multimedia/gst123: fix build on SmartOS #124
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
jperkin
pushed a commit
that referenced
this pull request
Dec 9, 2013
Changelog since 3.3.1 3.4.3 - 11/30/2012 ------------------ - Reverted squeue changes intended for Nagios 4 - Reapplied all patches from 3.4.2 release - Applied fix for pagination and sorting on status.cgi #381 (Phil Randal) 3.4.2 - 11/09/2012 ------------------ FIXES * Fixed issue where deleting a downtime could cause Nagios to crash (Eric Stanley) * Corrected logic so that end times for flexible downtimes are calculated from the dow ntime start rather than the current time in the case where Nagios is restarted (Eric S tanley) * Fixed issue introduced by fix for bug #124 where flexible downtimes are not taken in to account on Nagios restart. (Scott Wilkerson, Eric Stanley) * Fixed bug #247: If a service reports no performance data, the perfdata log file has no line indicating the test. (omnikron@free.fr) * Fixed link for unhandled unreachable host problems on tactical overview page (Rudolf Cejka) * Fixed bug #345 with wild card searches not paging properly on status.cgi (Phil Randa l) * Fixed bug #343 on status.cgi where Service Group Summary can potentially show wrong totals (Mark Ziesemer) * Fixed memory leaks on SIGHUP (Carlos Velasco) 3.4.1 - 05/11/2012 ------------------ FIXES * Double quotes in check_command definition break functionality (#332, reverts #86) 3.4.0 - 05/04/2012 ------------------ ENHANCEMENTS * Added service_check_timeout_state configuration variable (Bill McGonigle) * Permanently remove sleep on run_event == FALSE in main loop (Max <perldork@webwizard design.com>) * Reduce notification load by moving notification viability check into notification li st creation (Opsview Team) * Added code to apply allow_empty_hostgroup_assignment flag to host and service depend encies (Daniel Wittenberg) * Users can now see hostgroups and servicegroups that contain at least one host or ser vice they are authorized for, instead of having to be authorized for them all (Ethan G alstad) * RSS feed boxes fallback if an error occurs (Ethan Galstad) * RSS feeds no longer block main page load (Mike Guthrie) FIXES * Fix $NOTIFICATIONRECIPIENTS$ macro to contain all contacts assigned to host|service, not only notified contacts (Bug #98 Matt Harrington) * Scheduled Downtime Notifications Resent On Nagios Restart/reload (Bug #124 - ricardo ) * NOTIFICATIONTYPE MACRO never became CUSTOM (Bug #168 - Alexey Dvoryanchikov) * Plugged minor memory leaks in notification logic
|
Fixed upstream, thanks! |
jperkin
pushed a commit
that referenced
this pull request
Jan 6, 2014
Release 3.1.1 - 2013/12/29 -------------------------- Improvements ^^^^^^^^^^^^ * [deb] Refined Groonga packages for Debian policy. [groonga-dev,01930] [Suggested by Hideki Yamane] * [deb] Dropped Debian 6.0 (squeeze) support. * [deb] Dropped Ubuntu 10.04 (lucid) support. * Supported :doc:`/reference/functions/geo_in_rectangle` in the whole world. * Supported error report when failed to casting invalid value of geo point type. * Exported some macros which is used for accessing pseudo column names. [groonga-dev,1999] [Suggested by whombx] * [doc] Refined drilldown documentation. [Reported by @Yahppo] * Supported :doc:`/reference/functions/between` function which is used for filtering the column value in specific range. * [doc] Updated Travis CI envrinment information. [Patch by cosmo0920] * [rpm][fedora] Dropped Fedora 19. * [rpm][fedora] Supported Fedora 20. * [doc] Updated "Groonga" notation. [Patch by cosmo0920] [GitHub#122, #123, #124, #125, #125, #126, #127, #128, #129, #130, #131, #131, #132, #133, #134] Fixes ^^^^^ * [munin] Fixed the wrong port number which is specified for GQTP. * [geo_in_circle] Fixed a bug that if you specify "LONGITUDExLATITUDE" as the 3rd argument of :doc:`/reference/functions/geo_in_circle`, Groonga crashes. Thanks ^^^^^^ * Hideki Yamane * whombx * @yappo * cosmo0920
jperkin
pushed a commit
that referenced
this pull request
Jan 13, 2014
----- 2.0.2 ----- * Fix NameError during installation with Python implementations (e.g. Jython) not containing parser module. * Fix NameError in ``sdist:re_finder``. ----- 2.0.1 ----- * Issue #124: Fixed error in list detection in upload_docs. --- 2.0 --- * Issue #121: Exempt lib2to3 pickled grammars from DirectorySandbox. * Issue #41: Dropped support for Python 2.4 and Python 2.5. Clients requiring setuptools for those versions of Python should use setuptools 1.x. * Removed ``setuptools.command.easy_install.HAS_USER_SITE``. Clients expecting this boolean variable should use ``site.ENABLE_USER_SITE`` instead. * Removed ``pkg_resources.ImpWrapper``. Clients that expected this class should use ``pkgutil.ImpImporter`` instead. ----- 1.4.2 ----- * Issue #116: Correct TypeError when reading a local package index on Python 3. ----- 1.4.1 ----- * Issue #114: Use ``sys.getfilesystemencoding`` for decoding config in ``bdist_wininst`` distributions. * Issue #105 and Issue #113: Establish a more robust technique for determining the terminal encoding:: 1. Try ``getpreferredencoding`` 2. If that returns US_ASCII or None, try the encoding from ``getdefaultlocale``. If that encoding was a "fallback" because Python could not figure it out from the environment or OS, encoding remains unresolved. 3. If the encoding is resolved, then make sure Python actually implements the encoding. 4. On the event of an error or unknown codec, revert to fallbacks (UTF-8 on Darwin, ASCII on everything else). 5. On the encoding is 'mac-roman' on Darwin, use UTF-8 as 'mac-roman' was a bug on older Python releases. On a side note, it would seem that the encoding only matters for when SVN does not yet support ``--xml`` and when getting repository and svn version numbers. The ``--xml`` technique should yield UTF-8 according to some messages on the SVN mailing lists. So if the version numbers are always 7-bit ASCII clean, it may be best to only support the file parsing methods for legacy SVN releases and support for SVN without the subprocess command would simple go away as support for the older SVNs does. --- 1.4 --- * Issue #27: ``easy_install`` will now use credentials from .pypirc if present for connecting to the package index. * Pull Request #21: Omit unwanted newlines in ``package_index._encode_auth`` when the username/password pair length indicates wrapping. ----- 1.3.2 ----- * Issue #99: Fix filename encoding issues in SVN support. ----- 1.3.1 ----- * Remove exuberant warning in SVN support when SVN is not used.
jperkin
pushed a commit
that referenced
this pull request
Jan 21, 2014
Release 3.1.1 - 2013/12/29 -------------------------- Improvements ^^^^^^^^^^^^ * [deb] Refined Groonga packages for Debian policy. [groonga-dev,01930] [Suggested by Hideki Yamane] * [deb] Dropped Debian 6.0 (squeeze) support. * [deb] Dropped Ubuntu 10.04 (lucid) support. * Supported :doc:`/reference/functions/geo_in_rectangle` in the whole world. * Supported error report when failed to casting invalid value of geo point type. * Exported some macros which is used for accessing pseudo column names. [groonga-dev,1999] [Suggested by whombx] * [doc] Refined drilldown documentation. [Reported by @Yahppo] * Supported :doc:`/reference/functions/between` function which is used for filtering the column value in specific range. * [doc] Updated Travis CI envrinment information. [Patch by cosmo0920] * [rpm][fedora] Dropped Fedora 19. * [rpm][fedora] Supported Fedora 20. * [doc] Updated "Groonga" notation. [Patch by cosmo0920] [GitHub#122, #123, #124, #125, #125, #126, #127, #128, #129, #130, #131, #131, #132, #133, #134] Fixes ^^^^^ * [munin] Fixed the wrong port number which is specified for GQTP. * [geo_in_circle] Fixed a bug that if you specify "LONGITUDExLATITUDE" as the 3rd argument of :doc:`/reference/functions/geo_in_circle`, Groonga crashes. Thanks ^^^^^^ * Hideki Yamane * whombx * @yappo * cosmo0920
jperkin
pushed a commit
that referenced
this pull request
Jan 21, 2014
----- 2.0.2 ----- * Fix NameError during installation with Python implementations (e.g. Jython) not containing parser module. * Fix NameError in ``sdist:re_finder``. ----- 2.0.1 ----- * Issue #124: Fixed error in list detection in upload_docs. --- 2.0 --- * Issue #121: Exempt lib2to3 pickled grammars from DirectorySandbox. * Issue #41: Dropped support for Python 2.4 and Python 2.5. Clients requiring setuptools for those versions of Python should use setuptools 1.x. * Removed ``setuptools.command.easy_install.HAS_USER_SITE``. Clients expecting this boolean variable should use ``site.ENABLE_USER_SITE`` instead. * Removed ``pkg_resources.ImpWrapper``. Clients that expected this class should use ``pkgutil.ImpImporter`` instead. ----- 1.4.2 ----- * Issue #116: Correct TypeError when reading a local package index on Python 3. ----- 1.4.1 ----- * Issue #114: Use ``sys.getfilesystemencoding`` for decoding config in ``bdist_wininst`` distributions. * Issue #105 and Issue #113: Establish a more robust technique for determining the terminal encoding:: 1. Try ``getpreferredencoding`` 2. If that returns US_ASCII or None, try the encoding from ``getdefaultlocale``. If that encoding was a "fallback" because Python could not figure it out from the environment or OS, encoding remains unresolved. 3. If the encoding is resolved, then make sure Python actually implements the encoding. 4. On the event of an error or unknown codec, revert to fallbacks (UTF-8 on Darwin, ASCII on everything else). 5. On the encoding is 'mac-roman' on Darwin, use UTF-8 as 'mac-roman' was a bug on older Python releases. On a side note, it would seem that the encoding only matters for when SVN does not yet support ``--xml`` and when getting repository and svn version numbers. The ``--xml`` technique should yield UTF-8 according to some messages on the SVN mailing lists. So if the version numbers are always 7-bit ASCII clean, it may be best to only support the file parsing methods for legacy SVN releases and support for SVN without the subprocess command would simple go away as support for the older SVNs does. --- 1.4 --- * Issue #27: ``easy_install`` will now use credentials from .pypirc if present for connecting to the package index. * Pull Request #21: Omit unwanted newlines in ``package_index._encode_auth`` when the username/password pair length indicates wrapping. ----- 1.3.2 ----- * Issue #99: Fix filename encoding issues in SVN support. ----- 1.3.1 ----- * Remove exuberant warning in SVN support when SVN is not used.
jperkin
pushed a commit
that referenced
this pull request
Jan 21, 2014
FITS (Flexible Image Transport System) is a data format most used in astronomy.
PyFITS is a Python module for reading, writing, and manipulating FITS files.
The module uses Python's object-oriented features to provide quick, easy, and
efficient access to FITS files. The use of Python's array syntax enables
immediate access to any FITS extension, header cards, or data items.
Changes to 2.4.0 (in py-pyfits):
Changelog
===========
3.2 (2013-11-26)
----------------
Highlights
^^^^^^^^^^
- Rewrote CFITSIO-based backend for handling tile compression of FITS files.
It now uses a standard CFITSIO instead of heavily modified pieces of CFITSIO
as before. PyFITS ships with its own copy of CFITSIO v3.35 which supports
the latest version of the Tiled Image Convention (v2.3), but system
packagers may choose instead to strip this out in favor of a
system-installed version of CFITSIO. Earlier versions may work, but nothing
earlier than 3.28 has been tested yet. (#169)
- Added support for reading and writing tables using the Q format for columns.
The Q format is identical to the P format (variable-length arrays) except
that it uses 64-bit integers for the data descriptors, allowing more than
4 GB of variable-length array data in a single table. (#160)
- Added initial support for table columns containing pseudo-unsigned integers.
This is currently enabled by using the ``uint=True`` option when opening
files; any table columns with the correct BZERO value will be interpreted
and returned as arrays of unsigned integers.
- Some refactoring of the table and ``FITS_rec`` modules in order to better
separate the details of the FITS binary and ASCII table data structures from
the HDU data structures that encapsulate them. Most of these changes should
not be apparent to users (but see API Changes below).
API Changes
^^^^^^^^^^^
- Assigning to values in ``ColDefs.names``, ``ColDefs.formats``,
``ColDefs.nulls`` and other attributes of ``ColDefs`` instances that return
lists of column properties is no longer supported. Assigning to those lists
will no longer update the corresponding columns. Instead, please just
modify the ``Column`` instances directly (``Column.name``, ``Column.null``,
etc.)
- The ``pyfits.new_table`` function is marked "pending deprecation". This
does not mean it will be removed outright or that its functionality has
changed. It will likely be replaced in the future for a function with
similar, if not subtly different functionality. A better, if not slightly
more verbose approach is to use ``pyfits.FITS_rec.from_columns`` to create
a new ``FITS_rec`` table--this has the same interface as
``pyfits.new_table``. The difference is that it returns a plan ``FITS_rec``
array, and not an HDU instance. This ``FITS_rec`` object can then be used
as the data argument in the constructors for ``BinTableHDU`` (for binary
tables) or ``TableHDU`` (for ASCII tables). This is analogous to creating
an ``ImageHDU`` by passing in an image array.
``pyfits.FITS_rec.from_columns`` is just a simpler way of creating a
FITS-compatible recarray from a FITS column specification.
- The ``updateHeader``, ``updateHeaderData``, and ``updateCompressedData``
methods of the ``CompDataHDU`` class are pending deprecation and moved to
internal methods. The operation of these methods depended too much on
internal state to be used safely by users; instead they are invoked
automatically in the appropriate places when reading/writing compressed image
HDUs.
- The ``CompDataHDU.compData`` attribute is pending deprecation in favor of
the clearer and more PEP-8 compatible ``CompDataHDU.compressed_data``.
- The constructor for ``CompDataHDU`` has been changed to accept new keyword
arguments. The new keyword arguments are essentially the same, but are in
underscore_separated format rather than camelCase format. The old arguments
are still pending deprecation.
- The internal attributes of HDU classes ``_hdrLoc``, ``_datLoc``, and
``_datSpan`` have been replaced with ``_header_offset``, ``_data_offset``,
and ``_data_size`` respectively. The old attribute names are still pending
deprecation. This should only be of interest to advanced users who have
created their own HDU subclasses.
- The following previously deprecated functions and methods have been removed
entirely: ``createCard``, ``createCardFromString``, ``upperKey``,
``ColDefs.data``, ``setExtensionNameCaseSensitive``, ``_File.getfile``,
``_TableBaseHDU.get_coldefs``, ``Header.has_key``, ``Header.ascardlist``.
If you run your code with a previous version of PyFITS (>= 3.0, < 3.2) with
the ``python -Wd`` argument, warnings for all deprecated interfaces still in
use will be displayed.
- Interfaces that were pending deprecation are now fully deprecated. These
include: ``create_card``, ``create_card_from_string``, ``upper_key``,
``Header.get_history``, and ``Header.get_comment``.
- The ``.name`` attribute on HDUs is now directly tied to the HDU's header, so
that if ``.header['EXTNAME']`` changes so does ``.name`` and vice-versa.
- The ``pyfits.file.PYTHON_MODES`` constant dict was renamed to
``pyfits.file.PYFITS_MODES`` which better reflects its purpose. This is
rarely used by client code, however. Support for the old name will be
removed by PyFITS 3.4.
Other Changes and Additions
^^^^^^^^^^^^^^^^^^^^^^^^^^^
- The new compression code also adds support for the ZQUANTIZ and ZDITHER0
keywords added in more recent versions of this FITS Tile Compression spec.
This includes support for lossless compression with GZIP. (#198) By default
no dithering is used, but the ``SUBTRACTIVE_DITHER_1`` and
``SUBTRACTIVE_DITHER_2`` methods can be enabled by passing the correct
constants to the ``quantize_method`` argument to the ``CompImageHDU``
constuctor. A seed can be manually specified, or automatically generated
using either the system clock or checksum-based methods via the
``dither_seed`` argument. See the documentation for ``CompImageHDU`` for
more details. (#198) (spacetelescope/PYFITS#32)
- Images compressed with the Tile Compression standard can now be larger than
4 GB through support of the Q format. (#159)
- All HDUs now have a ``.ver`` ``.level`` attribute that returns the value of
the EXTVAL and EXTLEVEL keywords from that HDU's header, if the exist. This
was added for consistency with the ``.name`` attribute which returns the
EXTNAME value from the header.
- Then ``Column`` and ``ColDefs`` classes have new ``.dtype`` attributes
which give the Numpy dtype for the column data in the first case, and the
full Numpy compound dtype for each table row in the latter case.
- There was an issue where new tables created defaulted the values in all
string columns to '0.0'. Now string columns are filled with empty strings
by default--this seems a less surprising default, but it may cause
differences with tables created with older versions of PyFITS.
- Improved round-tripping and preservation of manually assigned column
attributes (``TNULLn``, ``TSCALn``, etc.) in table HDU headers.
(astropy/astropy#996)
Bug Fixes
^^^^^^^^^
- Binary tables containing compressed images may, optionally, contain other
columns unrelated to the tile compression convention. Although this is an
uncommon use case, it is permitted by the standard. (#159)
- Reworked some of the file I/O routines to allow simpler, more consistent
mapping between OS-level file modes ('rb', 'wb', 'ab', etc.) and the more
"PyFITS-specific" modes used by PyFITS like "readonly" and "update".
That is, if reading a FITS file from an open file object, it doesn't matter
as much what "mode" it was opened in so long as it has the right
capabilities (read/write/etc.) Also works around bugs in the Python io
module in 2.6+ with regard to file modes. (spacetelescope/PyFITS#33)
- Fixed an obscure issue that can occur on systems that don't have flush to
memory-mapped files implemented (namely GNU Hurd). (astropy/astropy#968)
3.1.3 (2013-11-26)
------------------
- Disallowed assigning NaN and Inf floating point values as header values,
since the FITS standard does not define a way to represent them in. Because
this is undefined, the previous behavior did not make sense and produced
invalid FITS files. (spacetelescope/PyFITS#11)
- Added a workaround for a bug in 64-bit OSX that could cause truncation when
writing files greater than 2^32 bytes in size. (spacetelescope/PyFITS#28)
- Fixed a long-standing issue where writing binary tables did not correctly
write the TFORMn keywords for variable-length array columns (they ommitted
the max array length parameter of the format). This was thought fixed in
v3.1.2, but it was only fixed there for compressed image HDUs and not for
binary tables in general.
- Fixed an obscure issue that can occur on systems that don't have flush to
memory-mapped files implemented (namely GNU Hurd). (Backported from 3.2)
3.0.12 (2013-11-26)
-------------------
- Disallowed assigning NaN and Inf floating point values as header values,
since the FITS standard does not define a way to represent them in. Because
this is undefined, the previous behavior did not make sense and produced
invalid FITS files. (Backported from 3.1.3)
- Added a workaround for a bug in 64-bit OSX that could cause truncation when
writing files greater than 2^32 bytes in size. (Backported from 3.1.3)
- Fixed a long-standing issue where writing binary tables did not correctly
write the TFORMn keywords for variable-length array columns (they ommitted
the max array length parameter of the format). This was thought fixed in
v3.1.2, but it was only fixed there for compressed image HDUs and not for
binary tables in general. (Backported from 3.1.3)
- Fixed an obscure issue that can occur on systems that don't have flush to
memory-mapped files implemented (namely GNU Hurd). (Backported from 3.2)
3.1.2 (2013-04-22)
------------------
- When an error occurs opening a file in fitsdiff the exception message will
now at least mention which file had the error. (#168)
- Fixed support for opening gzipped FITS files by filename in a writeable mode
(PyFITS has supported writing to gzip files for some time now, but only
enabled it when GzipFile objects were passed to ``pyfits.open()`` due to
some legacy code preventing full gzip support. (#195)
- Added a more helpful error message in the case of malformatted FITS files
that contain non-float NULL values in an ASCII table but are missing the
required TNULLn keywords in the header. (#197)
- Fixed an (apparently long-standing) issue where writing compressed images
did not correctly write the TFORMn keywords for variable-length array
columns (they ommitted the max array length parameter of the format). (#199)
- Slightly refactored how tables containing variable-length array columns are
handled to add two improvements: Fixes an issue where accessing the data
after a call to the `pyfits.getdata` convenience function caused an
exception, and allows the VLA data to be read from an existing mmap of the
FITS file. (#200)
- Fixed a bug that could occur when opening a table containing
multi-dimensional columns (i.e. via the TDIMn keyword) and then writing it
out to a new file. (#201)
- Added use of the console_scripts entry point to install the fitsdiff and
fitscheck scripts, which if nothing else provides better Windows support.
The generated scripts now override the ones explicitly defined in the
scripts/ directory (which were just trivial stubs to begin with). (#202)
- Fixed a bug on Python 3 where attempting to open a non-existent file on
Python 3 caused a seemingly unrelated traceback. (#203)
- Fixed a bug in fitsdiff that reported two header keywords containing NaN
as value as different. (#204)
- Fixed an issue in the tests that caused some tests to fail if pyfits is
installed with read-only permissions. (#208)
- Fixed a bug where instantiating a ``BinTableHDU`` from a numpy array
containing boolean fields converted all the values to ``False``. (#215)
- Fixed an issue where passing an array of integers into the constructor of
``Column()`` when the column type is floats of the same byte width caused the
column array to become garbled. (#218)
- Fixed inconsistent behavior in creating CONTINUE cards from byte strings
versus unicode strings in Python 2--CONTINUE cards can now be created
properly from unicode strings (so long as they are convertable to ASCII).
(spacetelescope/PyFITS#1)
- Fixed a couple cases where creating a new table using TDIMn in some of the
columns could caused a crash. (spacetelescope/PyFITS#3)
- Fixed a bug in parsing HIERARCH keywords that do not have a space after
the first equals sign (before the value). (spacetelescope/PyFITS#5)
- Prevented extra leading whitespace on HIERARCH keywords from being treated
as part of the keyword. (spacetelescope/PyFITS#6)
- Fixed a bug where HIERARCH keywords containing lower-case letters was
mistakenly marked as invalid during header validation.
(spacetelescope/PyFITS#7)
- Fixed an issue that was ancillary to (spacetelescope/PyFITS#7) where the
``Header.index()`` method did not work correctly with HIERARCH keywords
containing lower-case letters.
3.0.11 (2013-04-17)
-------------------
- Fixed support for opening gzipped FITS files by filename in a writeable mode
(PyFITS has supported writing to gzip files for some time now, but only
enabled it when GzipFile objects were passed to ``pyfits.open()`` due to
some legacy code preventing full gzip support. Backported from 3.1.2. (#195)
- Added a more helpful error message in the case of malformatted FITS files
that contain non-float NULL values in an ASCII table but are missing the
required TNULLn keywords in the header. Backported from 3.1.2. (#197)
- Fixed an (apparently long-standing) issue where writing compressed images did
not correctly write the TFORMn keywords for variable-length array columns
(they ommitted the max array length parameter of the format). Backported from
3.1.2. (#199)
- Slightly refactored how tables containing variable-length array columns are
handled to add two improvements: Fixes an issue where accessing the data
after a call to the `pyfits.getdata` convenience function caused an
exception, and allows the VLA data to be read from an existing mmap of the
FITS file. Backported from 3.1.2. (#200)
- Fixed a bug that could occur when opening a table containing
multi-dimensional columns (i.e. via the TDIMn keyword) and then writing it
out to a new file. Backported from 3.1.2. (#201)
- Fixed a bug on Python 3 where attempting to open a non-existent file on
Python 3 caused a seemingly unrelated traceback. Backported from 3.1.2.
(#203)
- Fixed a bug in fitsdiff that reported two header keywords containing NaN
as value as different. Backported from 3.1.2. (#204)
- Fixed an issue in the tests that caused some tests to fail if pyfits is
installed with read-only permissions. Backported from 3.1.2. (#208)
- Fixed a bug where instantiating a ``BinTableHDU`` from a numpy array
containing boolean fields converted all the values to ``False``. Backported
from 3.1.2. (#215)
- Fixed an issue where passing an array of integers into the constructor of
``Column()`` when the column type is floats of the same byte width caused the
column array to become garbled. Backported from 3.1.2. (#218)
- Fixed a couple cases where creating a new table using TDIMn in some of the
columns could caused a crash. Backported from 3.1.2.
(spacetelescope/PyFITS#3)
3.1.1 (2013-01-02)
------------------
This is a bug fix release for the 3.1.x series.
Bug Fixes
^^^^^^^^^
- Improved handling of scaled images and pseudo-unsigned integer images in
compressed image HDUs. They now work more transparently like normal image
HDUs with support for the ``do_not_scale_image_data`` and ``uint`` options,
as well as ``scale_back`` and ``save_backup``. The ``.scale()`` method
works better too. (#88)
- Permits non-string values for the EXTNAME keyword when reading in a file,
rather than throwing an exception due to the malformatting. Added
verification for the format of the EXTNAME keyword when writing. (#96)
- Added support for EXTNAME and EXTVER in PRIMARY HDUs. That is, if EXTNAME
is specified in the header, it will also be reflected in the ``.name``
attribute and in ``pyfits.info()``. These keywords used to be verboten in
PRIMARY HDUs, but the latest version of the FITS standard allows them.
(#151)
- HCOMPRESS can again be used to compress data cubes (and higher-dimensional
arrays) so long as the tile size is effectively 2-dimensional. In fact,
PyFITS will automatically use compatible tile sizes even if they're not
explicitly specified. (#171)
- Added support for the optional ``endcard`` parameter in the
``Header.fromtextfile()`` and ``Header.totextfile()`` methods. Although
``endcard=False`` was a reasonable default assumption, there are still text
dumps of FITS headers that include the END card, so this should have been
more flexible. (#176)
- Fixed a crash when running fitsdiff on two empty (that is, zero row) tables.
(#178)
- Fixed an issue where opening files containing random groups HDUs in update
mode could cause an unnecessary rewrite of the file even if none of the
data is modified. (#179)
- Fixed a bug that could caused a deadlock in the filesystem on OSX if PyFITS
is used with Numpy 1.7 in some cases. (#180)
- Fixed a crash when generating diff reports from diffs using the
``ignore_comments`` options. (#181)
- Fixed some bugs with WCS Paper IV record-valued keyword cards:
- Cards that looked kind of like RVKCs but were not intended to be were
over-permissively treated as such--commentary keywords like COMMENT and
HISTORY were particularly affected. (#183)
- Looking up a card in a header by its standard FITS keyword only should
always return the raw value of that card. That way cards containing
values that happen to valid RVKCs but were not intended to be will still
be treated like normal cards. (#184)
- Looking up a RVKC in a header with only part of the field-specifier (for
example "DP1.AXIS" instead of "DP1.AXIS.1") was implicitly treated as a
wildcard lookup. (#184)
- Fixed a crash when diffing two FITS files where at least one contains a
compressed image HDU which was not recognized as an image instead of a
table. (#187)
- Fixed bugs in the backwards compatibility layer for the ``CardList.index``
and ``CardList.count`` methods. (#190)
- Improved ``__repr__`` and text file representation of cards with long values
that are split into CONTINUE cards. (#193)
- Fixed a crash when trying to assign a long (> 72 character) value to blank
('') keywords. This also changed how blank keywords are represented--there
are still exactly 8 spaces before any commentary content can begin; this
*may* affect the exact display of header cards that assumed there could be
fewer spaces in a blank keyword card before the content begins. However, the
current approach is more in line with the requirements of the FITS standard.
(#194)
3.0.10 (2013-01-02)
-------------------
- Improved handling of scaled images and pseudo-unsigned integer images in
compressed image HDUs. They now work more transparently like normal image
HDUs with support for the ``do_not_scale_image_data`` and ``uint`` options,
as well as ``scale_back`` and ``save_backup``. The ``.scale()`` method
works better too. Backported from 3.1.1. (#88)
- Permits non-string values for the EXTNAME keyword when reading in a file,
rather than throwing an exception due to the malformatting. Added
verification for the format of the EXTNAME keyword when writing. Backported
from 3.1.1. (#96)
- Added support for EXTNAME and EXTVER in PRIMARY HDUs. That is, if EXTNAME
is specified in the header, it will also be reflected in the ``.name``
attribute and in ``pyfits.info()``. These keywords used to be verbotten in
PRIMARY HDUs, but the latest version of the FITS standard allows them.
Backported from 3.1.1. (#151)
- HCOMPRESS can again be used to compress data cubes (and higher-dimensional
arrays) so long as the tile size is effectively 2-dimensional. In fact,
PyFITS will not automatically use compatible tile sizes even if they're not
explicitly specified. Backported from 3.1.1. (#171)
- Fixed a bug when writing out files containing zero-width table columns,
where the TFIELDS keyword would be updated incorrectly, leaving the table
largely unreadable. Backported from 3.1.0. (#174)
- Fixed an issue where opening files containing random groups HDUs in update
mode could cause an unnecessary rewrite of the file even if none of the
data is modified. Backported from 3.1.1. (#179)
- Fixed a bug that could caused a deadlock in the filesystem on OSX if PyFITS
is used with Numpy 1.7 in some cases. Backported from 3.1.1. (#180)
3.1 (2012-08-08)
----------------
Highlights
^^^^^^^^^^
- The ``Header`` object has been significantly reworked, and ``CardList``
objects are now deprecated (their functionality folded into the ``Header``
class). See API Changes below for more details.
- Memory maps are now used by default to access HDU data. See API Changes
below for more details.
- Now includes a new version of the ``fitsdiff`` program for comparing two
FITS files, and a new FITS comparison API used by ``fitsdiff``. See New
Features below.
API Changes
^^^^^^^^^^^
- The ``Header`` class has been rewritten, and the ``CardList`` class is
deprecated. Most of the basic details of working with FITS headers are
unchanged, and will not be noticed by most users. But there are differences
in some areas that will be of interest to advanced users, and to application
developers. For full details of the changes, see the "Header Interface
Transition Guide" section in the PyFITS documentation. See ticket #64 on
the PyFITS Trac for futher details and background. Some highlights are
listed below:
* The Header class now fully implements the Python dict interface, and can
be used interchangably with a dict, where the keys are header keywords.
* New keywords can be added to the header using normal keyword assignment
(previously it was necessary to use ``Header.update`` to add new
keywords). For example::
>>> header['NAXIS'] = 2
will update the existing 'FOO' keyword if it already exists, or add a new
one if it doesn't exist, just like a dict.
* It is possible to assign both a value and a comment at the same time using
a tuple::
>>> header['NAXIS'] = (2, 'Number of axes')
* To add/update a new card and ensure it's added in a specific location, use
``Header.set()``::
>>> header.set('NAXIS', 2, 'Number of axes', after='BITPIX')
This works the same as the old ``Header.update()``. ``Header.update()``
still works in the old way too, but is deprecated.
* Although ``Card`` objects still exist, it generally is not necessary to
work with them directly. ``Header.ascardlist()``/``Header.ascard`` are
deprecated and should not be used. To directly access the ``Card``
objects in a header, use ``Header.cards``.
* To access card comments, it is still possible to either go through the
card itself, or through ``Header.comments``. For example::
>>> header.cards['NAXIS'].comment
Number of axes
>>> header.comments['NAXIS']
Number of axes
* ``Card`` objects can now be used interchangeably with
``(keyword, value, comment)`` 3-tuples. They still have ``.value`` and
``.comment`` attributes as well. The ``.key`` attribute has been renamed
to ``.keyword`` for consistency, though ``.key`` is still supported (but
deprecated).
- Memory mapping is now used by default to access HDU data. That is,
``pyfits.open()`` uses ``memmap=True`` as the default. This provides better
performance in the majority of use cases--there are only some I/O intensive
applications where it might not be desirable. Enabling mmap by default also
enabled finding and fixing a large number of bugs in PyFITS' handling of
memory-mapped data (most of these bug fixes were backported to PyFITS
3.0.5). (#85)
* A new ``pyfits.USE_MEMMAP`` global variable was added. Set
``pyfits.USE_MEMMAP = False`` to change the default memmap setting for
opening files. This is especially useful for controlling the behavior in
applications where pyfits is deeply embedded.
* Likewise, a new ``PYFITS_USE_MEMMAP`` environment variable is supported.
Set ``PYFITS_USE_MEMMAP = 0`` in your environment to change the default
behavior.
- The ``size()`` method on HDU objects is now a ``.size`` property--this
returns the size in bytes of the data portion of the HDU, and in most cases
is equivalent to ``hdu.data.nbytes`` (#83)
- ``BinTableHDU.tdump`` and ``BinTableHDU.tcreate`` are deprecated--use
``BinTableHDU.dump`` and ``BinTableHDU.load`` instead. The new methods
output the table data in a slightly different format from previous versions,
which places quotes around each value. This format is compatible with data
dumps from previous versions of PyFITS, but not vice-versa due to a parsing
bug in older versions.
- Likewise the ``pyfits.tdump`` and ``pyfits.tcreate`` convenience function
versions of these methods have been renamed ``pyfits.tabledump`` and
``pyfits.tableload``. The old deprecated, but currently retained for
backwards compatibility. (r1125)
- A new global variable ``pyfits.EXTENSION_NAME_CASE_SENSITIVE`` was added.
This serves as a replacement for ``pyfits.setExtensionNameCaseSensitive``
which is not deprecated and may be removed in a future version. To enable
case-sensitivity of extension names (i.e. treat 'sci' as distict from 'SCI')
set ``pyfits.EXTENSION_NAME_CASE_SENSITIVE = True``. The default is
``False``. (r1139)
- A new global configuration variable ``pyfits.STRIP_HEADER_WHITESPACE`` was
added. By default, if a string value in a header contains trailing
whitespace, that whitespace is automatically removed when the value is read.
Now if you set ``pyfits.STRIP_HEADER_WHITESPACE = False`` all whitespace is
preserved. (#146)
- The old ``classExtensions`` extension mechanism (which was deprecated in
PyFITS 3.0) is removed outright. To our knowledge it was no longer used
anywhere. (r1309)
- Warning messages from PyFITS issued through the Python warnings API are now
output to stderr instead of stdout, as is the default. PyFITS no longer
modifies the default behavior of the warnings module with respect to which
stream it outputs to. (r1319)
- The ``checksum`` argument to ``pyfits.open()`` now accepts a value of
'remove', which causes any existing CHECKSUM/DATASUM keywords to be ignored,
and removed when the file is saved.
New Features
^^^^^^^^^^^^
- Added support for the proposed "FITS" extension HDU type. See
http://listmgr.cv.nrao.edu/pipermail/fitsbits/2002-April/001094.html. FITS
HDUs contain an entire FITS file embedded in their data section. `FitsHDU`
objects work like other HDU types in PyFITS. Their ``.data`` attribute
returns the raw data array. However, they have a special ``.hdulist``
attribute which processes the data as a FITS file and returns it as an
in-memory HDUList object. FitsHDU objects also support a
``FitsHDU.fromhdulist()`` classmethod which returns a new `FitsHDU` object
that embeds the supplied HDUList. (#80)
- Added a new ``.is_image`` attribute on HDU objects, which is True if the HDU
data is an 'image' as opposed to a table or something else. Here the
meaning of 'image' is fairly loose, and mostly just means a Primary or Image
extension HDU, or possibly a compressed image HDU (#71)
- Added an ``HDUList.fromstring`` classmethod which can parse a FITS file
already in memory and instantiate and ``HDUList`` object from it. This
could be useful for integrating PyFITS with other libraries that work on
FITS file, such as CFITSIO. It may also be useful in streaming
applications. The name is a slight misnomer, in that it actually accepts
any Python object that implements the buffer interface, which includes
``bytes``, ``bytearray``, ``memoryview``, ``numpy.ndarray``, etc. (#90)
- Added a new ``pyfits.diff`` module which contains facilities for comparing
FITS files. One can use the ``pyfits.diff.FITSDiff`` class to compare two
FITS files in their entirety. There is also a ``pyfits.diff.HeaderDiff``
class for just comparing two FITS headers, and other similar interfaces.
See the PyFITS Documentation for more details on this interface. The
``pyfits.diff`` module powers the new ``fitsdiff`` program installed with
PyFITS. After installing PyFITS, run ``fitsdiff --help`` for usage details.
- ``pyfits.open()`` now accepts a ``scale_back`` argument. If set to
``True``, this automatically scales the data using the original BZERO and
BSCALE parameters the file had when it was first opened, if any, as well as
the original BITPIX. For example, if the original BITPIX were 16, this
would be equivalent to calling ``hdu.scale('int16', 'old')`` just before
calling ``flush()`` or ``close()`` on the file. This option applies to all
HDUs in the file. (#120)
- ``pyfits.open()`` now accepts a ``save_backup`` argument. If set to
``True``, this automatically saves a backup of the original file before
flushing any changes to it (this of course only applies to update and append
mode). This may be especially useful when working with scaled image data.
(#121)
Changes in Behavior
^^^^^^^^^^^^^^^^^^^
- Warnings from PyFITS are not output to stderr by default, instead of stdout
as it has been for some time. This is contrary to most users' expectations
and makes it more difficult for them to separate output from PyFITS from the
desired output for their scripts. (r1319)
Bug Fixes
^^^^^^^^^
- Fixed ``pyfits.tcreate()`` (now ``pyfits.tableload()``) to be more robust
when encountering blank lines in a column definition file (#14)
- Fixed a fairly rare crash that could occur in the handling of CONTINUE cards
when using Numpy 1.4 or lower (though 1.4 is the oldest version supported by
PyFITS). (r1330)
- Fixed ``_BaseHDU.fromstring`` to actually correctly instantiate an HDU
object from a string/buffer containing the header and data of that HDU.
This allowed for the implementation of ``HDUList.fromstring`` described
above. (#90)
- Fixed a rare corner case where, in some use cases, (mildly, recoverably)
malformatted float values in headers were not properly returned as floats.
(#137)
- Fixed a corollary to the previous bug where float values with a leading zero
before the decimal point had the leading zero unnecessarily removed when
saving changes to the file (eg. "0.001" would be written back as ".001" even
if no changes were otherwise made to the file). (#137)
- When opening a file containing CHECKSUM and/or DATASUM keywords in update
mode, the CHECKSUM/DATASUM are updated and preserved even if the file was
opened with checksum=False. This change in behavior prevents checksums from
being unintentionally removed. (#148)
- Fixed a bug where ``ImageHDU.scale(option='old')`` wasn't working at all--it
was not restoring the image to its original BSCALE and BZERO values. (#162)
- Fixed a bug when writing out files containing zero-width table columns,
where the TFIELDS keyword would be updated incorrectly, leaving the table
largely unreadable. This fix will be backported to the 3.0.x series in
version 3.0.10. (#174)
3.0.9 (2012-08-06)
------------------
This is a bug fix release for the 3.0.x series.
Bug Fixes
^^^^^^^^^
- Fixed ``Header.values()``/``Header.itervalues()`` and ``Header.items()``/
``Header.iteritems()`` to correctly return the different values for
duplicate keywords (particularly commentary keywords like HISTORY and
COMMENT). This makes the old Header implementation slightly more compatible
with the new implementation in PyFITS 3.1. (#127)
.. note::
This fix did not change the existing behavior from earlier PyFITS
versions where ``Header.keys()`` returns all keywords in the header with
duplicates removed. PyFITS 3.1 changes that behavior, so that
``Header.keys()`` includes duplicates.
- Fixed a bug where ``ImageHDU.scale(option='old')`` wasn't working at all--it
was not restoring the image to its original BSCALE and BZERO values. (#162)
- Fixed a bug where opening a file containing compressed image HDUs in
'update' mode and then immediately closing it without making any changes
caused the file to be rewritten unncessarily. (#167)
- Fixed two memory leaks that could occur when writing compressed image data,
or in some cases when opening files containing compressed image HDUs in
'update' mode. (#168)
3.0.8 (2012-06-04)
------------------
Changes in Behavior
^^^^^^^^^^^^^^^^^^^
- Prior to this release, image data sections did not work with scaled
data--that is, images with non-trivial BSCALE and/or BZERO values.
Previously, in order to read such images in sections, it was necessary to
manually apply the BSCALE+BZERO to each section. It's worth noting that
sections *did* support pseudo-unsigned ints (flakily). This change just
extends that support for general BSCALE+BZERO values.
Bug Fixes
^^^^^^^^^
- Fixed a bug that prevented updates to values in boolean table columns from
being saved. This turned out to be a symptom of a deeper problem that could
prevent other table updates from being saved as well. (#139)
- Fixed a corner case in which a keyword comment ending with the string "END"
could, in some circumstances, cause headers (and the rest of the file after
that point) to be misread. (#142)
- Fixed support for scaled image data and psuedo-unsigned ints in image data
sections (``hdu.section``). Previously this was not supported at all. At
some point support was supposedly added, but it was buggy and incomplete.
Now the feature seems to work much better. (#143)
- Fixed the documentation to point out that image data sections *do* support
non-contiguous slices (and have for a long time). The documentation was
never updated to reflect this, and misinformed users that only contiguous
slices were supported, leading to some confusion. (#144)
- Fixed a bug where creating an ``HDUList`` object containing multiple PRIMARY
HDUs caused an infinite recursion when validating the object prior to
writing to a file. (#145)
- Fixed a rare but serious case where saving an update to a file that
previously had a CHECKSUM and/or DATASUM keyword, but removed the checksum
in saving, could cause the file to be slightly corrupted and unreadable.
(#147)
- Fixed problems with reading "non-standard" FITS files with primary headers
containing SIMPLE = F. PyFITS has never made many guarantees as to how such
files are handled. But it should at least be possible to read their
headers, and the data if possible. Saving changes to such a file should not
try to prepend an unwanted valid PRIMARY HDU. (#157)
- Fixed a bug where opening an image with ``disable_image_compression = True``
caused compression to be disabled for all subsequent ``pyfits.open()`` calls.
(r1651)
3.0.7 (2012-04-10)
------------------
Changes in Behavior
^^^^^^^^^^^^^^^^^^^
- Slices of GroupData objects now return new GroupData objects instead of
extended multi-row _Group objects. This is analogous to how PyFITS 3.0 fixed
FITS_rec slicing, and should have been fixed for GroupData at the same time.
The old behavior caused bugs where functions internal to Numpy expected that
slicing an ndarray would return a new ndarray. As this is a rare usecase
with a rare feature most users are unlikely to be affected by this change.
- The previously internal _Group object for representing individual group
records in a GroupData object are renamed Group and are now a public
interface. However, there's almost no good reason to create Group objects
directly, so it shouldn't be considered a "new feature".
- An annoyance from PyFITS 3.0.6 was fixed, where the value of the EXTEND
keyword was always being set to F if there are not actually any extension
HDUs. It was unnecessary to modify this value.
Bug Fixes
^^^^^^^^^
- Fixed GroupData objects to return new GroupData objects when sliced instead
of _Group record objects. See "Changes in behavior" above for more details.
- Fixed slicing of Group objects--previously it was not possible to slice
slice them at all.
- Made it possible to assign `np.bool_` objects as header values. (#123)
- Fixed overly strict handling of the EXTEND keyword; see "Changes in
behavior" above. (#124)
- Fixed many cases where an HDU's header would be marked as "modified" by
PyFITS and rewritten, even when no changes to the header are necessary.
(#125)
- Fixed a bug where the values of the PTYPEn keywords in a random groups HDU
were forced to be all lower-case when saving the file. (#130)
- Removed an unnecessary inline import in `ExtensionHDU.__setattr__` that was
causing some slowdown when opening files containing a large number of
extensions, plus a few other small (but not insignficant) performance
improvements thanks to Julian Taylor. (#133)
- Fixed a regression where header blocks containing invalid end-of-header
padding (i.e. null bytes instead of spaces) couldn't be parsed by PyFITS.
Such headers can be parsed again, but a warning is raised, as such headers
are not valid FITS. (#136)
- Fixed a memory leak where table data in random groups HDUs weren't being
garbage collected. (#138)
3.0.6 (2012-02-29)
------------------
Highlights
^^^^^^^^^^
The main reason for this release is to fix an issue that was introduced in
PyFITS 3.0.5 where merely opening a file containing scaled data (that is, with
non-trivial BSCALE and BZERO keywords) in 'update' mode would cause the data
to be automatically rescaled--possibly converting the data from ints to
floats--as soon as the file is closed, even if the application did not touch
the data. Now PyFITS will only rescale the data in an extension when the data
is actually accessed by the application. So opening a file in 'update' mode
in order to modify the header or append new extensions will not cause any
change to the data in existing extensions.
This release also fixes a few Windows-specific bugs found through more
extensive Windows testing, and other miscellaneous bugs.
Bug Fixes
^^^^^^^^^
- More accurate error messages when opening files containing invalid header
cards. (#109)
- Fixed a possible reference cycle/memory leak that was caught through more
extensive testing on Windows. (#112)
- Fixed 'ostream' mode to open the underlying file in 'wb' mode instead of 'w'
mode. (#112)
- Fixed a Windows-only issue where trying to save updates to a resized FITS
file could result in a crash due to there being open mmaps on that file.
(#112)
- Fixed a crash when trying to create a FITS table (i.e. with new_table())
from a Numpy array containing bool fields. (#113)
- Fixed a bug where manually initializing an ``HDUList`` with a list of of
HDUs wouldn't set the correct EXTEND keyword value on the primary HDU.
(#114)
- Fixed a crash that could occur when trying to deepcopy a Header in Python <
2.7. (#115)
- Fixed an issue where merely opening a scaled image in 'update' mode would
cause the data to be converted to floats when the file is closed. (#119)
3.0.5 (2012-01-30)
------------------
- Fixed a crash that could occur when accessing image sections of files
opened with memmap=True. (r1211)
- Fixed the inconsistency in the behavior of files opened in 'readonly' mode
when memmap=True vs. when memmap=False. In the latter case, although
changes to array data were not saved to disk, it was possible to update the
array data in memory. On the other hand with memmap=True, 'readonly' mode
prevented even in-memory modification to the data. This is what
'copyonwrite' mode was for, but difference in behavior was confusing. Now
'readonly' is equivalent to 'copyonwrite' when using memmap. If the old
behavior of denying changes to the array data is necessary, a new
'denywrite' mode may be used, though it is only applicable to files opened
with memmap. (r1275)
- Fixed an issue where files opened with memmap=True would return image data
as a raw numpy.memmap object, which can cause some unexpected
behaviors--instead memmap object is viewed as a numpy.ndarray. (r1285)
- Fixed an issue in Python 3 where a workaround for a bug in Numpy on Python 3
interacted badly with some other software, namely to vo.table package (and
possibly others). (r1320, r1337, and #110)
- Fixed buggy behavior in the handling of SIGINTs (i.e. Ctrl-C keyboard
interrupts) while flushing changes to a FITS file. PyFITS already prevented
SIGINTs from causing an incomplete flush, but did not clean up the signal
handlers properly afterwards, or reraise the keyboard interrupt once the
flush was complete. (r1321)
- Fixed a crash that could occur in Python 3 when opening files with checksum
checking enabled. (r1336)
- Fixed a small bug that could cause a crash in the `StreamingHDU` interface
when using Numpy below version 1.5.
- Fixed a crash that could occur when creating a new `CompImageHDU` from an
array of big-endian data. (#104)
- Fixed a crash when opening a file with extra zero padding at the end.
Though FITS files should not have such padding, it's not explictly forbidden
by the format either, and PyFITS shouldn't stumble over it. (#106)
- Fixed a major slowdown in opening tables containing large columns of string
values. (#111)
3.0.4 (2011-11-22)
------------------
- Fixed a crash when writing HCOMPRESS compressed images that could happen on
Python 2.5 and 2.6. (r1217)
- Fixed a crash when slicing an table in a file opened in 'readonly' mode with
memmap=True. (r1230)
- Writing changes to a file or writing to a new file verifies the output in
'fix' mode by default instead of 'exception'--that is, PyFITS will
automatically fix common FITS format errors rather than raising an
exception. (r1243)
- Fixed a bug where convenience functions such as getval() and getheader()
crashed when specifying just 'PRIMARY' as the extension to use (r1263).
- Fixed a bug that prevented passing keyword arguments (beyond the standard
data and header arguments) as positional arguments to the constructors of
extension HDU classes.
- Fixed some tests that were failing on Windows--in this case the tests
themselves failed to close some temp files and Windows refused to delete them
while there were still open handles on them. (r1295)
- Fixed an issue with floating point formatting in header values on Python 2.5
for Windows (and possibly other platforms). The exponent was zero-padded to
3 digits; although the FITS standard makes no specification on this, the
formatting is now normalized to always pad the exponent to two digits.
(r1295)
- Fixed a bug where long commentary cards (such as HISTORY and COMMENT) were
broken into multiple CONTINUE cards. However, commentary cards are not
expected to be found in CONTINUE cards. Instead these long cards are broken
into multiple commentary cards. (#97)
- GZIP/ZIP-compressed FITS files can be detected and opened regardless of
their filename extension. (#99)
- Fixed a serious bug where opening scaled images in 'update' mode and then
closing the file without touching the data would cause the file to be
corrupted. (#101)
3.0.3 (2011-10-05)
------------------
- Fixed several small bugs involving corner cases in record-valued keyword
cards (#70)
- In some cases HDU creation failed if the first keyword value in the header
was not a string value (#89)
- Fixed a crash when trying to compute the HDU checksum when the data array
contains an odd number of bytes (#91)
- Disabled an unnecessary warning that was displayed on opening compressed
HDUs with disable_image_compression = True (#92)
- Fixed a typo in code for handling HCOMPRESS compressed images.
3.0.2 (2011-09-23)
------------------
- The ``BinTableHDU.tcreate`` method and by extension the ``pyfits.tcreate``
function don't get tripped up by blank lines anymore (#14)
- The presence, value, and position of the EXTEND keyword in Primary HDUs is
verified when reading/writing a FITS file (#32)
- Improved documentation (in warning messages as well as in the handbook) that
PyFITS uses zero-based indexing (as one would expect for C/Python code, but
contrary to the PyFITS standard which was written with FORTRAN in mind)
(#68)
- Fixed a bug where updating a header card comment could cause the value to be
lost if it had not already been read from the card image string.
- Fixed a related bug where changes made directly to Card object in a header
(i.e. assigning directly to card.value or card.comment) would not propagate
when flushing changes to the file (#69) [Note: This and the bug above it
were originally reported as being fixed in version 3.0.1, but the fix was
never included in the release.]
- Improved file handling, particularly in Python 3 which had a few small file
I/O-related bugs (#76)
- Fixed a bug where updating a FITS file would sometimes cause it to lose its
original file permissions (#79)
- Fixed the handling of TDIMn keywords; 3.0 added support for them, but got
the axis order backards (they were treated as though they were row-major)
(#82)
- Fixed a crash when a FITS file containing scaled data is opened and
immediately written to a new file without explicitly viewing the data first
(#84)
- Fixed a bug where creating a table with columns named either 'names' or
'formats' resulted in an infinite recursion (#86)
3.0.1 (2011-09-12)
------------------
- Fixed a bug where updating a header card comment could cause the value to be
lost if it had not already been read from the card image string.
- Changed ``_TableBaseHDU.data`` so that if the data contain an empty table a
``FITS_rec`` object with zero rows is returned rather than ``None``.
- The ``.key`` attribute of ``RecordValuedKeywordCards`` now returns the full
keyword+field-specifier value, instead of just the plain keyword (#46)
- Fixed a related bug where changes made directly to Card object in a header
(i.e. assigning directly to card.value or card.comment) would not propagate
when flushing changes to the file (#69)
- Fixed a bug where writing a table with zero rows could fail in some cases
(#72)
- Miscellanous small bug fixes that were causing some tests to fail,
particularly on Python 3 (#74, #75)
- Fixed a bug where creating a table column from an array in non-native byte
order would not preserve the byte order, thus interpreting the column array
using the wrong byte order (#77)
3.0.0 (2011-08-23)
--------------------
- Contains major changes, bumping the version to 3.0
- Large amounts of refactoring and reorganization of the code; tried to
preserve public API backwards-compatibility with older versions (private API
has many changes and is not guaranteed to be backwards-compatible). There
are a few small public API changes to be aware of:
* The pyfits.rec module has been removed completely. If your version of
numpy does not have the numpy.core.records module it is too old to be used
with PyFITS.
* The ``Header.ascardlist()`` method is deprecated--use the ``.ascard``
attribute instead.
* ``Card`` instances have a new ``.cardimage`` attribute that should be used
rather than ``.ascardimage()``, which may become deprecated.
* The ``Card.fromstring()`` method is now a classmethod. It returns a new
``Card`` instance rather than modifying an existing instance.
* The ``req_cards()`` method on HDU instances has changed: The ``pos``
argument is not longer a string. It is either an integer value (meaning
the card's position must match that value) or it can be a function that
takes the card's position as it's argument, and returns True if the
position is valid. Likewise, the ``test`` argument no longer takes a
string, but instead a function that validates the card's value and returns
True or False.
* The ``get_coldefs()`` method of table HDUs is deprecated. Use the
``.columns`` attribute instead.
* The ``ColDefs.data`` attribute is deprecated--use ``ColDefs.columns``
instead (though in general you shouldn't mess with it directly--it might
become internal at some point).
* ``FITS_record`` objects take ``start`` and ``end`` as arguments instead of
``startColumn`` and ``endColumn`` (these are rarely created manually, so
it's unlikely that this change will affect anyone).
* ``BinTableHDU.tcreate()`` is now a classmethod, and returns a new
``BinTableHDU`` instance.
* Use ``ExtensionHDU`` and ``NonstandardExtHDU`` for making new extension HDU
classes. They are now public interfaces, wheres previously they were
private and prefixed with underscores.
* Possibly others--please report if you find any changes that cause
difficulties.
- Calls to deprecated functions will display a Deprecation warning. However,
in Python 2.7 and up Deprecation warnings are ignored by default, so run
Python with the `-Wd` option to see if you're using any deprecated
functions. If we get close to actually removing any functions, we might
make the Deprecation warnings display by default.
- Added basic Python 3 support
- Added support for multi-dimensional columns in tables as specified by the
TDIMn keywords (#47)
- Fixed a major memory leak that occurred when creating new tables with the
``new_table()`` function (#49)
be padded with zero-bytes) vs ASCII tables (where strings are padded with
spaces) (#15)
- Fixed a bug in which the case of Random Access Group parameters names was not
preserved when writing (#41)
- Added support for binary table fields with zero width (#42)
- Added support for wider integer types in ASCII tables; although this is non-
standard, some GEIS images require it (#45)
- Fixed a bug that caused the index_of() method of HDULists to crash when the
HDUList object is created from scratch (#48)
- Fixed the behavior of string padding in binary tables (where strings should
be padded with nulls instead of spaces)
- Fixed a rare issue that caused excessive memory usage when computing
checksums using a non-standard block size (see r818)
- Add support for forced uint data in image sections (#53)
- Fixed an issue where variable-length array columns were not extended when
creating a new table with more rows than the original (#54)
- Fixed tuple and list-based indexing of FITS_rec objects (#55)
- Fixed an issue where BZERO and BSCALE keywords were appended to headers in
the wrong location (#56)
- ``FITS_record`` objects (table rows) have full slicing support, including
stepping, etc. (#59)
- Fixed a bug where updating multiple files simultaneously (such as when
running parallel processes) could lead to a race condition with mktemp()
(#61)
- Fixed a bug where compressed image headers were not in the order expected by
the funpack utility (#62)
jperkin
pushed a commit
that referenced
this pull request
Mar 14, 2014
Changelog since 3.3.1 3.4.3 - 11/30/2012 ------------------ - Reverted squeue changes intended for Nagios 4 - Reapplied all patches from 3.4.2 release - Applied fix for pagination and sorting on status.cgi #381 (Phil Randal) 3.4.2 - 11/09/2012 ------------------ FIXES * Fixed issue where deleting a downtime could cause Nagios to crash (Eric Stanley) * Corrected logic so that end times for flexible downtimes are calculated from the dow ntime start rather than the current time in the case where Nagios is restarted (Eric S tanley) * Fixed issue introduced by fix for bug #124 where flexible downtimes are not taken in to account on Nagios restart. (Scott Wilkerson, Eric Stanley) * Fixed bug #247: If a service reports no performance data, the perfdata log file has no line indicating the test. (omnikron@free.fr) * Fixed link for unhandled unreachable host problems on tactical overview page (Rudolf Cejka) * Fixed bug #345 with wild card searches not paging properly on status.cgi (Phil Randa l) * Fixed bug #343 on status.cgi where Service Group Summary can potentially show wrong totals (Mark Ziesemer) * Fixed memory leaks on SIGHUP (Carlos Velasco) 3.4.1 - 05/11/2012 ------------------ FIXES * Double quotes in check_command definition break functionality (#332, reverts #86) 3.4.0 - 05/04/2012 ------------------ ENHANCEMENTS * Added service_check_timeout_state configuration variable (Bill McGonigle) * Permanently remove sleep on run_event == FALSE in main loop (Max <perldork@webwizard design.com>) * Reduce notification load by moving notification viability check into notification li st creation (Opsview Team) * Added code to apply allow_empty_hostgroup_assignment flag to host and service depend encies (Daniel Wittenberg) * Users can now see hostgroups and servicegroups that contain at least one host or ser vice they are authorized for, instead of having to be authorized for them all (Ethan G alstad) * RSS feed boxes fallback if an error occurs (Ethan Galstad) * RSS feeds no longer block main page load (Mike Guthrie) FIXES * Fix $NOTIFICATIONRECIPIENTS$ macro to contain all contacts assigned to host|service, not only notified contacts (Bug #98 Matt Harrington) * Scheduled Downtime Notifications Resent On Nagios Restart/reload (Bug #124 - ricardo ) * NOTIFICATIONTYPE MACRO never became CUSTOM (Bug #168 - Alexey Dvoryanchikov) * Plugged minor memory leaks in notification logic
jperkin
pushed a commit
that referenced
this pull request
Mar 14, 2014
Release 3.1.1 - 2013/12/29 -------------------------- Improvements ^^^^^^^^^^^^ * [deb] Refined Groonga packages for Debian policy. [groonga-dev,01930] [Suggested by Hideki Yamane] * [deb] Dropped Debian 6.0 (squeeze) support. * [deb] Dropped Ubuntu 10.04 (lucid) support. * Supported :doc:`/reference/functions/geo_in_rectangle` in the whole world. * Supported error report when failed to casting invalid value of geo point type. * Exported some macros which is used for accessing pseudo column names. [groonga-dev,1999] [Suggested by whombx] * [doc] Refined drilldown documentation. [Reported by @Yahppo] * Supported :doc:`/reference/functions/between` function which is used for filtering the column value in specific range. * [doc] Updated Travis CI envrinment information. [Patch by cosmo0920] * [rpm][fedora] Dropped Fedora 19. * [rpm][fedora] Supported Fedora 20. * [doc] Updated "Groonga" notation. [Patch by cosmo0920] [GitHub#122, #123, #124, #125, #125, #126, #127, #128, #129, #130, #131, #131, #132, #133, #134] Fixes ^^^^^ * [munin] Fixed the wrong port number which is specified for GQTP. * [geo_in_circle] Fixed a bug that if you specify "LONGITUDExLATITUDE" as the 3rd argument of :doc:`/reference/functions/geo_in_circle`, Groonga crashes. Thanks ^^^^^^ * Hideki Yamane * whombx * @yappo * cosmo0920
jperkin
pushed a commit
that referenced
this pull request
Mar 14, 2014
----- 2.0.2 ----- * Fix NameError during installation with Python implementations (e.g. Jython) not containing parser module. * Fix NameError in ``sdist:re_finder``. ----- 2.0.1 ----- * Issue #124: Fixed error in list detection in upload_docs. --- 2.0 --- * Issue #121: Exempt lib2to3 pickled grammars from DirectorySandbox. * Issue #41: Dropped support for Python 2.4 and Python 2.5. Clients requiring setuptools for those versions of Python should use setuptools 1.x. * Removed ``setuptools.command.easy_install.HAS_USER_SITE``. Clients expecting this boolean variable should use ``site.ENABLE_USER_SITE`` instead. * Removed ``pkg_resources.ImpWrapper``. Clients that expected this class should use ``pkgutil.ImpImporter`` instead. ----- 1.4.2 ----- * Issue #116: Correct TypeError when reading a local package index on Python 3. ----- 1.4.1 ----- * Issue #114: Use ``sys.getfilesystemencoding`` for decoding config in ``bdist_wininst`` distributions. * Issue #105 and Issue #113: Establish a more robust technique for determining the terminal encoding:: 1. Try ``getpreferredencoding`` 2. If that returns US_ASCII or None, try the encoding from ``getdefaultlocale``. If that encoding was a "fallback" because Python could not figure it out from the environment or OS, encoding remains unresolved. 3. If the encoding is resolved, then make sure Python actually implements the encoding. 4. On the event of an error or unknown codec, revert to fallbacks (UTF-8 on Darwin, ASCII on everything else). 5. On the encoding is 'mac-roman' on Darwin, use UTF-8 as 'mac-roman' was a bug on older Python releases. On a side note, it would seem that the encoding only matters for when SVN does not yet support ``--xml`` and when getting repository and svn version numbers. The ``--xml`` technique should yield UTF-8 according to some messages on the SVN mailing lists. So if the version numbers are always 7-bit ASCII clean, it may be best to only support the file parsing methods for legacy SVN releases and support for SVN without the subprocess command would simple go away as support for the older SVNs does. --- 1.4 --- * Issue #27: ``easy_install`` will now use credentials from .pypirc if present for connecting to the package index. * Pull Request #21: Omit unwanted newlines in ``package_index._encode_auth`` when the username/password pair length indicates wrapping. ----- 1.3.2 ----- * Issue #99: Fix filename encoding issues in SVN support. ----- 1.3.1 ----- * Remove exuberant warning in SVN support when SVN is not used.
jperkin
pushed a commit
that referenced
this pull request
Mar 14, 2014
FITS (Flexible Image Transport System) is a data format most used in astronomy.
PyFITS is a Python module for reading, writing, and manipulating FITS files.
The module uses Python's object-oriented features to provide quick, easy, and
efficient access to FITS files. The use of Python's array syntax enables
immediate access to any FITS extension, header cards, or data items.
Changes to 2.4.0 (in py-pyfits):
Changelog
===========
3.2 (2013-11-26)
----------------
Highlights
^^^^^^^^^^
- Rewrote CFITSIO-based backend for handling tile compression of FITS files.
It now uses a standard CFITSIO instead of heavily modified pieces of CFITSIO
as before. PyFITS ships with its own copy of CFITSIO v3.35 which supports
the latest version of the Tiled Image Convention (v2.3), but system
packagers may choose instead to strip this out in favor of a
system-installed version of CFITSIO. Earlier versions may work, but nothing
earlier than 3.28 has been tested yet. (#169)
- Added support for reading and writing tables using the Q format for columns.
The Q format is identical to the P format (variable-length arrays) except
that it uses 64-bit integers for the data descriptors, allowing more than
4 GB of variable-length array data in a single table. (#160)
- Added initial support for table columns containing pseudo-unsigned integers.
This is currently enabled by using the ``uint=True`` option when opening
files; any table columns with the correct BZERO value will be interpreted
and returned as arrays of unsigned integers.
- Some refactoring of the table and ``FITS_rec`` modules in order to better
separate the details of the FITS binary and ASCII table data structures from
the HDU data structures that encapsulate them. Most of these changes should
not be apparent to users (but see API Changes below).
API Changes
^^^^^^^^^^^
- Assigning to values in ``ColDefs.names``, ``ColDefs.formats``,
``ColDefs.nulls`` and other attributes of ``ColDefs`` instances that return
lists of column properties is no longer supported. Assigning to those lists
will no longer update the corresponding columns. Instead, please just
modify the ``Column`` instances directly (``Column.name``, ``Column.null``,
etc.)
- The ``pyfits.new_table`` function is marked "pending deprecation". This
does not mean it will be removed outright or that its functionality has
changed. It will likely be replaced in the future for a function with
similar, if not subtly different functionality. A better, if not slightly
more verbose approach is to use ``pyfits.FITS_rec.from_columns`` to create
a new ``FITS_rec`` table--this has the same interface as
``pyfits.new_table``. The difference is that it returns a plan ``FITS_rec``
array, and not an HDU instance. This ``FITS_rec`` object can then be used
as the data argument in the constructors for ``BinTableHDU`` (for binary
tables) or ``TableHDU`` (for ASCII tables). This is analogous to creating
an ``ImageHDU`` by passing in an image array.
``pyfits.FITS_rec.from_columns`` is just a simpler way of creating a
FITS-compatible recarray from a FITS column specification.
- The ``updateHeader``, ``updateHeaderData``, and ``updateCompressedData``
methods of the ``CompDataHDU`` class are pending deprecation and moved to
internal methods. The operation of these methods depended too much on
internal state to be used safely by users; instead they are invoked
automatically in the appropriate places when reading/writing compressed image
HDUs.
- The ``CompDataHDU.compData`` attribute is pending deprecation in favor of
the clearer and more PEP-8 compatible ``CompDataHDU.compressed_data``.
- The constructor for ``CompDataHDU`` has been changed to accept new keyword
arguments. The new keyword arguments are essentially the same, but are in
underscore_separated format rather than camelCase format. The old arguments
are still pending deprecation.
- The internal attributes of HDU classes ``_hdrLoc``, ``_datLoc``, and
``_datSpan`` have been replaced with ``_header_offset``, ``_data_offset``,
and ``_data_size`` respectively. The old attribute names are still pending
deprecation. This should only be of interest to advanced users who have
created their own HDU subclasses.
- The following previously deprecated functions and methods have been removed
entirely: ``createCard``, ``createCardFromString``, ``upperKey``,
``ColDefs.data``, ``setExtensionNameCaseSensitive``, ``_File.getfile``,
``_TableBaseHDU.get_coldefs``, ``Header.has_key``, ``Header.ascardlist``.
If you run your code with a previous version of PyFITS (>= 3.0, < 3.2) with
the ``python -Wd`` argument, warnings for all deprecated interfaces still in
use will be displayed.
- Interfaces that were pending deprecation are now fully deprecated. These
include: ``create_card``, ``create_card_from_string``, ``upper_key``,
``Header.get_history``, and ``Header.get_comment``.
- The ``.name`` attribute on HDUs is now directly tied to the HDU's header, so
that if ``.header['EXTNAME']`` changes so does ``.name`` and vice-versa.
- The ``pyfits.file.PYTHON_MODES`` constant dict was renamed to
``pyfits.file.PYFITS_MODES`` which better reflects its purpose. This is
rarely used by client code, however. Support for the old name will be
removed by PyFITS 3.4.
Other Changes and Additions
^^^^^^^^^^^^^^^^^^^^^^^^^^^
- The new compression code also adds support for the ZQUANTIZ and ZDITHER0
keywords added in more recent versions of this FITS Tile Compression spec.
This includes support for lossless compression with GZIP. (#198) By default
no dithering is used, but the ``SUBTRACTIVE_DITHER_1`` and
``SUBTRACTIVE_DITHER_2`` methods can be enabled by passing the correct
constants to the ``quantize_method`` argument to the ``CompImageHDU``
constuctor. A seed can be manually specified, or automatically generated
using either the system clock or checksum-based methods via the
``dither_seed`` argument. See the documentation for ``CompImageHDU`` for
more details. (#198) (spacetelescope/PYFITS#32)
- Images compressed with the Tile Compression standard can now be larger than
4 GB through support of the Q format. (#159)
- All HDUs now have a ``.ver`` ``.level`` attribute that returns the value of
the EXTVAL and EXTLEVEL keywords from that HDU's header, if the exist. This
was added for consistency with the ``.name`` attribute which returns the
EXTNAME value from the header.
- Then ``Column`` and ``ColDefs`` classes have new ``.dtype`` attributes
which give the Numpy dtype for the column data in the first case, and the
full Numpy compound dtype for each table row in the latter case.
- There was an issue where new tables created defaulted the values in all
string columns to '0.0'. Now string columns are filled with empty strings
by default--this seems a less surprising default, but it may cause
differences with tables created with older versions of PyFITS.
- Improved round-tripping and preservation of manually assigned column
attributes (``TNULLn``, ``TSCALn``, etc.) in table HDU headers.
(astropy/astropy#996)
Bug Fixes
^^^^^^^^^
- Binary tables containing compressed images may, optionally, contain other
columns unrelated to the tile compression convention. Although this is an
uncommon use case, it is permitted by the standard. (#159)
- Reworked some of the file I/O routines to allow simpler, more consistent
mapping between OS-level file modes ('rb', 'wb', 'ab', etc.) and the more
"PyFITS-specific" modes used by PyFITS like "readonly" and "update".
That is, if reading a FITS file from an open file object, it doesn't matter
as much what "mode" it was opened in so long as it has the right
capabilities (read/write/etc.) Also works around bugs in the Python io
module in 2.6+ with regard to file modes. (spacetelescope/PyFITS#33)
- Fixed an obscure issue that can occur on systems that don't have flush to
memory-mapped files implemented (namely GNU Hurd). (astropy/astropy#968)
3.1.3 (2013-11-26)
------------------
- Disallowed assigning NaN and Inf floating point values as header values,
since the FITS standard does not define a way to represent them in. Because
this is undefined, the previous behavior did not make sense and produced
invalid FITS files. (spacetelescope/PyFITS#11)
- Added a workaround for a bug in 64-bit OSX that could cause truncation when
writing files greater than 2^32 bytes in size. (spacetelescope/PyFITS#28)
- Fixed a long-standing issue where writing binary tables did not correctly
write the TFORMn keywords for variable-length array columns (they ommitted
the max array length parameter of the format). This was thought fixed in
v3.1.2, but it was only fixed there for compressed image HDUs and not for
binary tables in general.
- Fixed an obscure issue that can occur on systems that don't have flush to
memory-mapped files implemented (namely GNU Hurd). (Backported from 3.2)
3.0.12 (2013-11-26)
-------------------
- Disallowed assigning NaN and Inf floating point values as header values,
since the FITS standard does not define a way to represent them in. Because
this is undefined, the previous behavior did not make sense and produced
invalid FITS files. (Backported from 3.1.3)
- Added a workaround for a bug in 64-bit OSX that could cause truncation when
writing files greater than 2^32 bytes in size. (Backported from 3.1.3)
- Fixed a long-standing issue where writing binary tables did not correctly
write the TFORMn keywords for variable-length array columns (they ommitted
the max array length parameter of the format). This was thought fixed in
v3.1.2, but it was only fixed there for compressed image HDUs and not for
binary tables in general. (Backported from 3.1.3)
- Fixed an obscure issue that can occur on systems that don't have flush to
memory-mapped files implemented (namely GNU Hurd). (Backported from 3.2)
3.1.2 (2013-04-22)
------------------
- When an error occurs opening a file in fitsdiff the exception message will
now at least mention which file had the error. (#168)
- Fixed support for opening gzipped FITS files by filename in a writeable mode
(PyFITS has supported writing to gzip files for some time now, but only
enabled it when GzipFile objects were passed to ``pyfits.open()`` due to
some legacy code preventing full gzip support. (#195)
- Added a more helpful error message in the case of malformatted FITS files
that contain non-float NULL values in an ASCII table but are missing the
required TNULLn keywords in the header. (#197)
- Fixed an (apparently long-standing) issue where writing compressed images
did not correctly write the TFORMn keywords for variable-length array
columns (they ommitted the max array length parameter of the format). (#199)
- Slightly refactored how tables containing variable-length array columns are
handled to add two improvements: Fixes an issue where accessing the data
after a call to the `pyfits.getdata` convenience function caused an
exception, and allows the VLA data to be read from an existing mmap of the
FITS file. (#200)
- Fixed a bug that could occur when opening a table containing
multi-dimensional columns (i.e. via the TDIMn keyword) and then writing it
out to a new file. (#201)
- Added use of the console_scripts entry point to install the fitsdiff and
fitscheck scripts, which if nothing else provides better Windows support.
The generated scripts now override the ones explicitly defined in the
scripts/ directory (which were just trivial stubs to begin with). (#202)
- Fixed a bug on Python 3 where attempting to open a non-existent file on
Python 3 caused a seemingly unrelated traceback. (#203)
- Fixed a bug in fitsdiff that reported two header keywords containing NaN
as value as different. (#204)
- Fixed an issue in the tests that caused some tests to fail if pyfits is
installed with read-only permissions. (#208)
- Fixed a bug where instantiating a ``BinTableHDU`` from a numpy array
containing boolean fields converted all the values to ``False``. (#215)
- Fixed an issue where passing an array of integers into the constructor of
``Column()`` when the column type is floats of the same byte width caused the
column array to become garbled. (#218)
- Fixed inconsistent behavior in creating CONTINUE cards from byte strings
versus unicode strings in Python 2--CONTINUE cards can now be created
properly from unicode strings (so long as they are convertable to ASCII).
(spacetelescope/PyFITS#1)
- Fixed a couple cases where creating a new table using TDIMn in some of the
columns could caused a crash. (spacetelescope/PyFITS#3)
- Fixed a bug in parsing HIERARCH keywords that do not have a space after
the first equals sign (before the value). (spacetelescope/PyFITS#5)
- Prevented extra leading whitespace on HIERARCH keywords from being treated
as part of the keyword. (spacetelescope/PyFITS#6)
- Fixed a bug where HIERARCH keywords containing lower-case letters was
mistakenly marked as invalid during header validation.
(spacetelescope/PyFITS#7)
- Fixed an issue that was ancillary to (spacetelescope/PyFITS#7) where the
``Header.index()`` method did not work correctly with HIERARCH keywords
containing lower-case letters.
3.0.11 (2013-04-17)
-------------------
- Fixed support for opening gzipped FITS files by filename in a writeable mode
(PyFITS has supported writing to gzip files for some time now, but only
enabled it when GzipFile objects were passed to ``pyfits.open()`` due to
some legacy code preventing full gzip support. Backported from 3.1.2. (#195)
- Added a more helpful error message in the case of malformatted FITS files
that contain non-float NULL values in an ASCII table but are missing the
required TNULLn keywords in the header. Backported from 3.1.2. (#197)
- Fixed an (apparently long-standing) issue where writing compressed images did
not correctly write the TFORMn keywords for variable-length array columns
(they ommitted the max array length parameter of the format). Backported from
3.1.2. (#199)
- Slightly refactored how tables containing variable-length array columns are
handled to add two improvements: Fixes an issue where accessing the data
after a call to the `pyfits.getdata` convenience function caused an
exception, and allows the VLA data to be read from an existing mmap of the
FITS file. Backported from 3.1.2. (#200)
- Fixed a bug that could occur when opening a table containing
multi-dimensional columns (i.e. via the TDIMn keyword) and then writing it
out to a new file. Backported from 3.1.2. (#201)
- Fixed a bug on Python 3 where attempting to open a non-existent file on
Python 3 caused a seemingly unrelated traceback. Backported from 3.1.2.
(#203)
- Fixed a bug in fitsdiff that reported two header keywords containing NaN
as value as different. Backported from 3.1.2. (#204)
- Fixed an issue in the tests that caused some tests to fail if pyfits is
installed with read-only permissions. Backported from 3.1.2. (#208)
- Fixed a bug where instantiating a ``BinTableHDU`` from a numpy array
containing boolean fields converted all the values to ``False``. Backported
from 3.1.2. (#215)
- Fixed an issue where passing an array of integers into the constructor of
``Column()`` when the column type is floats of the same byte width caused the
column array to become garbled. Backported from 3.1.2. (#218)
- Fixed a couple cases where creating a new table using TDIMn in some of the
columns could caused a crash. Backported from 3.1.2.
(spacetelescope/PyFITS#3)
3.1.1 (2013-01-02)
------------------
This is a bug fix release for the 3.1.x series.
Bug Fixes
^^^^^^^^^
- Improved handling of scaled images and pseudo-unsigned integer images in
compressed image HDUs. They now work more transparently like normal image
HDUs with support for the ``do_not_scale_image_data`` and ``uint`` options,
as well as ``scale_back`` and ``save_backup``. The ``.scale()`` method
works better too. (#88)
- Permits non-string values for the EXTNAME keyword when reading in a file,
rather than throwing an exception due to the malformatting. Added
verification for the format of the EXTNAME keyword when writing. (#96)
- Added support for EXTNAME and EXTVER in PRIMARY HDUs. That is, if EXTNAME
is specified in the header, it will also be reflected in the ``.name``
attribute and in ``pyfits.info()``. These keywords used to be verboten in
PRIMARY HDUs, but the latest version of the FITS standard allows them.
(#151)
- HCOMPRESS can again be used to compress data cubes (and higher-dimensional
arrays) so long as the tile size is effectively 2-dimensional. In fact,
PyFITS will automatically use compatible tile sizes even if they're not
explicitly specified. (#171)
- Added support for the optional ``endcard`` parameter in the
``Header.fromtextfile()`` and ``Header.totextfile()`` methods. Although
``endcard=False`` was a reasonable default assumption, there are still text
dumps of FITS headers that include the END card, so this should have been
more flexible. (#176)
- Fixed a crash when running fitsdiff on two empty (that is, zero row) tables.
(#178)
- Fixed an issue where opening files containing random groups HDUs in update
mode could cause an unnecessary rewrite of the file even if none of the
data is modified. (#179)
- Fixed a bug that could caused a deadlock in the filesystem on OSX if PyFITS
is used with Numpy 1.7 in some cases. (#180)
- Fixed a crash when generating diff reports from diffs using the
``ignore_comments`` options. (#181)
- Fixed some bugs with WCS Paper IV record-valued keyword cards:
- Cards that looked kind of like RVKCs but were not intended to be were
over-permissively treated as such--commentary keywords like COMMENT and
HISTORY were particularly affected. (#183)
- Looking up a card in a header by its standard FITS keyword only should
always return the raw value of that card. That way cards containing
values that happen to valid RVKCs but were not intended to be will still
be treated like normal cards. (#184)
- Looking up a RVKC in a header with only part of the field-specifier (for
example "DP1.AXIS" instead of "DP1.AXIS.1") was implicitly treated as a
wildcard lookup. (#184)
- Fixed a crash when diffing two FITS files where at least one contains a
compressed image HDU which was not recognized as an image instead of a
table. (#187)
- Fixed bugs in the backwards compatibility layer for the ``CardList.index``
and ``CardList.count`` methods. (#190)
- Improved ``__repr__`` and text file representation of cards with long values
that are split into CONTINUE cards. (#193)
- Fixed a crash when trying to assign a long (> 72 character) value to blank
('') keywords. This also changed how blank keywords are represented--there
are still exactly 8 spaces before any commentary content can begin; this
*may* affect the exact display of header cards that assumed there could be
fewer spaces in a blank keyword card before the content begins. However, the
current approach is more in line with the requirements of the FITS standard.
(#194)
3.0.10 (2013-01-02)
-------------------
- Improved handling of scaled images and pseudo-unsigned integer images in
compressed image HDUs. They now work more transparently like normal image
HDUs with support for the ``do_not_scale_image_data`` and ``uint`` options,
as well as ``scale_back`` and ``save_backup``. The ``.scale()`` method
works better too. Backported from 3.1.1. (#88)
- Permits non-string values for the EXTNAME keyword when reading in a file,
rather than throwing an exception due to the malformatting. Added
verification for the format of the EXTNAME keyword when writing. Backported
from 3.1.1. (#96)
- Added support for EXTNAME and EXTVER in PRIMARY HDUs. That is, if EXTNAME
is specified in the header, it will also be reflected in the ``.name``
attribute and in ``pyfits.info()``. These keywords used to be verbotten in
PRIMARY HDUs, but the latest version of the FITS standard allows them.
Backported from 3.1.1. (#151)
- HCOMPRESS can again be used to compress data cubes (and higher-dimensional
arrays) so long as the tile size is effectively 2-dimensional. In fact,
PyFITS will not automatically use compatible tile sizes even if they're not
explicitly specified. Backported from 3.1.1. (#171)
- Fixed a bug when writing out files containing zero-width table columns,
where the TFIELDS keyword would be updated incorrectly, leaving the table
largely unreadable. Backported from 3.1.0. (#174)
- Fixed an issue where opening files containing random groups HDUs in update
mode could cause an unnecessary rewrite of the file even if none of the
data is modified. Backported from 3.1.1. (#179)
- Fixed a bug that could caused a deadlock in the filesystem on OSX if PyFITS
is used with Numpy 1.7 in some cases. Backported from 3.1.1. (#180)
3.1 (2012-08-08)
----------------
Highlights
^^^^^^^^^^
- The ``Header`` object has been significantly reworked, and ``CardList``
objects are now deprecated (their functionality folded into the ``Header``
class). See API Changes below for more details.
- Memory maps are now used by default to access HDU data. See API Changes
below for more details.
- Now includes a new version of the ``fitsdiff`` program for comparing two
FITS files, and a new FITS comparison API used by ``fitsdiff``. See New
Features below.
API Changes
^^^^^^^^^^^
- The ``Header`` class has been rewritten, and the ``CardList`` class is
deprecated. Most of the basic details of working with FITS headers are
unchanged, and will not be noticed by most users. But there are differences
in some areas that will be of interest to advanced users, and to application
developers. For full details of the changes, see the "Header Interface
Transition Guide" section in the PyFITS documentation. See ticket #64 on
the PyFITS Trac for futher details and background. Some highlights are
listed below:
* The Header class now fully implements the Python dict interface, and can
be used interchangably with a dict, where the keys are header keywords.
* New keywords can be added to the header using normal keyword assignment
(previously it was necessary to use ``Header.update`` to add new
keywords). For example::
>>> header['NAXIS'] = 2
will update the existing 'FOO' keyword if it already exists, or add a new
one if it doesn't exist, just like a dict.
* It is possible to assign both a value and a comment at the same time using
a tuple::
>>> header['NAXIS'] = (2, 'Number of axes')
* To add/update a new card and ensure it's added in a specific location, use
``Header.set()``::
>>> header.set('NAXIS', 2, 'Number of axes', after='BITPIX')
This works the same as the old ``Header.update()``. ``Header.update()``
still works in the old way too, but is deprecated.
* Although ``Card`` objects still exist, it generally is not necessary to
work with them directly. ``Header.ascardlist()``/``Header.ascard`` are
deprecated and should not be used. To directly access the ``Card``
objects in a header, use ``Header.cards``.
* To access card comments, it is still possible to either go through the
card itself, or through ``Header.comments``. For example::
>>> header.cards['NAXIS'].comment
Number of axes
>>> header.comments['NAXIS']
Number of axes
* ``Card`` objects can now be used interchangeably with
``(keyword, value, comment)`` 3-tuples. They still have ``.value`` and
``.comment`` attributes as well. The ``.key`` attribute has been renamed
to ``.keyword`` for consistency, though ``.key`` is still supported (but
deprecated).
- Memory mapping is now used by default to access HDU data. That is,
``pyfits.open()`` uses ``memmap=True`` as the default. This provides better
performance in the majority of use cases--there are only some I/O intensive
applications where it might not be desirable. Enabling mmap by default also
enabled finding and fixing a large number of bugs in PyFITS' handling of
memory-mapped data (most of these bug fixes were backported to PyFITS
3.0.5). (#85)
* A new ``pyfits.USE_MEMMAP`` global variable was added. Set
``pyfits.USE_MEMMAP = False`` to change the default memmap setting for
opening files. This is especially useful for controlling the behavior in
applications where pyfits is deeply embedded.
* Likewise, a new ``PYFITS_USE_MEMMAP`` environment variable is supported.
Set ``PYFITS_USE_MEMMAP = 0`` in your environment to change the default
behavior.
- The ``size()`` method on HDU objects is now a ``.size`` property--this
returns the size in bytes of the data portion of the HDU, and in most cases
is equivalent to ``hdu.data.nbytes`` (#83)
- ``BinTableHDU.tdump`` and ``BinTableHDU.tcreate`` are deprecated--use
``BinTableHDU.dump`` and ``BinTableHDU.load`` instead. The new methods
output the table data in a slightly different format from previous versions,
which places quotes around each value. This format is compatible with data
dumps from previous versions of PyFITS, but not vice-versa due to a parsing
bug in older versions.
- Likewise the ``pyfits.tdump`` and ``pyfits.tcreate`` convenience function
versions of these methods have been renamed ``pyfits.tabledump`` and
``pyfits.tableload``. The old deprecated, but currently retained for
backwards compatibility. (r1125)
- A new global variable ``pyfits.EXTENSION_NAME_CASE_SENSITIVE`` was added.
This serves as a replacement for ``pyfits.setExtensionNameCaseSensitive``
which is not deprecated and may be removed in a future version. To enable
case-sensitivity of extension names (i.e. treat 'sci' as distict from 'SCI')
set ``pyfits.EXTENSION_NAME_CASE_SENSITIVE = True``. The default is
``False``. (r1139)
- A new global configuration variable ``pyfits.STRIP_HEADER_WHITESPACE`` was
added. By default, if a string value in a header contains trailing
whitespace, that whitespace is automatically removed when the value is read.
Now if you set ``pyfits.STRIP_HEADER_WHITESPACE = False`` all whitespace is
preserved. (#146)
- The old ``classExtensions`` extension mechanism (which was deprecated in
PyFITS 3.0) is removed outright. To our knowledge it was no longer used
anywhere. (r1309)
- Warning messages from PyFITS issued through the Python warnings API are now
output to stderr instead of stdout, as is the default. PyFITS no longer
modifies the default behavior of the warnings module with respect to which
stream it outputs to. (r1319)
- The ``checksum`` argument to ``pyfits.open()`` now accepts a value of
'remove', which causes any existing CHECKSUM/DATASUM keywords to be ignored,
and removed when the file is saved.
New Features
^^^^^^^^^^^^
- Added support for the proposed "FITS" extension HDU type. See
http://listmgr.cv.nrao.edu/pipermail/fitsbits/2002-April/001094.html. FITS
HDUs contain an entire FITS file embedded in their data section. `FitsHDU`
objects work like other HDU types in PyFITS. Their ``.data`` attribute
returns the raw data array. However, they have a special ``.hdulist``
attribute which processes the data as a FITS file and returns it as an
in-memory HDUList object. FitsHDU objects also support a
``FitsHDU.fromhdulist()`` classmethod which returns a new `FitsHDU` object
that embeds the supplied HDUList. (#80)
- Added a new ``.is_image`` attribute on HDU objects, which is True if the HDU
data is an 'image' as opposed to a table or something else. Here the
meaning of 'image' is fairly loose, and mostly just means a Primary or Image
extension HDU, or possibly a compressed image HDU (#71)
- Added an ``HDUList.fromstring`` classmethod which can parse a FITS file
already in memory and instantiate and ``HDUList`` object from it. This
could be useful for integrating PyFITS with other libraries that work on
FITS file, such as CFITSIO. It may also be useful in streaming
applications. The name is a slight misnomer, in that it actually accepts
any Python object that implements the buffer interface, which includes
``bytes``, ``bytearray``, ``memoryview``, ``numpy.ndarray``, etc. (#90)
- Added a new ``pyfits.diff`` module which contains facilities for comparing
FITS files. One can use the ``pyfits.diff.FITSDiff`` class to compare two
FITS files in their entirety. There is also a ``pyfits.diff.HeaderDiff``
class for just comparing two FITS headers, and other similar interfaces.
See the PyFITS Documentation for more details on this interface. The
``pyfits.diff`` module powers the new ``fitsdiff`` program installed with
PyFITS. After installing PyFITS, run ``fitsdiff --help`` for usage details.
- ``pyfits.open()`` now accepts a ``scale_back`` argument. If set to
``True``, this automatically scales the data using the original BZERO and
BSCALE parameters the file had when it was first opened, if any, as well as
the original BITPIX. For example, if the original BITPIX were 16, this
would be equivalent to calling ``hdu.scale('int16', 'old')`` just before
calling ``flush()`` or ``close()`` on the file. This option applies to all
HDUs in the file. (#120)
- ``pyfits.open()`` now accepts a ``save_backup`` argument. If set to
``True``, this automatically saves a backup of the original file before
flushing any changes to it (this of course only applies to update and append
mode). This may be especially useful when working with scaled image data.
(#121)
Changes in Behavior
^^^^^^^^^^^^^^^^^^^
- Warnings from PyFITS are not output to stderr by default, instead of stdout
as it has been for some time. This is contrary to most users' expectations
and makes it more difficult for them to separate output from PyFITS from the
desired output for their scripts. (r1319)
Bug Fixes
^^^^^^^^^
- Fixed ``pyfits.tcreate()`` (now ``pyfits.tableload()``) to be more robust
when encountering blank lines in a column definition file (#14)
- Fixed a fairly rare crash that could occur in the handling of CONTINUE cards
when using Numpy 1.4 or lower (though 1.4 is the oldest version supported by
PyFITS). (r1330)
- Fixed ``_BaseHDU.fromstring`` to actually correctly instantiate an HDU
object from a string/buffer containing the header and data of that HDU.
This allowed for the implementation of ``HDUList.fromstring`` described
above. (#90)
- Fixed a rare corner case where, in some use cases, (mildly, recoverably)
malformatted float values in headers were not properly returned as floats.
(#137)
- Fixed a corollary to the previous bug where float values with a leading zero
before the decimal point had the leading zero unnecessarily removed when
saving changes to the file (eg. "0.001" would be written back as ".001" even
if no changes were otherwise made to the file). (#137)
- When opening a file containing CHECKSUM and/or DATASUM keywords in update
mode, the CHECKSUM/DATASUM are updated and preserved even if the file was
opened with checksum=False. This change in behavior prevents checksums from
being unintentionally removed. (#148)
- Fixed a bug where ``ImageHDU.scale(option='old')`` wasn't working at all--it
was not restoring the image to its original BSCALE and BZERO values. (#162)
- Fixed a bug when writing out files containing zero-width table columns,
where the TFIELDS keyword would be updated incorrectly, leaving the table
largely unreadable. This fix will be backported to the 3.0.x series in
version 3.0.10. (#174)
3.0.9 (2012-08-06)
------------------
This is a bug fix release for the 3.0.x series.
Bug Fixes
^^^^^^^^^
- Fixed ``Header.values()``/``Header.itervalues()`` and ``Header.items()``/
``Header.iteritems()`` to correctly return the different values for
duplicate keywords (particularly commentary keywords like HISTORY and
COMMENT). This makes the old Header implementation slightly more compatible
with the new implementation in PyFITS 3.1. (#127)
.. note::
This fix did not change the existing behavior from earlier PyFITS
versions where ``Header.keys()`` returns all keywords in the header with
duplicates removed. PyFITS 3.1 changes that behavior, so that
``Header.keys()`` includes duplicates.
- Fixed a bug where ``ImageHDU.scale(option='old')`` wasn't working at all--it
was not restoring the image to its original BSCALE and BZERO values. (#162)
- Fixed a bug where opening a file containing compressed image HDUs in
'update' mode and then immediately closing it without making any changes
caused the file to be rewritten unncessarily. (#167)
- Fixed two memory leaks that could occur when writing compressed image data,
or in some cases when opening files containing compressed image HDUs in
'update' mode. (#168)
3.0.8 (2012-06-04)
------------------
Changes in Behavior
^^^^^^^^^^^^^^^^^^^
- Prior to this release, image data sections did not work with scaled
data--that is, images with non-trivial BSCALE and/or BZERO values.
Previously, in order to read such images in sections, it was necessary to
manually apply the BSCALE+BZERO to each section. It's worth noting that
sections *did* support pseudo-unsigned ints (flakily). This change just
extends that support for general BSCALE+BZERO values.
Bug Fixes
^^^^^^^^^
- Fixed a bug that prevented updates to values in boolean table columns from
being saved. This turned out to be a symptom of a deeper problem that could
prevent other table updates from being saved as well. (#139)
- Fixed a corner case in which a keyword comment ending with the string "END"
could, in some circumstances, cause headers (and the rest of the file after
that point) to be misread. (#142)
- Fixed support for scaled image data and psuedo-unsigned ints in image data
sections (``hdu.section``). Previously this was not supported at all. At
some point support was supposedly added, but it was buggy and incomplete.
Now the feature seems to work much better. (#143)
- Fixed the documentation to point out that image data sections *do* support
non-contiguous slices (and have for a long time). The documentation was
never updated to reflect this, and misinformed users that only contiguous
slices were supported, leading to some confusion. (#144)
- Fixed a bug where creating an ``HDUList`` object containing multiple PRIMARY
HDUs caused an infinite recursion when validating the object prior to
writing to a file. (#145)
- Fixed a rare but serious case where saving an update to a file that
previously had a CHECKSUM and/or DATASUM keyword, but removed the checksum
in saving, could cause the file to be slightly corrupted and unreadable.
(#147)
- Fixed problems with reading "non-standard" FITS files with primary headers
containing SIMPLE = F. PyFITS has never made many guarantees as to how such
files are handled. But it should at least be possible to read their
headers, and the data if possible. Saving changes to such a file should not
try to prepend an unwanted valid PRIMARY HDU. (#157)
- Fixed a bug where opening an image with ``disable_image_compression = True``
caused compression to be disabled for all subsequent ``pyfits.open()`` calls.
(r1651)
3.0.7 (2012-04-10)
------------------
Changes in Behavior
^^^^^^^^^^^^^^^^^^^
- Slices of GroupData objects now return new GroupData objects instead of
extended multi-row _Group objects. This is analogous to how PyFITS 3.0 fixed
FITS_rec slicing, and should have been fixed for GroupData at the same time.
The old behavior caused bugs where functions internal to Numpy expected that
slicing an ndarray would return a new ndarray. As this is a rare usecase
with a rare feature most users are unlikely to be affected by this change.
- The previously internal _Group object for representing individual group
records in a GroupData object are renamed Group and are now a public
interface. However, there's almost no good reason to create Group objects
directly, so it shouldn't be considered a "new feature".
- An annoyance from PyFITS 3.0.6 was fixed, where the value of the EXTEND
keyword was always being set to F if there are not actually any extension
HDUs. It was unnecessary to modify this value.
Bug Fixes
^^^^^^^^^
- Fixed GroupData objects to return new GroupData objects when sliced instead
of _Group record objects. See "Changes in behavior" above for more details.
- Fixed slicing of Group objects--previously it was not possible to slice
slice them at all.
- Made it possible to assign `np.bool_` objects as header values. (#123)
- Fixed overly strict handling of the EXTEND keyword; see "Changes in
behavior" above. (#124)
- Fixed many cases where an HDU's header would be marked as "modified" by
PyFITS and rewritten, even when no changes to the header are necessary.
(#125)
- Fixed a bug where the values of the PTYPEn keywords in a random groups HDU
were forced to be all lower-case when saving the file. (#130)
- Removed an unnecessary inline import in `ExtensionHDU.__setattr__` that was
causing some slowdown when opening files containing a large number of
extensions, plus a few other small (but not insignficant) performance
improvements thanks to Julian Taylor. (#133)
- Fixed a regression where header blocks containing invalid end-of-header
padding (i.e. null bytes instead of spaces) couldn't be parsed by PyFITS.
Such headers can be parsed again, but a warning is raised, as such headers
are not valid FITS. (#136)
- Fixed a memory leak where table data in random groups HDUs weren't being
garbage collected. (#138)
3.0.6 (2012-02-29)
------------------
Highlights
^^^^^^^^^^
The main reason for this release is to fix an issue that was introduced in
PyFITS 3.0.5 where merely opening a file containing scaled data (that is, with
non-trivial BSCALE and BZERO keywords) in 'update' mode would cause the data
to be automatically rescaled--possibly converting the data from ints to
floats--as soon as the file is closed, even if the application did not touch
the data. Now PyFITS will only rescale the data in an extension when the data
is actually accessed by the application. So opening a file in 'update' mode
in order to modify the header or append new extensions will not cause any
change to the data in existing extensions.
This release also fixes a few Windows-specific bugs found through more
extensive Windows testing, and other miscellaneous bugs.
Bug Fixes
^^^^^^^^^
- More accurate error messages when opening files containing invalid header
cards. (#109)
- Fixed a possible reference cycle/memory leak that was caught through more
extensive testing on Windows. (#112)
- Fixed 'ostream' mode to open the underlying file in 'wb' mode instead of 'w'
mode. (#112)
- Fixed a Windows-only issue where trying to save updates to a resized FITS
file could result in a crash due to there being open mmaps on that file.
(#112)
- Fixed a crash when trying to create a FITS table (i.e. with new_table())
from a Numpy array containing bool fields. (#113)
- Fixed a bug where manually initializing an ``HDUList`` with a list of of
HDUs wouldn't set the correct EXTEND keyword value on the primary HDU.
(#114)
- Fixed a crash that could occur when trying to deepcopy a Header in Python <
2.7. (#115)
- Fixed an issue where merely opening a scaled image in 'update' mode would
cause the data to be converted to floats when the file is closed. (#119)
3.0.5 (2012-01-30)
------------------
- Fixed a crash that could occur when accessing image sections of files
opened with memmap=True. (r1211)
- Fixed the inconsistency in the behavior of files opened in 'readonly' mode
when memmap=True vs. when memmap=False. In the latter case, although
changes to array data were not saved to disk, it was possible to update the
array data in memory. On the other hand with memmap=True, 'readonly' mode
prevented even in-memory modification to the data. This is what
'copyonwrite' mode was for, but difference in behavior was confusing. Now
'readonly' is equivalent to 'copyonwrite' when using memmap. If the old
behavior of denying changes to the array data is necessary, a new
'denywrite' mode may be used, though it is only applicable to files opened
with memmap. (r1275)
- Fixed an issue where files opened with memmap=True would return image data
as a raw numpy.memmap object, which can cause some unexpected
behaviors--instead memmap object is viewed as a numpy.ndarray. (r1285)
- Fixed an issue in Python 3 where a workaround for a bug in Numpy on Python 3
interacted badly with some other software, namely to vo.table package (and
possibly others). (r1320, r1337, and #110)
- Fixed buggy behavior in the handling of SIGINTs (i.e. Ctrl-C keyboard
interrupts) while flushing changes to a FITS file. PyFITS already prevented
SIGINTs from causing an incomplete flush, but did not clean up the signal
handlers properly afterwards, or reraise the keyboard interrupt once the
flush was complete. (r1321)
- Fixed a crash that could occur in Python 3 when opening files with checksum
checking enabled. (r1336)
- Fixed a small bug that could cause a crash in the `StreamingHDU` interface
when using Numpy below version 1.5.
- Fixed a crash that could occur when creating a new `CompImageHDU` from an
array of big-endian data. (#104)
- Fixed a crash when opening a file with extra zero padding at the end.
Though FITS files should not have such padding, it's not explictly forbidden
by the format either, and PyFITS shouldn't stumble over it. (#106)
- Fixed a major slowdown in opening tables containing large columns of string
values. (#111)
3.0.4 (2011-11-22)
------------------
- Fixed a crash when writing HCOMPRESS compressed images that could happen on
Python 2.5 and 2.6. (r1217)
- Fixed a crash when slicing an table in a file opened in 'readonly' mode with
memmap=True. (r1230)
- Writing changes to a file or writing to a new file verifies the output in
'fix' mode by default instead of 'exception'--that is, PyFITS will
automatically fix common FITS format errors rather than raising an
exception. (r1243)
- Fixed a bug where convenience functions such as getval() and getheader()
crashed when specifying just 'PRIMARY' as the extension to use (r1263).
- Fixed a bug that prevented passing keyword arguments (beyond the standard
data and header arguments) as positional arguments to the constructors of
extension HDU classes.
- Fixed some tests that were failing on Windows--in this case the tests
themselves failed to close some temp files and Windows refused to delete them
while there were still open handles on them. (r1295)
- Fixed an issue with floating point formatting in header values on Python 2.5
for Windows (and possibly other platforms). The exponent was zero-padded to
3 digits; although the FITS standard makes no specification on this, the
formatting is now normalized to always pad the exponent to two digits.
(r1295)
- Fixed a bug where long commentary cards (such as HISTORY and COMMENT) were
broken into multiple CONTINUE cards. However, commentary cards are not
expected to be found in CONTINUE cards. Instead these long cards are broken
into multiple commentary cards. (#97)
- GZIP/ZIP-compressed FITS files can be detected and opened regardless of
their filename extension. (#99)
- Fixed a serious bug where opening scaled images in 'update' mode and then
closing the file without touching the data would cause the file to be
corrupted. (#101)
3.0.3 (2011-10-05)
------------------
- Fixed several small bugs involving corner cases in record-valued keyword
cards (#70)
- In some cases HDU creation failed if the first keyword value in the header
was not a string value (#89)
- Fixed a crash when trying to compute the HDU checksum when the data array
contains an odd number of bytes (#91)
- Disabled an unnecessary warning that was displayed on opening compressed
HDUs with disable_image_compression = True (#92)
- Fixed a typo in code for handling HCOMPRESS compressed images.
3.0.2 (2011-09-23)
------------------
- The ``BinTableHDU.tcreate`` method and by extension the ``pyfits.tcreate``
function don't get tripped up by blank lines anymore (#14)
- The presence, value, and position of the EXTEND keyword in Primary HDUs is
verified when reading/writing a FITS file (#32)
- Improved documentation (in warning messages as well as in the handbook) that
PyFITS uses zero-based indexing (as one would expect for C/Python code, but
contrary to the PyFITS standard which was written with FORTRAN in mind)
(#68)
- Fixed a bug where updating a header card comment could cause the value to be
lost if it had not already been read from the card image string.
- Fixed a related bug where changes made directly to Card object in a header
(i.e. assigning directly to card.value or card.comment) would not propagate
when flushing changes to the file (#69) [Note: This and the bug above it
were originally reported as being fixed in version 3.0.1, but the fix was
never included in the release.]
- Improved file handling, particularly in Python 3 which had a few small file
I/O-related bugs (#76)
- Fixed a bug where updating a FITS file would sometimes cause it to lose its
original file permissions (#79)
- Fixed the handling of TDIMn keywords; 3.0 added support for them, but got
the axis order backards (they were treated as though they were row-major)
(#82)
- Fixed a crash when a FITS file containing scaled data is opened and
immediately written to a new file without explicitly viewing the data first
(#84)
- Fixed a bug where creating a table with columns named either 'names' or
'formats' resulted in an infinite recursion (#86)
3.0.1 (2011-09-12)
------------------
- Fixed a bug where updating a header card comment could cause the value to be
lost if it had not already been read from the card image string.
- Changed ``_TableBaseHDU.data`` so that if the data contain an empty table a
``FITS_rec`` object with zero rows is returned rather than ``None``.
- The ``.key`` attribute of ``RecordValuedKeywordCards`` now returns the full
keyword+field-specifier value, instead of just the plain keyword (#46)
- Fixed a related bug where changes made directly to Card object in a header
(i.e. assigning directly to card.value or card.comment) would not propagate
when flushing changes to the file (#69)
- Fixed a bug where writing a table with zero rows could fail in some cases
(#72)
- Miscellanous small bug fixes that were causing some tests to fail,
particularly on Python 3 (#74, #75)
- Fixed a bug where creating a table column from an array in non-native byte
order would not preserve the byte order, thus interpreting the column array
using the wrong byte order (#77)
3.0.0 (2011-08-23)
--------------------
- Contains major changes, bumping the version to 3.0
- Large amounts of refactoring and reorganization of the code; tried to
preserve public API backwards-compatibility with older versions (private API
has many changes and is not guaranteed to be backwards-compatible). There
are a few small public API changes to be aware of:
* The pyfits.rec module has been removed completely. If your version of
numpy does not have the numpy.core.records module it is too old to be used
with PyFITS.
* The ``Header.ascardlist()`` method is deprecated--use the ``.ascard``
attribute instead.
* ``Card`` instances have a new ``.cardimage`` attribute that should be used
rather than ``.ascardimage()``, which may become deprecated.
* The ``Card.fromstring()`` method is now a classmethod. It returns a new
``Card`` instance rather than modifying an existing instance.
* The ``req_cards()`` method on HDU instances has changed: The ``pos``
argument is not longer a string. It is either an integer value (meaning
the card's position must match that value) or it can be a function that
takes the card's position as it's argument, and returns True if the
position is valid. Likewise, the ``test`` argument no longer takes a
string, but instead a function that validates the card's value and returns
True or False.
* The ``get_coldefs()`` method of table HDUs is deprecated. Use the
``.columns`` attribute instead.
* The ``ColDefs.data`` attribute is deprecated--use ``ColDefs.columns``
instead (though in general you shouldn't mess with it directly--it might
become internal at some point).
* ``FITS_record`` objects take ``start`` and ``end`` as arguments instead of
``startColumn`` and ``endColumn`` (these are rarely created manually, so
it's unlikely that this change will affect anyone).
* ``BinTableHDU.tcreate()`` is now a classmethod, and returns a new
``BinTableHDU`` instance.
* Use ``ExtensionHDU`` and ``NonstandardExtHDU`` for making new extension HDU
classes. They are now public interfaces, wheres previously they were
private and prefixed with underscores.
* Possibly others--please report if you find any changes that cause
difficulties.
- Calls to deprecated functions will display a Deprecation warning. However,
in Python 2.7 and up Deprecation warnings are ignored by default, so run
Python with the `-Wd` option to see if you're using any deprecated
functions. If we get close to actually removing any functions, we might
make the Deprecation warnings display by default.
- Added basic Python 3 support
- Added support for multi-dimensional columns in tables as specified by the
TDIMn keywords (#47)
- Fixed a major memory leak that occurred when creating new tables with the
``new_table()`` function (#49)
be padded with zero-bytes) vs ASCII tables (where strings are padded with
spaces) (#15)
- Fixed a bug in which the case of Random Access Group parameters names was not
preserved when writing (#41)
- Added support for binary table fields with zero width (#42)
- Added support for wider integer types in ASCII tables; although this is non-
standard, some GEIS images require it (#45)
- Fixed a bug that caused the index_of() method of HDULists to crash when the
HDUList object is created from scratch (#48)
- Fixed the behavior of string padding in binary tables (where strings should
be padded with nulls instead of spaces)
- Fixed a rare issue that caused excessive memory usage when computing
checksums using a non-standard block size (see r818)
- Add support for forced uint data in image sections (#53)
- Fixed an issue where variable-length array columns were not extended when
creating a new table with more rows than the original (#54)
- Fixed tuple and list-based indexing of FITS_rec objects (#55)
- Fixed an issue where BZERO and BSCALE keywords were appended to headers in
the wrong location (#56)
- ``FITS_record`` objects (table rows) have full slicing support, including
stepping, etc. (#59)
- Fixed a bug where updating multiple files simultaneously (such as when
running parallel processes) could lead to a race condition with mktemp()
(#61)
- Fixed a bug where compressed image headers were not in the order expected by
the funpack utility (#62)
jperkin
pushed a commit
that referenced
this pull request
Apr 1, 2014
--- 3.7 --- * Gnome keyring no longer relies on the GNOME_KEYRING_CONTROL environment variable. * Issue #140: Restore compatibility for older versions of PyWin32. --- 3.6 --- * `Pull Request #1 (github) <https://github.com/jaraco/keyring/pull/1>`_: Add support for packages that wish to bundle keyring by using relative imports throughout. --- 3.5 --- * Issue #49: Give the backend priorities a 1.5 multiplier bump when an XDG_CURRENT_DESKTOP environment variable matches the keyring's target environment. * Issue #99: Clarified documentation on location of config and data files. Prepared the code base to treat the two differently on Unix-based systems. For now, the behavior is unchanged. --- 3.4 --- * Extracted FileBacked and Encrypted base classes. * Add a pyinstaller hook to expose backend modules. Ref #124 * Pull request #41: Use errno module instead of hardcoding error codes. * SecretService backend: correctly handle cases when user dismissed the collection creation or unlock prompt. --- 3.3 --- * Pull request #40: KWallet backend will now honor the ``KDE_FULL_SESSION`` environment variable as found on openSUSE. ----- 3.2.1 ----- * SecretService backend: use a different function to check that the backend is functional. The default collection may not exist, but the collection will remain usable in that case. Also, make the error message more verbose. Resolves https://bugs.launchpad.net/bugs/1242412. --- 3.2 --- * Issue #120: Invoke KeyringBackend.priority during load_keyring to ensure that any keyring loaded is actually viable (or raises an informative exception). * File keyring: - Issue #123: fix removing items. - Correctly escape item name when removing. - Use with statement when working with files. * Add a test for removing one item in group. * Issue #81: Added experimental support for third-party backends. See `keyring.core._load_library_extensions` for information on supplying a third-party backend. --- 3.1 --- * All code now runs natively on both Python 2 and Python 3, no 2to3 conversion is required. * Testsuite: clean up, and make more use of unittest2 methods. ----- 3.0.5 ----- * Issue #114: Fix logic in pyfs detection. ----- 3.0.4 ----- * Issue #114: Fix detection of pyfs under Mercurial Demand Import. ----- 3.0.3 ----- * Simplified the implementation of ``keyring.core.load_keyring``. It now uses ``__import__`` instead of loading modules explicitly. The ``keyring_path`` parameter to ``load_keyring`` is now deprecated. Callers should instead ensure their module is available on ``sys.path`` before calling ``load_keyring``. Keyring still honors ``keyring-path``. This change fixes Issue #113 in which the explicit module loading of keyring modules was breaking package-relative imports. ----- 3.0.2 ----- * Renamed ``keyring.util.platform`` to ``keyring.util.platform_``. As reported in Issue #112 and `mercurial_keyring #31 <https://bitbucket.org/Mekk/mercurial_keyring/issue/31>`_ and in `Mercurial itself <http://bz.selenic.com/show_bug.cgi?id=4029>`_, Mercurial's Demand Import does not honor ``absolute_import`` directives, so it's not possible to have a module with the same name as another top-level module. A patch is in place to fix this issue upstream, but to support older Mercurial versions, this patch will remain for some time. ----- 3.0.1 ----- * Ensure that modules are actually imported even in Mercurial's Demand Import environment. --- 3.0 --- * Removed support for Python 2.5. * Removed names in ``keyring.backend`` moved in 1.1 and previously retained for compatibilty. ----- 2.1.1 ----- * Restored Python 2.5 compatibility (lost in 2.0). --- 2.1 --- * Issue #10: Added a 'store' attribute to the OS X Keyring, enabling custom instances of the KeyringBackend to use another store, such as the 'internet' store. For example:: keys = keyring.backends.OS_X.Keyring() keys.store = 'internet' keys.set_password(system, user, password) keys.get_password(system, user) The default for all instances can be set in the class:: keyring.backends.OS_X.Keyring.store = 'internet' * GnomeKeyring: fix availability checks, and make sure the warning message from pygobject is not printed. * Fixes to GnomeKeyring and SecretService tests. ----- 2.0.3 ----- * Issue #112: Backend viability/priority checks now are more aggressive about module presence checking, requesting ``__name__`` from imported modules to force the demand importer to actually attempt the import. ----- 2.0.2 ----- * Issue #111: Windows backend isn't viable on non-Windows platforms. ----- 2.0.1 ----- * Issue #110: Fix issues with ``Windows.RegistryKeyring``. --- 2.0 --- * Issue #80: Prioritized backend support. The primary interface for Keyring backend classes has been refactored to now emit a 'priority' based on the current environment (operating system, libraries available, etc). These priorities provide an indication of the applicability of that backend for the current environment. Users are still welcome to specify a particular backend in configuration, but the default behavior should now be to select the most appropriate backend by default. ----- 1.6.1 ----- * Only include pytest-runner in 'setup requirements' when ptr invocation is indicated in the command-line (Issue #105). --- 1.6 --- * GNOME Keyring backend: - Use the same attributes (``username`` / ``service``) as the SecretService backend uses, allow searching for old ones for compatibility. - Also set ``application`` attribute. - Correctly handle all types of errors, not only ``CANCELLED`` and ``NO_MATCH``. - Avoid printing warnings to stderr when GnomeKeyring is not available. * Secret Service backend: - Use a better label for passwords, the same as GNOME Keyring backend uses. --- 1.5 --- * SecretService: allow deleting items created using previous python-keyring versions. Before the switch to secretstorage, python-keyring didn't set "application" attribute. Now in addition to supporting searching for items without that attribute, python-keyring also supports deleting them. * Use ``secretstorage.get_default_collection`` if it's available. On secretstorage 1.0 or later, python-keyring now tries to create the default collection if it doesn't exist, instead of just raising the error. * Improvements for tests, including fix for Issue #102. --- 1.4 --- * Switch GnomeKeyring backend to use native libgnome-keyring via GObject Introspection, not the obsolete python-gnomekeyring module. --- 1.3 --- * Use the `SecretStorage library <https://pypi.python.org/pypi/SecretStorage>`_ to implement the Secret Service backend (instead of using dbus directly). Now the keyring supports prompting for and deleting passwords. Fixes #69, #77, and #93. * Catch `gnomekeyring.IOError` per the issue `reported in Nova client <https://bugs.launchpad.net/python-novaclient/+bug/1116302>`_. * Issue #92 Added support for delete_password on Mac OS X Keychain. ----- 1.2.3 ----- * Fix for Encrypted File backend on Python 3. * Issue #97 Improved support for PyPy. ----- 1.2.2 ----- * Fixed handling situations when user cancels kwallet dialog or denies access for the app. ----- 1.2.1 ----- * Fix for kwallet delete. * Fix for OS X backend on Python 3. * Issue #84: Fix for Google backend on Python 3 (use of raw_input not caught by 2to3). --- 1.2 --- * Implemented delete_password on most keyrings. Keyring 2.0 will require delete_password to implement a Keyring. Fixes #79. ----- 1.1.2 ----- * Issue #78: pyfilesystem backend now works on Windows. ----- 1.1.1 ----- * Fixed MANIFEST.in so .rst files are included. --- 1.1 --- This is the last build that will support installation in a pure-distutils mode. Subsequent releases will require setuptools/distribute to install. Python 3 installs have always had this requirement (for 2to3 install support), but starting with the next minor release (1.2+), setuptools will be required. Additionally, this release has made some substantial refactoring in an attempt to modularize the backends. An attempt has been made to maintain 100% backward-compatibility, although if your library does anything fancy with module structure or clasess, some tweaking may be necessary. The backward-compatible references will be removed in 2.0, so the 1.1+ releases represent a transitional implementation which should work with both legacy and updated module structure. * Added a console-script 'keyring' invoking the command-line interface. * Deprecated _ExtensionKeyring. * Moved PasswordSetError and InitError to an `errors` module (references kept for backward-compatibility). * Moved concrete backend implementations into their own modules (references kept for backward compatibility): - OSXKeychain -> backends.OS_X.Keyring - GnomeKeyring -> backends.Gnome.Keyring - SecretServiceKeyring -> backends.SecretService.Keyring - KDEKWallet -> backends.kwallet.Keyring - BasicFileKeyring -> backends.file.BaseKeyring - CryptedFileKeyring -> backends.file.EncryptedKeyring - UncryptedFileKeyring -> backends.file.PlaintextKeyring - Win32CryptoKeyring -> backends.Windows.EncryptedKeyring - WinVaultKeyring -> backends.Windows.WinVaultKeyring - Win32CryptoRegistry -> backends.Windows.RegistryKeyring - select_windows_backend -> backends.Windows.select_windows_backend - GoogleDocsKeyring -> backends.Google.DocsKeyring - Credential -> keyring.credentials.Credential - BaseCredential -> keyring.credentials.SimpleCredential - EnvironCredential -> keyring.credentials.EnvironCredential - GoogleEnvironCredential -> backends.Google.EnvironCredential - BaseKeyczarCrypter -> backends.keyczar.BaseCrypter - KeyczarCrypter -> backends.keyczar.Crypter - EnvironKeyczarCrypter -> backends.keyczar.EnvironCrypter - EnvironGoogleDocsKeyring -> backends.Google.KeyczarDocsKeyring - BasicPyfilesystemKeyring -> backends.pyfs.BasicKeyring - UnencryptedPyfilesystemKeyring -> backends.pyfs.PlaintextKeyring - EncryptedPyfilesystemKeyring -> backends.pyfs.EncryptedKeyring - EnvironEncryptedPyfilesystemKeyring -> backends.pyfs.KeyczarKeyring - MultipartKeyringWrapper -> backends.multi.MultipartKeyringWrapper * Officially require Python 2.5 or greater (although unofficially, this requirement has been in place since 0.10). --- 1.0 --- This backward-incompatible release attempts to remove some cruft from the codebase that's accumulated over the versions. * Removed legacy file relocation support. `keyring` no longer supports loading configuration or file-based backends from ~. If upgrading from 0.8 or later, the files should already have been migrated to their new proper locations. If upgrading from 0.7.x or earlier, the files will have to be migrated manually. * Removed CryptedFileKeyring migration support. To maintain an existing CryptedFileKeyring, one must first upgrade to 0.9.2 or later and access the keyring before upgrading to 1.0 to retain the existing keyring. * File System backends now create files without group and world permissions. Fixes #67. ------ 0.10.1 ------ * Merged 0.9.3 to include fix for #75. ---- 0.10 ---- * Add support for using `Keyczar <http://www.keyczar.org/>`_ to encrypt keyrings. Keyczar is "an open source cryptographic toolkit designed to make it easier and safer for developers to use cryptography in their applications." * Added support for storing keyrings on Google Docs or any other filesystem supported by pyfilesystem. * Fixed issue in Gnome Keyring when unicode is passed as the service name, username, or password. * Tweaked SecretService code to pass unicode to DBus, as unicode is the preferred format. * Issue #71 - Fixed logic in CryptedFileKeyring. * Unencrypted keyring file will be saved with user read/write (and not group or world read/write). ----- 0.9.3 ----- * Ensure migration is run when get_password is called. Fixes #75. Thanks to Marc Deslauriers for reporting the bug and supplying the patch. ----- 0.9.2 ----- * Keyring 0.9.1 introduced a whole different storage format for the CryptedFileKeyring, but this introduced some potential compatibility issues. This release incorporates the security updates but reverts to the INI file format for storage, only encrypting the passwords and leaving the service and usernames in plaintext. Subsequent releases may incorporate a new keyring to implement a whole-file encrypted version. Fixes #64. * The CryptedFileKeyring now requires simplejson for Python 2.5 clients. ----- 0.9.1 ----- * Fix for issue where SecretServiceBackend.set_password would raise a UnicodeError on Python 3 or when a unicode password was provided on Python 2. * CryptedFileKeyring now uses PBKDF2 to derive the key from the user's password and a random hash. The IV is chosen randomly as well. All the stored passwords are encrypted at once. Any keyrings using the old format will be automatically converted to the new format (but will no longer be compatible with 0.9 and earlier). The user's password is no longer limited to 32 characters. PyCrypto 2.5 or greater is now required for this keyring. --- 0.9 --- * Add support for GTK 3 and secret service D-Bus. Fixes #52. * Issue #60 - Use correct method for decoding. ----- 0.8.1 ----- * Fix regression in keyring lib on Windows XP where the LOCALAPPDATA environment variable is not present. --- 0.8 --- * Mac OS X keyring backend now uses subprocess calls to the `security` command instead of calling the API, which with the latest updates, no longer allows Python to invoke from a virtualenv. Fixes issue #13. * When using file-based storage, the keyring files are no longer stored in the user's home directory, but are instead stored in platform-friendly locations (`%localappdata%\Python Keyring` on Windows and according to the freedesktop.org Base Dir Specification (`$XDG_DATA_HOME/python_keyring` or `$HOME/.local/share/python_keyring`) on other operating systems). This fixes #21. *Backward Compatibility Notice* Due to the new storage location for file-based keyrings, keyring 0.8 supports backward compatibility by automatically moving the password files to the updated location. In general, users can upgrade to 0.8 and continue to operate normally. Any applications that customize the storage location or make assumptions about the storage location will need to take this change into consideration. Additionally, after upgrading to 0.8, it is not possible to downgrade to 0.7 without manually moving configuration files. In 1.0, the backward compatibilty will be removed. ----- 0.7.1 ----- * Removed non-ASCII characters from README and CHANGES docs (required by distutils if we're to include them in the long_description). Fixes #55. --- 0.7 --- * Python 3 is now supported. All tests now pass under Python 3.2 on Windows and Linux (although Linux backend support is limited). Fixes #28. * Extension modules on Mac and Windows replaced by pure-Python ctypes implementations. Thanks to Jerome Laheurte. * WinVaultKeyring now supports multiple passwords for the same service. Fixes #47. * Most of the tests don't require user interaction anymore. * Entries stored in Gnome Keyring appears now with a meaningful name if you try to browser your keyring (for ex. with Seahorse) * Tests from Gnome Keyring no longer pollute the user own keyring. * `keyring.util.escape` now accepts only unicode strings. Don't try to encode strings passed to it. ----- 0.6.2 ----- * fix compiling on OSX with XCode 4.0 ----- 0.6.1 ----- * Gnome keyring should not be used if there is no DISPLAY or if the dbus is not around (https://bugs.launchpad.net/launchpadlib/+bug/752282). --- 0.6 --- * Added `keyring.http` for facilitating HTTP Auth using keyring. * Add a utility to access the keyring from the command line.
jperkin
pushed a commit
that referenced
this pull request
Apr 15, 2014
--- 3.7 --- * Gnome keyring no longer relies on the GNOME_KEYRING_CONTROL environment variable. * Issue #140: Restore compatibility for older versions of PyWin32. --- 3.6 --- * `Pull Request #1 (github) <https://github.com/jaraco/keyring/pull/1>`_: Add support for packages that wish to bundle keyring by using relative imports throughout. --- 3.5 --- * Issue #49: Give the backend priorities a 1.5 multiplier bump when an XDG_CURRENT_DESKTOP environment variable matches the keyring's target environment. * Issue #99: Clarified documentation on location of config and data files. Prepared the code base to treat the two differently on Unix-based systems. For now, the behavior is unchanged. --- 3.4 --- * Extracted FileBacked and Encrypted base classes. * Add a pyinstaller hook to expose backend modules. Ref #124 * Pull request #41: Use errno module instead of hardcoding error codes. * SecretService backend: correctly handle cases when user dismissed the collection creation or unlock prompt. --- 3.3 --- * Pull request #40: KWallet backend will now honor the ``KDE_FULL_SESSION`` environment variable as found on openSUSE. ----- 3.2.1 ----- * SecretService backend: use a different function to check that the backend is functional. The default collection may not exist, but the collection will remain usable in that case. Also, make the error message more verbose. Resolves https://bugs.launchpad.net/bugs/1242412. --- 3.2 --- * Issue #120: Invoke KeyringBackend.priority during load_keyring to ensure that any keyring loaded is actually viable (or raises an informative exception). * File keyring: - Issue #123: fix removing items. - Correctly escape item name when removing. - Use with statement when working with files. * Add a test for removing one item in group. * Issue #81: Added experimental support for third-party backends. See `keyring.core._load_library_extensions` for information on supplying a third-party backend. --- 3.1 --- * All code now runs natively on both Python 2 and Python 3, no 2to3 conversion is required. * Testsuite: clean up, and make more use of unittest2 methods. ----- 3.0.5 ----- * Issue #114: Fix logic in pyfs detection. ----- 3.0.4 ----- * Issue #114: Fix detection of pyfs under Mercurial Demand Import. ----- 3.0.3 ----- * Simplified the implementation of ``keyring.core.load_keyring``. It now uses ``__import__`` instead of loading modules explicitly. The ``keyring_path`` parameter to ``load_keyring`` is now deprecated. Callers should instead ensure their module is available on ``sys.path`` before calling ``load_keyring``. Keyring still honors ``keyring-path``. This change fixes Issue #113 in which the explicit module loading of keyring modules was breaking package-relative imports. ----- 3.0.2 ----- * Renamed ``keyring.util.platform`` to ``keyring.util.platform_``. As reported in Issue #112 and `mercurial_keyring #31 <https://bitbucket.org/Mekk/mercurial_keyring/issue/31>`_ and in `Mercurial itself <http://bz.selenic.com/show_bug.cgi?id=4029>`_, Mercurial's Demand Import does not honor ``absolute_import`` directives, so it's not possible to have a module with the same name as another top-level module. A patch is in place to fix this issue upstream, but to support older Mercurial versions, this patch will remain for some time. ----- 3.0.1 ----- * Ensure that modules are actually imported even in Mercurial's Demand Import environment. --- 3.0 --- * Removed support for Python 2.5. * Removed names in ``keyring.backend`` moved in 1.1 and previously retained for compatibilty. ----- 2.1.1 ----- * Restored Python 2.5 compatibility (lost in 2.0). --- 2.1 --- * Issue #10: Added a 'store' attribute to the OS X Keyring, enabling custom instances of the KeyringBackend to use another store, such as the 'internet' store. For example:: keys = keyring.backends.OS_X.Keyring() keys.store = 'internet' keys.set_password(system, user, password) keys.get_password(system, user) The default for all instances can be set in the class:: keyring.backends.OS_X.Keyring.store = 'internet' * GnomeKeyring: fix availability checks, and make sure the warning message from pygobject is not printed. * Fixes to GnomeKeyring and SecretService tests. ----- 2.0.3 ----- * Issue #112: Backend viability/priority checks now are more aggressive about module presence checking, requesting ``__name__`` from imported modules to force the demand importer to actually attempt the import. ----- 2.0.2 ----- * Issue #111: Windows backend isn't viable on non-Windows platforms. ----- 2.0.1 ----- * Issue #110: Fix issues with ``Windows.RegistryKeyring``. --- 2.0 --- * Issue #80: Prioritized backend support. The primary interface for Keyring backend classes has been refactored to now emit a 'priority' based on the current environment (operating system, libraries available, etc). These priorities provide an indication of the applicability of that backend for the current environment. Users are still welcome to specify a particular backend in configuration, but the default behavior should now be to select the most appropriate backend by default. ----- 1.6.1 ----- * Only include pytest-runner in 'setup requirements' when ptr invocation is indicated in the command-line (Issue #105). --- 1.6 --- * GNOME Keyring backend: - Use the same attributes (``username`` / ``service``) as the SecretService backend uses, allow searching for old ones for compatibility. - Also set ``application`` attribute. - Correctly handle all types of errors, not only ``CANCELLED`` and ``NO_MATCH``. - Avoid printing warnings to stderr when GnomeKeyring is not available. * Secret Service backend: - Use a better label for passwords, the same as GNOME Keyring backend uses. --- 1.5 --- * SecretService: allow deleting items created using previous python-keyring versions. Before the switch to secretstorage, python-keyring didn't set "application" attribute. Now in addition to supporting searching for items without that attribute, python-keyring also supports deleting them. * Use ``secretstorage.get_default_collection`` if it's available. On secretstorage 1.0 or later, python-keyring now tries to create the default collection if it doesn't exist, instead of just raising the error. * Improvements for tests, including fix for Issue #102. --- 1.4 --- * Switch GnomeKeyring backend to use native libgnome-keyring via GObject Introspection, not the obsolete python-gnomekeyring module. --- 1.3 --- * Use the `SecretStorage library <https://pypi.python.org/pypi/SecretStorage>`_ to implement the Secret Service backend (instead of using dbus directly). Now the keyring supports prompting for and deleting passwords. Fixes #69, #77, and #93. * Catch `gnomekeyring.IOError` per the issue `reported in Nova client <https://bugs.launchpad.net/python-novaclient/+bug/1116302>`_. * Issue #92 Added support for delete_password on Mac OS X Keychain. ----- 1.2.3 ----- * Fix for Encrypted File backend on Python 3. * Issue #97 Improved support for PyPy. ----- 1.2.2 ----- * Fixed handling situations when user cancels kwallet dialog or denies access for the app. ----- 1.2.1 ----- * Fix for kwallet delete. * Fix for OS X backend on Python 3. * Issue #84: Fix for Google backend on Python 3 (use of raw_input not caught by 2to3). --- 1.2 --- * Implemented delete_password on most keyrings. Keyring 2.0 will require delete_password to implement a Keyring. Fixes #79. ----- 1.1.2 ----- * Issue #78: pyfilesystem backend now works on Windows. ----- 1.1.1 ----- * Fixed MANIFEST.in so .rst files are included. --- 1.1 --- This is the last build that will support installation in a pure-distutils mode. Subsequent releases will require setuptools/distribute to install. Python 3 installs have always had this requirement (for 2to3 install support), but starting with the next minor release (1.2+), setuptools will be required. Additionally, this release has made some substantial refactoring in an attempt to modularize the backends. An attempt has been made to maintain 100% backward-compatibility, although if your library does anything fancy with module structure or clasess, some tweaking may be necessary. The backward-compatible references will be removed in 2.0, so the 1.1+ releases represent a transitional implementation which should work with both legacy and updated module structure. * Added a console-script 'keyring' invoking the command-line interface. * Deprecated _ExtensionKeyring. * Moved PasswordSetError and InitError to an `errors` module (references kept for backward-compatibility). * Moved concrete backend implementations into their own modules (references kept for backward compatibility): - OSXKeychain -> backends.OS_X.Keyring - GnomeKeyring -> backends.Gnome.Keyring - SecretServiceKeyring -> backends.SecretService.Keyring - KDEKWallet -> backends.kwallet.Keyring - BasicFileKeyring -> backends.file.BaseKeyring - CryptedFileKeyring -> backends.file.EncryptedKeyring - UncryptedFileKeyring -> backends.file.PlaintextKeyring - Win32CryptoKeyring -> backends.Windows.EncryptedKeyring - WinVaultKeyring -> backends.Windows.WinVaultKeyring - Win32CryptoRegistry -> backends.Windows.RegistryKeyring - select_windows_backend -> backends.Windows.select_windows_backend - GoogleDocsKeyring -> backends.Google.DocsKeyring - Credential -> keyring.credentials.Credential - BaseCredential -> keyring.credentials.SimpleCredential - EnvironCredential -> keyring.credentials.EnvironCredential - GoogleEnvironCredential -> backends.Google.EnvironCredential - BaseKeyczarCrypter -> backends.keyczar.BaseCrypter - KeyczarCrypter -> backends.keyczar.Crypter - EnvironKeyczarCrypter -> backends.keyczar.EnvironCrypter - EnvironGoogleDocsKeyring -> backends.Google.KeyczarDocsKeyring - BasicPyfilesystemKeyring -> backends.pyfs.BasicKeyring - UnencryptedPyfilesystemKeyring -> backends.pyfs.PlaintextKeyring - EncryptedPyfilesystemKeyring -> backends.pyfs.EncryptedKeyring - EnvironEncryptedPyfilesystemKeyring -> backends.pyfs.KeyczarKeyring - MultipartKeyringWrapper -> backends.multi.MultipartKeyringWrapper * Officially require Python 2.5 or greater (although unofficially, this requirement has been in place since 0.10). --- 1.0 --- This backward-incompatible release attempts to remove some cruft from the codebase that's accumulated over the versions. * Removed legacy file relocation support. `keyring` no longer supports loading configuration or file-based backends from ~. If upgrading from 0.8 or later, the files should already have been migrated to their new proper locations. If upgrading from 0.7.x or earlier, the files will have to be migrated manually. * Removed CryptedFileKeyring migration support. To maintain an existing CryptedFileKeyring, one must first upgrade to 0.9.2 or later and access the keyring before upgrading to 1.0 to retain the existing keyring. * File System backends now create files without group and world permissions. Fixes #67. ------ 0.10.1 ------ * Merged 0.9.3 to include fix for #75. ---- 0.10 ---- * Add support for using `Keyczar <http://www.keyczar.org/>`_ to encrypt keyrings. Keyczar is "an open source cryptographic toolkit designed to make it easier and safer for developers to use cryptography in their applications." * Added support for storing keyrings on Google Docs or any other filesystem supported by pyfilesystem. * Fixed issue in Gnome Keyring when unicode is passed as the service name, username, or password. * Tweaked SecretService code to pass unicode to DBus, as unicode is the preferred format. * Issue #71 - Fixed logic in CryptedFileKeyring. * Unencrypted keyring file will be saved with user read/write (and not group or world read/write). ----- 0.9.3 ----- * Ensure migration is run when get_password is called. Fixes #75. Thanks to Marc Deslauriers for reporting the bug and supplying the patch. ----- 0.9.2 ----- * Keyring 0.9.1 introduced a whole different storage format for the CryptedFileKeyring, but this introduced some potential compatibility issues. This release incorporates the security updates but reverts to the INI file format for storage, only encrypting the passwords and leaving the service and usernames in plaintext. Subsequent releases may incorporate a new keyring to implement a whole-file encrypted version. Fixes #64. * The CryptedFileKeyring now requires simplejson for Python 2.5 clients. ----- 0.9.1 ----- * Fix for issue where SecretServiceBackend.set_password would raise a UnicodeError on Python 3 or when a unicode password was provided on Python 2. * CryptedFileKeyring now uses PBKDF2 to derive the key from the user's password and a random hash. The IV is chosen randomly as well. All the stored passwords are encrypted at once. Any keyrings using the old format will be automatically converted to the new format (but will no longer be compatible with 0.9 and earlier). The user's password is no longer limited to 32 characters. PyCrypto 2.5 or greater is now required for this keyring. --- 0.9 --- * Add support for GTK 3 and secret service D-Bus. Fixes #52. * Issue #60 - Use correct method for decoding. ----- 0.8.1 ----- * Fix regression in keyring lib on Windows XP where the LOCALAPPDATA environment variable is not present. --- 0.8 --- * Mac OS X keyring backend now uses subprocess calls to the `security` command instead of calling the API, which with the latest updates, no longer allows Python to invoke from a virtualenv. Fixes issue #13. * When using file-based storage, the keyring files are no longer stored in the user's home directory, but are instead stored in platform-friendly locations (`%localappdata%\Python Keyring` on Windows and according to the freedesktop.org Base Dir Specification (`$XDG_DATA_HOME/python_keyring` or `$HOME/.local/share/python_keyring`) on other operating systems). This fixes #21. *Backward Compatibility Notice* Due to the new storage location for file-based keyrings, keyring 0.8 supports backward compatibility by automatically moving the password files to the updated location. In general, users can upgrade to 0.8 and continue to operate normally. Any applications that customize the storage location or make assumptions about the storage location will need to take this change into consideration. Additionally, after upgrading to 0.8, it is not possible to downgrade to 0.7 without manually moving configuration files. In 1.0, the backward compatibilty will be removed. ----- 0.7.1 ----- * Removed non-ASCII characters from README and CHANGES docs (required by distutils if we're to include them in the long_description). Fixes #55. --- 0.7 --- * Python 3 is now supported. All tests now pass under Python 3.2 on Windows and Linux (although Linux backend support is limited). Fixes #28. * Extension modules on Mac and Windows replaced by pure-Python ctypes implementations. Thanks to Jerome Laheurte. * WinVaultKeyring now supports multiple passwords for the same service. Fixes #47. * Most of the tests don't require user interaction anymore. * Entries stored in Gnome Keyring appears now with a meaningful name if you try to browser your keyring (for ex. with Seahorse) * Tests from Gnome Keyring no longer pollute the user own keyring. * `keyring.util.escape` now accepts only unicode strings. Don't try to encode strings passed to it. ----- 0.6.2 ----- * fix compiling on OSX with XCode 4.0 ----- 0.6.1 ----- * Gnome keyring should not be used if there is no DISPLAY or if the dbus is not around (https://bugs.launchpad.net/launchpadlib/+bug/752282). --- 0.6 --- * Added `keyring.http` for facilitating HTTP Auth using keyring. * Add a utility to access the keyring from the command line.
jperkin
pushed a commit
that referenced
this pull request
Aug 12, 2014
What's New in libchewing 0.4.0 (Apr 11, 2014)
---------------------------------------------------------
* Add the following APIs:
- Userphrase manipulation
- chewing_userphrase_enumerate
- chewing_userphrase_has_next
- chewing_userphrase_get
- chewing_userphrase_add
- chewing_userphrase_remove
- chewing_userphrase_lookup
- Keyboardless action
- chewing_cand_open
- chewing_cand_close
- chewing_cand_string_by_index_static
- chewing_cand_choose_by_index
- chewing_cand_list_first
- chewing_cand_list_last
- chewing_cand_list_has_next
- chewing_cand_list_has_prev
- chewing_cand_list_next
- chewing_cand_list_prev
- chewing_commit_preedit_buf
- chewing_clean_preedit_buf
- chewing_clean_bopomofo_buf
- Bopomofo buffer
- chewing_bopomofo_Check
- chewing_bopomofo_String_static
- Static API
- chewing_aux_String_static
- chewing_buffer_String_static
- chewing_cand_String_static
- chewing_commit_String_static
- chewing_kbtype_String_static
- Misc
- chewing_new2
* Dictionary format:
- Remove text data support
- Introduce platform independent binary data representation
- Move binary data to share/libchewing/*
* Userphrase format:
- Support SQLite-based user phrase storage and manipulation
* New coding style:
- Use scripts/indent.sh to change coding style
* Bug fixed:
- Fix chewing_zuin_Check wrong return value #62
- Fix numlock key cannot output number #45
- Fix negative frequency problem #75
- Fix cannot select candidate when symbol exists #79
- Avoid clearing the buffer when Up arrow key is pressed and escCleanAllBuf is 1.
- Fix cannot handle numlock 9 correctly #88
- Fix invalid characters are committed when pre-edit buffer is full
- Fix AutoLearnPhrase cannot fill correct wordSeq #108
- Fix wrong auto learn when symbol in between #112
- Fix missing rpl_malloc for cross compilation #118
- Fix '\n' appear in symbol table #126
- Reopen candidate list for symbols with down key #127 #135
- Let up key close candidate list of symbols #131 #138
* Misc:
- Add `make check' in cmake build
- Change MAX_UTF8_SIZE to 4
- Update official website URL
- Use CreateFileA() instead of CreateFile() to stick with the ANSI API
- Do not check phrase longer than MAX_PHRASE_LEN
- Implement dynamic programming phrasing algorithm #73
- Clean bopomofo buffer when mode change to English mode #89 #97
- Update README to GFM.
- Replace 'INCLUDE' with 'AM_CPPFLAGS' #68 #114 #116
- Use [Shift]+[-] to input EM DASH (u+2014) as default #113 #124
- Use Backspace to close candidate window #128
- Use PgUp/PgDn to turn pages of candidates #129
- Update Windows default search path #78
- The word "zuin", "Zhuyin" are obsolete terms for "Bopomofo"
- Add const whenever possible in several APIs
- Toggle shape mode with shift-space #141 #142
* Successful stories:
- chewing-windows-tsf project provides Text Services Framework
support for Microsoft Windows.
jperkin
pushed a commit
that referenced
this pull request
Dec 1, 2014
Fix for AArch64. Release as 3.2.1.
Fix typo
Final 3.2 changes
Final 3.2 changes
Mention OpenRISC
Merge pull request #134 from s-macke/openrisc
Add OpenRISC support
Only run the complex type tests on supported platforms.
Add OpenRISC support
This patch adds support for the OpenRISC architecture.
(http://opencores.org/or1k/Main_Page)
This patch has been tested under Linux with QEMU-user emulation support.
- 32 Bit
- big endian
- delayed instructions
This is the only available configuration under Linux.
The description of the ABI can be found on the official website.
Is passes the testsuite except of the unwindtest_ffi_call.cc
testcase, which seems to be a problem of gcc and not libffi.
Some testcases of the gcc testsuite still fail.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Add complex type support. Mostly broken right now
Compile tests with -Wno-psabi when using GCC
Update version to 3.2
More README updates for 3.2
Update release notes.
2014-05-11 Bernd Edlinger <bernd.edlinger@hotmail.de>
Fix current cygwin-64 build problems.
* src/java_raw_api.c: Remove if !defined(FFI_NO_RAW_API).
* src/x86/ffi.c: Add if defined(__CYGWIN__).
* src/x86/win64.S (ffi_closure_win64, ffi_call_win64): Added
handling for FFI_TYPE_UINT64, FFI_TYPE_POINTER and FFI_TYPE_INT.
Added SEH information. Fixed formatting.
2014-09-10 Jakub Jelinek <jakub@redhat.com>
* src/powerpc/linux64.S: Emit .note.GNU-stack even when
POWERPC64 is not defined.
* src/powerpc/linux64_closure.S: Likewise. Also test _CALL_ELF == 2.
Fix -Werror=declaration-after-statement problem
2014-07-22 Dominik Vogt <vogt@linux.vnet.ibm.com>
* src/types.c (FFI_TYPEDEF, FFI_NONCONST_TYPEDEF): Merge the macros by
adding another argument that controls whether the result is const or not
(FFI_LDBL_CONST): Temporary macro to reduce ifdef confusion
* src/prep_cif.c (ffi_prep_cif_core): Replace list of systems with new
macro FFI_TARGET_SPECIFIC_STACK_SPACE_ALLOCATION
* src/pa/ffitarget.h (FFI_TARGET_SPECIFIC_STACK_SPACE_ALLOCATION):
Define.
* src/s390/ffitarget.h (FFI_TARGET_SPECIFIC_STACK_SPACE_ALLOCATION):
Define.
* src/x86/ffitarget.h (FFI_TARGET_SPECIFIC_STACK_SPACE_ALLOCATION):
Define.
2014-07-22 Dominik Vogt <vogt@linux.vnet.ibm.com>
* doc/libffi.texi (Primitive Types): Document ffi_type_complex_float,
ffi_type_complex_double and ffi_type_complex_longdouble
(Complex Types): New subsection.
(Complex Type Example): Ditto.
* testsuite/libffi.call/cls_align_complex_double.c: New
FFI_TYPE_COMPLEX test.
* testsuite/libffi.call/cls_align_complex_float.c: Ditto.
* testsuite/libffi.call/cls_align_complex_longdouble.c: Ditto.
* testsuite/libffi.call/cls_complex_double.c: Ditto.
* testsuite/libffi.call/cls_complex_float.c: Ditto.
* testsuite/libffi.call/cls_complex_longdouble.c: Ditto.
* testsuite/libffi.call/cls_complex_struct_double.c: Ditto.
* testsuite/libffi.call/cls_complex_struct_float.c: Ditto.
* testsuite/libffi.call/cls_complex_struct_longdouble.c: Ditto.
* testsuite/libffi.call/cls_complex_va_double.c: Ditto.
* testsuite/libffi.call/cls_complex_va_float.c: Ditto.
* testsuite/libffi.call/cls_complex_va_longdouble.c: Ditto.
* testsuite/libffi.call/complex_double.c: Ditto.
* testsuite/libffi.call/complex_defs_double.c: Ditto.
* testsuite/libffi.call/complex_float.c: Ditto.
* testsuite/libffi.call/complex_defs_float.c: Ditto.
* testsuite/libffi.call/complex_longdouble.c: Ditto.
* testsuite/libffi.call/complex_defs_longdouble.c: Ditto.
* testsuite/libffi.call/complex_int.c: Ditto.
* testsuite/libffi.call/many_complex_double.c: Ditto.
* testsuite/libffi.call/many_complex_float.c: Ditto.
* testsuite/libffi.call/many_complex_longdouble.c: Ditto.
* testsuite/libffi.call/return_complex1_double.c: Ditto.
* testsuite/libffi.call/return_complex1_float.c: Ditto.
* testsuite/libffi.call/return_complex1_longdouble.c: Ditto.
* testsuite/libffi.call/return_complex2_double.c: Ditto.
* testsuite/libffi.call/return_complex2_float.c: Ditto.
* testsuite/libffi.call/return_complex2_longdouble.c: Ditto.
* testsuite/libffi.call/return_complex_double.c: Ditto.
* testsuite/libffi.call/return_complex_float.c: Ditto.
* testsuite/libffi.call/return_complex_longdouble.c: Ditto.
* src/raw_api.c (ffi_raw_to_ptrarray): Handle FFI_TYPE_COMPLEX
(ffi_ptrarray_to_raw): Ditto.
* src/prep_cif.c (ffi_prep_cif_core): Abort if FFI_TYPE_COMPLEX is not
implemented in libffi for the target.
* src/java_raw_api.c (ffi_java_raw_size): FFI_TYPE_COMPLEX not supported
yet (abort).
(ffi_java_raw_to_ptrarray): Ditto.
(ffi_java_rvalue_to_raw): Ditto.
(ffi_java_raw_to_rvalue): Ditto.
* src/debug.c (ffi_type_test): Add debug tests for complex types.
* include/ffi.h.in (FFI_TYPE_COMPLEX): Add new FFI_TYPE_COMPLEX.
(FFI_TYPE_LAST): Bump.
(ffi_type_complex_float): Add new ffi_type_....
(ffi_type_complex_double): Ditto.
(ffi_type_complex_longdouble): Ditto.
2014-07-22 Dominik Vogt <vogt@linux.vnet.ibm.com>
* src/s390/ffitarget.h (FFI_TARGET_HAS_COMPLEX_TYPE): Define to provide
FFI_TYPE_COMPLEX support.
* src/s390/ffi.c (ffi_check_struct_type): Implement FFI_TYPE_COMPLEX
(ffi_prep_args): Ditto.
(ffi_prep_cif_machdep): Ditto.
(ffi_closure_helper_SYSV): Ditto.
Merge pull request #132 from nielsAD/master
Pascal and Register calling convention support on x86
Merge pull request #130 from frida/fix/darwin-aarch64-float-alignment
Fix alignment of FFI_TYPE_FLOAT for Apple's ARM64 ABI
Merge pull request #129 from frida/fix/darwin-aarch64-cif-prep
Fix non-variadic CIF initialization for Apple/ARM64
Merge pull request #124 from knuesel/master
Fix issue with builddir when calling configure with absolute path
Merge pull request #123 from ehsan/clang-cl
Add support for building with clang-cl
Determine whether register arguments (THISCALL/FASTCALL/REGISTER) are really passed via register to closures. Use stack if not.
Fixed THISCALL/FASTCALL closures and added basic support for PASCAL/REGISTER closures.
Support for calling functions with PASCAL and REGISTER calling conventions on x86 Windows/Linux.
Also changed indentation to be more consistent throughout the (adjusted) files.
Enable forcing the usage of the static CRT in libffi's msvc wrapper
This is required for AddressSanitizer builds with clang-cl.
Fix alignment of FFI_TYPE_FLOAT for Apple's ARM64 ABI
Fix non-variadic CIF initialization for Apple/ARM64
Turns out `aarch64_nfixedargs` wasn't initialized in the non-variadic
case, resulting in undefined behavior when allocating arguments.
Fix issue with builddir when calling configure with absolute path
Add support for building with clang-cl
Remove compiler warning
Fix paths in libffi.pc.in
Merge pull request #122 from rvandermeulen/1014976
Don't make --enable-debug imply using the debug CRT in libffi
Bug 1014976 - Don't make --enable-debug imply using the debug CRT in libffi.
Prepare for libffi 3.1.1
Add missing GNU stack markings in win32.S
Fix typo
Update current version.
Increment libtool version number
Merge pull request #120 from l0kod/tmpfile
Create temporary file with O_TMPFILE and O_CLOEXEC when available
closures: Check for mkostemp(3)
closures: Create temporary file with O_TMPFILE and O_CLOEXEC when available
The open_temp_exec_file_dir function can create a temporary file without
file system accessible link. If the O_TMPFILE flag is not defined (old
Linux kernel or libc) the behavior is unchanged.
The open_temp_exec_file_name function now need a new argument "flags"
(like O_CLOEXEC) used for temporary file creation.
The O_TMPFILE flag allow temporary file creation without race condition.
This feature/fix prevent another process to access the (future)
executable file from the file system.
The O_CLOEXEC flag automatically close the temporary file for any
execve. This avoid transmitting (executable) file descriptor to a child
process.
jperkin
pushed a commit
that referenced
this pull request
Dec 1, 2014
The update request to 1.0.18 from doc/TODO ([but actually obsolete, switch to libusb]) has been done. (upstream) Update 1.0.11 to 1.0.18 For detailed information about the changes below, please see the git log or visit: http://log.libusbx.org 2014-01-25: v1.0.18 *FINAL RELEASE* * Last release of libusbx, as the project is merging back again with libusb. As a result, continuation of the project will now occur from the following: o Main site: http://libusb.info o Git repository: https://github.com/libusb/libusb o SF repository: https://sourceforge.net/projects/libusb/ o Mailing list: libusb-devel@lists.sourceforge.net (registration req.) * Fix multiple memory leaks * Fix a crash when HID transfers return no data on Windows * Ensure all pending events are consumed * Improve Android and ucLinux support * Multiple Windows improvements (error logging, VS2013, VIA xHCI support) * Multiple OS X improvements (broken compilation, SIGFPE, 64bit support) 2013-09-06: v1.0.17 * Hotplug callbacks now always get passed a libusb_context, even if it is the default context. Previously NULL would be passed for the default context, but since the first context created is the default context, and most apps use only 1 context, this meant that apps explicitly creating a context would still get passed NULL * Android: Add .mk files to build with the Android NDK * Darwin: Add Xcode project * Darwin: Fix crash on unplug (#121) * Linux: Fix hang (deadlock) on libusb_exit * Linux: Fix libusbx build failure with --disable-udev (#124) * Linux: Fix libusb_get_device_list() hang with --disable-udev (#130) * OpenBSD: Update OpenBSD backend with support for control transfers to non-ugen(4) devices and make get_configuration() no longer generate I/O. Note that using this libusbx version on OpenBSD requires using OpenBSD 5.3-current or later. Users of older OpenBSD versions are advised to stay with the libusb shipped with OpenBSD (mpi) * Windows: fix libusb_dll_2010.vcxproj link errors (#129) * Various other bug fixes and improvements The (#xx) numbers are libusbx issue numbers, see ie: https://github.com/libusbx/libusbx/issues/121 2013-07-11: v1.0.16 * Add hotplug support for Darwin and Linux (#9) * Add superspeed endpoint companion descriptor support (#15) * Add BOS descriptor support (#15) * Make descriptor parsing code more robust * New libusb_get_port_numbers API, this is libusb_get_port_path without the unnecessary context parameter, libusb_get_port_path is now deprecated * New libusb_strerror API (#14) * New libusb_set_auto_detach_kernel_driver API (#17) * Improve topology API docs (#95) * Logging now use a single write call per log-message, avoiding log-message "interlacing" when using multiple threads. * Android: use Android logging when building on Android (#101) * Darwin: make libusb_reset reenumerate device on descriptors change (#89) * Darwin: add support for the LIBUSB_TRANSFER_ADD_ZERO_PACKET flag (#91) * Darwin: add a device cache (#112, #114) * Examples: Add sam3u_benchmark isochronous example by Harald Welte (#109) * Many other bug fixes and improvements The (#xx) numbers are libusbx issue numbers, see ie: https://github.com/libusbx/libusbx/issues/9 2013-04-15: v1.0.15 * Improve transfer cancellation and avoid short read failures on broken descriptors * Filter out 8-bit characters in libusb_get_string_descriptor_ascii() * Add WinCE support * Add library stress tests * Add Cypress FX3 firmware upload support for fxload sample * Add HID and kernel driver detach support capabilities detection * Add SuperSpeed detection on OS X * Fix bInterval value interpretation on OS X * Fix issues with autoclaim, composite HID devices, interface autoclaim and early abort in libusb_close() on Windows. Also add VS2012 solution files. * Improve fd event handling on Linux * Other bug fixes and improvements 2012-09-26: v1.0.14 * Reverts the previous API change with regards to bMaxPower. If this doesn't matter to you, you are encouraged to keep using v1.0.13, as it will use the same attribute as v2.0, to be released soon. * Note that LIBUSBX_API_VERSION is *decreased* to 0x010000FF and the previous guidelines with regards to concurrent use of MaxPower/bMaxPower still apply. 2012-09-20: v1.0.13 * [MAJOR] Fix a typo in the API with struct libusb_config_descriptor where MaxPower was used instead of bMaxPower, as defined in the specs. If your application was accessing the MaxPower attribute, and you need to maintain compatibility with libusb or older versions, see APPENDIX A below. * Fix broken support for the 0.1 -> 1.0 libusb-compat layer * Fix unwanted cancellation of pending timeouts as well as major timeout related bugs * Fix handling of HID and composite devices on Windows * Introduce LIBUSBX_API_VERSION macro * Add Cypress FX/FX2 firmware upload sample, based on fxload from http://linux-hotplug.sourceforge.net * Add libusb0 (libusb-win32) and libusbK driver support on Windows. Note that while the drivers allow it, isochronous transfers are not supported yet in libusbx. Also not supported yet is the use of libusb-win32 filter drivers on composite interfaces * Add support for the new get_capabilities ioctl on Linux and avoid unnecessary splitting of bulk transfers * Improve support for newer Intel and Renesas USB 3.0 controllers on Windows * Harmonize the device number for root hubs across platforms * Other bug fixes and improvements 2012-06-15: v1.0.12 * Fix a potential major regression with pthread on Linux * Fix missing thread ID from debug log output on cygwin * Fix possible crash when using longjmp and MinGW's gcc 4.6 * Add topology calls: libusb_get_port_number(), libusb_get_parent() & libusb_get_port_path() * Add toggleable debug, using libusb_set_debug() or the LIBUSB_DEBUG environment variable * Define log levels in libusb.h and set timestamp origin to first libusb_init() call * All logging is now sent to to stderr (info was sent to stdout previously) * Update log messages severity and avoid polluting log output on OS-X * Add HID driver support on Windows * Enable interchangeability of MSVC and MinGW DLLs * Additional bug fixes and improvements
jperkin
pushed a commit
that referenced
this pull request
Jun 17, 2015
### 1.7.2 / 2015-04-19 #### Bug fixes * Fix #138 (a regression of #131). PR #139. ### 1.7.1 / 2015-02-24 #### Enhancements * Add travis CI configuration (Eli Young (@elyscape), #130) * Add Rubinius to Build Matrix with Allowed Failure (Brandon Fish (bjfish), #132) * Make some adjustments on tests (Abinoam Marques Jr., #133, #134) * Drop support for Ruby 1.8 (Abinoam Marques Jr., #134) #### Bug fixes * Fix IO.console.winsize returning reversed column and line values (Fission Xuiptz (@fissionxuiptz)), #131) ### 1.7.0 / 2015-02-18 #### Bug fixes * Fix correct encoding of statements to output encoding (Dāvis (davispuh), #110) * Fix character echoing when echo is false and multibyte character is typed (Abinoam Marques Jr., #117 #118) * Fix backspace support on Cyrillic (Abinoam Marques Jr., #115 #118) * Fix returning wrong encoding when echo is false (Abinoam Marques Jr., #116 #118) * Fix Question #limit and #realine incompatibilities (Abinoam Marques Jr. #113 #120) * Fix/improve string coercion on #say (Abinoam Marques Jr., #98 #122) * Fix #terminal_size returning nil in some terminals (Abinoam Marques Jr., #85 #123) #### Enhancements * Improve #format_statement String coercion (Michael Bishop (michaeljbishop), #104) * Update homepage url on gemspec (Rubyforge->GitHub) (Edward Anderson (nilbus), #107) * Update COPYING file (Vít Ondruch (voxik), #109) * Improve multi-byte encoding support (Abinoam Marques Jr., #115 #116 #117 #118) * Make :grey -> :gray and :light -> :bright aliases (Abinoam Marques Jr., #114 #119) * Return the default object (as it is) when no answer given (Abinoam Marques Jr., #112 #121) * Added test for Yaml serialization of HighLine::String (Abinoam Marques Jr., #69 #124) * Make improvements on Changelog and Rakefile (Abinoam Marques Jr., #126 #127 #128)
jperkin
pushed a commit
that referenced
this pull request
Aug 24, 2015
ok wiz@. pkgsrc changes: * Delete a patch that is now imported upstream * Add test target support Changes: 2014-05-30: v1.0.19 * Add support for USB bulk streams on Linux and Mac OS X (#11) * Windows: Add AMD and Intel USB-3.0 root hub support * Windows: Fix USB 3.0 speed detection on Windows 8 or later (#10) * Added Russian translation for libusb_strerror strings * All: Various small fixes and cleanups The (#xx) numbers are libusb issue numbers, see ie: libusb/libusb#11 2014-01-25: v1.0.18 * Fix multiple memory leaks * Fix a crash when HID transfers return no data on Windows * Ensure all pending events are consumed * Improve Android and ucLinux support * Multiple Windows improvements (error logging, VS2013, VIA xHCI support) * Multiple OS X improvements (broken compilation, SIGFPE, 64bit support) 2013-09-06: v1.0.17 * Hotplug callbacks now always get passed a libusb_context, even if it is the default context. Previously NULL would be passed for the default context, but since the first context created is the default context, and most apps use only 1 context, this meant that apps explicitly creating a context would still get passed NULL * Android: Add .mk files to build with the Android NDK * Darwin: Add Xcode project * Darwin: Fix crash on unplug (#121) * Linux: Fix hang (deadlock) on libusb_exit * Linux: Fix libusb build failure with --disable-udev (#124) * Linux: Fix libusb_get_device_list() hang with --disable-udev (#130) * OpenBSD: Update OpenBSD backend with support for control transfers to non-ugen(4) devices and make get_configuration() no longer generate I/O. Note that using this libusb version on OpenBSD requires using OpenBSD 5.3-current or later. Users of older OpenBSD versions are advised to stay with the libusb shipped with OpenBSD (mpi) * Windows: fix libusb_dll_2010.vcxproj link errors (#129) * Various other bug fixes and improvements 2013-07-11: v1.0.16 * Add hotplug support for Darwin and Linux (#9) * Add superspeed endpoint companion descriptor support (#15) * Add BOS descriptor support (#15) * Make descriptor parsing code more robust * New libusb_get_port_numbers API, this is libusb_get_port_path without the unnecessary context parameter, libusb_get_port_path is now deprecated * New libusb_strerror API (#14) * New libusb_set_auto_detach_kernel_driver API (#17) * Improve topology API docs (#95) * Logging now use a single write call per log-message, avoiding log-message "interlacing" when using multiple threads. * Android: use Android logging when building on Android (#101) * Darwin: make libusb_reset reenumerate device on descriptors change (#89) * Darwin: add support for the LIBUSB_TRANSFER_ADD_ZERO_PACKET flag (#91) * Darwin: add a device cache (#112, #114) * Examples: Add sam3u_benchmark isochronous example by Harald Welte (#109) * Many other bug fixes and improvements The (#xx) numbers are libusbx issue numbers, see ie: https://github.com/libusbx/libusbx/issues/9 2013-04-15: v1.0.15 * Improve transfer cancellation and avoid short read failures on broken descriptors * Filter out 8-bit characters in libusb_get_string_descriptor_ascii() * Add WinCE support * Add library stress tests * Add Cypress FX3 firmware upload support for fxload sample * Add HID and kernel driver detach support capabilities detection * Add SuperSpeed detection on OS X * Fix bInterval value interpretation on OS X * Fix issues with autoclaim, composite HID devices, interface autoclaim and early abort in libusb_close() on Windows. Also add VS2012 solution files. * Improve fd event handling on Linux * Other bug fixes and improvements 2012-09-26: v1.0.14 * Reverts the previous API change with regards to bMaxPower. If this doesn't matter to you, you are encouraged to keep using v1.0.13, as it will use the same attribute as v2.0, to be released soon. * Note that LIBUSB_API_VERSION is *decreased* to 0x010000FF and the previous guidelines with regards to concurrent use of MaxPower/bMaxPower still apply. 2012-09-20: v1.0.13 * [MAJOR] Fix a typo in the API with struct libusb_config_descriptor where MaxPower was used instead of bMaxPower, as defined in the specs. If your application was accessing the MaxPower attribute, and you need to maintain compatibility with libusb or older versions, see APPENDIX A below. * Fix broken support for the 0.1 -> 1.0 libusb-compat layer * Fix unwanted cancellation of pending timeouts as well as major timeout related bugs * Fix handling of HID and composite devices on Windows * Introduce LIBUSB_API_VERSION macro * Add Cypress FX/FX2 firmware upload sample, based on fxload from http://linux-hotplug.sourceforge.net * Add libusb0 (libusb-win32) and libusbK driver support on Windows. Note that while the drivers allow it, isochronous transfers are not supported yet in libusb. Also not supported yet is the use of libusb-win32 filter drivers on composite interfaces * Add support for the new get_capabilities ioctl on Linux and avoid unnecessary splitting of bulk transfers * Improve support for newer Intel and Renesas USB 3.0 controllers on Windows * Harmonize the device number for root hubs across platforms * Other bug fixes and improvements 2012-06-15: v1.0.12 * Fix a potential major regression with pthread on Linux * Fix missing thread ID from debug log output on cygwin * Fix possible crash when using longjmp and MinGW's gcc 4.6 * Add topology calls: libusb_get_port_number(), libusb_get_parent() & libusb_get_port_path() * Add toggleable debug, using libusb_set_debug() or the LIBUSB_DEBUG environment variable * Define log levels in libusb.h and set timestamp origin to first libusb_init() call * All logging is now sent to to stderr (info was sent to stdout previously) * Update log messages severity and avoid polluting log output on OS-X * Add HID driver support on Windows * Enable interchangeability of MSVC and MinGW DLLs * Additional bug fixes and improvements 2012-05-08: v1.0.11 * Revert removal of critical Windows event handling that was introduced in 1.0.10 * Fix a possible deadlock in Windows when submitting transfers * Add timestamped logging * Add NetBSD support (experimental) and BSD libusb_get_device_speed() data * Add bootstrap.sh alongside autogen.sh (bootstrap.sh doesn't invoke configure) * Search for device nodes in /dev for Android support * Other bug fixes 2012-04-17: v1.0.10 * Public release * Add libusb_get_version * Add Visual Studio 2010 project files * Some Windows code cleanup * Fix xusb sample warnings ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ APPENDIX A - How to maintain code compatibility with versions of libusb and libusb that use MaxPower: If you must to maintain compatibility with versions of the library that aren't using the bMaxPower attribute in struct libusb_config_descriptor, the recommended way is to use the new LIBUSB_API_VERSION macro with an #ifdef. For instance, if your code was written as follows: if (dev->config[0].MaxPower < 250) Then you should modify it to have: #if defined(LIBUSB_API_VERSION) && (LIBUSB_API_VERSION >= 0x01000100) if (dev->config[0].bMaxPower < 250) #else if (dev->config[0].MaxPower < 250) #endif
jperkin
pushed a commit
that referenced
this pull request
Jan 17, 2016
* Disable debug library Changelog: Release 1.6.1 (2015-08-03) ========================== - added project and solution files for Visual Studio 2015 - upgraded bundled SQLite to 3.8.11.1 - fixed GH #782: Poco::JSON::PrintHandler not working for nested arrays - fixed GH #819: JSON Stringifier fails with preserve insert order - fixed GH #878: UUID tryParse - fixed GH #869: FIFOBuffer::read(T*, std::size_t) documentation inaccurate - fixed GH #861: Var BadCastException - fixed GH #779: BUG in 1.6.0 Zip code - fixed GH #769: Poco::Var operator== throws exception - fixed GH #766: Poco::JSON::PrintHandler not working for objects in array - fixed GH #763: Unable to build static with NetSSL_OpenSSL for OS X - fixed GH #750: BsonWriter::write<Binary::Ptr> missing size ? - fixed GH #741: Timestamp anomaly in Poco::Logger on WindowsCE - fixed GH #735: WEC2013 build fails due to missing Poco::Path methods. - fixed GH #722: poco-1.6.0: Unicode Converter Test confuses string and char types - fixed GH #719: StreamSocket::receiveBytes and FIFOBuffer issue in 1.6 - fixed GH #706: POCO1.6 Sample EchoServer BUG - fixed GH #646: Prevent possible data race in access to Timer::_periodicInerval - DeflatingStream: do not flush underlying stream on sync() as these can cause corrupted files in Zip archives Release 1.6.0 (2014-12-22) ========================== - fixed GH #625: MongoDB ensureIndex double insert? - fixed GH #622: Crypto: RSATest::testSign() should verify with public key only - fixed GH #620: Data documentation sample code outdated - fixed GH #618: OS X 10.10 defines PAGE_SIZE macro, conflicts with PAGE_SIZE in Thread_POSIX.cpp - fixed GH #616: Visual Studio warning C4244 - fixed GH #612: OpenSSLInitializer calls OPENSSL_config but not CONF_modules_free - fixed GH #608: (Parallel)SocketAcceptor ctor/dtor call virtual functions - fixed GH #607: Idle Reactor high CPU usage - fixed GH #606: HTMLForm constructor read application/x-www-form-urlencoded UTF-8 request body first parameter with BOM in name - fixed GH #596: For OpenSSL 1.0.1, include openssl/crypto.h not openssl/fips.h - fixed GH #592: Incorrect format string in Poco::Dynamic::Struct - fixed GH #590: Poco::Data::SQlite doesn't support URI filenames - fixed GH #564: URI::encode - fixed GH #560: DateTime class calculates a wrong day - fixed GH #549: Memory allocation is not safe between fork() and execve() - fixed GH #500: SSLManager causes a crash - fixed GH #490: 2 byte frame with payload length of 0 throws "Incomplete Frame Received" exception - fixed GH #483: multiple cases for sqlite_busy - fixed GH #482: Poco::JSON::Stringifier::stringify bad behaviour - fixed GH #478: HTTPCredentials not according to HTTP spec - fixed GH #471: vs2010 release builds have optimization disabled ? - fixed GH #468: HTTPClientSession/HTTPResponse not forwarding exceptions - fixed GH #438: Poco::File::setLastModified() doesn't work - fixed GH #402: StreamSocket::receiveBytes(FIFOBuffer&) and sendBytes(FIFOBuffer&) are not thread safe - fixed GH #345: Linker warning LNK4221 in Foundation for SignalHandler.obj, String.obj and ByteOrder.obj - fixed GH #331: Poco::Zip does not support files with ".." in the name. - fixed GH #318: Logger local time doesn't automatically account for DST - fixed GH #294: Poco::Net::TCPServerParams::setMaxThreads(int count) will not accept count == 0. - fixed GH #215: develop WinCE build broken - fixed GH #63: Net::NameValueCollection::size() returns int - Poco::Logger: formatting methods now support up to 10 arguments. - added Poco::Timestamp::raw() - Poco::DeflatingOutputStream and Poco::InflatingOutputStreams also flush underlying stream on flush()/sync(). - Poco::Util::Timer: prevent re-schedule of cancelled TimerTask - enabled WinRegistryKey and WinRegistryConfiguration for WinCE - Poco::BasicEvent improvements and preparations for future support of lambdas/std::function - upgraded bundled sqlite to 3.8.7.2 - Poco::Thread: added support for starting functors/lambdas - Poco::Net::HTTPClientSession: added support for global proxy configuration - added support for OAuth 1.0/2.0 via Poco::Net::OAuth10Credentials and Poco::Net::OAuth20Credentials classes. - Poco::Net::IPAddress: fixed IPv6 prefix handling issue on Windows - added Poco::Timestamp::TIMEVAL_MIN and Poco::Timestamp::TIMEVAL_MAX - added Poco::Clock::CLOCKVAL_MIN and Poco::Clock::CLOCKVAL_MAX - added poco_assert_msg() and poco_assert_msg_dbg() macros - Poco::Net::Context: fixed a memory leak if the CA file was not found while creating the Context object (the underlying OpenSSL context would leak) - Poco::URI: added new constructor to create URI from Path - Various documentation and style fixes - Removed support (project/solution files) for Visual Studio.NET 2003 and Visual Studio 2005. - Improved CMake support Release 1.5.4 (2014-10-14) ========================== - fixed GH #326: compile Net lib 1.5.2 without UTF8 support enabled - fixed GH #518: NetworkInterface.cpp compile error w/ POCO_NO_WSTRING (1.5.3) - Fixed MSVC 2010 warnings on large alignment - make HTTPAuthenticationParams::parse() add value on end of string - fixed GH #482: Poco::JSON::Stringifier::stringify bad behaviour - fixed GH #508: Can't compile for arm64 architecture - fixed GH #510: Incorrect RSAKey construction from istream - fix SharedMemory for WinCE/WEC2013 - Add NIOS2 double conversion detection, fixes compile errors - added VS2013 project/solution files for Windows Embedded Compact 2013 - added Process::isRunning() - NetSSL: Fix typo in documentation - NetSSL_OpenSSL: support for TLS 1.1 and 1.2 - Zip: Added CM_AUTO, which automatically selects CM_STORE or CM_DEFLATE based on file extension. Used to avoid double-compression of already compressed file formats such as images. - added %L modifier to PatternFormatter to switch to local time - removed unnecessary explicit in some multi-arg constructors - Allow SecureStreamSocket::attach() to be used in server connections - added Var::isBoolean() and fixed JSON stringifier - added poco_unexpected() macro invoking Bugcheck::unexpected() to deal with unexpected exceptions in destructors - fixed GH #538 prevent destructors from throwing exceptions - improved HTTP server handling of errors while reading header - fixed GH #545: use short for sign - upgraded SQLite to 3.8.6 - fixed GH #550 WebSocket fragmented message problem - improved HTTPClientSession handling of network errors while sending the request - updated bundled PCRE to 8.35.0 - fixed GH #552: FIFOBuffer drain() problem - fixed GH #402: StreamSocket::receiveBytes(FIFOBuffer&) and sendBytes(FIFOBuffer&) are not thread safe - HTTPCookie: fix documentation for max age - added Timestamp::raw() and Clock::raw() - Poco::Buffer properly handles zero-sized buffers - GH #512: Poco:Data:ODBC:Binder.h causes a crash - Added Crypto_Win and NetSSL_Win libraries which are re-implementations of existing Crypto and NetSSL_OpenSSL libraries based on WinCrypt/Schannel. The new libraries can be used as an almost drop-in replacement for the OpenSSL based libraries on Windows and Windows Embedded Compact platforms. Only available from GitHub for now. Release 1.5.3 (2014-06-30) ========================== - fixed GH# 316: Poco::DateTimeFormatter::append() gives wrong result for Poco::LocalDateTime - Poco::Data::MySQL: added SQLite thread cleanup handler - Poco::Net::X509Certificate: improved and fixed domain name verification for wildcard domains - added Poco::Clock class, which uses a system-provided monotonic clock (if available) and is thus not affected by system realtime clock changes. Monotonic Clock is available on Windows, Linux, OS X and on POSIX platforms supporting clock_gettime() and CLOCK_MONOTONIC. - Poco::Timer, Poco::Stopwatch, Poco::TimedNotificationQueue and Poco::Util::Timer have been changed to use Poco::Clock instead of Poco::Timestamp and are now unaffected by system realtime clock changes. - fixed GH# 350: Memory leak in Data/ODBC with BLOB - Correctly set MySQL time_type for Poco::Data::Date. - fixed GH #352: Removed redundant #includes and fixed spelling mistakes. - fixed setting of MYSQL_BIND is_unsigned value. - fixed GH #360: CMakeLists foundation: add Clock.cpp in the list of source files - Add extern "C" around <net/if.h> on HPUX platform. - added runtests.sh - fixed CPPUNIT_IGNORE parsing - fixed Glob from start path, for platforms not alowing transverse from root (Android) - added NTPClient (Rangel Reale) - added PowerShell build script - added SmartOS build support - fix warnings in headers - XMLWriter: removed unnecessary apostrophe escaping (&apos) - MongoDB: use Int32 for messageLength - fixed GH #380: SecureSocket+DialogSocket crashes with SIGSEGV when timeout occours - Improve RSADigestEngine, using Poco::Crypto::DigestEngine to calculate hash before signing - added Poco::PBKDF2Engine - Fixed GH #380: SecureSocket+DialogSocket crashes with SIGSEGV when timeout occours - added support for a 'Priority' attribute on cookies. - GH #386: fixed bug in MailMessage without content-transfer-encoding header - GH #384: ew hash algorithms support for RSADigestEngine - fixed Clock overflow bug on Windows - Poco::ByteOrder now uses intrinsics, if available - CMake: added /bigobj option for msvc - Fix typo to restore Net/TestSuite_x64_vs120 build - correct path for CONFIGURE_FILE in CMakeLists.txt - Building Poco 1.5.2 for Synology RS812+ (Intel Atom) (honor POCO_NO_INOTIFY) - added WEC2013 support to buildwin.cmd and buildwin.ps1 - HTMLForm: in URL encoding, percent-encode more characters - Fixed #include <linux/if.h> conflict with other libraries - Poco::Net::X509Certificate::verify() no longer uses DNS reverse lookups to validate host names - cert hostname validation is case insensitive and stricter for wildcard certificates - TCPServer: do not reduce the capacity of the default ThreadPool - added POCO_LOG_DEBUG flag - Zip: fixed a crash caused by an I/O error - added runtest script for windows - added SQlite Full Text Search support - added Thread::trySleep() and Thread::wakeUp() - fixed GH #410: Bug in JSON::Object.stringify() in 1.5.2 - fixed GH #362: Defect in Var::parseString when there is no space between value and newline - fixed GH #314: JSON parsing bug - added GH #313: MetaColumn additions for Data::ODBC and Data::SQLite - fixed GH #346: Make Poco::Data::Date and Poco::Data::Time compare functions const. - fixed GH #341: Compiling poco-1.5.2 for Cygwin - fixed GH #305: There are bugs in Buffer.h - fixed GH #321: trivial build fixes (BB QNX build) - fixed GH #440: MongoDB ObjectId string formatting - added SevenZip library (Guenter Obiltschnig) - fixed GH #442: Use correct prefix length field of Windows IP_ADAPTER_PREFIX structure - improved GH #328: NetworkInterface on Windows XP - fixed GH #154 Add support for MYSQL_TYPE_NEWDECIMAL to Poco::Data::MySQL - fixed GH #290: Unicode support - fixed GH #318: Logger local time doesn't automatically account for DST - fixed GH #363: DateTimeParser tryParse/parse - added HTMLForm Content-Length calculation (Rangel Reale) - Make TemporaryFile append a slash to tempDir - fixed GH #319 android build with cmake - added hasDelegates() method to AbstractEvent - fixed GH #230: Poco::Timer problem - fixed GH #317: Poco::Zip does not support newer Zip file versions. - fixed GH #176: Poco::JSON::Stringifier UTF encoding - fixed GH #458: Broadcast address and subnet mask for IEEE802.11 network interface - fixed GH #456: poco: library install dirs per RUNTIME/LIBRARY/ARCHIVE Release 1.5.2 (2013-09-16) ========================== - added MongoDB library - fixed GH #57: poco-1.5.1: Doesn't compile for Android - added VoidEvent (Arturo Castro) - fixed GH #80: NumberFormatter::append broken - fixed GH #93: ParallelSocketAcceptor virtual functions - optional small object optimization for IPAddress, SocketAddress, Any and Dynamic::Var - SQLite events (insert, update, delete, commit, rollback) handlers - merged GH #91: Improve SQLite multi-threaded use (Rangel Reale) - merged GH #86: Invalid pointers to vector internals (Adrian Imboden) - automatic library initialization macros - fixed GH #110: WebSocket accept() fails when Connection header contains multiple tokens - fixed GH #71: WebSocket and broken Timeouts (POCO_BROKEN_TIMEOUTS) - fixed a warning in Poco/Crypto/OpenSSLInitializer.h - fixed GH #109: Bug in Poco::Net::SMTPClientSession::loginUsingPlain - added clang libc++ build configurations for Darwin and iPhone (Andrea Bigagli) - fixed GH #116: Wrong timezone parsing in DateTimeParse (Matej Knopp) - fixed GH #118: JSON::Object::stringify endless loop - added Recursive and SortedDirectoryIterator (Marian Krivos) - added ListMap (map-like container with preserving insertion order) - MailMessage: attachments saving support and consistent read/write - fixed GH #124: Possible buffer overrun in Foundation/EventLogChannel - fixed GH #119: JSON::Object holds values in ordered map - added JSON::PrintHandler - renamed JSON::DefaultHandler to ParseHandler (breaking change!) - fixed GH #127: Eliminate -Wshadow warnings - fixed GH #79: Poco::Thread leak on Linux - fixed GH #61: static_md build configs for Crypto and NetSSL - fixed GH #130: prefer sysconf over sysctlbyname - fixed GH #131: no timezone global var on OpenBSD - fixed GH #102: Some subprojects don't have x64 solutions for VS 2010 - added GH #75: Poco::Uri addQueryParameter method - Poco::Environment::osDisplayName() now recognizes Windows 8/Server 2012 - fixed GH #140: Poco::Runnable threading cleanup issue - simplified default TCP/HTTPServer construction - fixed GH #141: Application::run() documentation/implementation discrepancy - changed RowFormatter to SharedPtr<RowFormatter> in Data::RecordSet interface (breaking change!) - fixed GH #144: Poco::Dynamic emits invalid JSON - removed naked pointers from Data interfaces - fixed GH #82: name conflict in Data::Keywords::bind - fixed GH #157: MySQL: cannot bind to 'long' data type on Windows/Visual C++ - fixed GH #158: MySQL: MYSQL_BIND 'is_unsigned' member is not set - fixed GH #160: MultipartReader ignores first part, if preamble is missing - fixed GH #156: Possible buffer overrun in Foundation/EventLogChannel - XML: fixed an issue with parsing a memory buffer > 2 GB - upgraded to expat 2.1.0 - Data/ODBC: added support for setting query timeout (via setProperty of "queryTimeout"). Timeout is int, given in seconds. - fixed a potential endless loop in SecureStreamSocketImpl::sendBytes() and also removed unnecessary code. - fixed GH #159: Crash in openssl CRYPTO_thread_id() after library libPocoCrypto.so has been unloaded. - fixed GH #155: MailOutputStream mangles consecutive newline sequences - fixed GH #139: FileChannel::PROP_FLUSH is invalid (contains a tab character) - fixed GH #173: HTTPClientSession::proxyConnect forces DNS lookup of host names - fixed GH #194: MessageNotification constructor is inefficient. - fixed GH #189: Poco::NumberParser::tryParse() documentation bug - fixed GH #172: IPv6 Host field is stripped of Brackets in HTTPClientSession - fixed GH #188: Net: SocketAddress operator < unusable for std::map key - fixed GH #128: DOMWriter incorrectly adds SYSTEM keyword to DTD if PUBLIC is already specified - fixed GH #65: Poco::format() misorders sign and padding specifiers - upgraded bundled SQLite to 3.7.17 - replaced JSON parser with Poco::Web::JSON parser (from sandbox) - added JSON conversion to Dynamic Struct and Array - added VarIterator - modified behavior of empty Var (empty == empty) - added Alignment.h header for C++03 alignment needs - added Data/WebNotifier (DB, WebSocket) example - fixed GH #209: Poco::NumberFormatter double length - fixed GH #204: Upgrade zlib to 1.2.8 - fixed GH #198: The "application.configDir" property is not always created. - fixed GH #185: Poco::NumberFormatter::format(double value, int precision) ignore precision == 0 - fixed GH #138: FreeBSD JSON tests fail - fixed GH #99: JSON::Query an JSON::Object - limited allowed types for JSON::Query to Object, Array, Object::Ptr, Array::Ptr and empty - fixed GH #175: HTMLForm does not read URL parameters on POST or PUT - added GH #187: MySQL: allow access to the underlying connection handle - added GH #186: MySQL: support for MYSQL_SECURE_AUTH - fixed GH #174: MySQL: 4GB allocated when reading any largetext or largeblob field - fixed a potential memory leak in Poco::Net::HTTPClientSession if it is misused (e.g., sendRequest() is sent two times in a row without an intermediate call to receiveResponse(), or by calling receiveResponse() two times in a row without an intermediate call to sendRequest()) - GH #217 - removed a few unnecessary protected accessor methods from Poco::Net::HTTPClientSession that would provide inappropriate access to internal state - merged GH #210: Don't call CloseHandle() twice on Windows; Ability to select the threadpool that will be used to start an Activity(Patrice Tarabbia) - fixed GH #212: JSONConfiguration was missing from the vs90 project(Patrice Tarabbia) - fixed GH #220: add qualifiers for FPEnvironment in C99 (Lucas Clemente) - fixed GH #222: HTTPCookie doesn't support expiry times in the past (Karl Reid) - fixed GH #224: building 1.5.1 on Windows for x64 - fixed GH# 233: ServerSocket::bind6(Poco::UInt16 port, bool reuseAddress, bool ipV6Only) does not work - fixed GH# 231: Compatibility issue with Poco::Net::NetworkInterface - fixed GH# 236: Bug in RecursiveDirectoryIterator - added ColorConsoleChannel and WindowsColorConsoleChannel classes supporting colorizing log messages - fixed GH# 259: Poco::EventLogChannel fails to find 64bit Poco Foundation dll - fixed GH# 254: UTF8::icompare unexpected behavior - Poco::UUID::tryParse() also accepts UUIDs without hyphens. Also updated documentation (links to specifications). - added GH# 268: Method to get JSON object value using Poco::Nullable - fixed GH# 267: JSON 'find' not returning empty result if object is expected but another value is found - Added support for ARM64 architecture and iPhone 5s 64-bit builds (POCO_TARGET_OSARCH=arm64). Release 1.5.1 (2013-01-11) ========================== - using double-conversion library for floating-point numeric/string conversions - added Poco::istring (case-insensitive string) and Poco::isubstr - added SQLite sys.dual (in-memory system table) - applied SF Patch #120: The ExpireLRUCache does not compile with a tuple as key on Visual Studio 2010 - fixed SF Bug #599: JSON::Array and JSON::Object size() member can implicitly lose precision - fixed SF Bug #602: iterating database table rows not correct if no data in table - fixed SF Bug #603: count() is missing in HashMap - fixed GH #23: JSON::Object::stringify throw BadCastException - fixed GH #16: NetworkInterface::firstAddress() should not throw on unconfigured interfaces - Android compile/build support (by Rangel Reale) - TypeHandler::prepare() now takes const-reference - fixed GH #27: Poco::URI::decode() doesn't properly handle '+' - fixed GH #31: JSON implementation bug - fixed SF #597: Configure script ignores cflags - fixed SF #593: Poco 1.5.0 on FreeBSD: cannot find -ldl - added SF #542: SocketAddress() needs port-only constructor - fixed SF #215: Wrong return type in SocketConnector.h - applied SF Patch #97: fix c++0x / clang++ bugs - fixed GH32/SF596: Poco::JSON: Parsing long integer (int64) value fails. - added Net ifconfig sample (contributed by Philip Prindeville) - merged GH #34: add algorithm header (Roger Meier/Philip Prindeville) - fixed GH #26: Cannot compile on gcc - merged SF #111: FTP Client logging (Marian Krivos) - fixed GH #30: Poco::Path::home() throws when called from Windows Service - fixed GH #22: MySQL connection string lowercased - added MySQL support for Date/Time - upgraded SQLite to version 3.7.15.1 (2012-12-19) - improved SQLite execute() return (affected rows) value and added tests - added SQLite::Utility::isThreadSafe() function - added SQLite::Utility::setThreadMode(int mode) function - fixed GH #36: 'distclean' requires 3 traversals of project tree - fixed GH #41: Buffer::resize crash - fixed GH #42: Linux unbundled builds don't link - fixed GH #44: Problems with win x64 build - fixed GH #46: 1.5.1 build fails on OS X when using libc++ - fixed GH #48: Need getArgs() accessor to Util::Application to retrieve start-up arguments - fixed GH #49: NetworkInterface::list doesn't return MAC addresses - fixed GH #51: Android should use isfinite, isinf, isnan and signbit from the std namespace - fixed GH #53: JSON unicode fixes and running tests on invalid unicode JSON - added ParallelAcceptor and ParallelReactor classes - added EOF and error to FIFOBuffer Release 1.5.0 (2012-10-14) ========================== - added JSON library - added Util::JSONConfiguration - added FIFOBuffer and FIFOBufferStream - fixed SF# 3522906: Unregistering handlers from SocketReactor - fixed SF# 3522084: AbstractConfiguration does not support 64-bit integers - HTTPServer::stopAll(): close the socket instead of just shutting it down, as the latter won't wake up a select() on Windows - added SMTPLogger - added cmake support - fixed SF#3538778: NetworkInterface enumeration uses deprecated API - fixed SF#3538779: IPAddress lacks useful constructors: from prefix mask, native SOCKADDR - fixed SF#3538780: SocketAddress needs operator < function - fixed SF#3538775: Issues building on Fedora/Centos, etc. for AMD64 - fixed SF#3538786: Use size_t for describing data-blocks in DigestEngine - added IPAddress bitwise operators (&,|,^,~) - added IPAddress BinaryReader/Writer << and >> operators - modified IPAddress to force IPv6 to lowercase (RFC 5952) - fixed SF#3538785: SMTPClientSession::sendMessage() should take recipient list - added IPAddress::prefixLength() - UTF portability improvements - fixed SF#3556186: Linux shouldn't use <net/if.h> in Net/SocketDefs.h - added IPAddress RFC 4291 compatible site-local prefix support - fixed SF#3012166: IPv6 patch - added SF#3558085: Add formatter to MACAddress object - fixed SF#3552774: Don't hide default target in subordinate makefile - fixed SF#3534307: Building IPv6 for Linux by default - fixed SF#3516844: poco missing symbols with external >=lipcre-8.13 - added SF#3544720: AbstractConfigurator to support 64bit values - fixed SF#3522081: WinRegistryConfiguration unable to read REG_QWORD values - fixed SF#3563626: For Win32 set Up/Running flags on NetworkInterface - fixed SF#3560807: Deprecate setPeerAddress() as this is now done in getifaddrs - fixed SF#3560776: Fix byte-ordering issues with INADDR_* literals - fixed SF#3563627: Set IP address on multicast socket from socket family - fixed SF#3563999: Size BinaryWriter based on buffer's capacity(), not size() - fixed SF#102 Fix building Poco on Debian GNU/kFreeBSD - fixed SF#321 Binding DatTime or Timestamp - fixed SF#307 Detect the SQL driver type at run time - added VS 2012 Projects/Solutions - enhanced and accelerated numeric parsing for integers and floats - fixed SF#590 Segfault on FreeBSD when stack size not rounded - added warn function and warnmsg macro in CppUnit - fixed SF# 3558012 Compilation fails when building with -ansi or -std=c++0x - fixed SF# 3563517 Get rid of loss-of-precision warnings on x64 MacOS - fixed SF#3562244: Portability fix for AF_LINK - fixed SF #3562400: DatagramSocketImpl comment is incorrect Release 1.4.7p1 (2014-11-25) ============================ - Fixed Visual C++ 2010-2013 project files. Release builds now have optimization enabled. - Poco::URI: added constructor to create URI from Path. - fixed GH #618: OS X 10.10 defines PAGE_SIZE macro, conflicts with PAGE_SIZE in Thread_POSIX.cpp - Poco::Net::HTTPClientSession: added support for global proxy configuration - fixed GH #331: Poco::Zip does not support files with .. in the name. - fixed a memory leak in Poco::Net::Context constructor when it fails to load the certificate or private key files. - upgraded bundled SQLite to 3.8.7.2 - fixed GH #229: added missing value() function - fixed GH #69: MySQL empty text/blob Release 1.4.7 (2014-10-06) ========================== - fixed GH #398: PropertyFileConfiguration: input != output - fixed GH #368: Build failure of Poco 1.4.6p2 on FreeBSD 9.2 - fixed GH #318: Logger local time doesn't automatically account for DST - fixed GH #317: Poco::Zip does not support newer Zip file versions. - fixed GH #454: Fix: handle unhandled exceptions - fixed GH #463: XML does not compile with XML_UNICODE_WCHAR_T - fixed GH #282: Using Thread in a global can cause crash on Windows - fixed GH #424: Poco::Timer deadlock - fixed GH #465: Fix result enum type XML_Error -> XML_Status - fixed GH #510: Incorrect RSAKey construction from istream - fixed GH #332: POCO::ConsoleChannnel::initColors() assigns no color to PRIO_TRACE and wrong color to PRIO_FATAL - fixed GH #550: WebSocket fragmented message problem - Poco::Data::MySQL: added SQLite thread cleanup handler - Poco::Net::X509Certificate: improved and fixed domain name verification for wildcard domains - fixed a crash in Foundation testsuite with Visual C++ 2012 - improved and fixed domain name verification for wildcard domains in Poco::Net::X509Certificate - updated TwitterClient sample to use new 1.1 API and OAuth - added Poco::Clock class, which uses a system-provided monotonic clock (if available) and is thus not affected by system realtime clock changes. Monotonic Clock is available on Windows, Linux, OS X and on POSIX platforms supporting clock_gettime() and CLOCK_MONOTONIC. - Poco::Timer, Poco::Stopwatch, Poco::TimedNotificationQueue and Poco::Util::Timer have been changed to use Poco::Clock instead of Poco::Timestamp and are now unaffected by system realtime clock changes. - added Poco::PBKDF2Engine class template - Poco::Net::HTTPCookie: added support for Priority attribute (backport from develop) - fixed makedepend.* scripts to work in paths containing '.o*' (contributed by Per-Erik Bjorkstad, Hakan Bengtsen) - Upgraded bundled SQLite to 3.8.6 - Support for Windows Embedded Compact 2013 (Visual Studio 2012) - Project and solution files for Visual Studio 2013 - Changes for C++11 compatibility. - fixed an issue with receiving empty web socket frames (such as ping) - improved error handling in secure socket classes - Poco::ByteOrder now uses intrinsics if available - added new text encoding classes: Latin2Encoding, Windows1250Encoding, Windows1251Encoding - Zip: Added CM_AUTO, which automatically selects CM_STORE or CM_DEFLATE based on file extension. Used to avoid double-compression of already compressed file formats such as images. Release 1.4.6p4 (2014-04-18) ============================ - no longer use reverse DNS lookups for cert hostname validation - cert hostname validation is case insensitive and more strict - HTMLForm: in URL encoding, percent-encode more special characters - fixed thread priority issues on POSIX platforms with non-standard scheduling policy - XMLWriter no longer escapes apostrophe character - fixed GH #316: Poco::DateTimeFormatter::append() gives wrong result for Poco::LocalDateTime - fixed GH #305 (memcpy in Poco::Buffer uses wrong size if type != char) - Zip: fixed a crash caused by an I/O error (e.g., full disk) while creating a Zip archive Release 1.4.6p3 (2014-04-02) ============================ - Fixed a potential security vulnerability in client-side X509 certificate verification. Release 1.4.6p2 (2013-09-16) ============================ - fixed GH #156: Possible buffer overrun in Foundation/EventLogChannel - XML: fixed an issue with parsing a memory buffer > 2 GB - upgraded to expat 2.1.0 - Data/ODBC: added support for setting query timeout (via setProperty of "queryTimeout"). Timeout is int, given in seconds. - fixed a potential endless loop in SecureStreamSocketImpl::sendBytes() and also removed unnecessary code. - fixed GH #159: Crash in openssl CRYPTO_thread_id() after library libPocoCrypto.so has been unloaded. - fixed GH #155: MailOutputStream mangles consecutive newline sequences - fixed GH# 139: FileChannel::PROP_FLUSH is invalid (contains a tab character) - fixed GH# 173: HTTPClientSession::proxyConnect forces DNS lookup of host names - fixed GH# 194: MessageNotification constructor is inefficient. - fixed GH# 189: Poco::NumberParser::tryParse() documentation bug - fixed GH# 172: IPv6 Host field is stripped of Brackets in HTTPClientSession - fixed GH# 188: Net: SocketAddress operator < unusable for std::map key - fixed GH# 128: DOMWriter incorrectly adds SYSTEM keyword to DTD if PUBLIC is already specified - fixed GH# 65: Poco::format() misorders sign and padding specifiers - upgraded bundled SQLite to 3.7.17 - upgraded bundled zlib to 1.2.8 - fixed a potential memory leak in Poco::Net::HTTPClientSession if it is misused (e.g., sendRequest() is sent two times in a row without an intermediate call to receiveResponse(), or by calling receiveResponse() two times in a row without an intermediate call to sendRequest()) - GH #217 - removed a few unnecessary protected accessor methods from Poco::Net::HTTPClientSession that would provide inappropriate access to internal state - fixed GH# 223 (Poco::Net::HTTPCookie does not support expiry times in the past) - fixed GH# 233: ServerSocket::bind6(Poco::UInt16 port, bool reuseAddress, bool ipV6Only) does not work - added ColorConsoleChannel and WindowsColorConsoleChannel classes supporting colorizing log messages - fixed GH# 259: Poco::EventLogChannel fails to find 64bit Poco Foundation dll - fixed GH# 254: UTF8::icompare unexpected behavior - Poco::UUID::tryParse() also accepts UUIDs without hyphens. Also updated documentation (links to specifications). - Added support for ARM64 architecture and iPhone 5s 64-bit builds (POCO_TARGET_OSARCH=arm64). Release 1.4.6p1 (2013-03-06) ============================ - fixed GH# 71: WebSocket and broken Timeouts (POCO_BROKEN_TIMEOUTS) - fixed an ambiguity error with VC++ 2010 in Data/MySQL testsuite - Poco::Net::NetworkInterface now provides the interface index even for IPv4 - added DNS::reload() as a wrapper for res_init(). - On Linux, Poco::Environment::nodeId() first always tries to obtain the MAC address of eth0, before looking for other interfaces. - Poco::Net::HTTPSession now always resets the buffer in connect() to clear any leftover data from a (failed) previous session - fixed copysign namespace issue in FPEnvironment_DUMMY.h - fixed a warning in Poco/Crypto/OpenSSLInitializer.h - added a build configuration for BeagleBoard/Angstrom - fixed GH# 109: Bug in Poco::Net::SMTPClientSession::loginUsingPlain) - fixed compile errors with clang -std=c++11 - fixed GH# 116: Wrong timezone parsing in DateTimeParse (fix by Matej Knopp) - updated bundled SQLite to 3.7.15.2 Release 1.4.6 (2013-01-10) ========================== - changed FPEnvironment_DUMMY.h to include <cmath> instead of <math.h> - updated bundled SQLite to 3.7.15.1 - fixed GH# 30: Poco::Path::home() throws - fixed SF Patch# 120 The ExpireLRUCache does not compile with a tuple as key on VS2010 - fixed SF# 603 count() is missing in HashMap - Crypto and NetSSL_OpenSSL project files now use OpenSSL *MD.lib library files for static_md builds. Previously, the DLL import libs were used. - Poco::Environment::osDisplayName() now recognizes Windows 8/Server 2012 Release 1.4.5 (2012-11-19) ========================== - added Visual Studio 2012 project files - buildwin.cmd now support building with msbuild for VS2010 and 2012. - added Poco::Optional class - fixed SF# 3558012 Compilation fails when building with -ansi or -std=c++0x - fixed SF# 3563517 Get rid of loss-of-precision warnings on x64 MacOS - fixed SF# 3562244: Portability fix for AF_LINK - fixed SF# 3562400: DatagramSocketImpl comment - fixed SF# 594: Websocket fails with small masked payloads - fixed SF# 588: Missing POCO_ARCH and POCO_ARCH_LITTLE_ENDIAN define for WinCE on SH4 - fixed SF# 581: Out-of-bound array access in Unicode::properties() function. - fixed SF# 590: Segfault on FreeBSD when stack size not rounded - fixed SF# 586: Poco::DateTimeParser and ISO8601 issues when seconds fraction has more than 6 digits - Poco::Net::HTTPSSessionInstantiator::registerInstantiator() now optionally accepts a Poco::Net::Context object. - added Poco::XML::XMLWriter::depth() member function. - added Poco::XML::XMLWriter::uniquePrefix() and Poco::XML::XMLWriter::isNamespaceMapped(). - Poco::FileChannel now supports a new rotateOnOpen property (true/false) which can be used to force rotation of the log file when it's opened. - fixed a bug in Poco::XML::XMLWriter::emptyElement(): need to pop namespace context - OS X builds now use Clang as default compiler - Updated SQLite to 3.7.14.1 - POCO_SERVER_MAIN macro now has a try ... catch block for Poco::Exception and writes the displayText to stderr. - Poco/Platform.h now defines POCO_LOCAL_STATIC_INIT_IS_THREADSAFE macro if the compiler generates thread-safe static local initialization code. Release 1.4.4 (2012-09-03) ========================== - ZipStream now builds correctly in unbundled build. - added proxy digest authentication support to Net library - integrated MySQL BLOB fixes from Franky Braem. - use standard OpenSSL import libraries (libeay32.lib, ssleay32.lib) for Crypto and NetSSL_OpenSSL Visual Studio project files. - fixed a potential buffer corruption issue in Poco::Net::SecureStreamSocket if lazy handshake is enabled and the first attempt to complete the handshake fails - Poco::DateTimeParser::tryParse() without format specifier now correctly parses ISO8601 date/times with fractional seconds. - Poco::Process::launch() now has additional overloads allowing to specify an initial directory and/or environment. - Poco::Net::FTPClientSession: timeout was not applied to data connection, only to control connection. - Fixed potential IPv6 issue with socket constructors if IPv6 SocketAddress is given (contributed by ??????? ????????? <milovidov@yandex-team.ru>). - Added an additional (optional) parameter to Poco::Thread::setOSPriority() allowing to specify a scheduling policy. Currently this is only used on POSIX platforms and allows specifying SCHED_OTHER (default), SCHED_FIFO or SCHED_RR, as well as other platform-specific policy values. - Added Poco::Crypto::DigestEngine class providing a Poco::DigestEngine interface to the digest algorithms provided by OpenSSL. - Fixed some potential compiler warnings in Crypto library - In some cases, when an SSL exception was unexpectedly closed, a generic Poco::IOException was thrown. This was fixed to throw a SSLConnectionUnexpectedlyClosedException instead. - Added Poco::ObjectPool class template. - Poco::Net::HTTPServer has a new stopAll() method allowing stopping/aborting of all currently active client connections. - The HTTP server framework now actively prevents sending a message body in the response to a HEAD request, or in case of a 204 No Content or 304 Not Modified response status. - fixed a DOM parser performance bug (patch by Peter Klotz) - fixed SF# 3559325: Util Windows broken in non-Unicode - updated iOS build configuration to use xcode-select for finding toolchain - Poco::Net::SecureSocketImpl::shutdown() now also shuts down the underlying socket. - fixed SF# 3552597: Crypto des-ecb error - fixed SF# 3550553: SecureSocketImpl::connect hangs - fixed SF# 3543047: Poco::Timer bug for long startInterval/periodic interval - fixed SF# 3539695: Thread attributes should be destroyed using the pthread_attr_destroy() - fixed SF# 3532311: Not able to set socket option on ServerSocket before bind Added Poco::Net::Socket::init(int af) which can be used to explicitely initialize the underlying socket before calling bind(), connect(), etc. - fixed SF# 3521347: Typo in UnWindows.h undef - fixed SF# 3519474: WinRegistryConfiguration bug Also added tests and fixed another potential issue with an empty root path passed to the constructor. - fixed SF# 3516827: wrong return value of WinRegistryKey::exists() - fixed SF# 3515284: RSA publickey format(X.509 SubjectPublicKeyInfo) - fixed SF# 3503267: VxWorks OS prio is not set in standard constructor - fixed SF# 3500438: HTTPResponse failure when reason is empty - fixed SF# 3495656: numberformater, numberparser error in mingw - fixed SF# 3496493: Reference counting broken in TaskManager postNotification - fixed SF# 3483174: LogFile flushing behavior on Windows Flushing is now configurable for FileChannel and SimpleFileChannel using the "flush" property (true or false). - fixed SF# 3479561: Subsequent IPs on a NIC is not enumerated - fixed SF# 3478665: Permission checks in Poco::File not correct for root - fixed SF# 3475050: Threading bug in initializeNetwork() on Windows - fixed SF# 3552680: websocket small frames bug and proposed fix - fixed a WebSocket interop issue with Firefox - added Poco::Net::MessageHeader::hasToken() - Poco::AtomicCounter now uses GCC 4.3 builtin atomics on more platforms - fixed SF# 3555938: NetSSL: socket closed twice - socket exceptions now include OS error code - fixed SF# 3556975: Need to fix Shared Memory for memory map - Poco::Net::SecureSocketImpl::close() now catches exceptions thrown by its call to shutdown(). - fixed SF# 3535990: POCO_HAVE_IPv6 without POCO_WIN32_UTF8 conflict - fixed SF# 3559665: Poco::InflatingInputStream may not always inflate completely - added Poco::DirectoryWatcher class - fixed SF# 3561464: Poco::File::isDevice() can throw due to sharing violation - Poco::Zip::Compress::addRecursive() has a second variant that allows to specify the compression method. - Upgraded internal SQLite to 3.7.14 Release 1.4.3p1 (2012-01-23) ============================ - fixed SF# 3476926: RegDeleteKeyEx not available on Windows XP 32-bit Release 1.4.3 (2012-01-16) ========================== - fixed a compilation error with Data/MySQL on QNX. - fixed Util project files for WinCE (removed sources not compileable on CE) - removed MD2 license text from Ackowledgements document - fixed iPhone build config for Xcode 4.2 (compiler name changed to llvm-g++) - Poco::Util::XMLConfiguration: delimiter char (default '.') is now configurable. This allows for working with XML documents having element names with '.' in them. - Poco::Util::OptionProcessor: Required option arguments can now be specified as separate command line arguments, as in "--option value" in addition to the "--option=value" format. - Poco::Util::HelpFormatter: improved option help formatting if indentation has been set explicitely. - added Mail sample to NetSSL_OpenSSL, showing use of Poco::Net::SecureSMTPClientSession. - added additional read() overloads to Poco::Net::HTMLForm. - fixed SF# 3440769: Poco::Net::HTTPResponse doesn't like Amazon EC2 cookies. - added support for requiring TLSv1 to Poco::Net::Context. - added an additional constructor to Poco::Net::HTTPBasicCredentials, allowing the object to be created from a string containing a base64-encoded, colon-separated username and password. - Poco::Zip::ZipStreamBuf: fixed a crash if CM_STORE was used. - Added setContentLength64() and getContentLength64() to Poco::Net::HTTPMessage. - added Poco::Environment::osDisplayName(). - fixed SF# 3463096: WinService leaves dangling handles (open() now does not reopen the service handle if it's already open) - fixed SF# 3426537: WinRegistryConfiguration can't read virtualized keys - added Poco::Buffer::resize() - fixed SF# 3441822: thread safety issue in HTTPClientSession: always use getaddrinfo() instead of gethostbyname() on all platforms supporting it - added version resource to POCO DLLs - fixed SF# 3440599: Dir Path in Quotes in PATH cause PathTest::testFind to fail. - fixed SF# 3406030: Glob::collect problem - added Poco::Util::AbstractConfiguration::enableEvents() - Poco::AtomicCounter now uses GCC builtins with GCC 4.1 or newer (contributed by Alexey Milovidov) - made Poco::Logger::formatDump() public as it may be useful for others as well (SF# 3453446) - Poco::Net::DialogSocket now has a proper copy constructor (SF# 3414602) - Poco::Net::MessageHeader and Poco::Net::HTMLForm now limit the maximum number of fields parsed from a message to prevent certain kinds of denial-of-service attacks. The field limit can be changed with the new method setFieldLimit(). The default limit is 100. - Poco::NumberFormatter, Poco::NumberParser and Poco::format() now always use the classic ("C") locale to format and parse floating-point numbers. - added Poco::StreamCopier::copyStream64(), Poco::StreamCopier::copyStreamUnbuffered64() and Poco::StreamCopier::copyToString64(). These functions use a 64-bit integer to count the number of bytes copied. - upgraded internal zlib to 1.2.5 - upgraded internal sqlite to 3.7.9 - XML: integrated bugfix for Expat bug# 2958794 (memory leak in poolGrow) - Added support for HTTP Digest authentication (based on a contribution by Anton V. Yabchinskiy (arn at bestmx dot ru)). For information on how to use this, see the Poco::Net::HTTPCredentials, Poco::Net::HTTPDigestCredentials and Poco::Net::HTTPAuthenticationParams classes. - Poco::Net::HTTPStreamFactory and Poco::Net::HTTPSStreamFactory now support Basic and Digest authentication. Username and password must be provided in the URI. - added Poco::Net::WebSocket, supporting the WebSocket protocol as described in RFC 6455 - NetSSL_OpenSSL: added client-side support for Server Name Indication. Poco::Net::SecureSocketImpl::connectSSL() now calls SSL_set_tlsext_host_name() if its available (OpenSSL 9.8.6f and later). - added Poco::Net::HTTPClientSession::proxyConnect() (factored out from Poco::Net::HTTPSClientSession::connect()) - added Poco::Process::kill(const Poco::ProcessHandle&) which is preferable to kill(pid) on Windows, as process IDs on Windows may be reused. - fixed SF# 3471463: Compiler warnings with -Wformat - Poco::Util::Application::run() now catches and logs exceptions thrown in initialize() - Fixed a WinCE-specific bug in Poco::Util::ServerApplication where uninitialize() would be called twice. - fixed SF# 3471957: WinRegistryKey::deleteKey() unable to delete alt views - Added additional constructor to Poco::ScopedLock and Poco::ScopedLockWithUnlock accepting a timeout as second argument. - Added Poco::Logger::parseLevel() - Poco::format(): an argument that does not match the format specifier no longer results in a BadCastException. The string [ERRFMT] is written to the result string instead. - PageCompiler: added createSession page attribute.
mamash
pushed a commit
that referenced
this pull request
Apr 6, 2016
v2.1 - Issue #156 parsedatetime 2.0 doesn't work on py26 v2.0 - Issue #155 Relative times containing years fail when computed from a leap day - Issue #145 cal.parse('2015-11-18') returns November 19th 2015 - Issue #143 What is the second value returned by `parse`? - Issue #141 Bad test case in TestComplexDateTimes - Issue #123 update supporting files for v2.0 release - Issue #124 Put locales into config-files (yaml) - Issue #125 Remove extra files - Issue #137 Year is parsed wrongly if the date is of format MMM DD, YYxx xx:SS bug - Issue #136 Why I see 2016 instead of 2015? - Issue #133 Bug: "2015-01-01" is parsed as the current date. - Issue #126 "Unresolved attribute reference 'parse' for class 'object'... " in Pycharm IDE. bug - Issue #120 the pdt_locales/en_AU.py file uses en_A for the localID instead of en_AU - Issue #114 Dates in the format 'YYYY-MM-DD HH:MM' give the incorrect month and day - Issue #112 Document getting a time from parsedatetime into a standard Python structure - Issue #110 AttributeError when running in the context of an HTTP request - Issue #109 YearParseStyle is ignored for dates in MM/DD style - Issue #107 yyyy/mm/dd date format - Issue #105 "this week" is not parsed - Issue #103 get UTC times from parseDT - trouble with at 9:30 clock times being interpreted directly in UTC - Issue #100 Fractional deltas result in incoherent results. - PR #118 ADD: improve russian locale - PR #117 ADD: Russian Locale - PR #116 Fix spelling of "separator". - PR #115 Update README.rst - PR #113 Add datetime example to readme. - PR #111 Allowed real number appear in text like "5.5 days ago" v1.5 - Issue #99 Which year is implied when given just a month and day? Next and last? question - Issue #96 Word boundary issues for specials (on, at, in) in nlp - Issue #94 inconsistent application of sourceTime in Calendar.parseDT - Issue #87 nlp() doesn't recognize some "next ..." expressions - Issue #84 Afternoon? bug - Issue #82 'last week' and 'next week' are broken - Issue #81 parse returns default time of 0900 with dates like 'next friday' despite passed struct_time bug - Issue #78 Link for Travis in README is wrong - Issue #72 Enable travis - Issue #71 Calendar() class can not be initialized 1.4 (it's fine) - Issue #66 Unexpected struct_time flag with Calendar.parse on HTML <a href> string - Issue #65 NLP false positives - Issue #63 Supporting multiple shortweekday abbreviations - Issue #61 Short weekday abbreviations bug - Issue #56 Parse words to numbers (thirteen => 13) - Issue #54 testMonths fails - commit 107c7e4655 fix for issue 95 - parsing 'next june 15' - commit 2c0c8ec778 Fixed faulty test, "730am" parses as "73:0 am" which is a bug for a later day. - commit 6f244e891d Fix "ones" parsing as "1s." Require a word boundary between spelled numbers and units. - commit 035818edef Fix "1 day ago" parsing like "1d 1y ago" where "a" within the word "day" is interpreted as 1. - commit 45002e6eec Fixes "next week" and similar modifier + unit pairs in nlp() - commit 47d2e1d527 Fixed "last week" v1.4 - Updated setup.py for wheel compatibility - renamed README.txt to README.rst - renamed MANIFEST to MANIFEST.in - cleaned up a lot of the doc and notes - Commit 3fc165e701 mafagafo Now it works for Python 3.4.1 - Commit d5883801e7 borgstrom Restore Python 2.6 compatibility 1.3 - Issue #45 make a new release to really fix backwards compatibility - Issue #43 Please tag version 1.3 - Commit 29c5c8961d devainandor fixed Python 3 compatibility in pdtLocale_icu - Commit d7304f18f7 inean Fix support for 'now' when no modifiers are present - Commit 26bfc91c28 sashaacker Added parseDT method. - Commit 848deb47e2 rmecham Added support for dotted meridians. - Commit c821e08ce2 ccho-sevenrooms corrected misspelling of 'thirteen' - Biggest change is the addition of the nlp() function by Geoffrey Floyd: nlp() function that utilizes parse() after making judgements about what datetime information belongs together. It makes logical groupings based on proximity and returns a parsed datetime for each matched grouping of datetime text, along with location info within the given inputString.
jperkin
pushed a commit
that referenced
this pull request
Apr 7, 2016
v2.1 - Issue #156 parsedatetime 2.0 doesn't work on py26 v2.0 - Issue #155 Relative times containing years fail when computed from a leap day - Issue #145 cal.parse('2015-11-18') returns November 19th 2015 - Issue #143 What is the second value returned by `parse`? - Issue #141 Bad test case in TestComplexDateTimes - Issue #123 update supporting files for v2.0 release - Issue #124 Put locales into config-files (yaml) - Issue #125 Remove extra files - Issue #137 Year is parsed wrongly if the date is of format MMM DD, YYxx xx:SS bug - Issue #136 Why I see 2016 instead of 2015? - Issue #133 Bug: "2015-01-01" is parsed as the current date. - Issue #126 "Unresolved attribute reference 'parse' for class 'object'... " in Pycharm IDE. bug - Issue #120 the pdt_locales/en_AU.py file uses en_A for the localID instead of en_AU - Issue #114 Dates in the format 'YYYY-MM-DD HH:MM' give the incorrect month and day - Issue #112 Document getting a time from parsedatetime into a standard Python structure - Issue #110 AttributeError when running in the context of an HTTP request - Issue #109 YearParseStyle is ignored for dates in MM/DD style - Issue #107 yyyy/mm/dd date format - Issue #105 "this week" is not parsed - Issue #103 get UTC times from parseDT - trouble with at 9:30 clock times being interpreted directly in UTC - Issue #100 Fractional deltas result in incoherent results. - PR #118 ADD: improve russian locale - PR #117 ADD: Russian Locale - PR #116 Fix spelling of "separator". - PR #115 Update README.rst - PR #113 Add datetime example to readme. - PR #111 Allowed real number appear in text like "5.5 days ago" v1.5 - Issue #99 Which year is implied when given just a month and day? Next and last? question - Issue #96 Word boundary issues for specials (on, at, in) in nlp - Issue #94 inconsistent application of sourceTime in Calendar.parseDT - Issue #87 nlp() doesn't recognize some "next ..." expressions - Issue #84 Afternoon? bug - Issue #82 'last week' and 'next week' are broken - Issue #81 parse returns default time of 0900 with dates like 'next friday' despite passed struct_time bug - Issue #78 Link for Travis in README is wrong - Issue #72 Enable travis - Issue #71 Calendar() class can not be initialized 1.4 (it's fine) - Issue #66 Unexpected struct_time flag with Calendar.parse on HTML <a href> string - Issue #65 NLP false positives - Issue #63 Supporting multiple shortweekday abbreviations - Issue #61 Short weekday abbreviations bug - Issue #56 Parse words to numbers (thirteen => 13) - Issue #54 testMonths fails - commit 107c7e4655 fix for issue 95 - parsing 'next june 15' - commit 2c0c8ec778 Fixed faulty test, "730am" parses as "73:0 am" which is a bug for a later day. - commit 6f244e891d Fix "ones" parsing as "1s." Require a word boundary between spelled numbers and units. - commit 035818edef Fix "1 day ago" parsing like "1d 1y ago" where "a" within the word "day" is interpreted as 1. - commit 45002e6eec Fixes "next week" and similar modifier + unit pairs in nlp() - commit 47d2e1d527 Fixed "last week" v1.4 - Updated setup.py for wheel compatibility - renamed README.txt to README.rst - renamed MANIFEST to MANIFEST.in - cleaned up a lot of the doc and notes - Commit 3fc165e701 mafagafo Now it works for Python 3.4.1 - Commit d5883801e7 borgstrom Restore Python 2.6 compatibility 1.3 - Issue #45 make a new release to really fix backwards compatibility - Issue #43 Please tag version 1.3 - Commit 29c5c8961d devainandor fixed Python 3 compatibility in pdtLocale_icu - Commit d7304f18f7 inean Fix support for 'now' when no modifiers are present - Commit 26bfc91c28 sashaacker Added parseDT method. - Commit 848deb47e2 rmecham Added support for dotted meridians. - Commit c821e08ce2 ccho-sevenrooms corrected misspelling of 'thirteen' - Biggest change is the addition of the nlp() function by Geoffrey Floyd: nlp() function that utilizes parse() after making judgements about what datetime information belongs together. It makes logical groupings based on proximity and returns a parsed datetime for each matched grouping of datetime text, along with location info within the given inputString.
jperkin
pushed a commit
that referenced
this pull request
May 3, 2016
---------------------------------------------
20160315 Tue Mar 15 16:21:33 PDT 2016
Promoted to full release
20160310.2049_001 Thu Mar 10 20:49:00 PST 2016
Docs
* Fix broken link in POD
[github #120] (thanks Manwar)
Distribution Fixes
* Generate README from POD
[github #122/#123/#124] (thanks jluis)
* Silence bogus Kwalitee failure
[github #121] (thanks jluis)
20151120.1519_001 Fri Nov 20 15:19:44 PST 2015
Bug Fixes
* Fix missing semi-colon
[github #118] (thanks joenio)
Distribution Fixes
* Bump required version of Lexical::SealRequireHints to fix RT #93759
[github #119] (thanks chorny)
jperkin
pushed a commit
that referenced
this pull request
Aug 24, 2016
2.3.1 (2016-08-07) ------------------ * Fixed regression causing spurious errors when xdist was used. See `#124 <https://github.com/pytest-dev/pytest-cov/issues/124>`_. * Fixed DeprecationWarning about incorrect `addoption` use. Contributed by Florian Bruhin in `PR#127 <https://github.com/pytest-dev/pytest-cov/pull/127>`_. * Fixed deprecated use of funcarg fixture API. Contributed by Daniel Hahler in `PR#125 <https://github.com/pytest-dev/pytest-cov/pull/125>`_. 2.3.0 (2016-07-05) ------------------ * Add support for specifying output location for html, xml, and annotate report. Contributed by Patrick Lannigan in `PR#113 <https://github.com/pytest-dev/pytest-cov/pull/113>`_. * Fix bug hiding test failure when cov-fail-under failed. * For coverage >= 4.0, match the default behaviour of `coverage report` and error if coverage fails to find the source instead of just printing a warning. Contributed by David Szotten in `PR#116 <https://github.com/pytest-dev/pytest-cov/pull/116>`_. * Fixed bug occurred when bare ``--cov`` parameter was used with xdist. Contributed by Michael Elovskikh in `PR#120 <https://github.com/pytest-dev/pytest-cov/pull/120>`_. * Add support for ``skip_covered`` and added ``--cov-report=term-skip-covered`` command line options. Contributed by Saurabh Kumar in `PR#115 <https://github.com/pytest-dev/pytest-cov/pull/115>`_.
jperkin
pushed a commit
that referenced
this pull request
Sep 20, 2016
--------------------------------------- cmark 0.26.1 @jgm jgm released this Jul 16, 2016 . 18 commits to master since this release * Removed unnecessary typedef that caused build failure on some platforms. * Use $(MAKE) in Makefile instead of hardcoded make (#146, Tobias Kortkamp). cmark 0.26.0 @jgm jgm released this Jul 15, 2016 . 23 commits to master since this release * Implement spec changes for list items: + Empty list items cannot interrupt paragraphs. + Ordered lists cannot interrupt paragraphs unless they start with 1. + Removed "two blank lines break out of a list" feature. * Fix sourcepos for blockquotes (#142). * Fix sourcepos for atx headers (#141). * Fix ATX headers and thematic breaks to allow tabs as well as spaces. * Fix chunk_set_cstr with suffix of current string (#139, Nick Wellnhofer). It's possible that cmark_chunk_set_cstr is called with a substring (suffix) of the current string. Delay freeing of the chunk content to handle this case correctly. * Export targets on installation (Jonathan M?ller). This allows using them in other cmake projects. * Fix cmake warning about CMP0048 (Jonathan M?ller). * commonmark renderer: Ensure we don't have a blank line before a code block when it's the first thing in a list item. * Change parsing of strong/emph in response to spec changes. process_emphasis now gets better results in corner cases. The change is this: when considering matches between an interior delimiter run (one that can open and can close) and another delimiter run, we require that the sum of the lengths of the two delimiter runs mod 3 is not 0. * Ported Robin Stocker's changes to link parsing in commonmark/commonmark-spec#101. This uses a separate stack for brackets, instead of putting them on the delimiter stack. This avoids the need for looking through the delimiter stack for the next bracket. * cmark_reference_lookup: Return NULL if reference is null string. * Fix character type detection in commonmark.c (Nick Wellnhofer). Fixes test failures on Windows and undefined behavior. + Implement cmark_isalpha. + Check for ASCII character before implicit cast to char. + Use internal ctype functions in commonmark.c. * Better documentation of memory-freeing responsibilities. in cmark.h and its man page (#124). * Use library functions to insert nodes in emphasis/link processing. Previously we did this manually, which introduces many places where errors can creep in. * Correctly handle list marker followed only by spaces. Previously when a list marker was followed only by spaces, cmark expected the following content to be indented by the same number of spaces. But in this case we should treat the line just like a blank line and set list padding accordingly. * Fixed a number of issues relating to line wrapping. + Extend CMARK_OPT_NOBREAKS to all renderers and add --nobreaks. + Do not autowrap, regardless of width parameter, if CMARK_OPT_NOBREAKS is set. + Fixed CMARK_OPT_HARDBREAKS for LaTeX and man renderers. + Ensure that no auto-wrapping occurs if CMARK_OPT_NOBREAKS is enabled, or if output is CommonMark and CMARK_OPT_HARDBREAKS is enabled. * Set stdin to binary mode on Windows (Nick Wellnhofer, #113). This fixes EOLs when reading from stdin. * Add library option to render softbreaks as spaces (Pavlo Kapyshin). Note that the NOBREAKS option is HTML-only * renderer: no_linebreaks instead of no_wrap. We generally want this option to prohibit any breaking in things like headers (not just wraps, but softbreaks). * Coerce realurllen to int. This is an alternate solution for pull request # 132, which introduced a new warning on the comparison (Benedict Cohen). * Remove unused variable link_text (Mathiew Duponchelle). * Improved safety checks in buffer (Vicent Marti). * Add new interface allowing specification of custom memory allocator for nodes (Vicent Marti). Added cmark_node_new_with_mem, cmark_parser_new_with_mem, cmark_mem to API. * Reduce storage size for nodes by using bit flags instead of separate booleans (Vicent Marti). * config: Add SSIZE_T compat for Win32 (Vicent Marti). * cmake: Global handler for OOM situations (Vicent Marti). * Add tests for memory exhaustion (Vicent Marti). * Document in man page and public header that one should use the same memory allocator for every node in a tree. * Fix ctypes in Python FFI calls (Nick Wellnhofer). This didn't cause problems so far because all types are 32-bit on 32-bit systems and arguments are passed in registers on x86-64. The wrong types could cause crashes on other platforms, though. * Remove spurious failures in roundtrip tests. In the commonmark writer we separate lists, and lists and indented code, using a dummy HTML comment. So in evaluating the round-trip tests, we now strip out these comments. We also normalize HTML to avoid issues having to do with line breaks. * Add 2016 to copyright (Kevin Burke). * Added to_commonmark in test/cmark.py (for round-trip tests). * spec_test.py - parameterize do_test with converter. * spec_tests.py: exit code is now sum of failures and errors. This ensures that a failing exit code will be given when there are errors, not just with failures. * Fixed round trip tests. Previously they actually ran cmark instead of the round-trip version, since there was a bug in setting the ROUNDTRIP variable (#131). * Added new roundtrip_tests.py. This replaces the old use of simple shell scripts. It is much faster, and more flexible. (We will be able to do custom normalization and skip certain tests.) * Fix tests under MinGW (Nick Wellnhofer). * Fix leak in api_test (Mathieu Duponchelle). * Makefile: have leakcheck stop on first error instead of going through all the formats and options and probably getting the same output. * Add regression tests (Nick Wellnhofer). cmark 0.25.2 @jgm jgm released this Mar 26, 2016 . 114 commits to master since this release * Open files in binary mode (#113, Nick Wellnhofer). Now that cmark supports different line endings, files must be openend in binary mode on Windows. * Reset partially_consumed_tab on every new line (#114, Nick Wellnhofer). * Handle buffer split across a CRLF line ending (#117). Adds an internal field to the parser struct to keep track of last_buffer_ended_with_cr. Added test. cmark 0.25.1 @jgm jgm released this Mar 25, 2016 . 122 commits to master since this release * Release with no code changes. cmark version was mistakenly set to 0.25.1 in the 0.25.0 release (#112), so this release just ensures that this will cause no confusion later. cmark 0.25.0 @jgm jgm released this Mar 25, 2016 . 124 commits to master since this release * Fixed tabs in indentation (#101). This patch fixes S_advance_offset so that it doesn't gobble a tab character when advancing less than the width of a tab. * Added partially_consumed_tab to parser. This keeps track of when we have gotten partway through a tab when consuming initial indentation. * Simplified add_line (only need parser parameter). * Properly handle partially consumed tab. E.g. in - foo <TAB><TAB>bar we should consume two spaces from the second tab, including two spaces in the code block. * Properly handle tabs with blockquotes and fenced blocks. * Fixed handling of tabs in lists. * Clarified logic in S_advance_offset. * Use an assertion to check for in-range html_block_type. It's a programming error if the type is out of range. * Refactored S_processLines to make the logic easier to understand, and added documentation (Mathieu Duponchelle). * Removed unnecessary check for empty string_content. * Factored out contains_inlines. * Moved the cmake minimum version to top line of CMakeLists.txt (tinysun212). * Fix ctype(3) usage on NetBSD (Kamil Rytarowski). We need to cast value passed to isspace(3) to unsigned char to explicitly prevent possibly undefined behavior. * Compile in plain C mode with MSVC 12.0 or newer (Nick Wellnhofer). Under MSVC, we used to compile in C++ mode to get some C99 features like mixing declarations and code. With newer MSVC versions, it's possible to build in plain C mode. * Switched from "inline" to "CMARK_INLINE" (Nick Wellnhofer). Newer MSVC versions support enough of C99 to be able to compile cmark in plain C mode. Only the "inline" keyword is still unsupported. We have to use "__inline" instead. * Added include guards to config.h * config.h.in - added compatibility snprintf, vsnprintf for MSVC. * Replaced sprintf with snprintf (Marco Benelli). * config.h: include stdio.h for _vscprintf etc. * Include starg.h when needed in config.h. * Removed an unnecessary C99-ism in buffer.c. This helps compiling on systems like luarocks that don't have all the cmake configuration goodness (thanks to carlmartus). * Don't use variable length arrays (Nick Wellnhofer). They're not supported by MSVC. * Test with multiple MSVC versions under Appveyor (Nick Wellnhofer). * Fix installation dir of man-pages on NetBSD (Kamil Rytarowski). * Fixed typo in cmark.h comments (Chris Eidhof). * Clarify in man page that cmark_node_free frees a node's children too. * Fixed documentation of --width in man page. * Require re2c >= 1.14.2 (#102). * Generated scanners.c with more recent re2c. (pkgsrc changes) - Drop two patches accepted to upstream
jperkin
pushed a commit
that referenced
this pull request
Oct 18, 2016
## 1.4.3 20160821 * Quick fix of install failures. Do not try to use install 1.4.2. ## 1.4.2 20160820 * Refine SSL examples. * Address issue #124 with additional RDOC. * spec for Stomp::Client - check that headers passed to connection contain required values as well as given custom and that given hash is not modified. * Stomp::Client now does not modify given headers hash * spec description enhancement. * fix build_subscription_id - symbol and string were mixed up. * STOMP_TESTSSL flag should enable all SSL tests. * Add a basic Gemfile. * Fix a memory leak in receipt implementation. * Add unit test helper script. ## 1.4.1 20160623 * Add call to #post_connection_check to normal SSL processing. This change further validates the name of the broker connected to. This change adds to the current SSL connection processing logic, and is **highly recommended**. In the case a client cannot tolerate this logic, it can be disabled by adding :ssl_post_conn_check => false to the connection hash. * Fix typo in SSL failure recovery processing. ## 1.4.0 20160608 * Connection parameter :parse_timeout now means IO:select wait time for socket reads. Consumer clients should see a significantly reduced memory footprint. If the default (5 seconds) is not used by your client, we suggest you test carefully. * Add example programs for sending / receiving large messages. * Changelog format is changed from .rdoc to .md. * README format is changed from .rdoc to .md. * README format change of contributor's list. * Add example utilities for generating the contributor's list. * Eliminate many warnings when using 'rake test', mostly from the 2.x Ruby series. * Get rakefile up to date. * Add the 'adhoc' subdirectory, an area for experiments and issue recreation code.
jperkin
pushed a commit
that referenced
this pull request
Dec 27, 2016
Remove BROKEN mark(build without Internet access) Upstream changes: ## 1.1.2 (2016-09-30) **CRAN** * [BUGFIX] round(), snprintf() is not C++98 ------------------------------------------------------------------------------- ## 1.1.1 (2016-05-25) **CRAN** * [BUGFIX] #214: allow a regex pattern like `.*` to match an empty string. * [BUGFIX] #210: `stri_replace_all_fixed(c("1", "NULL"), "NULL", NA)` now results in `c("1", NA)`. * [NEW FEATURE] #199: `stri_sub<-` now allows for ignoring `NA` locations (a new `omit_na` argument added). * [NEW FEATURE] #207: `stri_sub<-` now allows for substring insertions (via `length=0`). * [NEW FUNCTION] #124: `stri_subset<-` functions added. * [NEW FEATURE] #216: `stri_detect`, `stri_subset`, `stri_subset<-` gained a `negate` argument. * [NEW FUNCTION] #175: `stri_join_list` concatenates all strings in a list of character vectors. Useful with, e.g., `stri_extract_all_regex`, `stri_extract_all_words` etc.
jperkin
pushed a commit
that referenced
this pull request
Jan 16, 2017
Version 0.34 ------------ Released on 2016-12-21. Bug fixes: * `#398 <https://github.com/Kozea/WeasyPrint/issues/398>`_: Honor the presentational_hints option for PDFs. * `#399 <https://github.com/Kozea/WeasyPrint/pull/399>`_: Avoid CairoSVG-2.0.0rc* on Python 2. * `#396 <https://github.com/Kozea/WeasyPrint/issues/396>`_: Correctly close files open by mkstemp. * `#403 <https://github.com/Kozea/WeasyPrint/issues/403>`_: Cast the number of columns into int. * Fix multi-page multi-columns and add related tests. Version 0.33 ------------ Released on 2016-11-28. New features: * `#393 <https://github.com/Kozea/WeasyPrint/issues/393>`_: Add tests on MacOS. * `#370 <https://github.com/Kozea/WeasyPrint/issues/370>`_: Enable @font-face on MacOS. Bug fixes: * `#389 <https://github.com/Kozea/WeasyPrint/issues/389>`_: Always update resume_at when splitting lines. * `#394 <https://github.com/Kozea/WeasyPrint/issues/394>`_: Don't build universal wheels. * `#388 <https://github.com/Kozea/WeasyPrint/issues/388>`_: Fix logic when finishing block formatting context. Version 0.32 ------------ Released on 2016-11-17. New features: * `#28 <https://github.com/Kozea/WeasyPrint/issues/28>`_: Support @font-face on Linux. * Support CSS fonts level 3 almost entirely, including OpenType features. * `#253 <https://github.com/Kozea/WeasyPrint/issues/253>`_: Support presentational hints (optional). * Support break-after, break-before and break-inside for pages and columns. * `#384 <https://github.com/Kozea/WeasyPrint/issues/384>`_: Major performance boost. Bux fixes: * `#368 <https://github.com/Kozea/WeasyPrint/issues/368>`_: Respect white-space for shrink-to-fit. * `#382 <https://github.com/Kozea/WeasyPrint/issues/382>`_: Fix the preferred width for column groups. * Handle relative boxes in column-layout boxes. Documentation: * Add more and more documentation about Windows installation. * `#355 <https://github.com/Kozea/WeasyPrint/issues/355>`_: Add fonts requirements for tests. Version 0.31 ------------ Released on 2016-08-28. New features: * `#124 <https://github.com/Kozea/WeasyPrint/issues/124>`_: Add MIME sniffing for images. * `#60 <https://github.com/Kozea/WeasyPrint/issues/60>`_: CSS Multi-column Layout. * `#197 <https://github.com/Kozea/WeasyPrint/pull/197>`_: Add hyphens at line breaks activated by a soft hyphen. Bux fixes: * `#132 <https://github.com/Kozea/WeasyPrint/pull/132>`_: Fix Python 3 compatibility on Windows. Documentation: * `#329 <https://github.com/Kozea/WeasyPrint/issues/329>`_: Add documentation about installation on Windows. Version 0.30 ------------ Released on 2016-07-18. WeasyPrint now depends on html5lib-0.999999999. Bux fixes: * Fix Acid2 * `#325 <https://github.com/Kozea/WeasyPrint/issues/325>`_: Cutting lines is broken in page margin boxes. * `#334 <https://github.com/Kozea/WeasyPrint/issues/334>`_: Newest html5lib 0.999999999 breaks rendering. Version 0.29 ------------ Released on 2016-06-17. Bug fixes: * `#263 <https://github.com/Kozea/WeasyPrint/pull/263>`_: Don't crash with floats with percents in positions. * `#323 <https://github.com/Kozea/WeasyPrint/pull/323>`_: Fix CairoSVG 2.0 pre-release dependency in Python 2.x. Version 0.28 ------------ Released on 2016-05-16. Bug fixes: * `#189 <https://github.com/Kozea/WeasyPrint/issues/189>`_: ``white-space: nowrap`` still wraps on hyphens * `#305 <https://github.com/Kozea/WeasyPrint/issues/305>`_: Fix crashes on some tables * Don't crash when transform matrix isn't invertible * Don't crash when rendering ratio-only SVG images * Fix margins and borders on some tables Version 0.27 ------------ Released on 2016-04-08. New features: * `#295 <https://github.com/Kozea/WeasyPrint/pull/295>`_: Support the 'rem' unit. * `#299 <https://github.com/Kozea/WeasyPrint/pull/299>`_: Enhance the support of SVG images. Bug fixes: * `#307 <https://github.com/Kozea/WeasyPrint/issues/307>`_: Fix the layout of cells larger than their tables. Documentation: * The website is now on GitHub Pages, the documentation is on Read the Docs. * `#297 <https://github.com/Kozea/WeasyPrint/issues/297>`_: Rewrite the CSS chapter of the documentation.
jperkin
pushed a commit
that referenced
this pull request
Mar 20, 2017
6.24 2017-03-14
- Document clone methods inability to clone cookie jars (RT #13542)
- It is now possible to set the proxy and no_proxy attributes from the
constructor of LWP::UserAgent. (GH #124)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
fix build on SmartOS