root

If you are on OSX, and wish to build for Linux on AMD64:

GOOS=linux GOARCH=amd64 u-root

Testing in QEMU

A good way to test the initramfs generated by u-root is with qemu:

qemu-system-x86_64 -nographic -kernel path/to/kernel -initrd /tmp/initramfs.linux_amd64.cpio

Note that you do not have to build a special kernel on your own, it is sufficient to use an existing one. Usually you can find one in /boot.

If you quickly need to obtain a kernel, for example, when you are on a non-Linux system, you can assemble a URL to download one through Arch Linux's iPXE menu file. It would download from ${mirrorurl}iso/${release}/arch/boot/x86_64/vmlinuz-linux, so just search for a mirror URL you prefer and a release version, for example, http://mirror.rackspace.com/archlinux/iso/2022.05.01/arch/boot/x86_64/vmlinuz-linux.

Framebuffer

For framebuffer support, append a VESA mode via the vga kernel parameter:

qemu-system-x86_64 \
  -kernel path/to/kernel \
  -initrd /tmp/initramfs.linux_amd64.cpio \
  -append "vga=786"

For a list of modes, refer to the Linux kernel documentation.

Entropy / Random Number Generator

Some utilities, e.g., dhclient, require entropy to be present. For a speedy virtualized random number generator, the kernel should have the following:

CONFIG_VIRTIO_PCI=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_CRYPTO_DEV_VIRTIO=y

Then you can run your kernel in QEMU with a virtio-rng-pci device:

qemu-system-x86_64 \
    -device virtio-rng-pci \
    -kernel vmlinuz \
    -initrd /tmp/initramfs.linux_amd64.cpio

In addition, you can pass your host's RNG:

qemu-system-x86_64 \
    -object rng-random,filename=/dev/urandom,id=rng0 \
    -device virtio-rng-pci,rng=rng0 \
    -kernel vmlinuz \
    -initrd /tmp/initramfs.linux_amd64.cpio

u-root with Go package paths

For Go package paths to be usable, the path passed to u-root must be in the go.mod of the working directory or one of its parents. This is mostly useful for repositories making programmatic use of u-root's APIs.

cd ./u-root

# In u-root's directory itself, github.com/u-root/u-root is resolvable. There is
# a go.mod here that can refer to u-root.
u-root github.com/u-root/u-root/cmds/core/...
u-root github.com/u-root/u-root/cmds/core/*
u-root github.com/u-root/u-root/cmds/core/i*

To depend on commands outside of ones own repository, the easiest way to depend on Go commands is the following:

TMPDIR=$(mktemp -d)
cd $TMPDIR
go mod init foobar

Create a file with some unused build tag like this to create dependencies on commands:

//go:build tools

package something

import (
        "github.com/u-root/u-root/cmds/core/ip"
        "github.com/u-root/u-root/cmds/core/init"
        "github.com/hugelgupf/p9/cmd/p9ufs"
)

The unused build tag keeps it from being compiled, but its existence forces go mod tidy to add these dependencies to go.mod:

go mod tidy

u-root \
  github.com/u-root/u-root/cmds/core/ip \
  github.com/u-root/u-root/cmds/core/init \
  github.com/hugelgupf/p9/cmd/p9ufs

SystemBoot

SystemBoot is a set of bootloaders written in Go. It is meant to be a distribution for LinuxBoot to create a system firmware + bootloader. All of these use kexec to boot. The commands are in cmds/boot. Parsers are available for GRUB, syslinux, and other config files to make the transition to LinuxBoot easier.

pxeboot: a network boot client that uses DHCP and HTTP or TFTP to get a boot configuration which can be parsed as PXELinux or iPXE configuration files to get a boot program.
boot: finds all bootable kernels on local disk, shows a menu, and boots them. Supports (basic) GRUB, (basic) syslinux, (non-EFI) BootLoaderSpec, and ESXi configurations.
fbnetboot: a network boot client that uses DHCP and HTTP to get a boot program based on Linux, and boots it. To be merged with pxeboot.
localboot: a tool that finds bootable kernel configurations on the local disks and boots them.
systemboot: a wrapper around pxeboot and boot that just mimicks a BIOS/UEFI BDS behaviour, by looping between network booting and local booting. Use -uinitcmd argument to the u-root build tool to make it the boot program.

This project started as a loose collection of programs in u-root by various LinuxBoot contributors, as well as a personal experiment by Andrea Barberio that has since been merged in. It is now an effort of a broader community and graduated to a real project for system firmwares.

More detailed information about the build process for a full LinuxBoot firmware image using u-root/systemboot and coreboot can be found in the LinuxBoot book chapter about LinuxBoot using coreboot, u-root and systemboot.

You can build systemboot like this:

u-root -uinitcmd=systemboot core ./cmds/boot/{systemboot,localboot,fbnetboot}

Compression

You can compress the initramfs. However, for xz compression, the kernel has some restrictions on the compression options and it is suggested to align the file to 512 byte boundaries:

xz --check=crc32 -9 --lzma2=dict=1MiB \
   --stdout /tmp/initramfs.linux_amd64.cpio \
   | dd conv=sync bs=512 \
   of=/tmp/initramfs.linux_amd64.cpio.xz

Getting Packages of TinyCore

Using the tcz command included in u-root, you can install tinycore linux packages for things you want.

You can use QEMU NAT to allow you to fetch packages. Let's suppose, for example, you want bash. Once u-root is running, you can do this:

% tcz bash

The tcz command computes and fetches all dependencies. If you can't get to tinycorelinux.net, or you want package fetching to be faster, you can run your own server for tinycore packages.

You can do this to get a local server using the u-root srvfiles command:

% srvfiles -p 80 -d path-to-local-tinycore-packages

Of course you have to fetch all those packages first somehow :-)

Build an Embeddable u-root

You can build the cpio image created by u-root into a Linux kernel via the CONFIG_INITRAMFS_SOURCE config variable or coreboot config variable, and further embed the kernel image into firmware as a coreboot payload.

In the kernel and coreboot case, you may need to configure ethernet. We have a dhclient command that works for both ipv4 and ipv6. Since v6 does not yet work that well for most people, a typical invocation looks like this:

% dhclient -ipv4 -ipv6=false

Or, on newer linux kernels (> 4.x) boot with ip=dhcp in the command line, assuming your kernel is configured to work that way.

Build Modes

u-root can create an initramfs in two different modes, specified by -build:

gbb mode: One busybox-like binary comprising all the Go tools you ask to include. See the gobusybox README for how it works. In this mode, u-root copies and rewrites the source of the tools you asked to include to be able to compile everything into one busybox-like binary.
binary mode: each specified binary is compiled separately and all binaries are added to the initramfs.

Updating Dependencies

go get -u
go mod tidy
go mod vendor

Building without network access

Go modules require network access. If you need to make a repeatable build with no network access, make sure that your code is under $GOPATH and the environment variable GO111MODULE is set to off. This is:

Pick a location for your off-network build, it can be anywhere and the directory does not need to exist ahead of time:

export GOPATH=$(mktemp -d)

Fetch the code, you can use git, go get or even a release file, just make sure that the code ends in: ${GOPATH}/src/github.com/u-root/u-root E.g:

mkdir -p ${GOPATH}/src/github.com/u-root/
cd ${GOPATH}/src/github.com/u-root/
git clone https://github.com/u-root/u-root.git
cd u-root

Or simply:

GO111MODULE=off go get github.com/u-root/u-root
cd $GOPATH/src/github.com/u-root/u-root

Build u-root and use it normally:

GO111MODULE=off GOPROXY=off go build
GO111MODULE=off GOPROXY=off ./u-root

Hardware

If you want to see u-root on real hardware, this board is a good start.

Contributions

For information about contributing, including how we sign off commits, please see CONTRIBUTING.md.

Improving existing commands (e.g., additional currently unsupported flags) is very welcome. In this case it is not even required to build an initramfs, just enter the cmds/ directory and start coding. A list of commands that are on the roadmap can be found here.

Name		Name	Last commit message	Last commit date
Latest commit History 4,280 Commits
.circleci		.circleci
.github		.github
cmds		cmds
configs		configs
docs		docs
examples		examples
files/etc/profile.d		files/etc/profile.d
integration		integration
pkg		pkg
tools		tools
vendor		vendor
.gitignore		.gitignore
AUTHORS		AUTHORS
CONTRIBUTING.md		CONTRIBUTING.md
LICENSE		LICENSE
MAINTAINERS		MAINTAINERS
README.md		README.md
RELEASES		RELEASES
SECURITY.md		SECURITY.md
codecov.yml		codecov.yml
go.mod		go.mod
go.sum		go.sum
roadmap.md		roadmap.md
templates.go		templates.go
tricksandtips.md		tricksandtips.md
u-root.go		u-root.go
uroot_test.go		uroot_test.go

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

u-root

Description

Usage

Templates

Examples

Extra Files

Init and Uinit

Cross Compilation (targeting different architectures and OSes)

Testing in QEMU

Framebuffer

Entropy / Random Number Generator

u-root with Go package paths

SystemBoot

Compression

Getting Packages of TinyCore

Build an Embeddable u-root

Build Modes

Updating Dependencies

Building without network access

Hardware

Contributions

About

Releases

Packages

Languages

License

TrenchBoot/u-root

Folders and files

Latest commit

History

Repository files navigation

u-root

Description

Usage

Templates

Examples

Extra Files

Init and Uinit

Cross Compilation (targeting different architectures and OSes)

Testing in QEMU

Framebuffer

Entropy / Random Number Generator

u-root with Go package paths

SystemBoot

Compression

Getting Packages of TinyCore

Build an Embeddable u-root

Build Modes

Updating Dependencies

Building without network access

Hardware

Contributions

About

Resources

License

Security policy

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages