Remove constraint that material is too hot for most printers

Most printers can handle it, really. And if it gets too hot, Cura gives a warning anyway. If it's not supported, Cura also gives a warning.
Ultimaker · Jul 19, 2017 · 9d89b3d · 9d89b3d
1 parent 185ccf5
commit 9d89b3d
Show file tree

Hide file tree

Showing 9 changed files with 9 additions and 26 deletions.
diff --git a/generic_cpe_plus.xml.fdm_material b/generic_cpe_plus.xml.fdm_material
@@ -10,7 +10,7 @@ Generic CPE+ profile. The data in this file may not be correct for your specific
  <color>Generic</color>
  </name>
  <GUID>e2409626-b5a0-4025-b73e-b58070219259</GUID>
- <version>2</version>
+ <version>3</version>
  <color_code>#3633F2</color_code>
  <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
  <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
@@ -20,7 +20,6 @@ Generic CPE+ profile. The data in this file may not be correct for your specific
  <diameter>2.85</diameter>
  </properties>
  <settings>
- <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
  <setting key="print temperature">260</setting>
  <setting key="heated bed temperature">107</setting>
  <setting key="standby temperature">175</setting>
@@ -41,7 +40,6 @@ Generic CPE+ profile. The data in this file may not be correct for your specific
  <machine>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
- <setting key="hardware compatible">unknown</setting>
 
  <hotend id="BB 0.4" />
  <hotend id="AA 0.4">

diff --git a/generic_pc.xml.fdm_material b/generic_pc.xml.fdm_material
@@ -10,7 +10,7 @@ Generic PC profile. The data in this file may not be correct for your specific m
  <color>Generic</color>
  </name>
  <GUID>98c05714-bf4e-4455-ba27-57d74fe331e4</GUID>
- <version>2</version>
+ <version>3</version>
  <color_code>#F29030</color_code>
  <description>Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness.</description>
  <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding.</adhesion_info>
@@ -20,7 +20,6 @@ Generic PC profile. The data in this file may not be correct for your specific m
  <diameter>2.85</diameter>
  </properties>
  <settings>
- <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
  <setting key="print temperature">270</setting>
  <setting key="heated bed temperature">107</setting>
  <setting key="standby temperature">175</setting>
@@ -39,7 +38,6 @@ Generic PC profile. The data in this file may not be correct for your specific m
  <machine>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
- <setting key="hardware compatible">unknown</setting>
 
  <hotend id="BB 0.4" />
  <hotend id="AA 0.4">

diff --git a/generic_pc_175.xml.fdm_material b/generic_pc_175.xml.fdm_material
@@ -10,7 +10,7 @@ Generic PC profile. The data in this file may not be correct for your specific m
  <color>Generic</color>
  </name>
  <GUID>62414577-94d1-490d-b1e4-7ef3ec40db02</GUID>
- <version>1</version>
+ <version>2</version>
  <color_code>#F29030</color_code>
  <description>Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness.</description>
  <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding.</adhesion_info>
@@ -20,7 +20,6 @@ Generic PC profile. The data in this file may not be correct for your specific m
  <diameter>1.75</diameter>
  </properties>
  <settings>
- <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
  <setting key="print temperature">270</setting>
  <setting key="heated bed temperature">107</setting>
  <setting key="standby temperature">175</setting>

diff --git a/ultimaker_cpe_plus_black.xml.fdm_material b/ultimaker_cpe_plus_black.xml.fdm_material
@@ -7,7 +7,7 @@
  <color>Black</color>
  </name>
  <GUID>1aca047a-42df-497c-abfb-0e9cb85ead52</GUID>
- <version>2</version>
+ <version>3</version>
  <color_code>#0e0e10</color_code>
  <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
  <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
@@ -17,7 +17,6 @@
  <diameter>2.85</diameter>
  </properties>
  <settings>
- <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
  <setting key="print temperature">260</setting>
  <setting key="heated bed temperature">107</setting>
  <setting key="standby temperature">175</setting>
@@ -37,7 +36,6 @@
  <machine>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
- <setting key="hardware compatible">unknown</setting>
 
  <hotend id="BB 0.4" />
  <hotend id="BB 0.8" />

diff --git a/ultimaker_cpe_plus_transparent.xml.fdm_material b/ultimaker_cpe_plus_transparent.xml.fdm_material
@@ -7,7 +7,7 @@
  <color>Transparent</color>
  </name>
  <GUID>a9c340fe-255f-4914-87f5-ec4fcb0c11ef</GUID>
- <version>2</version>
+ <version>3</version>
  <color_code>#d0d0d0</color_code>
  <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
  <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
@@ -17,7 +17,6 @@
  <diameter>2.85</diameter>
  </properties>
  <settings>
- <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
  <setting key="print temperature">260</setting>
  <setting key="heated bed temperature">107</setting>
  <setting key="standby temperature">175</setting>
@@ -37,7 +36,6 @@
  <machine>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
- <setting key="hardware compatible">unknown</setting>
 
  <hotend id="BB 0.4" />
  <hotend id="BB 0.8" />

diff --git a/ultimaker_cpe_plus_white.xml.fdm_material b/ultimaker_cpe_plus_white.xml.fdm_material
@@ -7,7 +7,7 @@
  <color>White</color>
  </name>
  <GUID>6df69b13-2d96-4a69-a297-aedba667e710</GUID>
- <version>2</version>
+ <version>3</version>
  <color_code>#f1ece1</color_code>
  <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
  <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
@@ -17,7 +17,6 @@
  <diameter>2.85</diameter>
  </properties>
  <settings>
- <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
  <setting key="print temperature">260</setting>
  <setting key="heated bed temperature">107</setting>
  <setting key="standby temperature">175</setting>
@@ -37,7 +36,6 @@
  <machine>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
- <setting key="hardware compatible">unknown</setting>
 
  <hotend id="BB 0.4" />
  <hotend id="BB 0.8" />

diff --git a/ultimaker_pc_black.xml.fdm_material b/ultimaker_pc_black.xml.fdm_material
@@ -7,7 +7,7 @@
  <color>Black</color>
  </name>
  <GUID>e92b1f0b-a069-4969-86b4-30127cfb6f7b</GUID>
- <version>2</version>
+ <version>3</version>
  <color_code>#0e0e10</color_code>
  <description>Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness.</description>
  <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding.</adhesion_info>
@@ -17,7 +17,6 @@
  <diameter>2.85</diameter>
  </properties>
  <settings>
- <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
  <setting key="print temperature">270</setting>
  <setting key="heated bed temperature">107</setting>
  <setting key="standby temperature">175</setting>
@@ -36,7 +35,6 @@
  <machine>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
- <setting key="hardware compatible">unknown</setting>
 
  <hotend id="BB 0.4" />
  <hotend id="AA 0.4">

diff --git a/ultimaker_pc_transparent.xml.fdm_material b/ultimaker_pc_transparent.xml.fdm_material
@@ -7,7 +7,7 @@
  <color>Transparent</color>
  </name>
  <GUID>8a38a3e9-ecf7-4a7d-a6a9-e7ac35102968</GUID>
- <version>2</version>
+ <version>3</version>
  <color_code>#d0d0d0</color_code>
  <description>Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness.</description>
  <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding.</adhesion_info>
@@ -17,7 +17,6 @@
  <diameter>2.85</diameter>
  </properties>
  <settings>
- <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
  <setting key="print temperature">270</setting>
  <setting key="heated bed temperature">107</setting>
  <setting key="standby temperature">175</setting>
@@ -36,7 +35,6 @@
  <machine>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
- <setting key="hardware compatible">unknown</setting>
 
  <hotend id="BB 0.4" />
  <hotend id="AA 0.4">

diff --git a/ultimaker_pc_white.xml.fdm_material b/ultimaker_pc_white.xml.fdm_material
@@ -7,7 +7,7 @@
  <color>White</color>
  </name>
  <GUID>5e786b05-a620-4a87-92d0-f02becc1ff98</GUID>
- <version>2</version>
+ <version>3</version>
  <color_code>#ecece7</color_code>
  <description>Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness.</description>
  <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding.</adhesion_info>
@@ -17,7 +17,6 @@
  <diameter>2.85</diameter>
  </properties>
  <settings>
- <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
  <setting key="print temperature">270</setting>
  <setting key="heated bed temperature">107</setting>
  <setting key="standby temperature">175</setting>
@@ -36,7 +35,6 @@
  <machine>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
  <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
- <setting key="hardware compatible">unknown</setting>
 
  <hotend id="BB 0.4" />
  <hotend id="AA 0.4">