fix: Add globalPreload to ts-node/esm for node 20 #2009

isaacs · 2023-05-06T04:43:13Z

As of node v20, loader hooks are executed in a separate isolated thread environment. As a result, they are unable to register the require.extensions hooks in a way that would (in other node versions) make both CJS and ESM work as expected.

By adding a globalPreload method, which does execute in the main script environment (but with very limited capabilities), these hooks can be attached properly, and --loader=ts-node/esm will once again make both cjs and esm typescript programs work properly.

isaacs · 2023-05-06T04:46:02Z

Not sure what kind of test should be added for this, since it just returns a string. Just comparing against a fixture feels kind of redundant?

isaacs · 2023-05-06T05:33:58Z

Hm, this definitely needs a bit more work, because it breaks on node versions that don't have the off-thread loader hooks. (Ie, everything before v20.)

I'm not sure the best idiomatic approach to that in this project, but I'm not sure how to detect the situation where it's required, other than sniffing the version.

ljharb · 2023-05-06T05:49:13Z

If it helps, in node 19 vs node 20, this file:

export function globalPreload() {
	console.log('globalPreload');
	return '';
}

export function getGlobalPreloadCode() {
	console.log('getGlobalPreloadCode');
	return '';
}

logs, in node 19:

(node:43737) ExperimentalWarning: Custom ESM Loaders is an experimental feature and might change at any time
(Use `node --trace-warnings ...` to show where the warning was created)
globalPreload
(node:43737) Warning: Loader hook "getGlobalPreloadCode" has been renamed to "globalPreload"
(node:43737) Warning: Loader hook "getGlobalPreloadCode" has been renamed to "globalPreload"

and in node 20:

(node:43215) ExperimentalWarning: Custom ESM Loaders is an experimental feature and might change at any time
(Use `node --trace-warnings ...` to show where the warning was created)
globalPreload

… so, you could probably intercept console.log at module level, catch the experimental warning (and suppress it), and use it to indicate whether you were in 20+ or not?

isaacs · 2023-05-06T05:55:50Z

@ljharb ooh sneaky, that might work. I'll look into that.

ssalbdivad · 2023-05-06T16:26:00Z

Would this allow ts-node to be used directly again in Node 20, or would it still require it to be run through node --loader?

Eagerly awaiting the fix on this so we can support development on Node 20 🙏

cspotcode · 2023-05-06T16:39:17Z

Historically I use version sniffing for this stuff, so I'd go with that. It's happened several times before that ts-node needs to implement multiple behaviors depending on the version of node or ts.

Something to keep in mind: ts-node --esm launches a subprocess sorta like node --require <foo> --loader <bar> <args>. So this change will need to be compatible with both ts-node --esm and node --loader ts-node/esm.

In typechecking mode, is the typechecking work being repeated on both threads? Keeping in mind that typechecking one file involves parsing the others, so CJS files typecheck with type info from ESM files and vice-versa. Repeated typechecking work is not a dealbreaker, but it's something we should at least document in this thread.

codecov · 2023-05-06T16:47:13Z

Codecov Report

Merging #2009 (3fd7b4f) into main (47d4f45) will increase coverage by 0.25%.
The diff coverage is 62.50%.

❗ Current head 3fd7b4f differs from pull request most recent head b614b1b. Consider uploading reports for the commit b614b1b to get more accurate results

Files Changed	Coverage Δ
src/transpilers/swc.ts	`81.81% <ø> (ø)`
src/child/child-loader.ts	`54.54% <38.46%> (-23.24%)`	⬇️
src/esm.ts	`78.90% <62.06%> (-3.67%)`	⬇️
src/bin.ts	`89.83% <66.66%> (-0.52%)`	⬇️
src/index.ts	`80.58% <87.50%> (+0.48%)`	⬆️
src/child/spawn-child.ts	`84.21% <100.00%> (-3.29%)`	⬇️

... and 3 files with indirect coverage changes

📢 Have feedback on the report? Share it here.

isaacs · 2023-05-07T04:29:00Z

Added a commit to ~~only~~ not add the globalPreload registration on node versions less than 20.0.0.

@cspotcode As far as I can tell, with this change, ts-node --esm file.ts is just as broken on node 20 (but not any more broken, at least). I'll look into that, might be a straightforward way to work around it.

I haven't looked into type checking, but my guess is, if registerAndCreateEsmHooks triggers the type checking, then yes, it'd happen twice. Though, if it aborts on failure, it'd only be done once in the failure case, because the loader runs to completion before the globalPreload is executed. It is definitely registering extensions twice, but in isolated environments.

isaacs · 2023-05-23T05:50:07Z

Got some time to dig into this. The issue with ts-node --esm blah.mts seems to have something to do with lateBindHooks. In node before v20, this works fine, but in v20, it doesn't pick them up. Still tracing through to try to figure out why that is.

isaacs · 2023-05-23T06:00:16Z

Aha, of course.

The callInChild is running node --loader=child-loader.js child-entrypoint.js <args>.

child-loader.js sets up the proxy hooks, and child-entrypoint.js assigns the values to them by calling bootstrap() from ../bin, which calls lateBindHooks. But child-entrypoint.js and child-loader.js are in separate isolated threads.

The only way this can work on node 20 is for child-loader.js to set the actual hooks itself, rather than late binding them in the main thread. The child-entrypoint.js should register the require.extensions handlers, however, that avoids the need for a globalPreload.

isaacs · 2023-05-23T06:52:20Z

Ok, got ts-node --esm foo.mts working, albeit in a somewhat unfortunate copypasta way. I suggest refactoring to remove the late-binding loaders entirely on all Node versions, and just set them up in the child-loader.mjs only. It seems like child-entrypoint.ts would then only be needed to munge the process.argv which could be done in a globalPreload on node v20 and higher (until that's replaced with main-thread assignment of loaders via --import), or directly in the loader on earlier versions. I held off on doing that for now, on the assumption that there might be other side-effects I'm not aware of.

Verified that typechecking does not get run twice in the presence of an off-thread loader, which in hindsight makes sense, since either the source is being loaded and transpiled once in the loader thread, or once in the main (only) thread, but never both. The whole point is that the load() function is never called in the main thread on node v20, which is what will eventually enable synchronous-looking behavior of loaders, in accordance with the browser specs.

@cspotcode PTAL when you get a chance :)

cspotcode · 2023-05-23T15:39:48Z

Thanks, I haven't had a chance to take a look yet, but WRT the double-typechecking:
I imagine it would happen when mixing CJS and ESM. E.g. you have some .mts files and some .cts files. And since typechecking one file relies on type info from others, the compiler repeats a bunch of work on both threads.

isaacs · 2023-05-25T17:41:12Z

I've been trying to throw some complicated scenarios at it, but I'm not sure how to go about triggering the situation you're thinking of here.

The userland program isn't ever loaded or typechecked by TS in the loader thread. So if there's double-typechecking happening, it seems to me that it'd be either (a) the loading of ts files from within ts-node itself (or its deps), or (b) already a problem without a loader-thread (ie, if double-checking is happening in a single-threaded loader environment).

Maybe there's something I'm missing? But it seems like this can't possibly make the problem significantly worse. If you have a test or example I can poke at, I'm happy to try to dig in further.

isaacs · 2023-05-25T17:42:54Z

Er, rather, it's not executed on the loader thread. Obviously the code is loaded in the loader thread.

But the typechecking happens when it compiles it to JS, and that only happens in one place. What actually ends up in the main thread is JavaScript going straight to the node VM.

cspotcode · 2023-05-25T21:26:38Z

If double-typecheck is happening, the only visible side-effect would be higher CPU usage. So it's not a problem, per-se, it just means potentially a performance regression on node 20.

If code on the main thread does require('./other-file') then that TS->JS transformation and typecheck happens on the main thread, right?

The scenario I imagine is:

ts-node --esm ./entrypoint.mts

Where ./entrypoint.mts has require('./other.cts')

The loader thread's load() hooks ask the TS compiler for TS diagnostics on entrypoint.mts.
This means an instance of the TS compiler inside the loader thread does the work of parsing and computing type information for entrypoint.mts, other.cts, and every other file they (transitively) reference.

Then the main thread does require('./other.cts'), which asks the TS compiler for TS diagnostics on other.cts
This means another instance of the TS compiler on the main thread does the work of parsing and computing type information for other.cts and every other file it (transitively) references.

cspotcode · 2023-05-25T21:29:24Z

The scenario above could also happen if entrypoint.mts does import './other.cts' which does import './another.cts' (secretly compiles to require('./another.cts') So could happen in a mixed CTS / MTS codebase where source code is exclusively import but some get compiled to require()

cspotcode

Looks good, thanks. I wanted to give a single, complete review after testing this locally, but I've been busy. These are the notes I have so far.

We should move as much of the logic into child-loader.ts and esm.ts, out of the .mjs files which are meant to be shims as thin as possible.
globalPreload should be part of the hooks returned by our createEsmHooks API

cspotcode · 2023-05-23T15:54:47Z

esm.mjs

+
+// Affordance for node 20, where load() happens in an isolated thread
+const offThreadLoader = versionGteLt(process.versions.node, '20.0.0');
+export const globalPreload = () => {


Should this hook be included in the return value of https://typestrong.org/ts-node/api/index.html#createEsmHooks?

That API is meant for anyone wanting to wrap our loader in their own logic. They'd do --loader my-loader.mjs with their my-loader.mjs exporting all the functions they get from calling createEsmHooks(), perhaps wrapping them to implement new behavior.

This API predates support for multiple loaders, but also it should be possible to compose loaders in code so that end-users don't have to pass --loader twice.

Everything is just as composable as it was, with the exception that globalPreload is a bit weird to stack. (You have to append all the strings together wrapped in IIFE's so they don't clobber each others' vars.)

But multiple loaders have been supported longer than globalPreload was needed, so that might not matter.

cspotcode · 2023-05-23T15:58:16Z

child-loader.mjs

 const require = createRequire(fileURLToPath(import.meta.url));

 // TODO why use require() here?  I think we can just `import`
 /** @type {import('./dist/child-loader')} */
 const childLoader = require('./dist/child/child-loader');
 export const { resolve, load, getFormat, transformSource } = childLoader;
+
+// On node v20, we cannot lateBind the hooks from outside the loader thread
+// so it has to be done here.


Technically, can we lateBind by sending config through the MessagePort?

Yeah, that's effectively what's happening here. It's calling bootstrap to late-bind the hooks with the state passed in on the loader URL.

I suppose it could get that information via the message port, but if we have the config we need on the URL, I'm not sure what that gets us?

child-loader.mjs

esm.mjs

src/child/spawn-child.ts

cspotcode · 2023-05-29T16:27:33Z

src/child/spawn-child.ts

  const child = spawn(
    process.execPath,
    [
      '--require',
      require.resolve('./child-require.js'),
      '--loader',
      // Node on Windows doesn't like `c:\` absolute paths here; must be `file:///c:/`
-      pathToFileURL(require.resolve('../../child-loader.mjs')).toString(),
+      loaderURL.toString(),
      require.resolve('./child-entrypoint.js'),
      `${argPrefix}${compress(state)}`,


Note to self: can we include state only once to reduce the risk we hit CommandLine length limit on Windows?
Consider how this will look with forthcoming register() API. If register() will allow sending the state payload in-memory, akin to current lateBind logic, then consider using a pattern that looks similar today.

Yeah good call, I guess child-entrypoint should just pull it from the loader URL if it needs it.

Ah, so the tricky bit here is that the child-entrypoint is modifying and re-stashing the value in the state's argv for child processes, so storing it only in the loader url execArgv involves a bit more refactoring. Can definitely be done, but I'd recommend putting it off for a second commit (if not second PR) just to ensure edge cases are handled properly.

isaacs · 2023-05-29T18:57:30Z

Thinking through the double-checking scenario, I think you're right, but I don't think there's much to be done about it. The good news is, once source-returning commonjs loaders land in node, and ts-node starts using that instead, then the problem goes away (along with several others!), since require() will also be going through the same paths on the loader thread.

Cleaned up where the globalPreload logic lives, and a few other things.

cspotcode · 2023-05-30T02:24:28Z

The ideal until node supports CJS-via-loaders is that we use the message port to delegate all compilation into the loader thread. service.compile() in the main thread and all worker threads can be a shim that makes a blocking RPC call into the loader thread.

But that requires more work and it's not necessary to get this merged.

isaacs · 2023-05-30T03:32:14Z

The ideal until node supports CJS-via-loaders is that we use the message port to delegate all compilation into the loader thread. service.compile() in the main thread and all worker threads can be a shim that makes a blocking RPC call into the loader thread.

I was actually going to suggest something similar, having been in this code a little bit now. Using the globalPreload context.port is a bit tricky, since it means putting more logic in the sloppy mode string-literal code, and you have to feature- or version-detect to know whether the port is even going to be there. The approach I'm using with @tapjs/processinfo is to use diagnostics_channel, which has been available for quite a bit longer: https://github.com/tapjs/processinfo/blob/main/lib/esm.mts

Then at least on node versions from 14.17 up, you could use the same approach for all loaders, whether they're running in a separate thread or not. It does add a tiny bit of unnecessary serialization overhead if loaders are already on the main thread and can just call the function directly, but not much. If the intermediate child process spawned by ts-node --esm had an IPC channel, you could probably have it work in the same way.

cspotcode · 2023-05-31T15:52:46Z

Does diagnostics_channel support blocking calls across thread boundaries? So that require('./something.ts') can be compiled off-thread?

since it means putting more logic in the sloppy mode string-literal code

I'm not too worried about that. We should use the same approach as with the .js/.mjs shims, where all logic lives in separate .ts files. require('/abs/path/to/something-else.js').doTheWork(typeof port == 'undefined' ? port : undefined)

you have to feature- or version-detect to know whether the port is even going to be there

When will the port be absent? My understanding is that it's always present w/off-thread loaders. Are there any non-EOLed node versions that don't have it?

you could use the same approach for all loaders, whether they're running in a separate thread or not

This seems not a big deal. Main and worker threads are making a blocking call to .compile(), whether that call is handled on-thread or RPCd over thread boundaries can be transparently swapped out.

isaacs · 2023-05-31T18:37:41Z

When will the port be absent? My understanding is that it's always present w/off-thread loaders. Are there any non-EOLed node versions that don't have it?

It is always present with off-thread loaders.

But it seems I was completely mistaken about this, and while diagnostics_channel is synchronous, it doesn't (as yet) cross over to the loader thread, so you do still need to proxy through the globalPreload context.port, at least until we get import { register } from 'node:module', and that is not currently synchronous. So, at least for the near term, require.extensions and the possibility of double-typechecking is unavoidable.

isaacs · 2023-05-31T18:43:28Z

When will the port be absent?

Technically speaking, it's not present on 16.0 through 16.11, which doesn't EOL until September 2023, but in those cases we don't bother to use a globalPreload, so it's not an issue.

GeoffreyBooth · 2023-05-31T21:23:07Z

import { register } from 'node:module', and that is not currently synchronous.

It is synchronous: nodejs/node#46826

jlenon7 · 2023-05-31T22:09:35Z

import { register } from 'node:module', and that is not currently synchronous.

It is synchronous: nodejs/node#46826

He is right, register fn is not totally synchronous. Behind the scenes it's still async because of the communication with loaders worker thread.

cspotcode · 2023-05-31T23:12:03Z

For the sake of anyone else reading along:

A combination of MessageChannel & SharedArrayBuffer & Atomics can be used to make blocking RPC calls between threads.

The goal is to make blocking calls from the main thread to the loader thread, using MessageChannel / SharedArrayBuffer / Atomics. We want to block the main thread / worker thread, but the loader thread can answer asynchronously.

So it is possible today for require() hooks to call another thread for module resolution and compilation.

Sounds like the question is whether bootstrapping must be async. Do we have to await register() before Module.runMain();? Does register() give us a promise which is guaranteed to resolve after a port exists in the main thread which can talk to the loader thread? As soon as the promise resolves, we'll synchronously attempt to use the port.

GeoffreyBooth · 2023-06-01T00:01:46Z

Do we have to await register() before Module.runMain();? Does register() give us a promise

At least according to the docs in the PR, register is sync. It does not return a promise.

Re: TypeStrong#2009 (comment)

isaacs · 2023-09-06T00:36:24Z

Updated to remove line number source map tests for repl and eval. (If you'd rather take on the refactoring to try to get it to work, that's fine, but imo that should be a separate PR at least.)

Added import.mjs and import-loader.mjs to support --import ts-node/import, which is similar to --loader ts-node/esm, but:

no warnings
no need for a globalPreload script string
sees process.stderr.isTTY properly, so no need for a port message to get pretty error reporting

Would be good to add some tests for --import, I can also back that out and make it a separate PR. Otherwise, I think this is ready to land.

Re: TypeStrong#2009 (comment)

This removes support for keeping import assertions, which were broken in swc at some point, and unconditionally transpiled into import attributes. (Ie, `import/with` instead of `import/assert`.) No version of node supports import attributes with this syntax yet, so anyone using swc to import json in ESM is out of luck no matter what. And swc 1.3.83 broke the option that ts-node was using. The position of the swc project is that experimental features are not supported, and may change in patch versions without warning, making them unsafe to rely on (as evidenced here, and the reason why this behavior changed unexpectedly in the first place). Better to just not use experimental swc features, and let it remove import assertions rather than transpile them into something that node can't run. Fix: TypeStrong#2056

As of node v20, loader hooks are executed in a separate isolated thread environment. As a result, they are unable to register the `require.extensions` hooks in a way that would (in other node versions) make both CJS and ESM work as expected. By adding a `globalPreload` method, which *does* execute in the main script environment (but with very limited capabilities), these hooks can be attached properly, and `--loader=ts-node/esm` will once again make both cjs and esm typescript programs work properly.

When running `ts-node --esm`, a child process is spawned with the `child-loader.mjs` loader, `dist/child/child-entrypoint.js` main, and `argv[2]` set to the base64 encoded compressed configuration payload. `child-loader.mjs` imports and re-exports the functions defined in `src/child/child-loader.ts`. These are initially set to empty loader hooks which call the next hook in line until they are defined by calling `lateBindHooks()`. `child-entrypoint.ts` reads the config payload from argv, and bootstraps the registration process, which then calls `lateBindHooks()`. Presumably, the reason for this hand-off is because `--loader` hooks do not have access to `process.argv`. Unfortunately, in node 20, they don't have access to anything else, either, so calling `lateBindHooks` is effectively a no-op; the `child-loader.ts` where the hooks end up getting bound is not the same one that is being used as the actual loader. To solve this, the following changes are added: 1. An `isLoaderThread` flag is added to the BootstrapState. If this flag is set, then no further processing is performed beyond binding the loader hooks. 2. `callInChild` adds the config payload to _both_ the argv and the loader URL as a query param. 3. In the `child-loader.mjs` loader, only on node v20 and higher, the config payload is read from `import.meta.url`, and `bootstrap` is called, setting the `isLoaderThread` flag. I'm not super enthusiastic about this implementation. It definitely feels like there's a refactoring opportunity to clean it up, as it adds some copypasta between child-entrypoint.ts and child-loader.mjs. A further improvement would be to remove the late-binding handoff complexity entirely, and _always_ pass the config payload on the loader URL rather than on process.argv.

When an error is thrown in the loader thread, it must be passed through the comms channel to be printed in the main thread. Node has some heuristics to try to reconstitute errors properly, but they don't function very well if the error has a custom inspect method, or properties that are not compatible with JSON.stringify, so the TSErrors raised by the source transforms don't get printed in any sort of useful way. This catches those errors, and creates a new error that can go through the comms channel intact. Another possible approach would be to update the shape of the errors raised by source transforms, but that would be a much more extensive change with further reaching consequences.

Set the default `options.pretty` value based on stderr rather than stdout, as this is where errors are printed. The loader thread does not get a process.stderr.isTTY set, because its "stderr" is actually a pipe. If `options.pretty` is not set explicitly, the GlobalPreload's `context.port` is used to send a message from the main thread indicating the state of stderr.isTTY. Adds `Service.setPrettyErrors` method to enable setting this value when needed.

The @cspotcode/source-map-support module does not function properly on Node 20, resulting in incorrect stack traces. Fortunately, the built-in source map support in Node is now quite reliable. This does have the following (somewhat subtle) changes to error output: - When a call site is in a method defined within a constructor function, it picks up the function name *as well as* the type name and method name. So, in tests where a method is called and throws within the a function constructor, we see `Foo.Foo.bar` instead of `Foo.bar`. - Call sites displays show filenames instead of file URLs. - The call site display puts the `^` character under the `throw` rather than the construction point of the error object. This is closer to how normal un-transpiled JavaScript behaves, and thus somewhat preferrable, but isn't possible when all we have to go on is the Error stack property, so it is a change. I haven't been able to figure out why exactly, but the call sites appear to be somewhat different in the repl/eval contexts as a result of this change. It almost seems like the @cspotcode/source-map-support was applying source maps to the vm-evaluated scripts, but I don't see how that could be, and in fact, there's a comment in the code stating that that *isn't* the case. But the line number showing up in an Error.stack property is `1` prior to this change (matching the location in the TS source) and is `2` afterwards (matching the location in the compiled JS). An argument could be made that specific line numbers are a bit meaningless in a REPL anyway, and the best approach is to just make those tests accept either result. One possible approach to provide built-in source map support for the repl would be to refactor the `appendCompileAndEvalInput` to diff and append the *input* TS, and compile within the `runInContext` method. If the transpiled code was prepended with `process.setSourceMapsEnabled(true);`, then Error stacks and call sites would be properly source mapped by Node internally.

Re: TypeStrong#2009 (comment)

This also adds a type for the loader hooks API v3, as globalPreload is scheduled for removal in node v21, at which point '--loader ts-node/esm' will no longer work, and '--import ts-node/import' will be the way forward.

…g it in here to quiet the CI on other PRs

#2063) * bump min ts version to 4.4 to match definitelytyped at time of writing * update lockfile * fix a bit of noise in test failures, also addressed by #2009, sneaking it in here to quiet the CI on other PRs * Sneak in improvement to assertion logging

piotr-cz · 2024-08-28T09:22:04Z

This fix (or at least @isaacs/ts-node-temp-fork-for-pr-2009) seems to fix all ts-node issues related to node 18.19.x, 20.x and 22.x

isaacs force-pushed the isaacs/node-20-fix branch from 2e90551 to 92c3ce3 Compare May 6, 2023 04:48

isaacs mentioned this pull request May 6, 2023

Node 20 ESM loaders cannot hook into the CommonJS loader nodejs/node#47880

Closed

isaacs force-pushed the isaacs/node-20-fix branch from 99a5b73 to 6b9daf0 Compare May 16, 2023 00:00

cspotcode reviewed May 29, 2023

View reviewed changes

isaacs added a commit to isaacs/ts-node that referenced this pull request Sep 6, 2023

test: line numbers in eval are not reliably source mapped

fa45fb9

Re: TypeStrong#2009 (comment)

isaacs added a commit to isaacs/ts-node that referenced this pull request Sep 6, 2023

test: line numbers in eval are not reliably source mapped

d693a91

Re: TypeStrong#2009 (comment)

isaacs force-pushed the isaacs/node-20-fix branch from bb2e9f1 to be3b34f Compare September 6, 2023 00:38

GeoffreyBooth mentioned this pull request Sep 7, 2023

esm: remove globalPreload hook (superseded by initialize) nodejs/node#49144

Merged

isaacs and others added 13 commits September 7, 2023 14:54

loader: return empty globalPreload when not using off-thread loader

71e319c

WIP fix tests for off-thread loader

a7aa440

Pushing my local changes

9346c54

test: fix node defaultLoad error message check

db1fdf9

test: line numbers in eval are not reliably source mapped

5c83838

Re: TypeStrong#2009 (comment)

add support for '--import ts-node/import'

49c74a0

This also adds a type for the loader hooks API v3, as globalPreload is scheduled for removal in node v21, at which point '--loader ts-node/esm' will no longer work, and '--import ts-node/import' will be the way forward.

test: allow windows line endings, node-version-specific path displays

ed07dd9

isaacs force-pushed the isaacs/node-20-fix branch from 8f1f73f to 3fd7b4f Compare September 7, 2023 21:56

test: allow win32 line endings, path displays

b614b1b

isaacs force-pushed the isaacs/node-20-fix branch from 3fd7b4f to b614b1b Compare September 7, 2023 22:22

isaacs mentioned this pull request Sep 8, 2023

remove swc experimental options #2057

Closed

rotu mentioned this pull request Sep 8, 2023

[BUG] Tests crash out on ctrl-c npm/cli#6766

Open

2 tasks

isaacs requested a review from cspotcode September 10, 2023 01:28

isaacs mentioned this pull request Sep 10, 2023

v18 roadmap tapjs/tapjs#821

Closed

26 tasks

cspotcode added a commit that referenced this pull request Sep 15, 2023

fix a bit of noise in test failures, also addressed by #2009, sneakin…

09e3213

…g it in here to quiet the CI on other PRs

cspotcode added a commit that referenced this pull request Sep 15, 2023

fix a bit of noise in test failures, also addressed by #2009, sneakin…

6614e1b

…g it in here to quiet the CI on other PRs

nlf mentioned this pull request Nov 20, 2023

feat: update tap code4rena-dev/skeleton#9

Open

fix: Add globalPreload to ts-node/esm for node 20 #2009

Are you sure you want to change the base?

fix: Add globalPreload to ts-node/esm for node 20 #2009

Conversation

isaacs commented May 6, 2023

isaacs commented May 6, 2023

isaacs commented May 6, 2023

ljharb commented May 6, 2023

isaacs commented May 6, 2023

ssalbdivad commented May 6, 2023

cspotcode commented May 6, 2023

codecov bot commented May 6, 2023 • edited Loading

Codecov Report

isaacs commented May 7, 2023 • edited Loading

isaacs commented May 23, 2023

isaacs commented May 23, 2023

isaacs commented May 23, 2023

cspotcode commented May 23, 2023

isaacs commented May 25, 2023

isaacs commented May 25, 2023

cspotcode commented May 25, 2023 • edited Loading

cspotcode commented May 25, 2023 • edited Loading

cspotcode left a comment

Choose a reason for hiding this comment

cspotcode May 23, 2023

Choose a reason for hiding this comment

isaacs May 29, 2023 • edited Loading

Choose a reason for hiding this comment

cspotcode May 23, 2023

Choose a reason for hiding this comment

isaacs May 29, 2023

Choose a reason for hiding this comment

cspotcode May 29, 2023

Choose a reason for hiding this comment

isaacs May 29, 2023

Choose a reason for hiding this comment

isaacs May 29, 2023

Choose a reason for hiding this comment

isaacs commented May 29, 2023

cspotcode commented May 30, 2023

isaacs commented May 30, 2023

cspotcode commented May 31, 2023

isaacs commented May 31, 2023 • edited Loading

isaacs commented May 31, 2023

GeoffreyBooth commented May 31, 2023

jlenon7 commented May 31, 2023

cspotcode commented May 31, 2023

GeoffreyBooth commented Jun 1, 2023

isaacs commented Sep 6, 2023

piotr-cz commented Aug 28, 2024

codecov bot commented May 6, 2023 •

edited

Loading

isaacs commented May 7, 2023 •

edited

Loading

cspotcode commented May 25, 2023 •

edited

Loading

cspotcode commented May 25, 2023 •

edited

Loading

isaacs May 29, 2023 •

edited

Loading

isaacs commented May 31, 2023 •

edited

Loading