Fixed typo in xpciepsu.c #188
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
intialize EventVal to zero for safety when launching Signed-off-by: Alex Kiani <alex.kiani@xilinx.com> Acked-by: Wendy Liang <wendy.liang@xilinx.com>
Add support to register notifier for CPU idle before force power down. Register notifier for EVENT_CPU_IDLE_FORCE_PWRDWN to enable CPU idle before force power down. XilPM sends CPU idle callback to the core which registers notifier for CPU idle callbacks. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Acked-for-series: Nicole Baze <nicole.baze@xilinx.com>
Core registers for CPU idle callback using register notifier. Add support to send CPU idle callback to core which registered for CPU idle callback. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Acked-for-series: Nicole Baze <nicole.baze@xilinx.com>
Subsystem registers for CPU idle callback for each core using register notifier. Add support to send CPU idle callback to each core in subsystem which registered for CPU idle callback. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Acked-for-series: Nicole Baze <nicole.baze@xilinx.com>
XilPM sends CPU idle callback before force power down core/subsystem if CPU idle is supported and changes subsystem and core state to pending power down. On receiving CPU idle callback, core executes idling sequence and goes to WFI state. This commit adds support to process pending force power down event on receiving power down event from PSM. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Acked-for-series: Nicole Baze <nicole.baze@xilinx.com>
…t done Create scheduler task to power down core if not powered down from cpu idle. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Acked-for-series: Nicole Baze <nicole.baze@xilinx.com>
Currently PLM provides acknowledgement to all IPI commands irrespective of its acknowledgement type. Because of that during force power down if CPU idle is supported, PLM sends CPU idle callback to target subsystem/core and provides acknowledgement to initiator. But actual power down doesn't happen and initiator of force power down don't have idea of whether subsystem/core is power down or not. So add support for blocking force power down API to provide ack on actual power down of core/subsystem. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Acked-for-series: Nicole Baze <nicole.baze@xilinx.com>
IPI Ack for force power down command is handled by xilpm. So skip providing IPI ack for force power down command. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Acked-for-series: Nicole Baze <nicole.baze@xilinx.com>
Add support to send acknowledgement callback for non blocking APIs. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Acked-for-series: Nicole Baze <nicole.baze@xilinx.com>
PLM should idle all transactions of subsystem before calling subsystem restart. This commit adds support to send notification to subsystem to idle all transaction and to call subsystem restart after idling all cores in subsystem. If subsystem is not responding to the restart callback then subsystem restart will not happen. Need to add support for recovery handling to handle this. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Acked-for-series: Nicole Baze <nicole.baze@xilinx.com>
This patch fixes logical error in XPlmi_MemSetBytes API. Signed-off-by: Vikram Sreenivasa Batchali <b.vikram@xilinx.com> Acked-by: Kalyani Akula <Kalyani.akula@xilinx.com>
- Added validation check for NPI table command comming from PLM Signed-off-by: Hariharan Baskaran <hariharan.baskaran@xilinx.com> Acked-by: Rama devi Veggalam <rama.devi.veggalam@xilinx.com>
Remove license text for aiengine driver. Signed-off-by: Wendy Liang <wendy.liang@xilinx.com> Acked-by: Tejus Siddagangaiah <tejus.siddagangaiah@xilinx.com>
…maCfgAndXfer This patch renames XSecure_AesPmcDmaCfgByteSwap API with more appropriate name XSecure_AesPmcDmaCfgAndXfer Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com> Acked-for-series: Vikram Sreenivasa Batchali <b.vikram@xilinx.com>
This patch updates doxygen function description for client XSecure_Sha3Initialize to match the functionality Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com> Acked-for-series: Vikram Sreenivasa Batchali <b.vikram@xilinx.com>
This patch fixes the below c++ compilation issue in dfxasm example by
typecasting the variable properly.
../src/xdfxasm_example.c:153:29: error: invalid conversion from 'u8'
{aka 'unsigned char'} to 'XDfxasm_State' [-fpermissive]
XDfxasm_SetState(&Dfxasm, ShutdownMode);
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Acked-by: Mubin Usman Sayyed <mubin.usman.sayyed@xilinx.com>
The interrupts are already being disabled in the function low_level_output that calls emacps_sgsend. Signed-off-by: Anirudha Sarangi <anirudha.sarangi@xilinx.com> Acked-for-series: Harini Katakam <harini.katakam@xilinx.com>
This barrier can degrade performance without providing any added advantage. There is already a barrier present after the while loop. Signed-off-by: Anirudha Sarangi <anirudha.sarangi@xilinx.com> Acked-for-series: Harini Katakam <harini.katakam@xilinx.com>
…l the corresponding packet is txed In lwip, udp send is a zero copy operation where the same user buffer is used in the adapter BD to send out the packet. However, the send routine returns immediately after queing the packet. This can create a false impression with the user space applications where they can reuse the same buffer and there by corrupt the previous transmit. The patch adds support for the same. It supports use cases where multiple applications and threads do udp send with one wanting to block till Tx is complete and the other wanting a faster udp send without blocking for buffer to be txed out. All changes are done under a flag and that flag is disabled by default so that there is no impact to any of the existing use cases. Signed-off-by: Anirudha Sarangi <anirudha.sarangi@xilinx.com> Acked-for-series: Harini Katakam <harini.katakam@xilinx.com>
This patch adds support for use case where the user intends to wait till a udp send is complete so that it can reuse the buffer safely. Signed-off-by: Anirudha Sarangi <anirudha.sarangi@xilinx.com> Acked-for-series: Harini Katakam <harini.katakam@xilinx.com>
…lications to 1 Having them as 2 does not result in increased performance. In future the applications should be updated so that the parallel clients are operated through separate threads. Signed-off-by: Anirudha Sarangi <anirudha.sarangi@xilinx.com> Acked-for-series: Harini Katakam <harini.katakam@xilinx.com>
…tions. This patch adds EXPORT CONTROL eFuse check in all crypto init functions to avoid further processing of crypto operations in case if the silicon is programmed with EXPORT CONTROL eFuse. Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com> Acked-by: Mohan Marutirao Dhanawade <mohan.dhanawade@xilinx.com>
Error Node ID and Event ID defines are confusing to use while registering and un-registering an error. This is because errors are events which come under the list of Node Class. This patch renames these defines for better understanding of error node and event IDs. Signed-off-by: Mounika Akula <mounika.akula@xilinx.com> Acked-by: Vikram Sreenivasa Batchali <b.vikram@xilinx.com>
Updated function prototypes to fix warnings reported with -Wstrict-prototypes compiler flag. Signed-off-by: Mubin Usman Sayyed <mubin.usman.sayyed@xilinx.com> Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
… definition Previously, RPU trustzone setting could be set to non-secure after boot. Enable RPU trustzone security setting after boot to be preserved for default subsystem by adding PM_CAP_SECURE to RPU0 in prealloc for default subsystem. Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com> Acked-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@xilinx.com>
Currently TTC is not added as pre-alloc device for default subsystem. Because of that if sleep timer is using TTC device for timer and tries to access TTC registers without requesting TTC device, then application might be hang or crashed. So add TTC devices in pre-alloc device list. Note: We can remove TTC devices from pre-alloc device if different timer can be used by sleep timer instead of TTC timer. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Acked-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@xilinx.com> Acked-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@xilinx.com>
-This patch adds fixes for Doxygen warnings in xilsem client files Signed-off-by: HKRNV Gupta <hkrnv.gupta.vutukuru@xilinx.com> Acked-by: Rama devi Veggalam <rama.devi.veggalam@xilinx.com>
This patch fix the doxygen warnings in sdps driver. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Acked-by: Srinivas Goud <srinivas.goud@xilinx.com>
Replace switch case with ifelse and added redundancy to XLoader_checkIpiAccess Signed-off-by: Praveen Teja Kundanala <praveen.teja.kundanala@xilinx.com> Acked-by: Mohan Marutirao Dhanawade <mohan.dhanawade@xilinx.com>
…functions to happen as soon as PLM starts Move XPlmi_InitDebugLogBuffer and XPlm_InitProc functions before DMA initialization to happen as soon as PLM starts. This will make sure that Debug log structure is initialized so that no prints would get missed and processor initialization happens as early as PLM starts. Signed-off-by: Mounika Akula <mounika.akula@xilinx.com> Acked-by: Vikram Sreenivasa Batchali <b.vikram@xilinx.com>
Signed-off-by: Manikanta Sreeram <msreeram@xilinx.com> Acked-by: Ashok Madugula <ashokku@xilinx.com>
This patch updates changelog for recent changes in cframe and cfupmc Signed-off-by: Gaurav Mahajan <gaurav.mahajan@xilinx.com> Acked-by: Vikram Sreenivasa Batchali <b.vikram@xilinx.com>
Updated standalone.mss with copyright. Signed-off-by: Mubin Usman Sayyed <mubin.usman.sayyed@xilinx.com> Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
This reverts commit 8ce908a. We observed that baremetal domU guest interrupts are not working with this update. Though this change is not affecting functionality directly, the way compiler generating str instruction (with post indexing) while writing to GICD_PRIORITY register in for loop is causing failure. Reverting this commit till we get proper fix. Signed-off-by: Mubin Usman Sayyed <mubin.usman.sayyed@xilinx.com> Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Factor in half bandwidth when using MTS in IMR modes Signed-off-by: Conall O'Griofa <conall.o'griofa@xilinx.com> Acked-by: Anand Ashok Dumbre <anandash@xilinx.com>
License update in .props file for usbpsu. Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com> Acked-by: Srinivas Goud <srinivas.goud@xilinx.com>
Add license information in srec_spi_bootloader.mss file Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Acked-by: Srinivas Goud <srinivas.goud@xilinx.com>
Add the license information for the data.c file. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Acked-by: Srinivas Goud <srinivas.goud@xilinx.com>
Add license information to dependencies.props file Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Acked-by: Srinivas Goud <srinivas.goud@xilinx.com>
Add libmetal_v2_2 change list Signed-off-by: Sergei Korneichuk <sergei.korneichuk@xilinx.com> Acked-by: Arun Kannan <arunbala@xilinx.com>
The interrupt example would fail because of no interrupt. Now OT threshold is set lower to trigger OT alarm. Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com> Acked-by: Conall O'Griofa <conallo@xilinx.com>
A rounding error was being caused by a cast operation Signed-off-by: Conall O'Griofa <conall.o'griofa@xilinx.com> Acked-by: Anand Ashok Dumbre <anandash@xilinx.com>
…420 10bpc format. The color format and stream format for 10 bpc for 420 are corrected. Signed-off-by: nishantd <nishant.dhonde@xilinx.com> Acked-by: Kapil Usgaonkar <kapil.usgaonkar@xilinx.com>
Signed-off-by: Meena Paleti <meena.paleti@xilinx.com>
Signed-off-by: Meena Paleti <meena.paleti@xilinx.com>
Added copyright message to depedencies.props Signed-off-by: Conall O'Griofa <conall.o'griofa@xilinx.com> Acked-by: Anand Ashok Dumbre <anandash@xilinx.com>
Signed-off-by: Meena Paleti <meena.paleti@xilinx.com>
BISR trigger bit does not need to un write after BISR PASS as per GTYP initialization sequence. So remove code to un write BISR trigger bit. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Acked-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Block outbound error broadcast from PL columns in NoC tile. In the NoC tile's event broadcast switch B, these signal must be blocked in all directions. Blocking these signal avoids any possible broadcast network pollution in the tiles beyond the NoC tile. Signed-off-by: Nishad Saraf <nishad.saraf@xilinx.com> Acked-by: Wendy Liang <wendy.liang@xilinx.com>
Signed-off-by: Manikanta Sreeram <msreeram@xilinx.com> Acked-by : Ashok Kumar Madugula <ashok.kumar.madugula@xilinx.com>
…libraries Signed-off-by: Siva Addepalli <sivaprasad.addepalli@xilinx.com>
|
thanks @nbstrong - we donot accept PRs. Can you send a path to git@amd.com. Or can you give your signed by info so that we can include in our next release. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.