Unboxing Checklist

community Unboxing checklist

#physical

• check wiring, nothing should be loose
• purge cups should not interfere with carriage motion
• Check eccentric nuts on Y rails (grab the bed like a steering wheel there should be no play)
• Check eccentric nuts on Z rails (The x axis should have no rotational play, this will mess with leveling)
• Note there are no nuts on the X axis because of the linear rail.

Leveling

• don't mess with E2 leveling until E1 is perfect.
• Remember leveling on this printer is center first, leveled with z stop ** then level corners with bed dials.

Firmware

• install latest firmware, the Twinkie community firmware is very popular

First Print

• gcode should not be in sub folder on sdcard
• if you're inexperienced, work on single color prints with one extruder before adding idex

Calibrate Idex

• https://m.youtube.com/watch?v=_a4ZXaFpVpE&feature=youtu.be

First Modifications

• Remove Center post from bed
• Print new purge cups. https://www.thingiverse.com/thing:4840264

community

Join us on discord!

https://discord.gg/XD7XqkCwEE