Printer linter bug fixes def profile Sketch.

PP-333

resources/definitions/ultimaker_sketch.def.json

@@ -79,8 +79,7 @@
  "adhesion_type": { "value": "'raft'" },
  "brim_width": { "value": "3" },
  "cool_fan_speed": { "value": "100" },
- "cool_min_time": { "value": 3 },
- "default_material_print_temperature": { "value": "215" },
+ "cool_min_layer_time": { "value": 3 },
  "extruder_prime_pos_abs": { "default_value": true },
  "gantry_height": { "value": "60" },
  "infill_overlap": { "value": 15 },
@@ -105,8 +104,6 @@
  "machine_nozzle_heat_up_speed": { "default_value": 1.4 },
  "machine_start_gcode": { "default_value": "M140 S50 T0; Set Platform Temp\nM104 S220 T0; Set Extruder Temp\nG90; Use Absolute Positioning\nG28; Home\nM132 X Y Z A B; Set Current Position to Home\nG161 X Y F3300; Move to min axes positions\nM7 T0; Wait For Platform to Heat\nM6 T0; Wait For Extruders to Heat\nM651; Turn on back fan\nM907 X100 Y100 Z40 A80 B20; Set Stepper Currents\nM106; Enable Cooling Fan\n; Purge Line\nG92 E0; Reset Extruder Axis Position\nG1 X-26.18 Y-75.90 Z0.200 F420\nG1 X26.18 Y-75.90 E10\nG92 E0; Reset Extruder Axis Position\n; Start GCode\n" },
  "machine_width": { "default_value": 150 },
- "material_bed_temperature": { "maximum_value": "115" },
- "material_bed_temperature_layer_0": { "maximum_value": "115" },
  "material_diameter": { "default_value": 1.75 },
  "material_flow": { "default_value": 109 },
  "multiple_mesh_overlap": { "value": "0" },