Version 1.4.3

- added option to select an alternate HW SPI channel and/or SPI settings - by method selectSPI(SPIClass& spi, SPISettings spi_settings) of driver base class GxEPD2_EPD - by calling selectSPI before calling init() of display class - or by calling extended init() method that has these parameters added - tested with RPi Pico RP2040 using Good Display DESPI-PICO connection shield - updated GxEPD2_Example to show use with DESPI-PICO - DESPI-PICO: see https://www.good-display.com/product/393.html
ZinggJM · Jan 10, 2022 · b42a38f · b42a38f
1 parent 719fbde
commit b42a38f
Show file tree

Hide file tree

Showing 20 changed files with 198 additions and 32 deletions.
diff --git a/README.md b/README.md
@@ -108,7 +108,15 @@
 - promotion panels from suppliers are welcome, to add support to GxEPD2
 - donation panels from users are welcome, to add support to GxEPD2
 
-### Version 1.4.2
+### Version 1.4.3
+- added option to select an alternate HW SPI channel and/or SPI settings
+- by method selectSPI(SPIClass& spi, SPISettings spi_settings) of driver base class GxEPD2_EPD
+- by calling selectSPI before calling init() of display class
+- or by calling extended init() method that has these parameters added
+- tested with RPi Pico RP2040 using Good Display DESPI-PICO connection shield
+- updated GxEPD2_Example to show use with DESPI-PICO
+- DESPI-PICO: see https://www.good-display.com/product/393.html
+#### Version 1.4.2
 - added support for Waveshare 3.7" b/w board and panel ED037TC1
 - waveform tables for ED037TC1 are taken unmodified from Waveshare demo code
 - refresh behavior with ED037TC1 with GxEPD2 is not perfect, could not be resolved

diff --git a/examples/GxEPD2_Example/GxEPD2_Example.ino b/examples/GxEPD2_Example/GxEPD2_Example.ino
@@ -92,14 +92,28 @@
 
 #endif
 
+#if defined(ARDUINO_ARCH_RP2040) && defined(ARDUINO_RASPBERRY_PI_PICO)
+// SPI pins used by GoodDisplay DESPI-PICO. note: steals standard I2C pins PIN_WIRE_SDA (6), PIN_WIRE_SCL (7)
+// uncomment next line for use with GoodDisplay DESPI-PICO.
+arduino::MbedSPI SPI0(4, 7, 6); // need be valid pins for same SPI channel, else fails blinking 4 long 4 short
+#endif
+
 void setup()
 {
   Serial.begin(115200);
   Serial.println();
   Serial.println("setup");
   delay(100);
+#if defined(ARDUINO_ARCH_RP2040) && defined(ARDUINO_RASPBERRY_PI_PICO)
+  // uncomment next line for use with GoodDisplay DESPI-PICO, or use the extended init method
+  //display.epd2.selectSPI(SPI0, SPISettings(4000000, MSBFIRST, SPI_MODE0));
+  // uncomment next 2 lines to allow recovery from configuration failures
+  pinMode(15, INPUT_PULLUP); // safety pin
+  while (!digitalRead(15)) delay(100); // check safety pin for fail recovery
+#endif
   display.init(115200); // default 10ms reset pulse, e.g. for bare panels with DESPI-C02
   //display.init(115200, true, 2, false); // USE THIS for Waveshare boards with "clever" reset circuit, 2ms reset pulse
+  //display.init(115200, true, 10, false, SPI0, SPISettings(4000000, MSBFIRST, SPI_MODE0)); // extended init method with SPI channel and/or settings selection
   // first update should be full refresh
   helloWorld();
   delay(1000);

diff --git a/examples/GxEPD2_Example/GxEPD2_display_selection_new_style.h b/examples/GxEPD2_Example/GxEPD2_display_selection_new_style.h
@@ -207,8 +207,17 @@ GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> displ
 #elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
 #define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
 #endif
+#if defined(ARDUINO_NANO_RP2040_CONNECT)
 // adapt the constructor parameters to your wiring
 GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7));
 #endif
+#if defined(ARDUINO_RASPBERRY_PI_PICO)
+// adapt the constructor parameters to your wiring
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7)); // my proto board
+// mapping of GoodDisplay DESPI-PICO. NOTE: uses alternate HW SPI pins!
+GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 1, /*BUSY=*/ 0)); // DESPI-PICO
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 11, /*BUSY=*/ 10)); // DESPI-PICO modified
+#endif
+#endif
 
 #endif
diff --git a/examples/GxEPD2_GFX_Example/GxEPD2_display_selection_new_style.h b/examples/GxEPD2_GFX_Example/GxEPD2_display_selection_new_style.h
@@ -207,8 +207,17 @@ GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> displ
 #elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
 #define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
 #endif
+#if defined(ARDUINO_NANO_RP2040_CONNECT)
 // adapt the constructor parameters to your wiring
 GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7));
 #endif
+#if defined(ARDUINO_RASPBERRY_PI_PICO)
+// adapt the constructor parameters to your wiring
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7)); // my proto board
+// mapping of GoodDisplay DESPI-PICO. NOTE: uses alternate HW SPI pins!
+GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 1, /*BUSY=*/ 0)); // DESPI-PICO
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 11, /*BUSY=*/ 10)); // DESPI-PICO modified
+#endif
+#endif
 
 #endif
diff --git a/examples/GxEPD2_HelloWorld/GxEPD2_display_selection_new_style.h b/examples/GxEPD2_HelloWorld/GxEPD2_display_selection_new_style.h
@@ -207,8 +207,17 @@ GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> displ
 #elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
 #define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
 #endif
+#if defined(ARDUINO_NANO_RP2040_CONNECT)
 // adapt the constructor parameters to your wiring
 GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7));
 #endif
+#if defined(ARDUINO_RASPBERRY_PI_PICO)
+// adapt the constructor parameters to your wiring
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7)); // my proto board
+// mapping of GoodDisplay DESPI-PICO. NOTE: uses alternate HW SPI pins!
+GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 1, /*BUSY=*/ 0)); // DESPI-PICO
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 11, /*BUSY=*/ 10)); // DESPI-PICO modified
+#endif
+#endif
 
 #endif
diff --git a/examples/GxEPD2_MinimumExample/GxEPD2_display_selection_new_style.h b/examples/GxEPD2_MinimumExample/GxEPD2_display_selection_new_style.h
@@ -207,8 +207,17 @@ GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> displ
 #elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
 #define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
 #endif
+#if defined(ARDUINO_NANO_RP2040_CONNECT)
 // adapt the constructor parameters to your wiring
 GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7));
 #endif
+#if defined(ARDUINO_RASPBERRY_PI_PICO)
+// adapt the constructor parameters to your wiring
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7)); // my proto board
+// mapping of GoodDisplay DESPI-PICO. NOTE: uses alternate HW SPI pins!
+GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 1, /*BUSY=*/ 0)); // DESPI-PICO
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 11, /*BUSY=*/ 10)); // DESPI-PICO modified
+#endif
+#endif
 
 #endif
diff --git a/examples/GxEPD2_NotPagedExample/GxEPD2_display_selection_new_style.h b/examples/GxEPD2_NotPagedExample/GxEPD2_display_selection_new_style.h
@@ -207,8 +207,17 @@ GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> displ
 #elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
 #define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
 #endif
+#if defined(ARDUINO_NANO_RP2040_CONNECT)
 // adapt the constructor parameters to your wiring
 GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7));
 #endif
+#if defined(ARDUINO_RASPBERRY_PI_PICO)
+// adapt the constructor parameters to your wiring
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7)); // my proto board
+// mapping of GoodDisplay DESPI-PICO. NOTE: uses alternate HW SPI pins!
+GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 1, /*BUSY=*/ 0)); // DESPI-PICO
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 11, /*BUSY=*/ 10)); // DESPI-PICO modified
+#endif
+#endif
 
 #endif
diff --git a/examples/GxEPD2_PagedDisplayUsingCallback/GxEPD2_display_selection_new_style.h b/examples/GxEPD2_PagedDisplayUsingCallback/GxEPD2_display_selection_new_style.h
@@ -207,8 +207,17 @@ GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> displ
 #elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
 #define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
 #endif
+#if defined(ARDUINO_NANO_RP2040_CONNECT)
 // adapt the constructor parameters to your wiring
 GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7));
 #endif
+#if defined(ARDUINO_RASPBERRY_PI_PICO)
+// adapt the constructor parameters to your wiring
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7)); // my proto board
+// mapping of GoodDisplay DESPI-PICO. NOTE: uses alternate HW SPI pins!
+GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 1, /*BUSY=*/ 0)); // DESPI-PICO
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 11, /*BUSY=*/ 10)); // DESPI-PICO modified
+#endif
+#endif
 
 #endif
diff --git a/examples/GxEPD2_RotaryUsingBusyCallback/GxEPD2_display_selection_new_style.h b/examples/GxEPD2_RotaryUsingBusyCallback/GxEPD2_display_selection_new_style.h
@@ -207,8 +207,17 @@ GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> displ
 #elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
 #define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
 #endif
+#if defined(ARDUINO_NANO_RP2040_CONNECT)
 // adapt the constructor parameters to your wiring
 GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7));
 #endif
+#if defined(ARDUINO_RASPBERRY_PI_PICO)
+// adapt the constructor parameters to your wiring
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7)); // my proto board
+// mapping of GoodDisplay DESPI-PICO. NOTE: uses alternate HW SPI pins!
+GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 1, /*BUSY=*/ 0)); // DESPI-PICO
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 11, /*BUSY=*/ 10)); // DESPI-PICO modified
+#endif
+#endif
 
 #endif
diff --git a/examples/GxEPD2_SD_Example/GxEPD2_display_selection_new_style.h b/examples/GxEPD2_SD_Example/GxEPD2_display_selection_new_style.h
@@ -207,8 +207,17 @@ GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> displ
 #elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
 #define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
 #endif
+#if defined(ARDUINO_NANO_RP2040_CONNECT)
 // adapt the constructor parameters to your wiring
 GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7));
 #endif
+#if defined(ARDUINO_RASPBERRY_PI_PICO)
+// adapt the constructor parameters to your wiring
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7)); // my proto board
+// mapping of GoodDisplay DESPI-PICO. NOTE: uses alternate HW SPI pins!
+GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 1, /*BUSY=*/ 0)); // DESPI-PICO
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 11, /*BUSY=*/ 10)); // DESPI-PICO modified
+#endif
+#endif
 
 #endif
diff --git a/examples/GxEPD2_SerialFlash_Example/GxEPD2_display_selection_new_style.h b/examples/GxEPD2_SerialFlash_Example/GxEPD2_display_selection_new_style.h
@@ -207,8 +207,17 @@ GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> displ
 #elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
 #define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
 #endif
+#if defined(ARDUINO_NANO_RP2040_CONNECT)
 // adapt the constructor parameters to your wiring
 GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7));
 #endif
+#if defined(ARDUINO_RASPBERRY_PI_PICO)
+// adapt the constructor parameters to your wiring
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7)); // my proto board
+// mapping of GoodDisplay DESPI-PICO. NOTE: uses alternate HW SPI pins!
+GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 1, /*BUSY=*/ 0)); // DESPI-PICO
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 11, /*BUSY=*/ 10)); // DESPI-PICO modified
+#endif
+#endif
 
 #endif
diff --git a/examples/GxEPD2_Spiffs_Example/GxEPD2_display_selection_new_style.h b/examples/GxEPD2_Spiffs_Example/GxEPD2_display_selection_new_style.h
@@ -207,8 +207,17 @@ GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> displ
 #elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
 #define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
 #endif
+#if defined(ARDUINO_NANO_RP2040_CONNECT)
 // adapt the constructor parameters to your wiring
 GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7));
 #endif
+#if defined(ARDUINO_RASPBERRY_PI_PICO)
+// adapt the constructor parameters to your wiring
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7)); // my proto board
+// mapping of GoodDisplay DESPI-PICO. NOTE: uses alternate HW SPI pins!
+GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 1, /*BUSY=*/ 0)); // DESPI-PICO
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 11, /*BUSY=*/ 10)); // DESPI-PICO modified
+#endif
+#endif
 
 #endif
diff --git a/examples/GxEPD2_U8G2_Fonts_Example/GxEPD2_display_selection_new_style.h b/examples/GxEPD2_U8G2_Fonts_Example/GxEPD2_display_selection_new_style.h
@@ -207,8 +207,17 @@ GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> displ
 #elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
 #define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
 #endif
+#if defined(ARDUINO_NANO_RP2040_CONNECT)
 // adapt the constructor parameters to your wiring
 GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7));
 #endif
+#if defined(ARDUINO_RASPBERRY_PI_PICO)
+// adapt the constructor parameters to your wiring
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7)); // my proto board
+// mapping of GoodDisplay DESPI-PICO. NOTE: uses alternate HW SPI pins!
+GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 1, /*BUSY=*/ 0)); // DESPI-PICO
+//GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 11, /*BUSY=*/ 10)); // DESPI-PICO modified
+#endif
+#endif
 
 #endif
diff --git a/extras/sw_spi/src/GxEPD2_EPD.h b/extras/sw_spi/src/GxEPD2_EPD.h
@@ -101,6 +101,7 @@ class GxEPD2_EPD
     {
       return (a > b ? a : b);
     };
+    void selectSPI(SPIClass& spi, SPISettings spi_settings){};
   protected:
     void _reset();
     void _writeDataPGM(const uint8_t* data, uint16_t n, int16_t fill_with_zeroes = 0);

diff --git a/library.properties b/library.properties
@@ -1,5 +1,5 @@
 name=GxEPD2
-version=1.4.2
+version=1.4.3
 author=Jean-Marc Zingg
 maintainer=Jean-Marc Zingg
 sentence=Arduino Display Library for SPI E-Paper displays from Dalian Good Display and Waveshare. 

diff --git a/src/GxEPD2_3C.h b/src/GxEPD2_3C.h
@@ -139,6 +139,18 @@ class GxEPD2_3C : public GxEPD2_GFX_BASE_CLASS
       setFullWindow();
     }
 
+    // init method with additional parameters:
+    // SPIClass& spi: either SPI or alternate HW SPI channel
+    // SPISettings spi_settings: e.g. for higher SPI speed selection
+    void init(uint32_t serial_diag_bitrate, bool initial, uint16_t reset_duration, bool pulldown_rst_mode, SPIClass& spi, SPISettings spi_settings)
+    {
+      epd2.selectSPI(spi, spi_settings);
+      epd2.init(serial_diag_bitrate, initial, reset_duration, pulldown_rst_mode);
+      _using_partial_mode = false;
+      _current_page = 0;
+      setFullWindow();
+    }
+
     void fillScreen(uint16_t color) // 0x0 black, >0x0 white, to buffer
     {
       uint8_t black = 0xFF;

diff --git a/src/GxEPD2_7C.h b/src/GxEPD2_7C.h
@@ -123,6 +123,18 @@ class GxEPD2_7C : public GxEPD2_GFX_BASE_CLASS
       setFullWindow();
     }
 
+    // init method with additional parameters:
+    // SPIClass& spi: either SPI or alternate HW SPI channel
+    // SPISettings spi_settings: e.g. for higher SPI speed selection
+    void init(uint32_t serial_diag_bitrate, bool initial, uint16_t reset_duration, bool pulldown_rst_mode, SPIClass& spi, SPISettings spi_settings)
+    {
+      epd2.selectSPI(spi, spi_settings);
+      epd2.init(serial_diag_bitrate, initial, reset_duration, pulldown_rst_mode);
+      _using_partial_mode = false;
+      _current_page = 0;
+      setFullWindow();
+    }
+
     void fillScreen(uint16_t color)
     {
       uint8_t pv = color7(color);

diff --git a/src/GxEPD2_BW.h b/src/GxEPD2_BW.h
@@ -163,6 +163,18 @@ class GxEPD2_BW : public GxEPD2_GFX_BASE_CLASS
       setFullWindow();
     }
 
+    // init method with additional parameters:
+    // SPIClass& spi: either SPI or alternate HW SPI channel
+    // SPISettings spi_settings: e.g. for higher SPI speed selection
+    void init(uint32_t serial_diag_bitrate, bool initial, uint16_t reset_duration, bool pulldown_rst_mode, SPIClass& spi, SPISettings spi_settings)
+    {
+      epd2.selectSPI(spi, spi_settings);
+      epd2.init(serial_diag_bitrate, initial, reset_duration, pulldown_rst_mode);
+      _using_partial_mode = false;
+      _current_page = 0;
+      setFullWindow();
+    }
+
     void fillScreen(uint16_t color) // 0x0 black, >0x0 white, to buffer
     {
       uint8_t data = (color == GxEPD_BLACK) ? 0x00 : 0xFF;